diff options
Diffstat (limited to 'src/mainboard/asus/m2v-mx_se/romstage.c')
| -rw-r--r-- | src/mainboard/asus/m2v-mx_se/romstage.c | 183 |
1 files changed, 0 insertions, 183 deletions
diff --git a/src/mainboard/asus/m2v-mx_se/romstage.c b/src/mainboard/asus/m2v-mx_se/romstage.c deleted file mode 100644 index 322f76302f..0000000000 --- a/src/mainboard/asus/m2v-mx_se/romstage.c +++ /dev/null @@ -1,183 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2006 MSI - * (Written by Bingxun Shi <bingxunshi@gmail.com> for MSI) - * Copyright (C) 2008 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -unsigned int get_sbdn(unsigned bus); - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/amd/mtrr.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <halt.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> - -#include <superio/ite/common/ite.h> -#include <superio/ite/it8712f/it8712f.h> -#include <southbridge/via/vt8237r/vt8237r.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <spd.h> -#include <northbridge/amd/amdk8/f.h> - -#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1) -#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO) - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "southbridge/via/k8t890/early_car.c" -#include <northbridge/amd/amdk8/amdk8.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "cpu/amd/dualcore/dualcore.c" -#include "cpu/amd/model_fxx/init_cpus.c" - -#define SB_VFSMAF 0 - -static void ldtstop_sb(void) -{ - printk(BIOS_DEBUG, "toggle LDTSTP#\n"); - - /* fix errata #181, disable DRAM controller it will get enabled later */ - u8 tmp = pci_read_config8(PCI_DEV(0, 0x18, 2), 0x94); - tmp |= (( 1 << 14) | (1 << 3)); - pci_write_config8(PCI_DEV(0, 0x18, 2), 0x94, tmp); - - u8 reg = inb (VT8237R_ACPI_IO_BASE + 0x5c); - reg = reg ^ (1 << 0); - outb(reg, VT8237R_ACPI_IO_BASE + 0x5c); - reg = inb(VT8237R_ACPI_IO_BASE + 0x15); - printk(BIOS_DEBUG, "done\n"); -} - -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/resourcemap.c" - -void do_soft_reset(void) -{ - uint8_t tmp; - - set_bios_reset(); - printk(BIOS_DEBUG, "soft reset\n"); - - /* PCI reset */ - tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f); - tmp |= 0x01; - /* FIXME from S3 set bit1 to disable USB reset VT8237A/S */ - pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp); - - halt(); -} - -unsigned int get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_VT8237R_LPC), bus); - return (dev >> 15) & 0x1f; -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - unsigned bsp_apicid = 0; - int needs_reset = 0; - struct sys_info *sysinfo = &sysinfo_car; - - ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - ite_kill_watchdog(GPIO_DEV); - ite_enable_3vsbsw(GPIO_DEV); - console_init(); - enable_rom_decode(); - - printk(BIOS_INFO, "now booting...\n"); - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - /* Halt if there was a built in self test failure. */ - report_bist_failure(bist); - setup_default_resource_map(); - setup_coherent_ht_domain(); - wait_all_core0_started(); - - printk(BIOS_INFO, "now booting... All core 0 started\n"); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched. */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - init_timer(); - ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ - - needs_reset = optimize_link_coherent_ht(); - printk(BIOS_DEBUG, "%02x", needs_reset); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - printk(BIOS_DEBUG, "%02x", needs_reset); - needs_reset |= k8t890_early_setup_ht(); - printk(BIOS_DEBUG, "%02x", needs_reset); - - vt8237_early_network_init(NULL); - vt8237_early_spi_init(); - - if (needs_reset) { - printk(BIOS_DEBUG, "ht reset -\n"); - soft_reset(); - printk(BIOS_DEBUG, "FAILED!\n"); - } - - /* the HT settings needs to be OK, because link freq chnage may cause HT disconnect */ - /* allow LDT STOP asserts */ - vt8237_sb_enable_fid_vid(); - - enable_fid_change(); - printk(BIOS_DEBUG, "after enable_fid_change\n"); - - init_fidvid_bsp(bsp_apicid); - - /* Stop the APs so we can start them later in init. */ - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl now. */ - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - enable_smbus(); - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); -} |