diff options
Diffstat (limited to 'src/mainboard/asus/p5gc-mx/romstage.c')
-rw-r--r-- | src/mainboard/asus/p5gc-mx/romstage.c | 275 |
1 files changed, 275 insertions, 0 deletions
diff --git a/src/mainboard/asus/p5gc-mx/romstage.c b/src/mainboard/asus/p5gc-mx/romstage.c new file mode 100644 index 0000000000..9be061f0a8 --- /dev/null +++ b/src/mainboard/asus/p5gc-mx/romstage.c @@ -0,0 +1,275 @@ +/* + * This file is part of the coreboot project. + * + * Copyright (C) 2007-2008 coresystems GmbH + * Copyright (C) 2016 Arthur Heymans arthur@aheymans.xyz + * Copyright (C) 2016 Kyösti Mälkki <kyosti.malkki@gmail.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +// __PRE_RAM__ means: use "unsigned" for device, not a struct. + +#include <stdint.h> +#include <string.h> +#include <arch/io.h> +#include <device/pci_def.h> +#include <device/pnp_def.h> +#include <cpu/x86/lapic.h> +#include <lib.h> +#include <arch/acpi.h> +#include <cbmem.h> +#include <superio/winbond/common/winbond.h> +#include <superio/winbond/w83627dhg/w83627dhg.h> +#include <pc80/mc146818rtc.h> +#include <console/console.h> +#include <cpu/x86/bist.h> +#include <cpu/intel/romstage.h> +#include <halt.h> +#include <northbridge/intel/i945/i945.h> +#include <northbridge/intel/i945/raminit.h> +#include <southbridge/intel/i82801gx/i82801gx.h> +#include <cpu/x86/msr.h> +#include <cpu/intel/speedstep.h> +#include <arch/cpu.h> + +#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1) +#define GPIO_DEV PNP_DEV(0x2e, W83627DHG_GPIO2345_V) + +void setup_ich7_gpios(void) +{ + /* TODO: This is highly board specific and should be moved */ + printk(BIOS_DEBUG, " GPIOS..."); + /* General Registers */ + outl(0x1f3dffc1, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */ + outl(0xe0e8f7c2, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */ + outl(0xe2febb7e, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */ + /* Output Control Registers */ + outl(0x00000000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */ + /* Input Control Registers */ + outl(0x00006000, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */ + outl(0x000000ff, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */ + outl(0x000000f0, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */ + outl(0x00030033, DEFAULT_GPIOBASE + 0x38); /* GP_LVL2 */ +} + +/* + * BSEL0 is connected with GPIO32 + * BSEL1 is connected with GPIO33 with inversed logic + * BSEL2 is connected with GPIO55 + */ +static void setup_sio_gpio(u8 bsel) +{ + int need_reset = 0; + u8 reg, old_reg; + + pnp_enter_ext_func_mode(GPIO_DEV); + pnp_set_logical_device(GPIO_DEV); + + reg = 0x9a; + old_reg = pnp_read_config(GPIO_DEV, 0x2c); + pnp_write_config(GPIO_DEV, 0x2c, reg); + need_reset = (reg != old_reg); + + pnp_write_config(GPIO_DEV, 0x30, 0x0e); + pnp_write_config(GPIO_DEV, 0xe0, 0xde); + pnp_write_config(GPIO_DEV, 0xf0, 0xf3); + pnp_write_config(GPIO_DEV, 0xf4, 0x80); + pnp_write_config(GPIO_DEV, 0xf5, 0x80); + + /* Invert GPIO33 */ + pnp_write_config(GPIO_DEV, 0xf2, 0x08); + + reg = (bsel & 3) << 2; + old_reg = pnp_read_config(GPIO_DEV, 0xf1); + pnp_write_config(GPIO_DEV, 0xf1, reg); + need_reset += ((reg & 0xc) != (old_reg & 0xc)); + + reg = (bsel >> 2) << 5; + old_reg = pnp_read_config(GPIO_DEV, 0xe1); + pnp_write_config(GPIO_DEV, 0xe1, reg); + need_reset += ((reg & 0x20) != (old_reg & 0x20)); + + pnp_exit_ext_func_mode(GPIO_DEV); + + if (need_reset) { + int i = 1000; + while (i--) + outb(i & 0xff, 0x80); + outb(0xe, 0xcf9); + halt(); + } +} + +static u8 msr_get_fsb(void) +{ + u8 fsbcfg; + msr_t msr; + const u32 eax = cpuid_eax(1); + + /* Netburst */ + if (((eax >> 8) & 0xf) == 0xf) { + msr = rdmsr(0x2c); + fsbcfg = (msr.lo >> 16) & 0x7; + } else { /* Intel Core 2 */ + msr = rdmsr(MSR_FSB_FREQ); + fsbcfg = msr.lo & 0x7; + } + + return fsbcfg; +} + +static void ich7_enable_lpc(void) +{ + // Enable Serial IRQ + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0); + // Set COM1/COM2 decode range + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0010); + // Enable COM1 + pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x140f); + // Enable SuperIO Power Management Events + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x84, 0x000c0801); + + /* range 0x15e0 - 0x10ef */ + pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x88, 0x40291); + + +} + +static void rcba_config(void) +{ + /* Enable IOAPIC */ + RCBA8(0x31ff) = 0x03; + + /* Disable unused devices */ + RCBA32(0x3418) = 0x003c0061; + + /* Enable PCIe Root Port Clock Gate */ + RCBA32(0x341c) = 0x00000001; +} + +static void early_ich7_init(void) +{ + uint8_t reg8; + uint32_t reg32; + + // program secondary mlt XXX byte? + pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20); + + // reset rtc power status + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4); + reg8 &= ~(1 << 2); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8); + + // usb transient disconnect + reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad); + reg8 |= (3 << 0); + pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8); + + reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc); + reg32 |= (1 << 29) | (1 << 17); + pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32); + + reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc); + reg32 |= (1 << 31) | (1 << 27); + pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32); + + RCBA32(0x0088) = 0x0011d000; + RCBA16(0x01fc) = 0x060f; + RCBA32(0x01f4) = 0x86000040; + RCBA32(0x0214) = 0x10030509; + RCBA32(0x0218) = 0x00020504; + RCBA8(0x0220) = 0xc5; + reg32 = RCBA32(0x3410); + reg32 |= (1 << 6); + RCBA32(0x3410) = reg32; + reg32 = RCBA32(0x3430); + reg32 &= ~(3 << 0); + reg32 |= (1 << 0); + RCBA32(0x3430) = reg32; + RCBA32(0x3418) |= (1 << 0); + RCBA16(0x0200) = 0x2008; + RCBA8(0x2027) = 0x0d; + RCBA16(0x3e08) |= (1 << 7); + RCBA16(0x3e48) |= (1 << 7); + RCBA32(0x3e0e) |= (1 << 7); + RCBA32(0x3e4e) |= (1 << 7); + + // next step only on ich7m b0 and later: + reg32 = RCBA32(0x2034); + reg32 &= ~(0x0f << 16); + reg32 |= (5 << 16); + RCBA32(0x2034) = reg32; +} + +void mainboard_romstage_entry(unsigned long bist) +{ + int s3resume = 0, boot_mode = 0; + + u8 m_bsel; + u8 c_bsel = msr_get_fsb(); + + if (bist == 0) + enable_lapic(); + + ich7_enable_lpc(); + + winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + + setup_sio_gpio(c_bsel); + + /* Set up the console */ + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + + if (MCHBAR16(SSKPD) == 0xCAFE) { + printk(BIOS_DEBUG, "soft reset detected.\n"); + boot_mode = 1; + } + + /* Perform some early chipset initialization required + * before RAM initialization can work + */ + i945_early_initialization(); + + m_bsel = MCHBAR32(CLKCFG) & 7; + printk(BIOS_DEBUG, "CPU BSEL: 0x%x\n MCH BSEL: 0x%x\n", c_bsel, m_bsel); + if (c_bsel != m_bsel) { /* Should not happen */ + printk(BIOS_DEBUG, "Setting BSEL straps, resetting...\n"); + outb(0xe, 0xcf9); + halt(); + } + + s3resume = southbridge_detect_s3_resume(); + + /* Enable SPD ROMs and DDR-II DRAM */ + enable_smbus(); + +#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8 + dump_spd_registers(); +#endif + sdram_initialize(s3resume ? 2 : boot_mode, NULL); + + /* Perform some initialization that must run before stage2 */ + early_ich7_init(); + + /* This should probably go away. Until now it is required + * and mainboard specific + */ + rcba_config(); + + /* Chipset Errata! */ + fixup_i945_errata(); + + /* Initialize the internal PCIe links before we go into stage2 */ + i945_late_initialization(s3resume); +} |