summaryrefslogtreecommitdiff
path: root/src/mainboard/asus/p5ql-em
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/asus/p5ql-em')
-rw-r--r--src/mainboard/asus/p5ql-em/romstage.c51
1 files changed, 15 insertions, 36 deletions
diff --git a/src/mainboard/asus/p5ql-em/romstage.c b/src/mainboard/asus/p5ql-em/romstage.c
index c7ade1c541..fa22a645d4 100644
--- a/src/mainboard/asus/p5ql-em/romstage.c
+++ b/src/mainboard/asus/p5ql-em/romstage.c
@@ -12,22 +12,22 @@
* GNU General Public License for more details.
*/
-#include <device/pci_ops.h>
#include <device/pnp_ops.h>
#include <console/console.h>
-#include <southbridge/intel/i82801jx/i82801jx.h>
-#include <southbridge/intel/common/pmclib.h>
#include <northbridge/intel/x4x/x4x.h>
#include <cpu/x86/msr.h>
#include <cpu/intel/speedstep.h>
-#include <arch/romstage.h>
#include <cf9_reset.h>
#include <superio/winbond/w83627dhg/w83627dhg.h>
#include <superio/winbond/common/winbond.h>
#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1)
#define GPIO_DEV PNP_DEV(0x2e, W83627DHG_GPIO2345_V)
-#define LPC_DEV PCI_DEV(0, 0x1f, 0)
+
+void mb_lpc_setup(void)
+{
+ winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
+}
static u8 msr_get_fsb(void)
{
@@ -103,41 +103,20 @@ static int setup_sio_gpio(void)
return need_reset;
}
-void mainboard_romstage_entry(void)
+void mb_pre_raminit_setup(int s3_resume)
{
- /* This board has first dimm slot of each channel hooked up to
- rank0 and rank1, while the second dimm slot is only connected
- to rank1. The raminit does not support such setups
- const u8 spd_addrmap[4] = { 0x50, 0x51, 0x52, 0x53 }; */
- const u8 spd_addrmap[4] = { 0x50, 0, 0x52, 0 };
- u8 boot_path = 0;
- u8 s3_resume;
-
- /* Set southbridge and Super I/O GPIOs. */
- i82801jx_lpc_setup();
- winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-
- console_init();
-
- enable_smbus();
-
- i82801jx_early_init();
- x4x_early_init();
-
- s3_resume = southbridge_detect_s3_resume();
- if (s3_resume)
- boot_path = BOOT_PATH_RESUME;
- if (MCHBAR32(PMSTS_MCHBAR) & PMSTS_WARM_RESET)
- boot_path = BOOT_PATH_WARM_RESET;
-
if (!s3_resume && setup_sio_gpio()) {
printk(BIOS_DEBUG, "Needs reset to configure CPU BSEL straps\n");
full_reset();
}
+}
- sdram_initialize(boot_path, spd_addrmap);
-
- x4x_late_init(s3_resume);
-
- printk(BIOS_DEBUG, "x4x late init complete\n");
+void mb_get_spd_map(u8 spd_map[4])
+{
+ /* This board has first dimm slot of each channel hooked up to
+ rank0 and rank1, while the second dimm slot is only connected
+ to rank1. The raminit does not support such setups. So only the
+ first dimms of each channel are used. */
+ spd_map[0] = 0x50;
+ spd_map[2] = 0x52;
}