diff options
Diffstat (limited to 'src/mainboard/asus/p8z77-m_pro/cmos.layout')
-rw-r--r-- | src/mainboard/asus/p8z77-m_pro/cmos.layout | 150 |
1 files changed, 0 insertions, 150 deletions
diff --git a/src/mainboard/asus/p8z77-m_pro/cmos.layout b/src/mainboard/asus/p8z77-m_pro/cmos.layout deleted file mode 100644 index 3d717b444d..0000000000 --- a/src/mainboard/asus/p8z77-m_pro/cmos.layout +++ /dev/null @@ -1,150 +0,0 @@ -## SPDX-License-Identifier: GPL-2.0-only - -# ----------------------------------------------------------------- -entries - -# ----------------------------------------------------------------- -0 120 r 0 reserved_memory - -# ----------------------------------------------------------------- -# RTC_BOOT_BYTE (coreboot hardcoded) -384 1 e 3 boot_option -388 4 h 0 reboot_counter - -# ----------------------------------------------------------------- -# coreboot config options: console -395 4 e 4 debug_level -#400 8 r 0 reserved for century byte - -# ----------------------------------------------------------------- -# coreboot config options: southbridge - -# Non Maskable Interrupt(NMI) support, which is an interrupt that may -# occur on a RAM or unrecoverable error. -408 1 e 1 nmi - -409 2 e 5 power_on_after_fail -411 1 e 6 sata_mode - -# ----------------------------------------------------------------- -# coreboot config options: northbridge - -# gfx_uma_size -# Quantity of shared video memory the IGP can use -# -416 5 e 7 gfx_uma_size - -# ----------------------------------------------------------------- -# coreboot config options: usb3 - -# usb3_mode -# Controls how the motherboard's USB3 ports act at boot time -421 2 e 8 usb3_mode - -# usb3_drv -# Load (or not) pre-OS xHCI USB3 BIOS driver -# -423 1 e 1 usb3_drv - -# usb3_streams -# Streams can provide more speed (as they can use 64Kb packets), -# but they might cause incompatibilities with some devices. -# -424 1 e 1 usb3_streams - -# ----------------------------------------------------------------- -# Sandy/Ivy Bridge MRC Scrambler Seed values -# note: MUST NOT be covered by checksum! -464 32 r 0 mrc_scrambler_seed -496 32 r 0 mrc_scrambler_seed_s3 -528 16 r 0 mrc_scrambler_seed_chk - -# ----------------------------------------------------------------- -# coreboot config options: check sums -544 16 h 0 check_sum - -# ----------------------------------------------------------------- - -enumerations -#ID value text - -# Generic on/off enum -1 0 Disable -1 1 Enable - -# boot_option -3 0 Fallback -3 1 Normal - -# debug_level -4 0 Emergency -4 1 Alert -4 2 Critical -4 3 Error -4 4 Warning -4 5 Notice -4 6 Info -4 7 Debug -4 8 Spew - -# power_on_after_fail -5 0 Disable -5 1 Enable -5 2 Keep - -# sata_mode -6 0 AHCI -6 1 Compatible - -# gfx_uma_size (Intel IGP Video RAM size) -7 0 32M -7 1 64M -7 2 96M -7 3 128M -7 4 160M -7 5 192M -7 6 224M -7 7 256M -7 8 288M -7 9 320M -7 10 352M -7 11 384M -7 12 416M -7 13 448M -7 14 480M -7 15 512M -7 16 544M -7 17 576M -7 18 608M -7 19 640M -7 20 672M -7 21 704M -7 22 736M -7 23 768M -7 24 800M -7 25 832M -7 26 864M -7 27 896M -7 28 928M -7 29 960M -7 30 992M - -# usb3_mode -# Disable = Use the port always as USB 2.0 for compatibility -# Enable = Use the port always as USB 3.0 for speed -# Auto = Initialize the port as USB 2.0, until the OS loads -# xHCI USB 3.0 driver -# SmartAuto = Same as Auto but, if the OS loads the xHCI USB 3.0 driver -# and the computer is reset, keep the USB 3.0 mode. -# -8 0 Disable -8 1 Enable -8 2 Auto -8 3 SmartAuto - -# ----------------------------------------------------------------- -# <startBit[must be byte-aligned]> <endBit[must be byte aligned]> -# <bit where to start storing checksum[must be 16bits-aligned]> -checksums - -checksum 392 431 544 |