diff options
Diffstat (limited to 'src/mainboard/asus/p8z77-series/variants/p8z77-m_pro/cmos.layout')
-rw-r--r-- | src/mainboard/asus/p8z77-series/variants/p8z77-m_pro/cmos.layout | 150 |
1 files changed, 150 insertions, 0 deletions
diff --git a/src/mainboard/asus/p8z77-series/variants/p8z77-m_pro/cmos.layout b/src/mainboard/asus/p8z77-series/variants/p8z77-m_pro/cmos.layout new file mode 100644 index 0000000000..3d717b444d --- /dev/null +++ b/src/mainboard/asus/p8z77-series/variants/p8z77-m_pro/cmos.layout @@ -0,0 +1,150 @@ +## SPDX-License-Identifier: GPL-2.0-only + +# ----------------------------------------------------------------- +entries + +# ----------------------------------------------------------------- +0 120 r 0 reserved_memory + +# ----------------------------------------------------------------- +# RTC_BOOT_BYTE (coreboot hardcoded) +384 1 e 3 boot_option +388 4 h 0 reboot_counter + +# ----------------------------------------------------------------- +# coreboot config options: console +395 4 e 4 debug_level +#400 8 r 0 reserved for century byte + +# ----------------------------------------------------------------- +# coreboot config options: southbridge + +# Non Maskable Interrupt(NMI) support, which is an interrupt that may +# occur on a RAM or unrecoverable error. +408 1 e 1 nmi + +409 2 e 5 power_on_after_fail +411 1 e 6 sata_mode + +# ----------------------------------------------------------------- +# coreboot config options: northbridge + +# gfx_uma_size +# Quantity of shared video memory the IGP can use +# +416 5 e 7 gfx_uma_size + +# ----------------------------------------------------------------- +# coreboot config options: usb3 + +# usb3_mode +# Controls how the motherboard's USB3 ports act at boot time +421 2 e 8 usb3_mode + +# usb3_drv +# Load (or not) pre-OS xHCI USB3 BIOS driver +# +423 1 e 1 usb3_drv + +# usb3_streams +# Streams can provide more speed (as they can use 64Kb packets), +# but they might cause incompatibilities with some devices. +# +424 1 e 1 usb3_streams + +# ----------------------------------------------------------------- +# Sandy/Ivy Bridge MRC Scrambler Seed values +# note: MUST NOT be covered by checksum! +464 32 r 0 mrc_scrambler_seed +496 32 r 0 mrc_scrambler_seed_s3 +528 16 r 0 mrc_scrambler_seed_chk + +# ----------------------------------------------------------------- +# coreboot config options: check sums +544 16 h 0 check_sum + +# ----------------------------------------------------------------- + +enumerations +#ID value text + +# Generic on/off enum +1 0 Disable +1 1 Enable + +# boot_option +3 0 Fallback +3 1 Normal + +# debug_level +4 0 Emergency +4 1 Alert +4 2 Critical +4 3 Error +4 4 Warning +4 5 Notice +4 6 Info +4 7 Debug +4 8 Spew + +# power_on_after_fail +5 0 Disable +5 1 Enable +5 2 Keep + +# sata_mode +6 0 AHCI +6 1 Compatible + +# gfx_uma_size (Intel IGP Video RAM size) +7 0 32M +7 1 64M +7 2 96M +7 3 128M +7 4 160M +7 5 192M +7 6 224M +7 7 256M +7 8 288M +7 9 320M +7 10 352M +7 11 384M +7 12 416M +7 13 448M +7 14 480M +7 15 512M +7 16 544M +7 17 576M +7 18 608M +7 19 640M +7 20 672M +7 21 704M +7 22 736M +7 23 768M +7 24 800M +7 25 832M +7 26 864M +7 27 896M +7 28 928M +7 29 960M +7 30 992M + +# usb3_mode +# Disable = Use the port always as USB 2.0 for compatibility +# Enable = Use the port always as USB 3.0 for speed +# Auto = Initialize the port as USB 2.0, until the OS loads +# xHCI USB 3.0 driver +# SmartAuto = Same as Auto but, if the OS loads the xHCI USB 3.0 driver +# and the computer is reset, keep the USB 3.0 mode. +# +8 0 Disable +8 1 Enable +8 2 Auto +8 3 SmartAuto + +# ----------------------------------------------------------------- +# <startBit[must be byte-aligned]> <endBit[must be byte aligned]> +# <bit where to start storing checksum[must be 16bits-aligned]> +checksums + +checksum 392 431 544 |