summaryrefslogtreecommitdiff
path: root/src/mainboard/bap/ode_e20XX
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/bap/ode_e20XX')
-rw-r--r--src/mainboard/bap/ode_e20XX/BAP_Q7.spd.hex (renamed from src/mainboard/bap/ode_e20XX/Micron_MT41J128M16JT.spd.hex)103
-rw-r--r--src/mainboard/bap/ode_e20XX/Kconfig1
-rw-r--r--src/mainboard/bap/ode_e20XX/Makefile.inc2
-rw-r--r--src/mainboard/bap/ode_e20XX/PlatformGnbPcie.c14
-rw-r--r--src/mainboard/bap/ode_e20XX/acpi/superio.asl34
-rw-r--r--src/mainboard/bap/ode_e20XX/devicetree.cb67
-rw-r--r--src/mainboard/bap/ode_e20XX/romstage.c14
7 files changed, 183 insertions, 52 deletions
diff --git a/src/mainboard/bap/ode_e20XX/Micron_MT41J128M16JT.spd.hex b/src/mainboard/bap/ode_e20XX/BAP_Q7.spd.hex
index 08736f6b9e..fff7cc1fda 100644
--- a/src/mainboard/bap/ode_e20XX/Micron_MT41J128M16JT.spd.hex
+++ b/src/mainboard/bap/ode_e20XX/BAP_Q7.spd.hex
@@ -2,6 +2,8 @@
# This file is part of the coreboot project.
#
# Copyright (C) 2014 Sage Electronic Engineering, LLC.
+# Copyright (C) 2015 BAP - Bruhnspace Advanced Projects
+# (Written by Fabian Kunkel <fabi@adv.bruhnspace.com> for BAP)
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -16,21 +18,17 @@
# along with this program; if not, write to the Free Software
# Foundation, Inc.
-# Gizmo2 has 1GB using 4 Micron_MT41J128M16JT-125 chips
-# The datasheet is available at:
-# http://download.micron.com/pdf/datasheets/dram/ddr3/2Gb_DDR3_SDRAM.pdf
-
-# SPD contents for Gizmo2 2GB DDR3 (1600MHz PC3-12800) soldered down
+# BAP ODE E20XX has 2GB ram soldered down on the Q7
# 0 Number of SPD Bytes used / Total SPD Size / CRC Coverage
# bits[3:0]: 1 = 128 SPD Bytes Used
# bits[6:4]: 1 = 256 SPD Bytes Total
# bit7 : 0 = CRC covers bytes 0 ~ 125
-11
+92
# 1 SPD Revision -
# 0x10 = Revision 1.0
-10
+12
# 2 Key Byte / DRAM Device Type
# bits[7:0]: 0x0b = DDR3 SDRAM
@@ -45,13 +43,13 @@
# bits[3:0]: 3 = 2 Gigabits Total SDRAM capacity per chip
# bits[6:4]: 0 = 3 (8 banks)
# bit7 : reserved
-03
+04
# 5 SDRAM Addressing
# bits[2:0]: 1 = 10 Column Address Bits
# bits[5:3]: 2 = 14 Row Address Bits
# bits[7:6]: reserved
-11
+19
# 6 Module Nominal Voltage, VDD
# bit0 : 0 = 1.5 V operable
@@ -70,7 +68,7 @@
# bits[2:0]: 3 = Primary bus width is 64 bits
# bits[4:3]: 0 = 0 bits (no bus width extension)
# bits[7:5]: reserved
-03
+08
# 9 Fine Timebase (FTB) Dividend / Divisor
# bits[3:0]: 0x02 divisor
@@ -85,7 +83,7 @@
# 12 SDRAM Minimum Cycle Time (tCKmin)
# 0x0a = tCKmin of 1.25 ns = DDR3-1600 (800 MHz clock)
-0A
+0C
# 13 Reserved
00
@@ -93,11 +91,11 @@
# 14 CAS Latencies Supported, Least Significant Byte
# 15 CAS Latencies Supported, Most Significant Byte
# Cas Latencies of 11 - 5 are supported
-FE 00
+7E 00
# 16 Minimum CAS Latency Time (tAAmin)
# 0x6E = 13.75ns - DDR3-1600K
-6E
+69
# 17 Minimum Write Recovery Time (tWRmin)
# 0x78 = tWR of 15ns - All DDR3 speed grades
@@ -105,7 +103,7 @@ FE 00
# 18 Minimum RAS# to CAS# Delay Time (tRCDmin)
# 0x6E = 13.75ns - DDR3-1600K
-6E
+69
# 19 Minimum Row Active to Row Active Delay Time (tRRDmin)
# 0x3C = 7.5ns
@@ -113,7 +111,7 @@ FE 00
# 20 Minimum Row Precharge Delay Time (tRPmin)
# 0x6E = 13.75ns - DDR3-1600K
-6E
+69
# 21 Upper Nibbles for tRAS and tRC
# bits[3:0]: tRAS most significant nibble = 1 (see byte 22)
@@ -122,16 +120,16 @@ FE 00
# 22 Minimum Active to Precharge Delay Time (tRASmin), LSB
# 0x118 = 35ns - DDR3-1600 (see byte 21)
-18
+20
# 23 Minimum Active to Active/Refresh Delay Time (tRCmin), LSB
# 0x186 = 48.75ns - DDR3-1600K
-86
+89
# 24 Minimum Refresh Recovery Delay Time (tRFCmin), LSB
# 25 Minimum Refresh Recovery Delay Time (tRFCmin), MSB
# 0x500 = 160ns - for 2 Gigabit chips
-00 05
+20 08
# 26 Minimum Internal Write to Read Command Delay Time (tWTRmin)
# 0x3c = 7.5 ns - All DDR3 SDRAM speed bins
@@ -144,7 +142,7 @@ FE 00
# 28 Upper Nibble for tFAWmin
# 29 Minimum Four Activate Window Delay Time (tFAWmin)
# 0x0140 = 40ns - DDR3-1600, 2 KB page size
-01 40
+01 68
# 30 SDRAM Optional Feature
# bit0 : 1= RZQ/6 supported
@@ -160,7 +158,7 @@ FE 00
# bit3 : 0 = no on die thermal sensor
# bits[6:4]: reserved
# bit7 : 0 = partial self refresh supported
-05
+01
# 32 Module Thermal Sensor
# 0 = Thermal sensor not incorporated onto this assembly
@@ -188,18 +186,18 @@ FE 00
# 60 Raw Card Extension, Module Nominal Height
# bits[4:0]: 0 = <= 15mm tall
# bits[7:5]: 0 = raw card revision 0-3
-00
+0f
# 61 Module Maximum Thickness
# bits[3:0]: 0 = thickness front <= 1mm
# bits[7:4]: 0 = thinkness back <= 1mm
-00
+11
# 62 Reference Raw Card Used
# bits[4:0]: 0 = Reference Raw card A used
# bits[6:5]: 0 = revision 0
# bit7 : 0 = Reference raw cards A through AL
-00
+22
# 63 Address Mapping from Edge Connector to DRAM
# bit0 : 0 = standard mapping (not mirrored)
@@ -217,19 +215,68 @@ FE 00
# 117 - 118 Module ID: Module Manufacturers JEDEC ID Code
# 0x0001 = AMD
-00 01
+80 AD
# 119 Module ID: Module Manufacturing Location - oem specified
# 120 Module ID: Module Manufacture Year in BCD
# 0x13 = 2013
-00 13
+01 00
# 121 Module ID: Module Manufacture week
# 0x12 = 12th week
-12
+00
# 122 - 125: Module Serial Number
-53 41 47 45
+00 00 00 00
# 126 - 127: Cyclical Redundancy Code
-00 00
+D4 51
+
+# Coreboot is only interested in the first 128 values
+#128 - 135
+48 4d 54 34 32 35 53 36
+
+#136 - 143
+4d 46 52 36 43 2d 48 39
+
+#144 - 151
+20 20 4e 30 80 ad 00 00
+
+#152 - 159
+00 00 00 00 00 00 00 00
+
+#160 - 167
+00 00 00 00 00 00 00 00
+
+#168 - 175
+00 00 00 00 00 00 00 00
+
+#176 - 183
+00 00 00 00 00 00 00 00
+
+#184 - 191
+00 00 00 00 00 00 00 00
+
+#192 - 199
+00 00 00 00 00 00 00 00
+
+#200 - 207
+00 00 00 00 00 00 00 00
+
+#208 - 215
+00 00 00 00 00 00 00 00
+
+#216 - 223
+00 00 00 00 00 00 00 00
+
+#224 - 231
+00 00 00 00 00 00 00 00
+
+#232 - 239
+00 00 00 00 00 00 00 00
+
+#240 - 247
+00 00 00 00 00 00 00 00
+
+#248 - 255
+00 00 00 00 00 00 00 00 \ No newline at end of file
diff --git a/src/mainboard/bap/ode_e20XX/Kconfig b/src/mainboard/bap/ode_e20XX/Kconfig
index 94ad97b45d..15face5ef0 100644
--- a/src/mainboard/bap/ode_e20XX/Kconfig
+++ b/src/mainboard/bap/ode_e20XX/Kconfig
@@ -31,6 +31,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select HAVE_ACPI_TABLES
select BOARD_ROMSIZE_KB_4096
select GFXUMA
+ select SUPERIO_FINTEK_F81866D
select SPD_CACHE
config MAINBOARD_DIR
diff --git a/src/mainboard/bap/ode_e20XX/Makefile.inc b/src/mainboard/bap/ode_e20XX/Makefile.inc
index 6bbb85aa48..13523dd12d 100644
--- a/src/mainboard/bap/ode_e20XX/Makefile.inc
+++ b/src/mainboard/bap/ode_e20XX/Makefile.inc
@@ -30,7 +30,7 @@ ramstage-y += PlatformGnbPcie.c
SPD_BIN = $(obj)/spd.bin
# Order of names in SPD_SOURCES is important!
-SPD_SOURCES = Micron_MT41J128M16JT
+SPD_SOURCES = BAP_Q7
SPD_DEPS := $(foreach f, $(SPD_SOURCES), src/mainboard/$(MAINBOARDDIR)/$(f).spd.hex)
diff --git a/src/mainboard/bap/ode_e20XX/PlatformGnbPcie.c b/src/mainboard/bap/ode_e20XX/PlatformGnbPcie.c
index 66bebc2ce5..a2826990f1 100644
--- a/src/mainboard/bap/ode_e20XX/PlatformGnbPcie.c
+++ b/src/mainboard/bap/ode_e20XX/PlatformGnbPcie.c
@@ -32,7 +32,7 @@ static const PCIe_PORT_DESCRIPTOR PortList [] = {
0,
PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 3, 3),
PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 5,
- HotplugDisabled,
+ HotplugBasic,
PcieGenMaxSupported,
PcieGenMaxSupported,
AspmDisabled, 0x01, 0)
@@ -42,7 +42,7 @@ static const PCIe_PORT_DESCRIPTOR PortList [] = {
0,
PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 2, 2),
PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 4,
- HotplugDisabled,
+ HotplugBasic,
PcieGenMaxSupported,
PcieGenMaxSupported,
AspmDisabled, 0x02, 0)
@@ -72,7 +72,7 @@ static const PCIe_PORT_DESCRIPTOR PortList [] = {
DESCRIPTOR_TERMINATE_LIST,
PCIE_ENGINE_DATA_INITIALIZER (PciePortEngine, 4, 7),
PCIE_PORT_DATA_INITIALIZER_V2 (PortEnabled, ChannelTypeExt6db, 2, 1,
- HotplugDisabled,
+ HotplugBasic,
PcieGenMaxSupported,
PcieGenMaxSupported,
AspmDisabled, 0x05, 0)
@@ -80,17 +80,17 @@ static const PCIe_PORT_DESCRIPTOR PortList [] = {
};
static const PCIe_DDI_DESCRIPTOR DdiList [] = {
- /* DP0 to HDMI0/DP */
+ /* eDP0 to LVDS connector*/
{
0,
PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 8, 11),
- PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux1, Hdp1)
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux1, Hdp1)
},
- /* DP1 to high-speed edge connector */
+ /* DP1 to HDMI */
{
DESCRIPTOR_TERMINATE_LIST,
PCIE_ENGINE_DATA_INITIALIZER (PcieDdiEngine, 12, 15),
- PCIE_DDI_DATA_INITIALIZER (ConnectorTypeDP, Aux2, Hdp2)
+ PCIE_DDI_DATA_INITIALIZER (ConnectorTypeHDMI, Aux2, Hdp2)
},
};
diff --git a/src/mainboard/bap/ode_e20XX/acpi/superio.asl b/src/mainboard/bap/ode_e20XX/acpi/superio.asl
index 97304f9cc4..1c5b3cd766 100644
--- a/src/mainboard/bap/ode_e20XX/acpi/superio.asl
+++ b/src/mainboard/bap/ode_e20XX/acpi/superio.asl
@@ -2,6 +2,8 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2013 Sage Electronic Engineering, LLC
+ * Copyright (C) 2015 BAP - Bruhnspace Advanced Projects
+ * (Written by Fabian Kunkel <fabi@adv.bruhnspace.com> for BAP)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -17,4 +19,34 @@
* Foundation, Inc.
*/
-/* No Super I/O device or functionality yet */
+/* SuperIO support for Windows */
+
+Device (UAR1) {
+ Name (_HID, EISAID ("PNP0501"))
+ Name (_UID, 1)
+ Name (_CRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x03F8, 0x03F8, 0x08, 0x08)
+ IRQNoFlags () {4}
+ })
+ Name (_PRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x03F8, 0x03F8, 0x08, 0x08)
+ IRQNoFlags () {4}
+ })
+}
+
+Device (UAR2) {
+ Name (_HID, EISAID ("PNP0501"))
+ Name (_UID, 2)
+ Name (_CRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x02F8, 0x02F8, 0x08, 0x08)
+ IRQNoFlags () {3}
+ })
+ Name (_PRS, ResourceTemplate ()
+ {
+ IO (Decode16, 0x02F8, 0x02F8, 0x08, 0x08)
+ IRQNoFlags () {3}
+ })
+}
diff --git a/src/mainboard/bap/ode_e20XX/devicetree.cb b/src/mainboard/bap/ode_e20XX/devicetree.cb
index 34c2fd47e2..93f5e73a1e 100644
--- a/src/mainboard/bap/ode_e20XX/devicetree.cb
+++ b/src/mainboard/bap/ode_e20XX/devicetree.cb
@@ -9,7 +9,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -32,11 +32,11 @@ chip northbridge/amd/agesa/family16kb/root_complex
device pci 1.0 on end # Internal Graphics P2P bridge 0x9835
device pci 1.1 on end # Internal Multimedia
device pci 2.0 on end # PCIe Host Bridge
- device pci 2.1 on end # PCIe GFX Bridge
- device pci 2.2 on end # PCIe GPP mini PCIe
- device pci 2.3 on end # PCIe LAN
- device pci 2.4 on end # PCIe x2 to high speed edge connector
- device pci 2.5 on end # PCIe x2 to high speed edge connector
+ device pci 2.1 on end # x4 PCIe Slot
+ device pci 2.2 on end # PCIe Q7 Realtek GBit LAN
+ device pci 2.3 on end # PCIe CB Realtek GBit LAN
+ device pci 2.4 on end # PCIe BAP FPGA
+ device pci 2.5 on end # PCIe BAP FPGA (unused, for 050T)
end #chip northbridge/amd/agesa/family16kb
chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus
@@ -48,7 +48,60 @@ chip northbridge/amd/agesa/family16kb/root_complex
device pci 13.2 on end # USB
device pci 14.0 on end # SM
device pci 14.2 on end # HDA 0x4383
- device pci 14.3 on end # LPC 0x439d
+ device pci 14.3 on # LPC 0x439d
+ chip superio/fintek/f81866d
+ register "hwm_amd_tsi_addr" = "0x98" # Set to AMD
+ register "hwm_amd_tsi_control" = "0x02" # Set to AMD
+ register "hwm_fan_select" = "0xC0" # Sets Fan2 to PWM
+ register "hwm_fan_mode" = "0xD5" # Sets FAN1-3 to Auto RPM mode
+ register "hwm_fan3_control" = "0x00" # Fan control 23kHz
+ register "hwm_fan2_temp_map_select" = "0x1E" # Fan control 23kHz
+ register "hwm_fan2_bound1" = "0x3C" # 60°C
+ register "hwm_fan2_bound2" = "0x32" # 50°C
+ register "hwm_fan2_bound3" = "0x28" # 40°C
+ register "hwm_fan2_bound4" = "0x1E" # 30°C
+ register "hwm_fan2_seg1_speed" = "0xFF" # 100%
+ register "hwm_fan2_seg2_speed" = "0xD9" # 85%
+ register "hwm_fan2_seg3_speed" = "0xB2" # 70%
+ register "hwm_fan2_seg4_speed" = "0x99" # 60%
+ register "hwm_fan2_seg5_speed" = "0x80" # 50%
+ register "hwm_temp_sens_type" = "0x04" # Sets temp sensor 1 type to to thermistor
+ device pnp 4e.0 off # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 4e.3 off end # Parallel Port
+ device pnp 4e.4 on # Hardware Monitor
+ io 0x60 = 0x295
+ irq 0x70 = 0
+ end
+ device pnp 4e.5 off # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ end
+ device pnp 4e.6 off end # GPIO
+ device pnp 4e.7 on end # WDT
+ device pnp 4e.a off end # PME
+ device pnp 4e.10 on # COM1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 4e.11 on # COM2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 4e.12 off # COM3
+ end
+ device pnp 4e.13 off # COM4
+ end
+ device pnp 4e.14 off # COM5
+ end
+ device pnp 4e.15 off # COM6
+ end
+ end # f81866d
+ end #LPC
device pci 14.7 on end # SD
end #chip southbridge/amd/hudson
diff --git a/src/mainboard/bap/ode_e20XX/romstage.c b/src/mainboard/bap/ode_e20XX/romstage.c
index 4cfca8e320..2c2c4f1e17 100644
--- a/src/mainboard/bap/ode_e20XX/romstage.c
+++ b/src/mainboard/bap/ode_e20XX/romstage.c
@@ -2,6 +2,8 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2012 Advanced Micro Devices, Inc.
+ * Copyright (C) 2015 BAP - Bruhnspace Advanced Projects
+ * (Written by Fabian Kunkel <fabi@adv.bruhnspace.com> for BAP)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -35,21 +37,16 @@
#include <cpu/x86/lapic.h>
#include <southbridge/amd/agesa/hudson/hudson.h>
#include <cpu/amd/agesa/s3_resume.h>
+#include <superio/fintek/common/fintek.h>
+#include <superio/fintek/f81866d/f81866d.h>
#include "cbmem.h"
+#define SERIAL_DEV1 PNP_DEV(0x4e, F81866D_SP1)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
u32 val;
- /* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for
- * LpcClk[1:0]". To be consistent with Parmer, setting to 4mA
- * even though the register is not documented in the Kabini BKDG.
- * Otherwise the serial output is bad code.
- */
- outb(0xD2, 0xcd6);
- outb(0x00, 0xcd7);
-
amd_initmmio();
/* Set LPC decode enables. */
@@ -62,6 +59,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
post_code(0x30);
post_code(0x31);
+ fintek_enable_serial(SERIAL_DEV1, CONFIG_TTYS0_BASE);
console_init();
}