diff options
Diffstat (limited to 'src/mainboard/bcom')
-rw-r--r-- | src/mainboard/bcom/Kconfig | 3 | ||||
-rw-r--r-- | src/mainboard/bcom/winnet100/Kconfig | 46 | ||||
-rw-r--r-- | src/mainboard/bcom/winnet100/board_info.txt | 4 | ||||
-rw-r--r-- | src/mainboard/bcom/winnet100/devicetree.cb | 56 | ||||
-rw-r--r-- | src/mainboard/bcom/winnet100/irq_tables.c | 121 | ||||
-rw-r--r-- | src/mainboard/bcom/winnet100/romstage.c | 41 |
6 files changed, 0 insertions, 271 deletions
diff --git a/src/mainboard/bcom/Kconfig b/src/mainboard/bcom/Kconfig index 60945d6903..5c7e41bdc0 100644 --- a/src/mainboard/bcom/Kconfig +++ b/src/mainboard/bcom/Kconfig @@ -21,14 +21,11 @@ if VENDOR_BCOM choice prompt "Mainboard model" -config BOARD_BCOM_WINNET100 - bool "WinNET100" config BOARD_BCOM_WINNETP680 bool "WinNET P680" endchoice -source "src/mainboard/bcom/winnet100/Kconfig" source "src/mainboard/bcom/winnetp680/Kconfig" config MAINBOARD_VENDOR diff --git a/src/mainboard/bcom/winnet100/Kconfig b/src/mainboard/bcom/winnet100/Kconfig deleted file mode 100644 index 503c92b63c..0000000000 --- a/src/mainboard/bcom/winnet100/Kconfig +++ /dev/null @@ -1,46 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de> -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; version 2 of the License. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## -if BOARD_BCOM_WINNET100 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_GEODE_GX1 - select NORTHBRIDGE_AMD_GX1 - select SOUTHBRIDGE_AMD_CS5530 - select SUPERIO_NSC_PC97317 - select ROMCC - select HAVE_PIRQ_TABLE - select PIRQ_ROUTE - select UDELAY_TSC - select BOARD_ROMSIZE_KB_256 - -config MAINBOARD_DIR - string - default bcom/winnet100 - -config MAINBOARD_PART_NUMBER - string - default "WinNET100" - -# Soldered NIC, internal USB, no real PCI slots. -config IRQ_SLOT_COUNT - int - default 2 - -endif # BOARD_BCOM_WINNET100 diff --git a/src/mainboard/bcom/winnet100/board_info.txt b/src/mainboard/bcom/winnet100/board_info.txt deleted file mode 100644 index 85e561a2b8..0000000000 --- a/src/mainboard/bcom/winnet100/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Category: settop -Board name: WinNET100 (IGEL-316) -Board URL: http://web.archive.org/web/20031207003521/http://www.igel.co.za/igel_316_compact.htm -Flashrom support: y diff --git a/src/mainboard/bcom/winnet100/devicetree.cb b/src/mainboard/bcom/winnet100/devicetree.cb deleted file mode 100644 index 61a71e6210..0000000000 --- a/src/mainboard/bcom/winnet100/devicetree.cb +++ /dev/null @@ -1,56 +0,0 @@ -chip northbridge/amd/gx1 # Northbridge - device domain 0 on # PCI domain - device pci 0.0 on end # Host bridge - chip southbridge/amd/cs5530 # Southbridge - device pci 0f.0 on end # Ethernet (onboard) - device pci 12.0 on # ISA bridge - chip superio/nsc/pc97317 # Super I/O - device pnp 2e.0 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.1 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.2 on # RTC, Advanced power control (APC) - io 0x60 = 0x70 - irq 0x70 = 8 - end - device pnp 2e.3 off # Floppy (N/A on this board) - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.4 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.5 on # COM2 (used for smartcard reader) - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.6 on # COM1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.7 on # GPIO - io 0x60 = 0xe0 - end - device pnp 2e.8 on # Power management - io 0x60 = 0xe8 - end - end - end - device pci 12.1 off end # SMI - device pci 12.2 on end # IDE - device pci 12.3 on end # Audio - device pci 12.4 on end # VGA (onboard) - device pci 13.0 on end # USB - register "ide0_enable" = "1" - register "ide1_enable" = "0" # Not available/needed on this board - end - end - chip cpu/amd/geode_gx1 # CPU - end -end diff --git a/src/mainboard/bcom/winnet100/irq_tables.c b/src/mainboard/bcom/winnet100/irq_tables.c deleted file mode 100644 index 8d9e157083..0000000000 --- a/src/mainboard/bcom/winnet100/irq_tables.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Juergen Beisert <juergen@kreuzholzen.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/** - * @file - * Interrupt routing description for BCOM's Winnet100 board. - * It was not possible to read back the pirq-Table. In the 0xF segment was - * no string like $PIRQ... - * But the already running 2.4.21 kernel provides eth0 IRQ15 and USB IRQ 11. - * The Realtek was device 0.f.0, the USB 0.13.0. - * - * This is the physical routing on this board: - * - * 5530 USB Network - * northbridge device device - * 00.13.0 00.0f.00 - * ------------------------------------ - * INTA# INTA# n.c. - * INTB# n.c. n.c. - * INTC# n.c. INTA# - * INTD# n.c. n.c. - */ - -#include <arch/pirq_routing.h> - -#define INT_A 0x01 -#define INT_B 0x02 -#define INT_C 0x03 -#define INT_D 0x04 - -/* - * The USB controller should be connected to IRQ11, - * the network controller should be connected to IRQ15. - */ -#define IRQ_BITMAP_LINK0 0x0800 -#define IRQ_BITMAP_LINK1 0x0400 -#define IRQ_BITMAP_LINK2 0x8000 -#define IRQ_BITMAP_LINK3 0x0200 - -/** Reserved interrupt channels for exclusive PCI usage. */ -#define IRQ_DEVOTED_TO_PCI (IRQ_BITMAP_LINK0 | IRQ_BITMAP_LINK2) - -/** - * Routing description. - * Documentation at: http://www.microsoft.com/whdc/archive/pciirq.mspx - */ -static const struct irq_routing_table intel_irq_routing_table = { - .signature = PIRQ_SIGNATURE, /* PIRQ signature */ - .version = PIRQ_VERSION, /* PIRQ version */ - .size = 32 +16 * CONFIG_IRQ_SLOT_COUNT,/* Max. CONFIG_IRQ_SLOT_COUNT devices */ - .rtr_bus = 0x00, /* Interrupt router bus */ - .rtr_devfn = (0x12 << 3) | 0x0, /* Interrupt router device */ - .exclusive_irqs = IRQ_DEVOTED_TO_PCI, /* IRQs devoted to PCI */ - .rtr_vendor = 0x1078, /* Vendor */ - .rtr_device = 0x0100, /* Device */ - .miniport_data = 0, /* Miniport data */ - .checksum = 0xbf + 16, /* Checksum */ - .slots = { - /* - * Definition for "slot#1". There is no real slot, - * the USB device is embedded... - */ - [0] = { - .bus = 0x00, - .devfn = (0x13 << 3) | 0x0, - .irq = { - /* Link Bitmap */ - [0] = { INT_A, IRQ_BITMAP_LINK0 }, - [1] = { INT_B, IRQ_BITMAP_LINK1 }, - [2] = { INT_C, IRQ_BITMAP_LINK2 }, - [3] = { INT_D, IRQ_BITMAP_LINK3 }, - }, - .slot = 0x0, - }, - - /* - * Definition for "slot#3". There is no real slot, - * the network device is soldered... - */ - [1] = { - .bus = 0x00, - .devfn = (0x0f << 3) | 0x0, - .irq = { - /* Link Bitmap */ - [0] = { INT_C, IRQ_BITMAP_LINK2 }, - [1] = { INT_D, IRQ_BITMAP_LINK3 }, - [2] = { INT_A, IRQ_BITMAP_LINK0 }, - [3] = { INT_B, IRQ_BITMAP_LINK1 }, - }, - .slot = 0x0, - } - } -}; - -/** - * Copy the IRQ routing table to memory. - * - * @param[in] addr Destination address (between 0xF0000...0x100000). - * @return TODO. - */ -unsigned long write_pirq_routing_table(unsigned long addr) -{ - return copy_pirq_routing_table(addr, &intel_irq_routing_table); -} diff --git a/src/mainboard/bcom/winnet100/romstage.c b/src/mainboard/bcom/winnet100/romstage.c deleted file mode 100644 index 158a45fbde..0000000000 --- a/src/mainboard/bcom/winnet100/romstage.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 Juergen Beisert <juergen@kreuzholzen.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <stdint.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <console/console.h> -#include "northbridge/amd/gx1/raminit.c" -#include "superio/nsc/pc97317/early_serial.c" -#include "cpu/x86/bist.h" -#include "southbridge/amd/cs5530/enable_rom.c" - -#define SERIAL_DEV PNP_DEV(0x2e, PC97317_SP1) - -#include <cpu/intel/romstage.h> -static void main(unsigned long bist) -{ - pc97317_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - report_bist_failure(bist); - cs5530_enable_rom(); - sdram_init(); -} |