diff options
Diffstat (limited to 'src/mainboard/compulab/intense_pc/devicetree.cb')
-rw-r--r-- | src/mainboard/compulab/intense_pc/devicetree.cb | 201 |
1 files changed, 201 insertions, 0 deletions
diff --git a/src/mainboard/compulab/intense_pc/devicetree.cb b/src/mainboard/compulab/intense_pc/devicetree.cb new file mode 100644 index 0000000000..8b1deb3d40 --- /dev/null +++ b/src/mainboard/compulab/intense_pc/devicetree.cb @@ -0,0 +1,201 @@ +# This file is part of the coreboot project. +# +# Copyright (C) 2017 Hal Martin <hal.martin@gmail.com> +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +chip northbridge/intel/sandybridge # FIXME: check gfx.ndid and gfx.did + register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }" + register "gfx.link_frequency_270_mhz" = "1" + register "gfx.ndid" = "3" + register "gfx.use_spread_spectrum_clock" = "0" + register "gpu_cpu_backlight" = "0x00000000" + register "gpu_dp_b_hotplug" = "4" + register "gpu_dp_c_hotplug" = "4" + register "gpu_dp_d_hotplug" = "4" + register "gpu_panel_port_select" = "0" + register "gpu_panel_power_backlight_off_delay" = "0" + register "gpu_panel_power_backlight_on_delay" = "0" + register "gpu_panel_power_cycle_delay" = "4" + register "gpu_panel_power_down_delay" = "0" + register "gpu_panel_power_up_delay" = "0" + register "gpu_pch_backlight" = "0x00000000" + device cpu_cluster 0x0 on + chip cpu/intel/socket_rPGA989 + device lapic 0x0 on + end + end + chip cpu/intel/model_206ax # FIXME: check all registers + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0xacac off + end + end + end + device domain 0x0 on + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "c2_latency" = "0x0065" + register "docking_supported" = "1" + register "gen1_dec" = "0x0000164d" + register "gen2_dec" = "0x000c0681" + register "gen3_dec" = "0x000406f1" + register "gen4_dec" = "0x000c06a1" + register "gpi7_routing" = "2" + register "p_cnt_throttling_supported" = "1" + register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }" + register "pcie_port_coalesce" = "1" + register "sata_interface_speed_support" = "0x3" + # Intense PC SATA portmap: + # Port 0: internal 2.5" bay + # Port 1: optional FACE module + # Port 2: rear eSATA + # Port 3: rear eSATA + # Port 4: mSATA + # Port 5: optional FACE module + # enable ALL ports (FACE module REQUIRED for ports 1&5) + register "sata_port_map" = "0x3f" + # enable ONLY ports present on stock MintBox/Intense PC + #register "sata_port_map" = "0x1d" + register "superspeed_capable_ports" = "0x0000000f" + register "xhci_overcurrent_mapping" = "0x00000c03" + register "xhci_switchable_ports" = "0x0000000f" + register "spi_uvscc" = "0x2005" + register "spi_lvscc" = "0x2005" + + # USB 3.0 Controller + device pci 14.0 on + subsystemid 0x8086 0x7270 + end + + # Management Engine Interface 1 + device pci 16.0 off + end + + # Management Engine Interface 2 + device pci 16.1 off + end + + # Management Engine IDE-R + device pci 16.2 off + end + + # Management Engine KT + device pci 16.3 off + end + + # Intel Gigabit Ethernet + device pci 19.0 on + end + + # USB2 EHCI #2 + device pci 1a.0 on + subsystemid 0x8086 0x7270 + end + + # High Definition Audio Audio controller + device pci 1b.0 on + subsystemid 0x8086 0x7270 + end + + # PCIe Port #1 + device pci 1c.0 on + subsystemid 0x8086 0x7270 + end + + # PCIe Port #2 + device pci 1c.1 on + subsystemid 0x8086 0x7270 + end + + # PCIe Port #3 + device pci 1c.2 on + subsystemid 0x8086 0x7270 + end + + # PCIe Port #4 + device pci 1c.3 off + end + + # PCIe Port #5 + device pci 1c.4 on + subsystemid 0x8086 0x7270 + end + + # PCIe Port #6 + device pci 1c.5 off + end + + # PCIe Port #7 + device pci 1c.6 off + end + + # PCIe Port #8 + device pci 1c.7 off + end + + # USB2 EHCI #1 + device pci 1d.0 on + subsystemid 0x8086 0x7270 + end + + # PCI bridge + device pci 1e.0 off + end + + # LPC bridge PCI-LPC bridge + device pci 1f.0 on + subsystemid 0x8086 0x7270 + end + + # SATA Controller 1 + device pci 1f.2 on + subsystemid 0x8086 0x7270 + end + + # SMBus + device pci 1f.3 on + subsystemid 0x8086 0x7270 + end + + # SATA Controller 2 + device pci 1f.5 off + end + + # Thermal Unsupported PCI device 8086:1e24 + device pci 1f.6 on + subsystemid 0x8086 0x7270 + end + end + + # Host bridge Host bridge + device pci 00.0 on + subsystemid 0x8086 0x2010 + end + + # PCIe Bridge for discrete graphics PCI device 8086:0151 + device pci 01.0 on + subsystemid 0x8086 0x2010 + end + + # Internal graphics VGA controller + device pci 02.0 on + subsystemid 0x8086 0x2211 + end + + # Unsupported PCI device 8086:0155 + device pci 01.1 on + subsystemid 0x8086 0x2010 + end + end +end |