summaryrefslogtreecommitdiff
path: root/src/mainboard/dell
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/dell')
-rw-r--r--src/mainboard/dell/s1850/auto.c31
-rw-r--r--src/mainboard/dell/s1850/s1850_fixups.c20
2 files changed, 29 insertions, 22 deletions
diff --git a/src/mainboard/dell/s1850/auto.c b/src/mainboard/dell/s1850/auto.c
index f1d2c65592..4f61a45500 100644
--- a/src/mainboard/dell/s1850/auto.c
+++ b/src/mainboard/dell/s1850/auto.c
@@ -65,25 +65,6 @@ static inline void activate_spd_rom(const struct mem_controller *ctrl)
}
static inline int spd_read_byte(unsigned device, unsigned address)
{
- /* fake it out for this board */
- switch(device) {
- case 0x52:
- case 0x53:
- print_debug("FAKE");
- device = 0x50;
- break;
- case 0x50:
- case 0x51:
- case 0x54:
- case 0x55:
- case 0x56:
- case 0x57:
- print_debug("57");
- device = 0x57;
- break;
- default:
- die("BAD DEV IN spd_read_byte");
- }
return smbus_read_byte(device, address);
}
@@ -278,12 +259,17 @@ static void main(unsigned long bist)
w = inw(0x866);
outw(w|2, 0x866);
+#if 0
+ /*seriaice shows
+ dell does this so leave it here so I don't forget
+ */
/* SMBUS */
pci_write_config16(PCI_DEV(0, 0x1f, 3), 0x20, 0x08c0);
/* unknown */
b = inb(0x8c2);
outb(0xdf, 0x8c2);
+#endif
/* another device enable? */
b = pci_read_config8(PCI_DEV(0, 0, 0), 0xf4);
@@ -314,11 +300,12 @@ static void main(unsigned long bist)
uart_init();
console_init();
+
/* stuff we seem to need */
- pc8374_enable_dev(PC8374_KBCK, 0);
+ pc8374_enable_dev(PNP_DEV(0x2e, PC8374_KBCK), 0);
/* GPIOs */
- pc8374_enable_dev(PC8374_GPIO, 0xc20);
+ pc8374_enable_dev(PNP_DEV(0x2e, PC8374_GPIO), 0xc20);
/* keep this in mind.
SerialICE-hlp: outb 002e <= 23
@@ -351,7 +338,7 @@ static void main(unsigned long bist)
#if 1
enable_smbus();
#endif
-#if 0
+#if 1
// dump_spd_registers(&cpu[0]);
int i;
for(i = 0; i < 1; i++) {
diff --git a/src/mainboard/dell/s1850/s1850_fixups.c b/src/mainboard/dell/s1850/s1850_fixups.c
index 77744d4d34..9827120056 100644
--- a/src/mainboard/dell/s1850/s1850_fixups.c
+++ b/src/mainboard/dell/s1850/s1850_fixups.c
@@ -33,6 +33,26 @@ static void mainboard_set_ich5(void)
* we leave it enabled and visible in config space -- 8f66
*/
pci_write_config16(PCI_DEV(0, 0x1f, 0), 0xf2, 0x8f66);
+ /* GPIOs -- needed, possibly, for SPD */
+ pci_write_config32(PCI_DEV(0, 0x1f, 0), 0x58, 0x881);
+ pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x5c, 0x10);
+
+ /* now the fun begins ... enable the GPIOs as done on factory */
+ /* factory config from IO ports
+ * It has a few more things enabled than default!
+ */
+ outl(0x1ae0f183, 0x880);
+ outl(0x1b00ffff, 0x884);
+ outl(0x131f0000, 0x88c);
+ outl(0x00000000, 0x894);
+ outl(0x00040000, 0x898);
+ outl(0x00000000, 0x8a4);
+ outl(0x00000000, 0x8a8);
+ outl(0x000031c0, 0x8ac);
+ outl(0x00000007, 0x8b0);
+ outl(0x00000304, 0x8b4);
+ outl(0x00030303, 0x8b8);
+
}