summaryrefslogtreecommitdiff
path: root/src/mainboard/digitallogic/msm800sev/Config.lb
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/digitallogic/msm800sev/Config.lb')
-rw-r--r--src/mainboard/digitallogic/msm800sev/Config.lb170
1 files changed, 0 insertions, 170 deletions
diff --git a/src/mainboard/digitallogic/msm800sev/Config.lb b/src/mainboard/digitallogic/msm800sev/Config.lb
deleted file mode 100644
index 5965cc1d0a..0000000000
--- a/src/mainboard/digitallogic/msm800sev/Config.lb
+++ /dev/null
@@ -1,170 +0,0 @@
-## CONFIG_XIP_ROM_SIZE must be a power of 2.
-default CONFIG_XIP_ROM_SIZE = 64 * 1024
-include /config/nofailovercalculation.lb
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if CONFIG_GENERATE_PIRQ_TABLE
- object irq_tables.o
-end
-
- #compile cache_as_ram.c to auto.inc
- makerule ./cache_as_ram_auto.inc
- depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
- action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
- action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
- end
-
-##
-## Build our 16 bit and 32 bit coreboot entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where coreboot is entered)
-##
-if CONFIG_USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of coreboot startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if CONFIG_USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-# mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu_enable.inc
-
- mainboardinit cpu/amd/model_lx/cache_as_ram.inc
- mainboardinit ./cache_as_ram_auto.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/amd/lx
- device pci_domain 0 on
- device pci 1.0 on end
- device pci 1.1 on end
- chip southbridge/amd/cs5536
- # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
- # SIRQ Mode = Active(Quiet) mode. Save power....
- # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK
- # How to get these? Boot linux and do this:
- # rdmsr 0x51400025
- register "lpc_serirq_enable" = "0x0000105a"
- # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits
- register "lpc_serirq_polarity" = "0x0000EFA5"
- # mode is high 10 bits (determined from code)
- register "lpc_serirq_mode" = "1"
- # Don't yet know how to find this.
- register "enable_gpio_int_route" = "0x0D0C0700"
- register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
- register "enable_USBP4_device" = "0" #0: host, 1:device
- register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
- register "com1_enable" = "0"
- register "com1_address" = "0x3F8"
- register "com1_irq" = "4"
- register "com2_enable" = "0"
- register "com2_address" = "0x2F8"
- register "com2_irq" = "3"
- register "unwanted_vpci[0]" = "0" # End of list has a zero
- device pci f.0 on # ISA Bridge
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci f.1 on end # Flash controller
- device pci f.2 on end # IDE controller
- device pci f.3 on end # Audio
- device pci f.4 on end # OHCI
- device pci f.5 on end # EHCI
- end
- end
-
- # APIC cluster is late CPU init.
- device apic_cluster 0 on
- chip cpu/amd/model_lx
- device apic 0 on end
- end
- end
-
-end
-