summaryrefslogtreecommitdiff
path: root/src/mainboard/digitallogic/msm800sev/devicetree.cb
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/digitallogic/msm800sev/devicetree.cb')
-rw-r--r--src/mainboard/digitallogic/msm800sev/devicetree.cb85
1 files changed, 0 insertions, 85 deletions
diff --git a/src/mainboard/digitallogic/msm800sev/devicetree.cb b/src/mainboard/digitallogic/msm800sev/devicetree.cb
deleted file mode 100644
index b03d4c532c..0000000000
--- a/src/mainboard/digitallogic/msm800sev/devicetree.cb
+++ /dev/null
@@ -1,85 +0,0 @@
-chip northbridge/amd/lx
- device domain 0 on
- device pci 1.0 on end
- device pci 1.1 on end
- chip southbridge/amd/cs5536
- # IRQ 12 and 1 unmasked, Keyboard and Mouse IRQs. OK
- # SIRQ Mode = Active(Quiet) mode. Save power....
- # Invert mask = IRQ 12 and 1 are active high. Keyboard and Mouse IRQs. OK
- # How to get these? Boot linux and do this:
- # rdmsr 0x51400025
- register "lpc_serirq_enable" = "0x0000105a"
- # rdmsr 0x5140004e -- polairy is high 16 bits of low 32 bits
- register "lpc_serirq_polarity" = "0x0000EFA5"
- # mode is high 10 bits (determined from code)
- register "lpc_serirq_mode" = "1"
- # Don't yet know how to find this.
- register "enable_gpio_int_route" = "0x0D0C0700"
- register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash
- register "enable_USBP4_device" = "0" #0: host, 1:device
- register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
- register "com1_enable" = "0"
- register "com1_address" = "0x3F8"
- register "com1_irq" = "4"
- register "com2_enable" = "0"
- register "com2_address" = "0x2F8"
- register "com2_irq" = "3"
- register "unwanted_vpci[0]" = "0" # End of list has a zero
- device pci f.0 on # ISA Bridge
- chip superio/winbond/w83627hf
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.1 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.2 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.5 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- irq 0x72 = 12
- end
- device pnp 2e.6 off # CIR
- io 0x60 = 0x100
- end
- device pnp 2e.7 off # GAME_MIDI_GIPO1
- io 0x60 = 0x220
- io 0x62 = 0x300
- irq 0x70 = 9
- end
- device pnp 2e.8 off end # GPIO2
- device pnp 2e.9 off end # GPIO3
- device pnp 2e.a off end # ACPI
- device pnp 2e.b on # HW Monitor
- io 0x60 = 0x290
- irq 0x70 = 5
- end
- end
- end
- device pci f.1 on end # Flash controller
- device pci f.2 on end # IDE controller
- device pci f.3 on end # Audio
- device pci f.4 on end # OHCI
- device pci f.5 on end # EHCI
- end
- end
-
- # APIC cluster is late CPU init.
- device cpu_cluster 0 on
- chip cpu/amd/geode_lx
- device lapic 0 on end
- end
- end
-
-end