1 files changed, 57 insertions, 57 deletions

diff --git a/src/mainboard/embeddedplanet/ep405pc/Options.lb b/src/mainboard/embeddedplanet/ep405pc/Options.lb
index 7aabc4f252..c61cc6d2c4 100644
--- a/src/mainboard/embeddedplanet/ep405pc/Options.lb
+++ b/src/mainboard/embeddedplanet/ep405pc/Options.lb
@@ -2,25 +2,25 @@
 ## Config file for the Embedded Planet EP405PC Computing Engine
 ##
 
-uses PCIC0_CFGADDR 
+uses CONFIG_PCIC0_CFGADDR 
 uses CONFIG_CBFS
 uses CONFIG_ARCH_X86
-uses PCIC0_CFGDATA 
-uses ISA_IO_BASE 
-uses ISA_MEM_BASE 
-uses TTYS0_BASE 
-uses _IO_BASE 
-
-uses CPU_OPT
-uses CROSS_COMPILE 
-uses HAVE_OPTION_TABLE
+uses CONFIG_PCIC0_CFGDATA 
+uses CONFIG_ISA_IO_BASE 
+uses CONFIG_ISA_MEM_BASE 
+uses CONFIG_TTYS0_BASE 
+uses CONFIG_IO_BASE 
+
+uses CONFIG_CPU_OPT
+uses CONFIG_CROSS_COMPILE 
+uses CONFIG_HAVE_OPTION_TABLE
 uses CONFIG_COMPRESS 
 uses CONFIG_CHIP_CONFIGURE
-uses DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
 uses CONFIG_USE_INIT
 uses CONFIG_CONSOLE_SERIAL8250 
-uses TTYS0_BAUD TTYS0_DIV
-uses NO_POST
+uses CONFIG_TTYS0_BAUD CONFIG_TTYS0_DIV
+uses CONFIG_NO_POST
 uses CONFIG_IDE
 uses CONFIG_FS_PAYLOAD
 uses CONFIG_FS_EXT2
@@ -28,54 +28,54 @@ uses CONFIG_FS_ISO9660
 uses CONFIG_FS_FAT
 uses CONFIG_COMPRESSED_PAYLOAD_LZMA
 uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses AUTOBOOT_CMDLINE
+uses CONFIG_AUTOBOOT_CMDLINE
 uses CONFIG_SYS_CLK_FREQ
-uses IDE_BOOT_DRIVE
-#uses IDE_SWAB
-uses IDE_OFFSET 
-uses ROM_SIZE
-uses ROM_IMAGE_SIZE
-uses _RESET
-uses _EXCEPTION_VECTORS
-uses _ROMBASE
-uses _ROMSTART
-uses _RAMBASE
-#uses _RAMSTART
-uses EMBEDDED_RAM_SIZE
-uses STACK_SIZE HEAP_SIZE
-
-uses MAINBOARD
-uses MAINBOARD_VENDOR
-uses MAINBOARD_PART_NUMBER
+uses CONFIG_IDE_BOOT_DRIVE
+#uses CONFIG_IDE_SWAB
+uses CONFIG_IDE_OFFSET 
+uses CONFIG_ROM_SIZE
+uses CONFIG_ROM_IMAGE_SIZE
+uses CONFIG_RESET
+uses CONFIG_EXCEPTION_VECTORS
+uses CONFIG_ROMBASE
+uses CONFIG_ROMSTART
+uses CONFIG_RAMBASE
+#uses CONFIG_RAMSTART
+uses CONFIG_EMBEDDED_RAM_SIZE
+uses CONFIG_STACK_SIZE CONFIG_HEAP_SIZE
+
+uses CONFIG_MAINBOARD
+uses CONFIG_MAINBOARD_VENDOR
+uses CONFIG_MAINBOARD_PART_NUMBER
 uses COREBOOT_EXTRA_VERSION
-uses CROSS_COMPILE
+uses CONFIG_CROSS_COMPILE
 uses CC
-uses HOSTCC
-uses OBJCOPY
+uses CONFIG_HOSTCC
+uses CONFIG_OBJCOPY
 
 ##
 ## Set PCI configuration register addresses
 ##
-default PCIC0_CFGADDR=0xeec00000
-default PCIC0_CFGDATA=0xeec00004
+default CONFIG_PCIC0_CFGADDR=0xeec00000
+default CONFIG_PCIC0_CFGDATA=0xeec00004
 
 ##
 ## Set PCI/ISA I/O and memory base address
 ##
-default ISA_IO_BASE=0xe8000000
-default ISA_MEM_BASE=0x80000000
-default _IO_BASE=ISA_IO_BASE
+default CONFIG_ISA_IO_BASE=0xe8000000
+default CONFIG_ISA_MEM_BASE=0x80000000
+default CONFIG_IO_BASE=CONFIG_ISA_IO_BASE
 
 ##
 ## HACK ALERT: the UART0 registers are not in the PCI I/O address space
 ## but both IDE and UART use the same routines for I/O (inb/outb). To get 
 ## around this we set TTYSO_BASE to the difference between the two.
 ##
-default TTYS0_BASE=0xef600300-ISA_IO_BASE
+default CONFIG_TTYS0_BASE=0xef600300-CONFIG_ISA_IO_BASE
 
 ## Enable PPC405 instructions
-default CPU_OPT="-mcpu=405"
-#default CPU_OPT=""
+default CONFIG_CPU_OPT="-mcpu=405"
+#default CONFIG_CPU_OPT=""
 default CONFIG_ARCH_X86=0
 
 ## Use stage 1 initialization code
@@ -88,14 +88,14 @@ default CONFIG_CHIP_CONFIGURE=1
 default CONFIG_COMPRESS=0
 
 ## Turn off POST codes
-default NO_POST=1
+default CONFIG_NO_POST=1
 
 ## Enable serial console
-default DEFAULT_CONSOLE_LOGLEVEL=8
+default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
 default CONFIG_CONSOLE_SERIAL8250=1
 # Divisor of 69 == 9600 baud due to weird clocking
-default TTYS0_DIV=69
-default TTYS0_BAUD=9600
+default CONFIG_TTYS0_DIV=69
+default CONFIG_TTYS0_BAUD=9600
 
 ## Boot linux from IDE
 default CONFIG_IDE=1
@@ -103,25 +103,25 @@ default CONFIG_FS_PAYLOAD=1
 default CONFIG_FS_EXT2=1
 default CONFIG_FS_ISO9660=1
 default CONFIG_FS_FAT=1
-default AUTOBOOT_CMDLINE="hda1:/vmlinuz"
+default CONFIG_AUTOBOOT_CMDLINE="hda1:/vmlinuz"
 
-default ROM_SIZE=1048576
+default CONFIG_ROM_SIZE=1048576
 
 ## Board has fixed size RAM
-default EMBEDDED_RAM_SIZE=64*1024*1024
+default CONFIG_EMBEDDED_RAM_SIZE=64*1024*1024
 
 ## Coreboot C code runs at this location in RAM
-default _RAMBASE=0x00100000
+default CONFIG_RAMBASE=0x00100000
 
 ##
 ## Use a 64K stack
 ##
-default STACK_SIZE=0x10000
+default CONFIG_STACK_SIZE=0x10000
 
 ##
 ## Use a 64K heap
 ##
-default HEAP_SIZE=0x10000
+default CONFIG_HEAP_SIZE=0x10000
 
 ##
 ## System clock
@@ -129,19 +129,19 @@ default HEAP_SIZE=0x10000
 default CONFIG_SYS_CLK_FREQ=33
 
 ##
-default _ROMBASE=0xfff00000
+default CONFIG_ROMBASE=0xfff00000
 
 ## Reset vector address
-default _RESET=0xfffffffc
+default CONFIG_RESET=0xfffffffc
 
 ## Exception vectors
-default _EXCEPTION_VECTORS=_ROMBASE+0x100
+default CONFIG_EXCEPTION_VECTORS=CONFIG_ROMBASE+0x100
 
 ## coreboot ROM start address
-default _ROMSTART=0xfff03000
+default CONFIG_ROMSTART=0xfff03000
 
 ## coreboot C code runs at this location in RAM
-default _RAMBASE=0x00100000
+default CONFIG_RAMBASE=0x00100000
 
 ### End Options.lb
 #