summaryrefslogtreecommitdiff
path: root/src/mainboard/google/cyan
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/google/cyan')
-rw-r--r--src/mainboard/google/cyan/Kconfig4
-rw-r--r--src/mainboard/google/cyan/devicetree.cb (renamed from src/mainboard/google/cyan/variants/terra/devicetree.cb)53
-rw-r--r--src/mainboard/google/cyan/variants/banon/devicetree.cb146
-rw-r--r--src/mainboard/google/cyan/variants/banon/overridetree.cb26
-rw-r--r--src/mainboard/google/cyan/variants/celes/devicetree.cb140
-rw-r--r--src/mainboard/google/cyan/variants/celes/overridetree.cb8
-rw-r--r--src/mainboard/google/cyan/variants/cyan/devicetree.cb139
-rw-r--r--src/mainboard/google/cyan/variants/cyan/overridetree.cb18
-rw-r--r--src/mainboard/google/cyan/variants/edgar/devicetree.cb140
-rw-r--r--src/mainboard/google/cyan/variants/edgar/overridetree.cb32
-rw-r--r--src/mainboard/google/cyan/variants/kefka/devicetree.cb146
-rw-r--r--src/mainboard/google/cyan/variants/kefka/overridetree.cb8
-rw-r--r--src/mainboard/google/cyan/variants/reks/devicetree.cb137
-rw-r--r--src/mainboard/google/cyan/variants/reks/overridetree.cb29
-rw-r--r--src/mainboard/google/cyan/variants/relm/devicetree.cb146
-rw-r--r--src/mainboard/google/cyan/variants/relm/overridetree.cb8
-rw-r--r--src/mainboard/google/cyan/variants/setzer/devicetree.cb146
-rw-r--r--src/mainboard/google/cyan/variants/setzer/overridetree.cb10
-rw-r--r--src/mainboard/google/cyan/variants/terra/overridetree.cb5
-rw-r--r--src/mainboard/google/cyan/variants/ultima/devicetree.cb140
-rw-r--r--src/mainboard/google/cyan/variants/ultima/overridetree.cb11
-rw-r--r--src/mainboard/google/cyan/variants/wizpig/devicetree.cb147
-rw-r--r--src/mainboard/google/cyan/variants/wizpig/overridetree.cb32
23 files changed, 216 insertions, 1455 deletions
diff --git a/src/mainboard/google/cyan/Kconfig b/src/mainboard/google/cyan/Kconfig
index 45610542e4..92bafee514 100644
--- a/src/mainboard/google/cyan/Kconfig
+++ b/src/mainboard/google/cyan/Kconfig
@@ -68,9 +68,9 @@ config MAINBOARD_PART_NUMBER
default "Ultima" if BOARD_GOOGLE_ULTIMA
default "Wizpig" if BOARD_GOOGLE_WIZPIG
-config DEVICETREE
+config OVERRIDE_DEVICETREE
string
- default "variants/$(CONFIG_VARIANT_DIR)/devicetree.cb"
+ default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb"
config CBFS_SIZE
hex
diff --git a/src/mainboard/google/cyan/variants/terra/devicetree.cb b/src/mainboard/google/cyan/devicetree.cb
index d7d0f1f7e8..328a60817e 100644
--- a/src/mainboard/google/cyan/variants/terra/devicetree.cb
+++ b/src/mainboard/google/cyan/devicetree.cb
@@ -27,12 +27,12 @@ chip soc/intel/braswell
register "PcdEnableLpe" = "1"
register "PcdEnableDma0" = "1"
register "PcdEnableDma1" = "1"
- register "PcdEnableI2C0" = "0"
- register "PcdEnableI2C1" = "1"
+ register "PcdEnableI2C0" = "0" # Touchscreen
+ register "PcdEnableI2C1" = "1" # PMIC (or Maxim Audio)
register "PcdEnableI2C2" = "0"
register "PcdEnableI2C3" = "0"
- register "PcdEnableI2C4" = "1"
- register "PcdEnableI2C5" = "1"
+ register "PcdEnableI2C4" = "1" # Realtek Audio
+ register "PcdEnableI2C5" = "1" # Touchpad
register "PcdEnableI2C6" = "0"
register "PunitPwrConfigDisable" = "0" # Enable SVID
register "ChvSvidConfig" = "SVID_PMIC_CONFIG"
@@ -67,13 +67,14 @@ chip soc/intel/braswell
register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a"
register "PcdSataInterfaceSpeed" = "3"
register "PcdPchSsicEnable" = "1"
- register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM
+ register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM
register "PMIC_I2CBus" = "1"
register "ISPEnable" = "0" # Disable IUNIT
register "ISPPciDevConfig" = "3"
register "PcdSdDetectChk" = "0" # Disable SD card detect
+
register "I2C0Frequency" = "1"
- register "I2C1Frequency" = "2" # Set the PMIC clock speed to 1Mhz
+ register "I2C1Frequency" = "2" # Set the PMIC clock speed to 1Mhz
register "I2C2Frequency" = "1"
register "I2C3Frequency" = "1"
register "I2C4Frequency" = "1"
@@ -100,37 +101,37 @@ chip soc/intel/braswell
end
device domain 0 on
# EDS Table 24-4, Figure 24-5
- device pci 00.0 on end # 8086 2280 - SoC transaction router
- device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display
+ device pci 00.0 on end # 8086 2280 - SoC transaction router
+ device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display
device pci 03.0 off end # 8086 22b8 - Camera and Image Processor
- device pci 0b.0 on end # 8086 22dc - ?
- device pci 10.0 on end # 8086 2294 - MMC Port
+ device pci 0b.0 on end # 8086 22dc - Signal Processing Controller
+ device pci 10.0 on end # 8086 2294 - MMC Port
device pci 11.0 off end # 8086 0F15 - SDIO Port
- device pci 12.0 on end # 8086 0F16 - SD Port
+ device pci 12.0 on end # 8086 0F16 - SD Port
device pci 13.0 off end # 8086 22a3 - Sata controller
- device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time
- device pci 15.0 on end # 8086 22a8 - LP Engine Audio
+ device pci 14.0 on end # 8086 22b5 - USB XHCI
+ device pci 15.0 on end # 8086 22a8 - LP Engine Audio
device pci 16.0 off end # 8086 22b7 - USB device
- device pci 18.0 on end # 8086 22c0 - SIO - DMA
- device pci 18.1 off end # 8086 22c1 - I2C Port 1
- device pci 18.2 on end # 8086 22c2 - I2C Port 2
+ device pci 18.0 on end # 8086 22c0 - SIO - DMA
+ device pci 18.1 off end # 8086 22c1 - I2C Port 1: Touchscreen
+ device pci 18.2 on end # 8086 22c2 - I2C Port 2: PMIC
device pci 18.3 off end # 8086 22c3 - I2C Port 3
device pci 18.4 off end # 8086 22c4 - I2C Port 4
- device pci 18.5 on end # 8086 22c5 - I2C Port 5
- device pci 18.6 on end # 8086 22c6 - I2C Port 6
+ device pci 18.5 on end # 8086 22c5 - I2C Port 5: Realtek Audio
+ device pci 18.6 on end # 8086 22c6 - I2C Port 6: Touchpad
device pci 18.7 off end # 8086 22c7 - I2C Port 7
device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine
- device pci 1b.0 on end # 8086 0F04 - HD Audio
- device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1
- device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2
- device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3
- device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4
- device pci 1e.0 on end # 8086 2286 - SIO - DMA
+ device pci 1b.0 on end # 8086 2284 - HD Audio
+ device pci 1c.0 on end # 8086 22c8 - PCIe Root Port 1
+ device pci 1c.1 off end # 8086 22ca - PCIe Root Port 2
+ device pci 1c.2 on end # 8086 22cc - PCIe Root Port 3: WiFi
+ device pci 1c.3 off end # 8086 22ce - PCIe Root Port 4
+ device pci 1e.0 on end # 8086 2286 - SIO - DMA
device pci 1e.1 off end # 8086 0F08 - PWM 1
device pci 1e.2 off end # 8086 0F09 - PWM 2
- device pci 1e.3 on end # 8086 228a - HSUART 1
+ device pci 1e.3 on end # 8086 228a - HSUART 1
device pci 1e.4 off end # 8086 228c - HSUART 2
- device pci 1e.5 on end # 8086 228e - SPI 1
+ device pci 1e.5 on end # 8086 228e - SPI 1
device pci 1e.6 off end # 8086 2290 - SPI 2
device pci 1e.7 off end # 8086 22ac - SPI 3
device pci 1f.0 on # 8086 229c - LPC bridge
diff --git a/src/mainboard/google/cyan/variants/banon/devicetree.cb b/src/mainboard/google/cyan/variants/banon/devicetree.cb
deleted file mode 100644
index 60076c2171..0000000000
--- a/src/mainboard/google/cyan/variants/banon/devicetree.cb
+++ /dev/null
@@ -1,146 +0,0 @@
-chip soc/intel/braswell
-
- ############################################################
- # Set the parameters for MemoryInit
- ############################################################
-
- register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB
-
- register "PcdMrcInitMmioSize" = "0x0800"
- register "PcdMrcInitSpdAddr1" = "0xa0"
- register "PcdMrcInitSpdAddr2" = "0xa2"
- register "PcdIgdDvmt50PreAlloc" = "1"
- register "PcdApertureSize" = "2"
- register "PcdGttSize" = "1"
- register "PcdDvfsEnable" = "1"
- register "PcdCaMirrorEn" = "1"
-
- ############################################################
- # Set the parameters for SiliconInit
- ############################################################
-
- register "PcdSdcardMode" = "PCH_ACPI_MODE"
- register "PcdEnableHsuart0" = "0"
- register "PcdEnableHsuart1" = "1"
- register "PcdEnableAzalia" = "1"
- register "PcdEnableXhci" = "1"
- register "PcdEnableLpe" = "1"
- register "PcdEnableDma0" = "1"
- register "PcdEnableDma1" = "1"
- register "PcdEnableI2C0" = "0"
- register "PcdEnableI2C1" = "1"
- register "PcdEnableI2C2" = "0"
- register "PcdEnableI2C3" = "0"
- register "PcdEnableI2C4" = "1"
- register "PcdEnableI2C5" = "1"
- register "PcdEnableI2C6" = "0"
- register "PunitPwrConfigDisable" = "0" # Enable SVID
- register "ChvSvidConfig" = "SVID_PMIC_CONFIG"
- register "PcdEmmcMode" = "PCH_ACPI_MODE"
- register "PcdUsb3ClkSsc" = "1"
- register "PcdDispClkSsc" = "1"
- register "PcdSataClkSsc" = "1"
- register "PcdEnableSata" = "0" # Disable SATA
- register "Usb2Port0PerPortPeTxiSet" = "7"
- register "Usb2Port0PerPortTxiSet" = "6"
- register "Usb2Port0IUsbTxEmphasisEn" = "3"
- register "Usb2Port0PerPortTxPeHalf" = "1"
- register "Usb2Port1PerPortPeTxiSet" = "7"
- register "Usb2Port1PerPortTxiSet" = "6"
- register "Usb2Port1IUsbTxEmphasisEn" = "3"
- register "Usb2Port1PerPortTxPeHalf" = "1"
- register "Usb2Port2PerPortPeTxiSet" = "7"
- register "Usb2Port2PerPortTxiSet" = "6"
- register "Usb2Port2IUsbTxEmphasisEn" = "3"
- register "Usb2Port2PerPortTxPeHalf" = "1"
- register "Usb2Port3PerPortPeTxiSet" = "7"
- register "Usb2Port3PerPortTxiSet" = "6"
- register "Usb2Port3IUsbTxEmphasisEn" = "3"
- register "Usb2Port3PerPortTxPeHalf" = "1"
- register "Usb2Port4PerPortPeTxiSet" = "7"
- register "Usb2Port4PerPortTxiSet" = "6"
- register "Usb2Port4IUsbTxEmphasisEn" = "3"
- register "Usb2Port4PerPortTxPeHalf" = "1"
- register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a"
- register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a"
- register "PcdSataInterfaceSpeed" = "3"
- register "PcdPchSsicEnable" = "1"
- register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM
- register "PMIC_I2CBus" = "1"
- register "ISPEnable" = "0" # Disable IUNIT
- register "ISPPciDevConfig" = "3"
- register "PcdSdDetectChk" = "0" # Disable SD card detect
- register "I2C0Frequency" = "1"
- register "I2C1Frequency" = "2" # Set the PMIC clock speed to 1Mhz
- register "I2C2Frequency" = "1"
- register "I2C3Frequency" = "1"
- register "I2C4Frequency" = "1"
- register "I2C5Frequency" = "1"
- register "I2C6Frequency" = "1"
-
- # LPE audio codec settings
- register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock
-
- # Enable devices in ACPI mode
- register "lpss_acpi_mode" = "1"
- register "emmc_acpi_mode" = "1"
- register "sd_acpi_mode" = "1"
- register "lpe_acpi_mode" = "1"
-
- # Disable SLP_X stretching after SUS power well fail.
- register "disable_slp_x_stretch_sus_fail" = "1"
-
- # Allow PCIe devices to wake system from suspend
- register "pcie_wake_enable" = "1"
-
- device cpu_cluster 0 on
- device lapic 0 on end
- end
- device domain 0 on
- # EDS Table 24-4, Figure 24-5
- device pci 00.0 on end # 8086 2280 - SoC transaction router
- device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display
- device pci 03.0 off end # 8086 22b8 - Camera and Image Processor
- device pci 0b.0 on end # 8086 22dc - ?
- device pci 10.0 on end # 8086 2294 - MMC Port
- device pci 11.0 off end # 8086 0F15 - SDIO Port
- device pci 12.0 on end # 8086 0F16 - SD Port
- device pci 13.0 off end # 8086 22a3 - Sata controller
- device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time
- device pci 15.0 on end # 8086 22a8 - LP Engine Audio
- device pci 16.0 off end # 8086 22b7 - USB device
- device pci 18.0 on end # 8086 22c0 - SIO - DMA
- device pci 18.1 off end # 8086 22c1 - I2C Port 1
- device pci 18.2 on end # 8086 22c2 - I2C Port 2
- device pci 18.3 off end # 8086 22c3 - I2C Port 3
- device pci 18.4 off end # 8086 22c4 - I2C Port 4
- device pci 18.5 on end # 8086 22c5 - I2C Port 5
- device pci 18.6 on end # 8086 22c6 - I2C Port 6
- device pci 18.7 off end # 8086 22c7 - I2C Port 7
- device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine
- device pci 1b.0 on end # 8086 0F04 - HD Audio
- device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1
- device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2
- device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3
- device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4
- device pci 1e.0 on end # 8086 2286 - SIO - DMA
- device pci 1e.1 off end # 8086 0F08 - PWM 1
- device pci 1e.2 off end # 8086 0F09 - PWM 2
- device pci 1e.3 on end # 8086 228a - HSUART 1
- device pci 1e.4 off end # 8086 228c - HSUART 2
- device pci 1e.5 on end # 8086 228e - SPI 1
- device pci 1e.6 off end # 8086 2290 - SPI 2
- device pci 1e.7 off end # 8086 22ac - SPI 3
- device pci 1f.0 on # 8086 229c - LPC bridge
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- device pnp 0c09.0 on end
- end
- end # LPC Bridge
- device pci 1f.3 off end # 8086 0F12 - SMBus 0
- end
-end
diff --git a/src/mainboard/google/cyan/variants/banon/overridetree.cb b/src/mainboard/google/cyan/variants/banon/overridetree.cb
new file mode 100644
index 0000000000..32f0dc6a5f
--- /dev/null
+++ b/src/mainboard/google/cyan/variants/banon/overridetree.cb
@@ -0,0 +1,26 @@
+chip soc/intel/braswell
+
+ register "Usb2Port0PerPortPeTxiSet" = "7"
+ register "Usb2Port0PerPortTxiSet" = "6"
+ register "Usb2Port0IUsbTxEmphasisEn" = "3"
+ register "Usb2Port0PerPortTxPeHalf" = "1"
+ register "Usb2Port1PerPortPeTxiSet" = "7"
+ register "Usb2Port1PerPortTxiSet" = "6"
+ register "Usb2Port1IUsbTxEmphasisEn" = "3"
+ register "Usb2Port1PerPortTxPeHalf" = "1"
+ register "Usb2Port2PerPortPeTxiSet" = "7"
+ register "Usb2Port2PerPortTxiSet" = "6"
+ register "Usb2Port2IUsbTxEmphasisEn" = "3"
+ register "Usb2Port2PerPortTxPeHalf" = "1"
+ register "Usb2Port3PerPortPeTxiSet" = "7"
+ register "Usb2Port3PerPortTxiSet" = "6"
+ register "Usb2Port3IUsbTxEmphasisEn" = "3"
+ register "Usb2Port3PerPortTxPeHalf" = "1"
+ register "Usb2Port4PerPortPeTxiSet" = "7"
+ register "Usb2Port4PerPortTxiSet" = "6"
+ register "Usb2Port4IUsbTxEmphasisEn" = "3"
+ register "Usb2Port4PerPortTxPeHalf" = "1"
+
+ device domain 0 on end
+
+end
diff --git a/src/mainboard/google/cyan/variants/celes/devicetree.cb b/src/mainboard/google/cyan/variants/celes/devicetree.cb
deleted file mode 100644
index a1ab510810..0000000000
--- a/src/mainboard/google/cyan/variants/celes/devicetree.cb
+++ /dev/null
@@ -1,140 +0,0 @@
-chip soc/intel/braswell
-
- ############################################################
- # Set the parameters for MemoryInit
- ############################################################
-
- register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB
-
- register "PcdMrcInitMmioSize" = "0x0800"
- register "PcdMrcInitSpdAddr1" = "0xa0"
- register "PcdMrcInitSpdAddr2" = "0xa2"
- register "PcdIgdDvmt50PreAlloc" = "1"
- register "PcdApertureSize" = "2"
- register "PcdGttSize" = "1"
- register "PcdDvfsEnable" = "1"
- register "PcdCaMirrorEn" = "1"
-
- ############################################################
- # Set the parameters for SiliconInit
- ############################################################
-
- register "PcdSdcardMode" = "PCH_ACPI_MODE"
- register "PcdEnableHsuart0" = "0"
- register "PcdEnableHsuart1" = "1"
- register "PcdEnableAzalia" = "1"
- register "PcdEnableXhci" = "1"
- register "PcdEnableLpe" = "1"
- register "PcdEnableDma0" = "1"
- register "PcdEnableDma1" = "1"
- register "PcdEnableI2C0" = "0"
- register "PcdEnableI2C1" = "1"
- register "PcdEnableI2C2" = "0"
- register "PcdEnableI2C3" = "0"
- register "PcdEnableI2C4" = "1"
- register "PcdEnableI2C5" = "1"
- register "PcdEnableI2C6" = "0"
- register "PunitPwrConfigDisable" = "0" # Enable SVID
- register "ChvSvidConfig" = "SVID_PMIC_CONFIG"
- register "PcdEmmcMode" = "PCH_ACPI_MODE"
- register "PcdUsb3ClkSsc" = "1"
- register "PcdDispClkSsc" = "1"
- register "PcdSataClkSsc" = "1"
- register "PcdEnableSata" = "0" # Disable SATA
- register "Usb2Port0PerPortPeTxiSet" = "7"
- register "Usb2Port0PerPortTxiSet" = "5"
- register "Usb2Port0IUsbTxEmphasisEn" = "2"
- register "Usb2Port0PerPortTxPeHalf" = "1"
- register "Usb2Port1PerPortPeTxiSet" = "7"
- register "Usb2Port1PerPortTxiSet" = "3"
- register "Usb2Port1IUsbTxEmphasisEn" = "2"
- register "Usb2Port1PerPortTxPeHalf" = "1"
- register "Usb2Port2PerPortPeTxiSet" = "7"
- register "Usb2Port2PerPortTxiSet" = "3"
- register "Usb2Port2IUsbTxEmphasisEn" = "2"
- register "Usb2Port2PerPortTxPeHalf" = "1"
- register "Usb2Port3PerPortPeTxiSet" = "7"
- register "Usb2Port3PerPortTxiSet" = "3"
- register "Usb2Port3IUsbTxEmphasisEn" = "2"
- register "Usb2Port3PerPortTxPeHalf" = "1"
- register "Usb2Port4PerPortPeTxiSet" = "7"
- register "Usb2Port4PerPortTxiSet" = "3"
- register "Usb2Port4IUsbTxEmphasisEn" = "2"
- register "Usb2Port4PerPortTxPeHalf" = "1"
- register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a"
- register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a"
- register "PcdSataInterfaceSpeed" = "3"
- register "PcdPchSsicEnable" = "0"
- register "PcdPchUsbHsicPort" = "0"
- register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM
- register "PMIC_I2CBus" = "1"
- register "ISPEnable" = "0" # Disable IUNIT
- register "ISPPciDevConfig" = "3"
- register "PcdSdDetectChk" = "0" # Disable SD card detect
-
- # LPE audio codec settings
- register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock
-
- # Enable devices in ACPI mode
- register "lpss_acpi_mode" = "1"
- register "emmc_acpi_mode" = "1"
- register "sd_acpi_mode" = "1"
- register "lpe_acpi_mode" = "1"
-
- # Disable SLP_X stretching after SUS power well fail.
- register "disable_slp_x_stretch_sus_fail" = "1"
-
- # Allow PCIe devices to wake system from suspend
- register "pcie_wake_enable" = "1"
-
- device cpu_cluster 0 on
- device lapic 0 on end
- end
- device domain 0 on
- # EDS Table 24-4, Figure 24-5
- device pci 00.0 on end # 8086 2280 - SoC transaction router
- device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display
- device pci 03.0 off end # 8086 22b8 - Camera and Image Processor
- device pci 0b.0 on end # 8086 22dc - ?
- device pci 10.0 on end # 8086 2294 - MMC Port
- device pci 11.0 off end # 8086 0F15 - SDIO Port
- device pci 12.0 on end # 8086 0F16 - SD Port
- device pci 13.0 off end # 8086 22a3 - Sata controller
- device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time
- device pci 15.0 on end # 8086 22a8 - LP Engine Audio
- device pci 16.0 off end # 8086 22b7 - USB device
- device pci 18.0 on end # 8086 22c0 - SIO - DMA
- device pci 18.1 off end # 8086 22c1 - I2C Port 1
- device pci 18.2 on end # 8086 22c2 - I2C Port 2
- device pci 18.3 off end # 8086 22c3 - I2C Port 3
- device pci 18.4 off end # 8086 22c4 - I2C Port 4
- device pci 18.5 on end # 8086 22c5 - I2C Port 5
- device pci 18.6 on end # 8086 22c6 - I2C Port 6
- device pci 18.7 off end # 8086 22c7 - I2C Port 7
- device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine
- device pci 1b.0 on end # 8086 0F04 - HD Audio
- device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1
- device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2
- device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3
- device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4
- device pci 1e.0 on end # 8086 2286 - SIO - DMA
- device pci 1e.1 off end # 8086 0F08 - PWM 1
- device pci 1e.2 off end # 8086 0F09 - PWM 2
- device pci 1e.3 on end # 8086 228a - HSUART 1
- device pci 1e.4 off end # 8086 228c - HSUART 2
- device pci 1e.5 on end # 8086 228e - SPI 1
- device pci 1e.6 off end # 8086 2290 - SPI 2
- device pci 1e.7 off end # 8086 22ac - SPI 3
- device pci 1f.0 on # 8086 229c - LPC bridge
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- device pnp 0c09.0 on end
- end
- end # LPC Bridge
- device pci 1f.3 off end # 8086 0F12 - SMBus 0
- end
-end
diff --git a/src/mainboard/google/cyan/variants/celes/overridetree.cb b/src/mainboard/google/cyan/variants/celes/overridetree.cb
new file mode 100644
index 0000000000..1eabd8e315
--- /dev/null
+++ b/src/mainboard/google/cyan/variants/celes/overridetree.cb
@@ -0,0 +1,8 @@
+chip soc/intel/braswell
+
+ register "PcdPchSsicEnable" = "0"
+ register "PcdPchUsbHsicPort" = "0"
+
+ device domain 0 on end
+
+end
diff --git a/src/mainboard/google/cyan/variants/cyan/devicetree.cb b/src/mainboard/google/cyan/variants/cyan/devicetree.cb
deleted file mode 100644
index dd9b05e5f7..0000000000
--- a/src/mainboard/google/cyan/variants/cyan/devicetree.cb
+++ /dev/null
@@ -1,139 +0,0 @@
-chip soc/intel/braswell
-
- ############################################################
- # Set the parameters for MemoryInit
- ############################################################
-
- register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB
-
- register "PcdMrcInitMmioSize" = "0x0800"
- register "PcdMrcInitSpdAddr1" = "0xa0"
- register "PcdMrcInitSpdAddr2" = "0xa2"
- register "PcdIgdDvmt50PreAlloc" = "1"
- register "PcdApertureSize" = "2"
- register "PcdGttSize" = "1"
- register "PcdDvfsEnable" = "1"
- register "PcdCaMirrorEn" = "0"
-
- ############################################################
- # Set the parameters for SiliconInit
- ############################################################
-
- register "PcdSdcardMode" = "PCH_ACPI_MODE"
- register "PcdEnableHsuart0" = "0"
- register "PcdEnableHsuart1" = "1"
- register "PcdEnableAzalia" = "1"
- register "PcdEnableXhci" = "1"
- register "PcdEnableLpe" = "1"
- register "PcdEnableDma0" = "1"
- register "PcdEnableDma1" = "1"
- register "PcdEnableI2C0" = "1"
- register "PcdEnableI2C1" = "1"
- register "PcdEnableI2C2" = "0"
- register "PcdEnableI2C3" = "0"
- register "PcdEnableI2C4" = "0"
- register "PcdEnableI2C5" = "1"
- register "PcdEnableI2C6" = "0"
- register "PunitPwrConfigDisable" = "0" # Enable SVID
- register "ChvSvidConfig" = "SVID_CONFIG1"
- register "PcdEmmcMode" = "PCH_ACPI_MODE"
- register "PcdUsb3ClkSsc" = "1"
- register "PcdDispClkSsc" = "1"
- register "PcdSataClkSsc" = "1"
- register "PcdEnableSata" = "0" # Disable SATA
- register "Usb2Port0PerPortPeTxiSet" = "7"
- register "Usb2Port0PerPortTxiSet" = "5"
- register "Usb2Port0IUsbTxEmphasisEn" = "2"
- register "Usb2Port0PerPortTxPeHalf" = "1"
- register "Usb2Port1PerPortPeTxiSet" = "7"
- register "Usb2Port1PerPortTxiSet" = "3"
- register "Usb2Port1IUsbTxEmphasisEn" = "2"
- register "Usb2Port1PerPortTxPeHalf" = "1"
- register "Usb2Port2PerPortPeTxiSet" = "7"
- register "Usb2Port2PerPortTxiSet" = "3"
- register "Usb2Port2IUsbTxEmphasisEn" = "2"
- register "Usb2Port2PerPortTxPeHalf" = "1"
- register "Usb2Port3PerPortPeTxiSet" = "7"
- register "Usb2Port3PerPortTxiSet" = "3"
- register "Usb2Port3IUsbTxEmphasisEn" = "2"
- register "Usb2Port3PerPortTxPeHalf" = "1"
- register "Usb2Port4PerPortPeTxiSet" = "7"
- register "Usb2Port4PerPortTxiSet" = "3"
- register "Usb2Port4IUsbTxEmphasisEn" = "2"
- register "Usb2Port4PerPortTxPeHalf" = "1"
- register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a"
- register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a"
- register "PcdSataInterfaceSpeed" = "3"
- register "PcdPchSsicEnable" = "1"
- register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM
- register "PMIC_I2CBus" = "0"
- register "ISPEnable" = "0" # Disable IUNIT
- register "ISPPciDevConfig" = "3"
- register "PcdSdDetectChk" = "0" # Disable SD card detect
-
- # LPE audio codec settings
- register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock
-
- # Enable devices in ACPI mode
- register "lpss_acpi_mode" = "1"
- register "emmc_acpi_mode" = "1"
- register "sd_acpi_mode" = "1"
- register "lpe_acpi_mode" = "1"
-
- # Disable SLP_X stretching after SUS power well fail.
- register "disable_slp_x_stretch_sus_fail" = "1"
-
- # Allow PCIe devices to wake system from suspend
- register "pcie_wake_enable" = "1"
-
- device cpu_cluster 0 on
- device lapic 0 on end
- end
- device domain 0 on
- # EDS Table 24-4, Figure 24-5
- device pci 00.0 on end # 8086 2280 - SoC transaction router
- device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display
- device pci 03.0 off end # 8086 22b8 - Camera and Image Processor
- device pci 0b.0 on end # 8086 22dc - ?
- device pci 10.0 on end # 8086 2294 - MMC Port
- device pci 11.0 off end # 8086 0F15 - SDIO Port
- device pci 12.0 on end # 8086 0F16 - SD Port
- device pci 13.0 off end # 8086 22a3 - Sata controller
- device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time
- device pci 15.0 on end # 8086 22a8 - LP Engine Audio
- device pci 16.0 off end # 8086 22b7 - USB device
- device pci 18.0 on end # 8086 22c0 - SIO - DMA
- device pci 18.1 on end # 8086 22c1 - I2C Port 1
- device pci 18.2 on end # 8086 22c2 - I2C Port 2
- device pci 18.3 off end # 8086 22c3 - I2C Port 3
- device pci 18.4 off end # 8086 22c4 - I2C Port 4
- device pci 18.5 off end # 8086 22c5 - I2C Port 5
- device pci 18.6 on end # 8086 22c6 - I2C Port 6
- device pci 18.7 off end # 8086 22c7 - I2C Port 7
- device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine
- device pci 1b.0 on end # 8086 2284 - HD Audio
- device pci 1c.0 on end # 8086 22c8 - PCIe Root Port 1
- device pci 1c.1 on end # 8086 0000 - PCIe Root Port 2
- device pci 1c.2 on end # 8086 22cc - PCIe Root Port 3
- device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4
- device pci 1e.0 on end # 8086 2286 - SIO - DMA
- device pci 1e.1 off end # 8086 0F08 - PWM 1
- device pci 1e.2 off end # 8086 0F09 - PWM 2
- device pci 1e.3 on end # 8086 228a - HSUART 1
- device pci 1e.4 off end # 8086 228c - HSUART 2
- device pci 1e.5 on end # 8086 228e - SPI 1
- device pci 1e.6 off end # 8086 2290 - SPI 2
- device pci 1e.7 off end # 8086 22ac - SPI 3
- device pci 1f.0 on # 8086 229c - LPC bridge
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- device pnp 0c09.0 on end
- end
- end # LPC Bridge
- device pci 1f.3 off end # 8086 0F12 - SMBus 0
- end
-end
diff --git a/src/mainboard/google/cyan/variants/cyan/overridetree.cb b/src/mainboard/google/cyan/variants/cyan/overridetree.cb
new file mode 100644
index 0000000000..10df7ab023
--- /dev/null
+++ b/src/mainboard/google/cyan/variants/cyan/overridetree.cb
@@ -0,0 +1,18 @@
+chip soc/intel/braswell
+
+ register "PcdCaMirrorEn" = "0"
+
+ register "PcdEnableI2C0" = "1" # Touchscreen
+ register "PcdEnableI2C4" = "0" # No Realtek Audio
+
+ register "ChvSvidConfig" = "SVID_CONFIG1"
+
+ register "PMIC_I2CBus" = "0"
+
+ register "I2C1Frequency" = "1"
+
+ device domain 0 on
+ device pci 18.1 on end # 8086 22c1 - I2C Port 1: Touchscreen
+ device pci 18.5 off end # 8086 22c5 - I2C Port 5: Realtek Audio
+ end
+end
diff --git a/src/mainboard/google/cyan/variants/edgar/devicetree.cb b/src/mainboard/google/cyan/variants/edgar/devicetree.cb
deleted file mode 100644
index 0ba221e3a6..0000000000
--- a/src/mainboard/google/cyan/variants/edgar/devicetree.cb
+++ /dev/null
@@ -1,140 +0,0 @@
-chip soc/intel/braswell
-
- ############################################################
- # Set the parameters for MemoryInit
- ############################################################
-
- register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB
-
- register "PcdMrcInitMmioSize" = "0x0800"
- register "PcdMrcInitSpdAddr1" = "0xa0"
- register "PcdMrcInitSpdAddr2" = "0xa2"
- register "PcdIgdDvmt50PreAlloc" = "1"
- register "PcdApertureSize" = "2"
- register "PcdGttSize" = "1"
- register "PcdDvfsEnable" = "1"
- register "PcdCaMirrorEn" = "1"
-
- ############################################################
- # Set the parameters for SiliconInit
- ############################################################
-
- register "PcdSdcardMode" = "PCH_DISABLED"
- register "PcdEnableHsuart0" = "0"
- register "PcdEnableHsuart1" = "1"
- register "PcdEnableAzalia" = "1"
- register "PcdEnableXhci" = "1"
- register "PcdEnableLpe" = "1"
- register "PcdEnableDma0" = "1"
- register "PcdEnableDma1" = "1"
- register "PcdEnableI2C0" = "0"
- register "PcdEnableI2C1" = "0"
- register "PcdEnableI2C2" = "0"
- register "PcdEnableI2C3" = "0"
- register "PcdEnableI2C4" = "1"
- register "PcdEnableI2C5" = "1"
- register "PcdEnableI2C6" = "0"
- register "PunitPwrConfigDisable" = "0" # Enable SVID
- register "ChvSvidConfig" = "SVID_PMIC_CONFIG"
- register "PcdEmmcMode" = "PCH_ACPI_MODE"
- register "PcdUsb3ClkSsc" = "1"
- register "PcdDispClkSsc" = "1"
- register "PcdSataClkSsc" = "1"
- register "PcdEnableSata" = "0" # Disable SATA
- register "Usb2Port0PerPortPeTxiSet" = "7"
- register "Usb2Port0PerPortTxiSet" = "5"
- register "Usb2Port0IUsbTxEmphasisEn" = "2"
- register "Usb2Port0PerPortTxPeHalf" = "1"
- register "Usb2Port1PerPortPeTxiSet" = "7"
- register "Usb2Port1PerPortTxiSet" = "3"
- register "Usb2Port1IUsbTxEmphasisEn" = "2"
- register "Usb2Port1PerPortTxPeHalf" = "1"
- register "Usb2Port2PerPortPeTxiSet" = "7"
- register "Usb2Port2PerPortTxiSet" = "3"
- register "Usb2Port2IUsbTxEmphasisEn" = "2"
- register "Usb2Port2PerPortTxPeHalf" = "1"
- register "Usb2Port3PerPortPeTxiSet" = "7"
- register "Usb2Port3PerPortTxiSet" = "6"
- register "Usb2Port3IUsbTxEmphasisEn" = "3"
- register "Usb2Port3PerPortTxPeHalf" = "1"
- register "Usb2Port4PerPortPeTxiSet" = "7"
- register "Usb2Port4PerPortTxiSet" = "0"
- register "Usb2Port4IUsbTxEmphasisEn" = "2"
- register "Usb2Port4PerPortTxPeHalf" = "1"
- register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a"
- register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a"
- register "PcdSataInterfaceSpeed" = "3"
- register "PcdPchSsicEnable" = "0"
- register "PcdPchUsbHsicPort" = "0"
- register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM
- register "PMIC_I2CBus" = "1"
- register "ISPEnable" = "0" # Disable IUNIT
- register "ISPPciDevConfig" = "3"
- register "PcdSdDetectChk" = "0" # Disable SD card detect
-
- # LPE audio codec settings
- register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock
-
- # Enable devices in ACPI mode
- register "lpss_acpi_mode" = "1"
- register "emmc_acpi_mode" = "1"
- register "sd_acpi_mode" = "1"
- register "lpe_acpi_mode" = "1"
-
- # Disable SLP_X stretching after SUS power well fail.
- register "disable_slp_x_stretch_sus_fail" = "1"
-
- # Allow PCIe devices to wake system from suspend
- register "pcie_wake_enable" = "1"
-
- device cpu_cluster 0 on
- device lapic 0 on end
- end
- device domain 0 on
- # EDS Table 24-4, Figure 24-5
- device pci 00.0 on end # 8086 2280 - SoC transaction router
- device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display
- device pci 03.0 off end # 8086 22b8 - Camera and Image Processor
- device pci 0b.0 on end # 8086 22dc - ?
- device pci 10.0 on end # 8086 2294 - MMC Port
- device pci 11.0 off end # 8086 0F15 - SDIO Port
- device pci 12.0 off end # 8086 0F16 - SD Port
- device pci 13.0 off end # 8086 22a3 - Sata controller
- device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time
- device pci 15.0 on end # 8086 22a8 - LP Engine Audio
- device pci 16.0 off end # 8086 22b7 - USB device
- device pci 18.0 on end # 8086 22c0 - SIO - DMA
- device pci 18.1 off end # 8086 22c1 - I2C Port 1
- device pci 18.2 on end # 8086 22c2 - I2C Port 2
- device pci 18.3 off end # 8086 22c3 - I2C Port 3
- device pci 18.4 off end # 8086 22c4 - I2C Port 4
- device pci 18.5 on end # 8086 22c5 - I2C Port 5
- device pci 18.6 on end # 8086 22c6 - I2C Port 6
- device pci 18.7 off end # 8086 22c7 - I2C Port 7
- device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine
- device pci 1b.0 on end # 8086 0F04 - HD Audio
- device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1
- device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2
- device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3
- device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4
- device pci 1e.0 on end # 8086 2286 - SIO - DMA
- device pci 1e.1 off end # 8086 0F08 - PWM 1
- device pci 1e.2 off end # 8086 0F09 - PWM 2
- device pci 1e.3 on end # 8086 228a - HSUART 1
- device pci 1e.4 off end # 8086 228c - HSUART 2
- device pci 1e.5 on end # 8086 228e - SPI 1
- device pci 1e.6 off end # 8086 2290 - SPI 2
- device pci 1e.7 off end # 8086 22ac - SPI 3
- device pci 1f.0 on # 8086 229c - LPC bridge
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- device pnp 0c09.0 on end
- end
- end # LPC Bridge
- device pci 1f.3 off end # 8086 0F12 - SMBus 0
- end
-end
diff --git a/src/mainboard/google/cyan/variants/edgar/overridetree.cb b/src/mainboard/google/cyan/variants/edgar/overridetree.cb
new file mode 100644
index 0000000000..48b10134f7
--- /dev/null
+++ b/src/mainboard/google/cyan/variants/edgar/overridetree.cb
@@ -0,0 +1,32 @@
+chip soc/intel/braswell
+
+ register "PcdSdcardMode" = "PCH_DISABLED"
+
+ register "Usb2Port0PerPortPeTxiSet" = "7"
+ register "Usb2Port0PerPortTxiSet" = "5"
+ register "Usb2Port0IUsbTxEmphasisEn" = "2"
+ register "Usb2Port0PerPortTxPeHalf" = "1"
+ register "Usb2Port1PerPortPeTxiSet" = "7"
+ register "Usb2Port1PerPortTxiSet" = "3"
+ register "Usb2Port1IUsbTxEmphasisEn" = "2"
+ register "Usb2Port1PerPortTxPeHalf" = "1"
+ register "Usb2Port2PerPortPeTxiSet" = "7"
+ register "Usb2Port2PerPortTxiSet" = "3"
+ register "Usb2Port2IUsbTxEmphasisEn" = "2"
+ register "Usb2Port2PerPortTxPeHalf" = "1"
+ register "Usb2Port3PerPortPeTxiSet" = "7"
+ register "Usb2Port3PerPortTxiSet" = "6"
+ register "Usb2Port3IUsbTxEmphasisEn" = "3"
+ register "Usb2Port3PerPortTxPeHalf" = "1"
+ register "Usb2Port4PerPortPeTxiSet" = "7"
+ register "Usb2Port4PerPortTxiSet" = "0"
+ register "Usb2Port4IUsbTxEmphasisEn" = "2"
+ register "Usb2Port4PerPortTxPeHalf" = "1"
+
+ register "PcdPchSsicEnable" = "0"
+ register "PcdPchUsbHsicPort" = "0"
+
+ device domain 0 on
+ device pci 12.0 off end # 8086 0F16 - SD Port
+ end
+end
diff --git a/src/mainboard/google/cyan/variants/kefka/devicetree.cb b/src/mainboard/google/cyan/variants/kefka/devicetree.cb
deleted file mode 100644
index 807dbcb2fe..0000000000
--- a/src/mainboard/google/cyan/variants/kefka/devicetree.cb
+++ /dev/null
@@ -1,146 +0,0 @@
-chip soc/intel/braswell
-
- ############################################################
- # Set the parameters for MemoryInit
- ############################################################
-
- register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB
-
- register "PcdMrcInitMmioSize" = "0x0800"
- register "PcdMrcInitSpdAddr1" = "0xa0"
- register "PcdMrcInitSpdAddr2" = "0xa2"
- register "PcdIgdDvmt50PreAlloc" = "1"
- register "PcdApertureSize" = "2"
- register "PcdGttSize" = "1"
- register "PcdDvfsEnable" = "1"
- register "PcdCaMirrorEn" = "1"
-
- ############################################################
- # Set the parameters for SiliconInit
- ############################################################
-
- register "PcdSdcardMode" = "PCH_ACPI_MODE"
- register "PcdEnableHsuart0" = "0"
- register "PcdEnableHsuart1" = "1"
- register "PcdEnableAzalia" = "1"
- register "PcdEnableXhci" = "1"
- register "PcdEnableLpe" = "1"
- register "PcdEnableDma0" = "1"
- register "PcdEnableDma1" = "1"
- register "PcdEnableI2C0" = "1"
- register "PcdEnableI2C1" = "1"
- register "PcdEnableI2C2" = "0"
- register "PcdEnableI2C3" = "0"
- register "PcdEnableI2C4" = "1"
- register "PcdEnableI2C5" = "1"
- register "PcdEnableI2C6" = "0"
- register "PunitPwrConfigDisable" = "0" # Enable SVID
- register "ChvSvidConfig" = "SVID_PMIC_CONFIG"
- register "PcdEmmcMode" = "PCH_ACPI_MODE"
- register "PcdUsb3ClkSsc" = "1"
- register "PcdDispClkSsc" = "1"
- register "PcdSataClkSsc" = "1"
- register "PcdEnableSata" = "0" # Disable SATA
- register "Usb2Port0PerPortPeTxiSet" = "7"
- register "Usb2Port0PerPortTxiSet" = "5"
- register "Usb2Port0IUsbTxEmphasisEn" = "2"
- register "Usb2Port0PerPortTxPeHalf" = "1"
- register "Usb2Port1PerPortPeTxiSet" = "7"
- register "Usb2Port1PerPortTxiSet" = "3"
- register "Usb2Port1IUsbTxEmphasisEn" = "2"
- register "Usb2Port1PerPortTxPeHalf" = "1"
- register "Usb2Port2PerPortPeTxiSet" = "7"
- register "Usb2Port2PerPortTxiSet" = "3"
- register "Usb2Port2IUsbTxEmphasisEn" = "2"
- register "Usb2Port2PerPortTxPeHalf" = "1"
- register "Usb2Port3PerPortPeTxiSet" = "7"
- register "Usb2Port3PerPortTxiSet" = "3"
- register "Usb2Port3IUsbTxEmphasisEn" = "2"
- register "Usb2Port3PerPortTxPeHalf" = "1"
- register "Usb2Port4PerPortPeTxiSet" = "7"
- register "Usb2Port4PerPortTxiSet" = "3"
- register "Usb2Port4IUsbTxEmphasisEn" = "2"
- register "Usb2Port4PerPortTxPeHalf" = "1"
- register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a"
- register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a"
- register "PcdSataInterfaceSpeed" = "3"
- register "PcdPchSsicEnable" = "1"
- register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM
- register "PMIC_I2CBus" = "1"
- register "ISPEnable" = "0" # Disable IUNIT
- register "ISPPciDevConfig" = "3"
- register "PcdSdDetectChk" = "0" # Disable SD card detect
- register "I2C0Frequency" = "1"
- register "I2C1Frequency" = "2" # Set the PMIC clock speed to 1Mhz
- register "I2C2Frequency" = "1"
- register "I2C3Frequency" = "1"
- register "I2C4Frequency" = "1"
- register "I2C5Frequency" = "1"
- register "I2C6Frequency" = "1"
-
- # LPE audio codec settings
- register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock
-
- # Enable devices in ACPI mode
- register "lpss_acpi_mode" = "1"
- register "emmc_acpi_mode" = "1"
- register "sd_acpi_mode" = "1"
- register "lpe_acpi_mode" = "1"
-
- # Disable SLP_X stretching after SUS power well fail.
- register "disable_slp_x_stretch_sus_fail" = "1"
-
- # Allow PCIe devices to wake system from suspend
- register "pcie_wake_enable" = "1"
-
- device cpu_cluster 0 on
- device lapic 0 on end
- end
- device domain 0 on
- # EDS Table 24-4, Figure 24-5
- device pci 00.0 on end # 8086 2280 - SoC transaction router
- device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display
- device pci 03.0 off end # 8086 22b8 - Camera and Image Processor
- device pci 0b.0 on end # 8086 22dc - ?
- device pci 10.0 on end # 8086 2294 - MMC Port
- device pci 11.0 off end # 8086 0F15 - SDIO Port
- device pci 12.0 on end # 8086 0F16 - SD Port
- device pci 13.0 off end # 8086 22a3 - Sata controller
- device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time
- device pci 15.0 on end # 8086 22a8 - LP Engine Audio
- device pci 16.0 off end # 8086 22b7 - USB device
- device pci 18.0 on end # 8086 22c0 - SIO - DMA
- device pci 18.1 on end # 8086 22c1 - I2C Port 1
- device pci 18.2 on end # 8086 22c2 - I2C Port 2
- device pci 18.3 off end # 8086 22c3 - I2C Port 3
- device pci 18.4 off end # 8086 22c4 - I2C Port 4
- device pci 18.5 on end # 8086 22c5 - I2C Port 5
- device pci 18.6 on end # 8086 22c6 - I2C Port 6
- device pci 18.7 off end # 8086 22c7 - I2C Port 7
- device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine
- device pci 1b.0 on end # 8086 0F04 - HD Audio
- device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1
- device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2
- device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3
- device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4
- device pci 1e.0 on end # 8086 2286 - SIO - DMA
- device pci 1e.1 off end # 8086 0F08 - PWM 1
- device pci 1e.2 off end # 8086 0F09 - PWM 2
- device pci 1e.3 on end # 8086 228a - HSUART 1
- device pci 1e.4 off end # 8086 228c - HSUART 2
- device pci 1e.5 off end # 8086 228e - SPI 1
- device pci 1e.6 off end # 8086 2290 - SPI 2
- device pci 1e.7 off end # 8086 22ac - SPI 3
- device pci 1f.0 on # 8086 229c - LPC bridge
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- device pnp 0c09.0 on end
- end
- end # LPC Bridge
- device pci 1f.3 off end # 8086 0F12 - SMBus 0
- end
-end
diff --git a/src/mainboard/google/cyan/variants/kefka/overridetree.cb b/src/mainboard/google/cyan/variants/kefka/overridetree.cb
new file mode 100644
index 0000000000..41908e0d4c
--- /dev/null
+++ b/src/mainboard/google/cyan/variants/kefka/overridetree.cb
@@ -0,0 +1,8 @@
+chip soc/intel/braswell
+
+ register "PcdEnableI2C0" = "1" # Touchscreen
+
+ device domain 0 on
+ device pci 18.1 on end # 8086 22c1 - I2C Port 1: Touchscreen
+ end
+end
diff --git a/src/mainboard/google/cyan/variants/reks/devicetree.cb b/src/mainboard/google/cyan/variants/reks/devicetree.cb
deleted file mode 100644
index 302f2da620..0000000000
--- a/src/mainboard/google/cyan/variants/reks/devicetree.cb
+++ /dev/null
@@ -1,137 +0,0 @@
-chip soc/intel/braswell
-
- ############################################################
- # Set the parameters for MemoryInit
- ############################################################
-
- register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB
-
- register "PcdMrcInitMmioSize" = "0x0800"
- register "PcdMrcInitSpdAddr1" = "0xa0"
- register "PcdMrcInitSpdAddr2" = "0xa2"
- register "PcdIgdDvmt50PreAlloc" = "1"
- register "PcdApertureSize" = "2"
- register "PcdGttSize" = "1"
- register "PcdDvfsEnable" = "1"
- register "PcdCaMirrorEn" = "1"
-
- ############################################################
- # Set the parameters for SiliconInit
- ############################################################
- register "PcdSdcardMode" = "PCH_ACPI_MODE"
- register "PcdEnableHsuart0" = "0"
- register "PcdEnableHsuart1" = "1"
- register "PcdEnableAzalia" = "1"
- register "PcdEnableXhci" = "1"
- register "PcdEnableLpe" = "1"
- register "PcdEnableDma0" = "1"
- register "PcdEnableDma1" = "1"
- register "PcdEnableI2C0" = "1"
- register "PcdEnableI2C1" = "1"
- register "PcdEnableI2C2" = "0"
- register "PcdEnableI2C3" = "0"
- register "PcdEnableI2C4" = "1"
- register "PcdEnableI2C5" = "1"
- register "PcdEnableI2C6" = "0"
- register "PunitPwrConfigDisable" = "0" # Enable SVID
- register "ChvSvidConfig" = "SVID_PMIC_CONFIG"
- register "PcdEmmcMode" = "PCH_ACPI_MODE"
- register "PcdUsb3ClkSsc" = "1"
- register "PcdDispClkSsc" = "1"
- register "PcdSataClkSsc" = "1"
- register "PcdEnableSata" = "0" # Disable SATA
- register "Usb2Port0PerPortPeTxiSet" = "7"
- register "Usb2Port0PerPortTxiSet" = "5"
- register "Usb2Port0IUsbTxEmphasisEn" = "2"
- register "Usb2Port0PerPortTxPeHalf" = "1"
- register "Usb2Port1PerPortPeTxiSet" = "7"
- register "Usb2Port1PerPortTxiSet" = "7"
- register "Usb2Port1IUsbTxEmphasisEn" = "2"
- register "Usb2Port1PerPortTxPeHalf" = "1"
- register "Usb2Port2PerPortPeTxiSet" = "7"
- register "Usb2Port2PerPortTxiSet" = "3"
- register "Usb2Port2IUsbTxEmphasisEn" = "2"
- register "Usb2Port2PerPortTxPeHalf" = "1"
- register "Usb2Port3PerPortPeTxiSet" = "7"
- register "Usb2Port3PerPortTxiSet" = "3"
- register "Usb2Port3IUsbTxEmphasisEn" = "2"
- register "Usb2Port3PerPortTxPeHalf" = "1"
- register "Usb2Port4PerPortPeTxiSet" = "7"
- register "Usb2Port4PerPortTxiSet" = "3"
- register "Usb2Port4IUsbTxEmphasisEn" = "2"
- register "Usb2Port4PerPortTxPeHalf" = "1"
- register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a"
- register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a"
- register "PcdSataInterfaceSpeed" = "3"
- register "PcdPchSsicEnable" = "1"
- register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM
- register "PMIC_I2CBus" = "1"
- register "ISPEnable" = "0" # Disable IUNIT
- register "ISPPciDevConfig" = "3"
- register "PcdSdDetectChk" = "0" # Disable SD card detect
- # LPE audio codec settings
- register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock
-
- # Enable devices in ACPI mode
- register "lpss_acpi_mode" = "1"
- register "emmc_acpi_mode" = "1"
- register "sd_acpi_mode" = "1"
- register "lpe_acpi_mode" = "1"
-
- # Disable SLP_X stretching after SUS power well fail.
- register "disable_slp_x_stretch_sus_fail" = "1"
-
- # Allow PCIe devices to wake system from suspend
- register "pcie_wake_enable" = "1"
-
- device cpu_cluster 0 on
- device lapic 0 on end
- end
- device domain 0 on
- # EDS Table 24-4, Figure 24-5
- device pci 00.0 on end # 8086 2280 - SoC transaction router
- device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display
- device pci 03.0 off end # 8086 22b8 - Camera and Image Processor
- device pci 0b.0 on end # 8086 22dc - ?
- device pci 10.0 on end # 8086 2294 - MMC Port
- device pci 11.0 off end # 8086 0F15 - SDIO Port
- device pci 12.0 on end # 8086 0F16 - SD Port
- device pci 13.0 off end # 8086 22a3 - Sata controller
- device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time
- device pci 15.0 on end # 8086 22a8 - LP Engine Audio
- device pci 16.0 off end # 8086 22b7 - USB device
- device pci 18.0 on end # 8086 22c0 - SIO - DMA
- device pci 18.1 on end # 8086 22c1 - I2C Port 1
- device pci 18.2 on end # 8086 22c2 - I2C Port 2
- device pci 18.3 off end # 8086 22c3 - I2C Port 3
- device pci 18.4 off end # 8086 22c4 - I2C Port 4
- device pci 18.5 on end # 8086 22c5 - I2C Port 5
- device pci 18.6 on end # 8086 22c6 - I2C Port 6
- device pci 18.7 off end # 8086 22c7 - I2C Port 7
- device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine
- device pci 1b.0 on end # 8086 0F04 - HD Audio
- device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1
- device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2
- device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3
- device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4
- device pci 1e.0 on end # 8086 2286 - SIO - DMA
- device pci 1e.1 off end # 8086 0F08 - PWM 1
- device pci 1e.2 off end # 8086 0F09 - PWM 2
- device pci 1e.3 off end # 8086 228a - HSUART 1
- device pci 1e.4 off end # 8086 228c - HSUART 2
- device pci 1e.5 on end # 8086 228e - SPI 1
- device pci 1e.6 off end # 8086 2290 - SPI 2
- device pci 1e.7 off end # 8086 22ac - SPI 3
- device pci 1f.0 on # 8086 229c - LPC bridge
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- device pnp 0c09.0 on end
- end
- end # LPC Bridge
- device pci 1f.3 off end # 8086 0F12 - SMBus 0
- end
-end
diff --git a/src/mainboard/google/cyan/variants/reks/overridetree.cb b/src/mainboard/google/cyan/variants/reks/overridetree.cb
new file mode 100644
index 0000000000..9b10656b2e
--- /dev/null
+++ b/src/mainboard/google/cyan/variants/reks/overridetree.cb
@@ -0,0 +1,29 @@
+chip soc/intel/braswell
+
+ register "PcdEnableI2C0" = "1" # Touchscreen
+
+ register "Usb2Port0PerPortPeTxiSet" = "7"
+ register "Usb2Port0PerPortTxiSet" = "5"
+ register "Usb2Port0IUsbTxEmphasisEn" = "2"
+ register "Usb2Port0PerPortTxPeHalf" = "1"
+ register "Usb2Port1PerPortPeTxiSet" = "7"
+ register "Usb2Port1PerPortTxiSet" = "7"
+ register "Usb2Port1IUsbTxEmphasisEn" = "2"
+ register "Usb2Port1PerPortTxPeHalf" = "1"
+ register "Usb2Port2PerPortPeTxiSet" = "7"
+ register "Usb2Port2PerPortTxiSet" = "3"
+ register "Usb2Port2IUsbTxEmphasisEn" = "2"
+ register "Usb2Port2PerPortTxPeHalf" = "1"
+ register "Usb2Port3PerPortPeTxiSet" = "7"
+ register "Usb2Port3PerPortTxiSet" = "3"
+ register "Usb2Port3IUsbTxEmphasisEn" = "2"
+ register "Usb2Port3PerPortTxPeHalf" = "1"
+ register "Usb2Port4PerPortPeTxiSet" = "7"
+ register "Usb2Port4PerPortTxiSet" = "3"
+ register "Usb2Port4IUsbTxEmphasisEn" = "2"
+ register "Usb2Port4PerPortTxPeHalf" = "1"
+
+ device domain 0 on
+ device pci 18.1 on end # 8086 22c1 - I2C Port 1: Touchscreen
+ end
+end
diff --git a/src/mainboard/google/cyan/variants/relm/devicetree.cb b/src/mainboard/google/cyan/variants/relm/devicetree.cb
deleted file mode 100644
index e1bbb0ac5b..0000000000
--- a/src/mainboard/google/cyan/variants/relm/devicetree.cb
+++ /dev/null
@@ -1,146 +0,0 @@
-chip soc/intel/braswell
-
- ############################################################
- # Set the parameters for MemoryInit
- ############################################################
-
- register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB
-
- register "PcdMrcInitMmioSize" = "0x0800"
- register "PcdMrcInitSpdAddr1" = "0xa0"
- register "PcdMrcInitSpdAddr2" = "0xa2"
- register "PcdIgdDvmt50PreAlloc" = "1"
- register "PcdApertureSize" = "2"
- register "PcdGttSize" = "1"
- register "PcdDvfsEnable" = "1"
- register "PcdCaMirrorEn" = "1"
-
- ############################################################
- # Set the parameters for SiliconInit
- ############################################################
-
- register "PcdSdcardMode" = "PCH_ACPI_MODE"
- register "PcdEnableHsuart0" = "0"
- register "PcdEnableHsuart1" = "1"
- register "PcdEnableAzalia" = "1"
- register "PcdEnableXhci" = "1"
- register "PcdEnableLpe" = "1"
- register "PcdEnableDma0" = "1"
- register "PcdEnableDma1" = "1"
- register "PcdEnableI2C0" = "1"
- register "PcdEnableI2C1" = "1"
- register "PcdEnableI2C2" = "0"
- register "PcdEnableI2C3" = "0"
- register "PcdEnableI2C4" = "1"
- register "PcdEnableI2C5" = "1"
- register "PcdEnableI2C6" = "0"
- register "PunitPwrConfigDisable" = "0" # Enable SVID
- register "ChvSvidConfig" = "SVID_PMIC_CONFIG"
- register "PcdEmmcMode" = "PCH_ACPI_MODE"
- register "PcdUsb3ClkSsc" = "1"
- register "PcdDispClkSsc" = "1"
- register "PcdSataClkSsc" = "1"
- register "PcdEnableSata" = "0" # Disable SATA
- register "Usb2Port0PerPortPeTxiSet" = "7"
- register "Usb2Port0PerPortTxiSet" = "5"
- register "Usb2Port0IUsbTxEmphasisEn" = "2"
- register "Usb2Port0PerPortTxPeHalf" = "1"
- register "Usb2Port1PerPortPeTxiSet" = "7"
- register "Usb2Port1PerPortTxiSet" = "3"
- register "Usb2Port1IUsbTxEmphasisEn" = "2"
- register "Usb2Port1PerPortTxPeHalf" = "1"
- register "Usb2Port2PerPortPeTxiSet" = "7"
- register "Usb2Port2PerPortTxiSet" = "3"
- register "Usb2Port2IUsbTxEmphasisEn" = "2"
- register "Usb2Port2PerPortTxPeHalf" = "1"
- register "Usb2Port3PerPortPeTxiSet" = "7"
- register "Usb2Port3PerPortTxiSet" = "3"
- register "Usb2Port3IUsbTxEmphasisEn" = "2"
- register "Usb2Port3PerPortTxPeHalf" = "1"
- register "Usb2Port4PerPortPeTxiSet" = "7"
- register "Usb2Port4PerPortTxiSet" = "3"
- register "Usb2Port4IUsbTxEmphasisEn" = "2"
- register "Usb2Port4PerPortTxPeHalf" = "1"
- register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a"
- register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a"
- register "PcdSataInterfaceSpeed" = "3"
- register "PcdPchSsicEnable" = "1"
- register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM
- register "PMIC_I2CBus" = "1"
- register "ISPEnable" = "0" # Disable IUNIT
- register "ISPPciDevConfig" = "3"
- register "PcdSdDetectChk" = "0" # Disable SD card detect
- register "I2C0Frequency" = "1"
- register "I2C1Frequency" = "2" # Set the PMIC clock speed to 1Mhz
- register "I2C2Frequency" = "1"
- register "I2C3Frequency" = "1"
- register "I2C4Frequency" = "1"
- register "I2C5Frequency" = "1"
- register "I2C6Frequency" = "1"
-
- # LPE audio codec settings
- register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock
-
- # Enable devices in ACPI mode
- register "lpss_acpi_mode" = "1"
- register "emmc_acpi_mode" = "1"
- register "sd_acpi_mode" = "1"
- register "lpe_acpi_mode" = "1"
-
- # Disable SLP_X stretching after SUS power well fail.
- register "disable_slp_x_stretch_sus_fail" = "1"
-
- # Allow PCIe devices to wake system from suspend
- register "pcie_wake_enable" = "1"
-
- device cpu_cluster 0 on
- device lapic 0 on end
- end
- device domain 0 on
- # EDS Table 24-4, Figure 24-5
- device pci 00.0 on end # 8086 2280 - SoC transaction router
- device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display
- device pci 03.0 off end # 8086 22b8 - Camera and Image Processor
- device pci 0b.0 on end # 8086 22dc - ?
- device pci 10.0 on end # 8086 2294 - MMC Port
- device pci 11.0 off end # 8086 0F15 - SDIO Port
- device pci 12.0 on end # 8086 0F16 - SD Port
- device pci 13.0 off end # 8086 22a3 - Sata controller
- device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time
- device pci 15.0 on end # 8086 22a8 - LP Engine Audio
- device pci 16.0 off end # 8086 22b7 - USB device
- device pci 18.0 on end # 8086 22c0 - SIO - DMA
- device pci 18.1 on end # 8086 22c1 - I2C Port 1
- device pci 18.2 on end # 8086 22c2 - I2C Port 2
- device pci 18.3 off end # 8086 22c3 - I2C Port 3
- device pci 18.4 off end # 8086 22c4 - I2C Port 4
- device pci 18.5 on end # 8086 22c5 - I2C Port 5
- device pci 18.6 on end # 8086 22c6 - I2C Port 6
- device pci 18.7 off end # 8086 22c7 - I2C Port 7
- device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine
- device pci 1b.0 on end # 8086 0F04 - HD Audio
- device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1
- device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2
- device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3
- device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4
- device pci 1e.0 on end # 8086 2286 - SIO - DMA
- device pci 1e.1 off end # 8086 0F08 - PWM 1
- device pci 1e.2 off end # 8086 0F09 - PWM 2
- device pci 1e.3 off end # 8086 228a - HSUART 1
- device pci 1e.4 off end # 8086 228c - HSUART 2
- device pci 1e.5 on end # 8086 228e - SPI 1
- device pci 1e.6 off end # 8086 2290 - SPI 2
- device pci 1e.7 off end # 8086 22ac - SPI 3
- device pci 1f.0 on # 8086 229c - LPC bridge
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- device pnp 0c09.0 on end
- end
- end # LPC Bridge
- device pci 1f.3 off end # 8086 0F12 - SMBus 0
- end
-end
diff --git a/src/mainboard/google/cyan/variants/relm/overridetree.cb b/src/mainboard/google/cyan/variants/relm/overridetree.cb
new file mode 100644
index 0000000000..41908e0d4c
--- /dev/null
+++ b/src/mainboard/google/cyan/variants/relm/overridetree.cb
@@ -0,0 +1,8 @@
+chip soc/intel/braswell
+
+ register "PcdEnableI2C0" = "1" # Touchscreen
+
+ device domain 0 on
+ device pci 18.1 on end # 8086 22c1 - I2C Port 1: Touchscreen
+ end
+end
diff --git a/src/mainboard/google/cyan/variants/setzer/devicetree.cb b/src/mainboard/google/cyan/variants/setzer/devicetree.cb
deleted file mode 100644
index f0b2c6f976..0000000000
--- a/src/mainboard/google/cyan/variants/setzer/devicetree.cb
+++ /dev/null
@@ -1,146 +0,0 @@
-chip soc/intel/braswell
-
- ############################################################
- # Set the parameters for MemoryInit
- ############################################################
-
- register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB
-
- register "PcdMrcInitMmioSize" = "0x0800"
- register "PcdMrcInitSpdAddr1" = "0xa0"
- register "PcdMrcInitSpdAddr2" = "0xa2"
- register "PcdIgdDvmt50PreAlloc" = "1"
- register "PcdApertureSize" = "2"
- register "PcdGttSize" = "1"
- register "PcdDvfsEnable" = "1"
- register "PcdCaMirrorEn" = "1"
-
- ############################################################
- # Set the parameters for SiliconInit
- ############################################################
-
- register "PcdSdcardMode" = "PCH_ACPI_MODE"
- register "PcdEnableHsuart0" = "0"
- register "PcdEnableHsuart1" = "1"
- register "PcdEnableAzalia" = "1"
- register "PcdEnableXhci" = "1"
- register "PcdEnableLpe" = "1"
- register "PcdEnableDma0" = "1"
- register "PcdEnableDma1" = "1"
- register "PcdEnableI2C0" = "1"
- register "PcdEnableI2C1" = "1"
- register "PcdEnableI2C2" = "0"
- register "PcdEnableI2C3" = "0"
- register "PcdEnableI2C4" = "1"
- register "PcdEnableI2C5" = "1"
- register "PcdEnableI2C6" = "0"
- register "PunitPwrConfigDisable" = "0" # Enable SVID
- register "ChvSvidConfig" = "SVID_PMIC_CONFIG"
- register "PcdEmmcMode" = "PCH_ACPI_MODE"
- register "PcdUsb3ClkSsc" = "1"
- register "PcdDispClkSsc" = "1"
- register "PcdSataClkSsc" = "1"
- register "PcdEnableSata" = "0" # Disable SATA
- register "Usb2Port0PerPortPeTxiSet" = "7"
- register "Usb2Port0PerPortTxiSet" = "5"
- register "Usb2Port0IUsbTxEmphasisEn" = "2"
- register "Usb2Port0PerPortTxPeHalf" = "1"
- register "Usb2Port1PerPortPeTxiSet" = "7"
- register "Usb2Port1PerPortTxiSet" = "3"
- register "Usb2Port1IUsbTxEmphasisEn" = "2"
- register "Usb2Port1PerPortTxPeHalf" = "1"
- register "Usb2Port2PerPortPeTxiSet" = "7"
- register "Usb2Port2PerPortTxiSet" = "3"
- register "Usb2Port2IUsbTxEmphasisEn" = "2"
- register "Usb2Port2PerPortTxPeHalf" = "1"
- register "Usb2Port3PerPortPeTxiSet" = "7"
- register "Usb2Port3PerPortTxiSet" = "3"
- register "Usb2Port3IUsbTxEmphasisEn" = "2"
- register "Usb2Port3PerPortTxPeHalf" = "1"
- register "Usb2Port4PerPortPeTxiSet" = "7"
- register "Usb2Port4PerPortTxiSet" = "3"
- register "Usb2Port4IUsbTxEmphasisEn" = "2"
- register "Usb2Port4PerPortTxPeHalf" = "1"
- register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a"
- register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a"
- register "PcdSataInterfaceSpeed" = "3"
- register "PcdPchSsicEnable" = "0"
- register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM
- register "PMIC_I2CBus" = "1"
- register "ISPEnable" = "0" # Disable IUNIT
- register "ISPPciDevConfig" = "3"
- register "PcdSdDetectChk" = "0" # Disable SD card detect
- register "I2C0Frequency" = "1"
- register "I2C1Frequency" = "2" # Set the PMIC clock speed to 1Mhz
- register "I2C2Frequency" = "1"
- register "I2C3Frequency" = "1"
- register "I2C4Frequency" = "1"
- register "I2C5Frequency" = "1"
- register "I2C6Frequency" = "1"
-
- # LPE audio codec settings
- register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock
-
- # Enable devices in ACPI mode
- register "lpss_acpi_mode" = "1"
- register "emmc_acpi_mode" = "1"
- register "sd_acpi_mode" = "1"
- register "lpe_acpi_mode" = "1"
-
- # Disable SLP_X stretching after SUS power well fail.
- register "disable_slp_x_stretch_sus_fail" = "1"
-
- # Allow PCIe devices to wake system from suspend
- register "pcie_wake_enable" = "1"
-
- device cpu_cluster 0 on
- device lapic 0 on end
- end
- device domain 0 on
- # EDS Table 24-4, Figure 24-5
- device pci 00.0 on end # 8086 2280 - SoC transaction router
- device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display
- device pci 03.0 off end # 8086 22b8 - Camera and Image Processor
- device pci 0b.0 on end # 8086 22dc - ?
- device pci 10.0 on end # 8086 2294 - MMC Port
- device pci 11.0 off end # 8086 0F15 - SDIO Port
- device pci 12.0 on end # 8086 0F16 - SD Port
- device pci 13.0 off end # 8086 22a3 - Sata controller
- device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time
- device pci 15.0 on end # 8086 22a8 - LP Engine Audio
- device pci 16.0 off end # 8086 22b7 - USB device
- device pci 18.0 on end # 8086 22c0 - SIO - DMA
- device pci 18.1 on end # 8086 22c1 - I2C Port 1
- device pci 18.2 on end # 8086 22c2 - I2C Port 2
- device pci 18.3 off end # 8086 22c3 - I2C Port 3
- device pci 18.4 off end # 8086 22c4 - I2C Port 4
- device pci 18.5 on end # 8086 22c5 - I2C Port 5
- device pci 18.6 on end # 8086 22c6 - I2C Port 6
- device pci 18.7 off end # 8086 22c7 - I2C Port 7
- device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine
- device pci 1b.0 on end # 8086 0F04 - HD Audio
- device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1
- device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2
- device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3
- device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4
- device pci 1e.0 on end # 8086 2286 - SIO - DMA
- device pci 1e.1 off end # 8086 0F08 - PWM 1
- device pci 1e.2 off end # 8086 0F09 - PWM 2
- device pci 1e.3 on end # 8086 228a - HSUART 1
- device pci 1e.4 off end # 8086 228c - HSUART 2
- device pci 1e.5 on end # 8086 228e - SPI 1
- device pci 1e.6 off end # 8086 2290 - SPI 2
- device pci 1e.7 off end # 8086 22ac - SPI 3
- device pci 1f.0 on # 8086 229c - LPC bridge
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- device pnp 0c09.0 on end
- end
- end # LPC Bridge
- device pci 1f.3 off end # 8086 0F12 - SMBus 0
- end
-end
diff --git a/src/mainboard/google/cyan/variants/setzer/overridetree.cb b/src/mainboard/google/cyan/variants/setzer/overridetree.cb
new file mode 100644
index 0000000000..d3d7f8dbc7
--- /dev/null
+++ b/src/mainboard/google/cyan/variants/setzer/overridetree.cb
@@ -0,0 +1,10 @@
+chip soc/intel/braswell
+
+ register "PcdEnableI2C0" = "1" # Touchscreen
+
+ register "PcdPchSsicEnable" = "0"
+
+ device domain 0 on
+ device pci 18.1 on end # 8086 22c1 - I2C Port 1: Touchscreen
+ end
+end
diff --git a/src/mainboard/google/cyan/variants/terra/overridetree.cb b/src/mainboard/google/cyan/variants/terra/overridetree.cb
new file mode 100644
index 0000000000..8b6b0078cd
--- /dev/null
+++ b/src/mainboard/google/cyan/variants/terra/overridetree.cb
@@ -0,0 +1,5 @@
+chip soc/intel/braswell
+
+ device domain 0 on end
+
+end
diff --git a/src/mainboard/google/cyan/variants/ultima/devicetree.cb b/src/mainboard/google/cyan/variants/ultima/devicetree.cb
deleted file mode 100644
index d4ed38b430..0000000000
--- a/src/mainboard/google/cyan/variants/ultima/devicetree.cb
+++ /dev/null
@@ -1,140 +0,0 @@
-chip soc/intel/braswell
-
- ############################################################
- # Set the parameters for MemoryInit
- ############################################################
-
- register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB
-
- register "PcdMrcInitMmioSize" = "0x0800"
- register "PcdMrcInitSpdAddr1" = "0xa0"
- register "PcdMrcInitSpdAddr2" = "0xa2"
- register "PcdIgdDvmt50PreAlloc" = "1"
- register "PcdApertureSize" = "2"
- register "PcdGttSize" = "1"
- register "PcdDvfsEnable" = "1"
- register "PcdCaMirrorEn" = "1"
-
- ############################################################
- # Set the parameters for SiliconInit
- ############################################################
-
- register "PcdSdcardMode" = "PCH_ACPI_MODE"
- register "PcdEnableHsuart0" = "0"
- register "PcdEnableHsuart1" = "0"
- register "PcdEnableAzalia" = "1"
- register "PcdEnableXhci" = "1"
- register "PcdEnableLpe" = "1"
- register "PcdEnableDma0" = "1"
- register "PcdEnableDma1" = "1"
- register "PcdEnableI2C0" = "1"
- register "PcdEnableI2C1" = "1"
- register "PcdEnableI2C2" = "0"
- register "PcdEnableI2C3" = "0"
- register "PcdEnableI2C4" = "1"
- register "PcdEnableI2C5" = "1"
- register "PcdEnableI2C6" = "0"
- register "PunitPwrConfigDisable" = "0" # Enable SVID
- register "ChvSvidConfig" = "SVID_PMIC_CONFIG"
- register "PcdEmmcMode" = "PCH_ACPI_MODE"
- register "PcdUsb3ClkSsc" = "1"
- register "PcdDispClkSsc" = "1"
- register "PcdSataClkSsc" = "1"
- register "PcdEnableSata" = "0" # Disable SATA
- register "Usb2Port0PerPortPeTxiSet" = "7"
- register "Usb2Port0PerPortTxiSet" = "5"
- register "Usb2Port0IUsbTxEmphasisEn" = "2"
- register "Usb2Port0PerPortTxPeHalf" = "1"
- register "Usb2Port1PerPortPeTxiSet" = "7"
- register "Usb2Port1PerPortTxiSet" = "3"
- register "Usb2Port1IUsbTxEmphasisEn" = "2"
- register "Usb2Port1PerPortTxPeHalf" = "1"
- register "Usb2Port2PerPortPeTxiSet" = "7"
- register "Usb2Port2PerPortTxiSet" = "3"
- register "Usb2Port2IUsbTxEmphasisEn" = "2"
- register "Usb2Port2PerPortTxPeHalf" = "1"
- register "Usb2Port3PerPortPeTxiSet" = "7"
- register "Usb2Port3PerPortTxiSet" = "3"
- register "Usb2Port3IUsbTxEmphasisEn" = "2"
- register "Usb2Port3PerPortTxPeHalf" = "1"
- register "Usb2Port4PerPortPeTxiSet" = "7"
- register "Usb2Port4PerPortTxiSet" = "3"
- register "Usb2Port4IUsbTxEmphasisEn" = "2"
- register "Usb2Port4PerPortTxPeHalf" = "1"
- register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a"
- register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a"
- register "PcdSataInterfaceSpeed" = "3"
- register "PcdPchSsicEnable" = "0"
- register "PcdPchUsbHsicPort" = "0"
- register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM
- register "PMIC_I2CBus" = "1"
- register "ISPEnable" = "0" # Disable IUNIT
- register "ISPPciDevConfig" = "3"
- register "PcdSdDetectChk" = "0" # Disable SD card detect
-
- # LPE audio codec settings
- register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock
-
- # Enable devices in ACPI mode
- register "lpss_acpi_mode" = "1"
- register "emmc_acpi_mode" = "1"
- register "sd_acpi_mode" = "1"
- register "lpe_acpi_mode" = "1"
-
- # Disable SLP_X stretching after SUS power well fail.
- register "disable_slp_x_stretch_sus_fail" = "1"
-
- # Allow PCIe devices to wake system from suspend
- register "pcie_wake_enable" = "1"
-
- device cpu_cluster 0 on
- device lapic 0 on end
- end
- device domain 0 on
- # EDS Table 24-4, Figure 24-5
- device pci 00.0 on end # 8086 2280 - SoC transaction router
- device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display
- device pci 03.0 off end # 8086 22b8 - Camera and Image Processor
- device pci 0b.0 on end # 8086 22dc - ?
- device pci 10.0 on end # 8086 2294 - MMC Port
- device pci 11.0 off end # 8086 0F15 - SDIO Port
- device pci 12.0 on end # 8086 0F16 - SD Port
- device pci 13.0 off end # 8086 22a3 - Sata controller
- device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time
- device pci 15.0 on end # 8086 22a8 - LP Engine Audio
- device pci 16.0 off end # 8086 22b7 - USB device
- device pci 18.0 on end # 8086 22c0 - SIO - DMA
- device pci 18.1 on end # 8086 22c1 - I2C Port 1
- device pci 18.2 on end # 8086 22c2 - I2C Port 2
- device pci 18.3 off end # 8086 22c3 - I2C Port 3
- device pci 18.4 off end # 8086 22c4 - I2C Port 4
- device pci 18.5 on end # 8086 22c5 - I2C Port 5
- device pci 18.6 on end # 8086 22c6 - I2C Port 6
- device pci 18.7 off end # 8086 22c7 - I2C Port 7
- device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine
- device pci 1b.0 on end # 8086 2284 - HD Audio
- device pci 1c.0 on end # 8086 22c8 - PCIe Root Port 1
- device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2
- device pci 1c.2 on end # 8086 22cc - PCIe Root Port 3
- device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4
- device pci 1e.0 on end # 8086 2286 - SIO - DMA
- device pci 1e.1 off end # 8086 0F08 - PWM 1
- device pci 1e.2 off end # 8086 0F09 - PWM 2
- device pci 1e.3 off end # 8086 228a - HSUART 1
- device pci 1e.4 off end # 8086 228c - HSUART 2
- device pci 1e.5 on end # 8086 228e - SPI 1
- device pci 1e.6 off end # 8086 2290 - SPI 2
- device pci 1e.7 off end # 8086 22ac - SPI 3
- device pci 1f.0 on # 8086 229c - LPC bridge
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- device pnp 0c09.0 on end
- end
- end # LPC Bridge
- device pci 1f.3 off end # 8086 0F12 - SMBus 0
- end
-end
diff --git a/src/mainboard/google/cyan/variants/ultima/overridetree.cb b/src/mainboard/google/cyan/variants/ultima/overridetree.cb
new file mode 100644
index 0000000000..b5aa652292
--- /dev/null
+++ b/src/mainboard/google/cyan/variants/ultima/overridetree.cb
@@ -0,0 +1,11 @@
+chip soc/intel/braswell
+
+ register "PcdEnableI2C0" = "1" # Touchscreen
+
+ register "PcdPchSsicEnable" = "0"
+ register "PcdPchUsbHsicPort" = "0"
+
+ device domain 0 on
+ device pci 18.1 on end # 8086 22c1 - I2C Port 1: Touchscreen
+ end
+end
diff --git a/src/mainboard/google/cyan/variants/wizpig/devicetree.cb b/src/mainboard/google/cyan/variants/wizpig/devicetree.cb
deleted file mode 100644
index 7be7a0f792..0000000000
--- a/src/mainboard/google/cyan/variants/wizpig/devicetree.cb
+++ /dev/null
@@ -1,147 +0,0 @@
-chip soc/intel/braswell
-
- ############################################################
- # Set the parameters for MemoryInit
- ############################################################
-
- register "PcdMrcInitTsegSize" = "8" # SMM Region size in MiB
-
- register "PcdMrcInitMmioSize" = "0x0800"
- register "PcdMrcInitSpdAddr1" = "0xa0"
- register "PcdMrcInitSpdAddr2" = "0xa2"
- register "PcdIgdDvmt50PreAlloc" = "1"
- register "PcdApertureSize" = "2"
- register "PcdGttSize" = "1"
- register "PcdDvfsEnable" = "1"
- register "PcdCaMirrorEn" = "1"
-
- ############################################################
- # Set the parameters for SiliconInit
- ############################################################
-
- register "PcdSdcardMode" = "PCH_ACPI_MODE"
- register "PcdEnableHsuart0" = "0"
- register "PcdEnableHsuart1" = "1"
- register "PcdEnableAzalia" = "1"
- register "PcdEnableXhci" = "1"
- register "PcdEnableLpe" = "1"
- register "PcdEnableDma0" = "1"
- register "PcdEnableDma1" = "1"
- register "PcdEnableI2C0" = "1"
- register "PcdEnableI2C1" = "1"
- register "PcdEnableI2C2" = "0"
- register "PcdEnableI2C3" = "0"
- register "PcdEnableI2C4" = "1"
- register "PcdEnableI2C5" = "1"
- register "PcdEnableI2C6" = "0"
- register "PunitPwrConfigDisable" = "0" # Enable SVID
- register "ChvSvidConfig" = "SVID_PMIC_CONFIG"
- register "PcdEmmcMode" = "PCH_ACPI_MODE"
- register "PcdUsb3ClkSsc" = "1"
- register "PcdDispClkSsc" = "1"
- register "PcdSataClkSsc" = "1"
- register "PcdEnableSata" = "0" # Disable SATA
- register "Usb2Port0PerPortPeTxiSet" = "7"
- register "Usb2Port0PerPortTxiSet" = "0"
- register "Usb2Port0IUsbTxEmphasisEn" = "2"
- register "Usb2Port0PerPortTxPeHalf" = "1"
- register "Usb2Port1PerPortPeTxiSet" = "7"
- register "Usb2Port1PerPortTxiSet" = "0"
- register "Usb2Port1IUsbTxEmphasisEn" = "2"
- register "Usb2Port1PerPortTxPeHalf" = "1"
- register "Usb2Port2PerPortPeTxiSet" = "7"
- register "Usb2Port2PerPortTxiSet" = "0"
- register "Usb2Port2IUsbTxEmphasisEn" = "2"
- register "Usb2Port2PerPortTxPeHalf" = "1"
- register "Usb2Port3PerPortPeTxiSet" = "7"
- register "Usb2Port3PerPortTxiSet" = "0"
- register "Usb2Port3IUsbTxEmphasisEn" = "2"
- register "Usb2Port3PerPortTxPeHalf" = "1"
- register "Usb2Port4PerPortPeTxiSet" = "7"
- register "Usb2Port4PerPortTxiSet" = "3"
- register "Usb2Port4IUsbTxEmphasisEn" = "2"
- register "Usb2Port4PerPortTxPeHalf" = "1"
- register "Usb3Lane0Ow2tapgen2deemph3p5" = "0x3a"
- register "Usb3Lane1Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane2Ow2tapgen2deemph3p5" = "0x64"
- register "Usb3Lane3Ow2tapgen2deemph3p5" = "0x3a"
- register "PcdSataInterfaceSpeed" = "3"
- register "PcdPchSsicEnable" = "0"
- register "PcdPchUsbHsicPort" = "0"
- register "PcdRtcLock" = "0" # Disable RTC access locking to NVRAM
- register "PMIC_I2CBus" = "1"
- register "ISPEnable" = "0" # Disable IUNIT
- register "ISPPciDevConfig" = "3"
- register "PcdSdDetectChk" = "0" # Disable SD card detect
- register "I2C0Frequency" = "1"
- register "I2C1Frequency" = "2" # Set the PMIC clock speed to 1Mhz
- register "I2C2Frequency" = "1"
- register "I2C3Frequency" = "1"
- register "I2C4Frequency" = "1"
- register "I2C5Frequency" = "1"
- register "I2C6Frequency" = "1"
-
- # LPE audio codec settings
- register "lpe_codec_clk_src" = "LPE_CLK_SRC_XTAL" # 19.2MHz clock
-
- # Enable devices in ACPI mode
- register "lpss_acpi_mode" = "1"
- register "emmc_acpi_mode" = "1"
- register "sd_acpi_mode" = "1"
- register "lpe_acpi_mode" = "1"
-
- # Disable SLP_X stretching after SUS power well fail.
- register "disable_slp_x_stretch_sus_fail" = "1"
-
- # Allow PCIe devices to wake system from suspend
- register "pcie_wake_enable" = "1"
-
- device cpu_cluster 0 on
- device lapic 0 on end
- end
- device domain 0 on
- # EDS Table 24-4, Figure 24-5
- device pci 00.0 on end # 8086 2280 - SoC transaction router
- device pci 02.0 on end # 8086 22b0/22b1 - B1/C0 stepping Graphics and Display
- device pci 03.0 off end # 8086 22b8 - Camera and Image Processor
- device pci 0b.0 on end # 8086 22dc - ?
- device pci 10.0 on end # 8086 2294 - MMC Port
- device pci 11.0 off end # 8086 0F15 - SDIO Port
- device pci 12.0 on end # 8086 0F16 - SD Port
- device pci 13.0 off end # 8086 22a3 - Sata controller
- device pci 14.0 on end # 8086 22b5 - USB XHCI - Only 1 USB controller at a time
- device pci 15.0 on end # 8086 22a8 - LP Engine Audio
- device pci 16.0 off end # 8086 22b7 - USB device
- device pci 18.0 on end # 8086 22c0 - SIO - DMA
- device pci 18.1 on end # 8086 22c1 - I2C Port 1
- device pci 18.2 on end # 8086 22c2 - I2C Port 2
- device pci 18.3 off end # 8086 22c3 - I2C Port 3
- device pci 18.4 off end # 8086 22c4 - I2C Port 4
- device pci 18.5 on end # 8086 22c5 - I2C Port 5
- device pci 18.6 on end # 8086 22c6 - I2C Port 6
- device pci 18.7 off end # 8086 22c7 - I2C Port 7
- device pci 1a.0 off end # 8086 0F18 - Trusted Execution Engine
- device pci 1b.0 on end # 8086 0F04 - HD Audio
- device pci 1c.0 on end # 8086 0000 - PCIe Root Port 1
- device pci 1c.1 off end # 8086 0000 - PCIe Root Port 2
- device pci 1c.2 on end # 8086 0000 - PCIe Root Port 3
- device pci 1c.3 off end # 8086 0000 - PCIe Root Port 4
- device pci 1e.0 on end # 8086 2286 - SIO - DMA
- device pci 1e.1 off end # 8086 0F08 - PWM 1
- device pci 1e.2 off end # 8086 0F09 - PWM 2
- device pci 1e.3 on end # 8086 228a - HSUART 1
- device pci 1e.4 off end # 8086 228c - HSUART 2
- device pci 1e.5 on end # 8086 228e - SPI 1
- device pci 1e.6 off end # 8086 2290 - SPI 2
- device pci 1e.7 off end # 8086 22ac - SPI 3
- device pci 1f.0 on # 8086 229c - LPC bridge
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- device pnp 0c09.0 on end
- end
- end # LPC Bridge
- device pci 1f.3 off end # 8086 0F12 - SMBus 0
- end
-end
diff --git a/src/mainboard/google/cyan/variants/wizpig/overridetree.cb b/src/mainboard/google/cyan/variants/wizpig/overridetree.cb
new file mode 100644
index 0000000000..5923462147
--- /dev/null
+++ b/src/mainboard/google/cyan/variants/wizpig/overridetree.cb
@@ -0,0 +1,32 @@
+chip soc/intel/braswell
+
+ register "PcdEnableI2C0" = "1" # Touchscreen
+
+ register "Usb2Port0PerPortPeTxiSet" = "7"
+ register "Usb2Port0PerPortTxiSet" = "0"
+ register "Usb2Port0IUsbTxEmphasisEn" = "2"
+ register "Usb2Port0PerPortTxPeHalf" = "1"
+ register "Usb2Port1PerPortPeTxiSet" = "7"
+ register "Usb2Port1PerPortTxiSet" = "0"
+ register "Usb2Port1IUsbTxEmphasisEn" = "2"
+ register "Usb2Port1PerPortTxPeHalf" = "1"
+ register "Usb2Port2PerPortPeTxiSet" = "7"
+ register "Usb2Port2PerPortTxiSet" = "0"
+ register "Usb2Port2IUsbTxEmphasisEn" = "2"
+ register "Usb2Port2PerPortTxPeHalf" = "1"
+ register "Usb2Port3PerPortPeTxiSet" = "7"
+ register "Usb2Port3PerPortTxiSet" = "0"
+ register "Usb2Port3IUsbTxEmphasisEn" = "2"
+ register "Usb2Port3PerPortTxPeHalf" = "1"
+ register "Usb2Port4PerPortPeTxiSet" = "7"
+ register "Usb2Port4PerPortTxiSet" = "3"
+ register "Usb2Port4IUsbTxEmphasisEn" = "2"
+ register "Usb2Port4PerPortTxPeHalf" = "1"
+
+ register "PcdPchSsicEnable" = "0"
+ register "PcdPchUsbHsicPort" = "0"
+
+ device domain 0 on
+ device pci 18.1 on end # 8086 22c1 - I2C Port 1: Touchscreen
+ end
+end