summaryrefslogtreecommitdiff
path: root/src/mainboard/google/gru/mainboard.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/google/gru/mainboard.c')
-rw-r--r--src/mainboard/google/gru/mainboard.c24
1 files changed, 24 insertions, 0 deletions
diff --git a/src/mainboard/google/gru/mainboard.c b/src/mainboard/google/gru/mainboard.c
index 7e360e7880..dd986c4348 100644
--- a/src/mainboard/google/gru/mainboard.c
+++ b/src/mainboard/google/gru/mainboard.c
@@ -15,9 +15,11 @@
*/
#include <boardid.h>
+#include <console/console.h>
#include <delay.h>
#include <device/device.h>
#include <device/i2c.h>
+#include <ec/google/chromeec/ec.h>
#include <gpio.h>
#include <soc/bl31_plat_params.h>
#include <soc/clock.h>
@@ -230,6 +232,17 @@ static void configure_display(void)
gpio_output(GPIO(4, D, 3), 1); /* CPU3_EDP_VDDEN for P3.3V_DISP */
}
+static void usb_power_cycle(int port)
+{
+ if (google_chromeec_set_usb_pd_role(port, USB_PD_CTRL_ROLE_FORCE_SINK))
+ printk(BIOS_ERR, "ERROR: Cannot force USB%d PD sink\n", port);
+
+ mdelay(10); /* Make sure USB stick is fully depowered. */
+
+ if (google_chromeec_set_usb_pd_role(port, USB_PD_CTRL_ROLE_TOGGLE_ON))
+ printk(BIOS_ERR, "ERROR: Cannot restore USB%d PD mode\n", port);
+}
+
static void setup_usb(void)
{
/* A few magic PHY tuning values that improve eye diagram amplitude
@@ -269,6 +282,17 @@ static void setup_usb(void)
setup_usb_otg0();
setup_usb_otg1();
+
+ /*
+ * Need to power-cycle USB ports for use in firmware, since some devices
+ * can't fall back to USB 2.0 after they saw SuperSpeed terminations.
+ * This takes about a dozen milliseconds, so only do it in boot modes
+ * that have firmware UI (which one could select USB boot from).
+ */
+ if (display_init_required()) {
+ usb_power_cycle(0);
+ usb_power_cycle(1);
+ }
}
static void mainboard_init(device_t dev)