summaryrefslogtreecommitdiff
path: root/src/mainboard/google/gru
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/google/gru')
-rw-r--r--src/mainboard/google/gru/Kconfig5
-rw-r--r--src/mainboard/google/gru/board.h8
-rw-r--r--src/mainboard/google/gru/bootblock.c8
-rw-r--r--src/mainboard/google/gru/mainboard.c20
-rw-r--r--src/mainboard/google/gru/pwm_regulator.c6
5 files changed, 27 insertions, 20 deletions
diff --git a/src/mainboard/google/gru/Kconfig b/src/mainboard/google/gru/Kconfig
index 5eb35d49a5..3026c7e4ec 100644
--- a/src/mainboard/google/gru/Kconfig
+++ b/src/mainboard/google/gru/Kconfig
@@ -35,6 +35,11 @@ config GRU_HAS_WLAN_RESET
default y if BOARD_GOOGLE_GRU || BOARD_GOOGLE_KEVIN || BOARD_GOOGLE_BOB
default n
+config GRU_BASEBOARD_SCARLET
+ bool
+ default y if BOARD_GOOGLE_SCARLET
+ default n
+
config BOARD_SPECIFIC_OPTIONS
def_bool y
select BOARD_ID_AUTO
diff --git a/src/mainboard/google/gru/board.h b/src/mainboard/google/gru/board.h
index f95db57e36..5722260bc9 100644
--- a/src/mainboard/google/gru/board.h
+++ b/src/mainboard/google/gru/board.h
@@ -24,15 +24,15 @@
#define GPIO_RESET GPIO(0, B, 3)
#define GPIO_SDMMC_PWR GPIO(4, D, 5)
-#if IS_ENABLED(CONFIG_BOARD_GOOGLE_SCARLET)
+#if IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)
#define GPIO_BACKLIGHT GPIO(4, C, 5)
#define GPIO_EC_IN_RW GPIO(0, A, 1)
#define GPIO_EC_IRQ GPIO(1, C, 2)
-#define GPIO_P15V_EN dead_code_t(gpio_t, "PP1500 doesn't exist on Scarlet")
-#define GPIO_P18V_AUDIO_PWREN dead_code_t(gpio_t, "doesn't exist on Scarlet")
+#define GPIO_P15V_EN dead_code_t(gpio_t, "PP1500 doesn't exist on scarlet.")
+#define GPIO_P18V_AUDIO_PWREN dead_code_t(gpio_t, "doesn't exist on scarlet.")
#define GPIO_P30V_EN GPIO(0, B, 1)
#define GPIO_SPK_PA_EN GPIO(0, A, 2)
-#define GPIO_TP_RST_L dead_code_t(gpio_t, "don't need TP_RST_L on Scarlet")
+#define GPIO_TP_RST_L dead_code_t(gpio_t, "don't need TP_RST_L on scarlet.")
#define GPIO_TPM_IRQ GPIO(1, C, 1)
#define GPIO_WP GPIO(0, B, 5)
#else
diff --git a/src/mainboard/google/gru/bootblock.c b/src/mainboard/google/gru/bootblock.c
index 162a7e51f1..a18a61c101 100644
--- a/src/mainboard/google/gru/bootblock.c
+++ b/src/mainboard/google/gru/bootblock.c
@@ -44,8 +44,8 @@ void bootblock_mainboard_early_init(void)
*/
write32(&rk3399_grf->io_vsel, RK_SETBITS(1 << 0));
- /* Scarlet gpio4cd iodomain is 1.8V */
- if (IS_ENABLED(CONFIG_BOARD_GOOGLE_SCARLET))
+ /* Scarlet-based gpio4cd iodomain is 1.8V */
+ if (IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET))
write32(&rk3399_grf->io_vsel, RK_SETBITS(1 << 3));
/* Reconfigure GPIO1 from dynamic voltage selection through GPIO0_B1 to
@@ -56,7 +56,7 @@ void bootblock_mainboard_early_init(void)
/* Enable rails powering GPIO blocks, among other things. */
gpio_output(GPIO_P30V_EN, 1);
- if (!IS_ENABLED(CONFIG_BOARD_GOOGLE_SCARLET))
+ if (!IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET))
gpio_output(GPIO_P15V_EN, 1); /* Scarlet: EC-controlled */
#if IS_ENABLED(CONFIG_DRIVERS_UART)
@@ -102,7 +102,7 @@ static void configure_tpm(void)
if (IS_ENABLED(CONFIG_GRU_HAS_TPM2)) {
rockchip_spi_init(CONFIG_DRIVER_TPM_SPI_BUS, 1500*KHz);
- if (IS_ENABLED(CONFIG_BOARD_GOOGLE_SCARLET)) {
+ if (IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)) {
gpio_input(GPIO(2, B, 1)); /* SPI2_MISO no-pull */
gpio_input(GPIO(2, B, 2)); /* SPI2_MOSI no-pull */
gpio_input(GPIO(2, B, 3)); /* SPI2_CLK no-pull */
diff --git a/src/mainboard/google/gru/mainboard.c b/src/mainboard/google/gru/mainboard.c
index 3721ce8d87..99b335a810 100644
--- a/src/mainboard/google/gru/mainboard.c
+++ b/src/mainboard/google/gru/mainboard.c
@@ -34,7 +34,8 @@
/*
* We have to drive the stronger pull-up within 1 second of powering up the
- * touchpad to prevent its firmware from falling into recovery. Not on Scarlet.
+ * touchpad to prevent its firmware from falling into recovery. Not on
+ * Scarlet-based boards.
*/
static void configure_touchpad(void)
{
@@ -90,9 +91,10 @@ static void register_gpio_suspend(void)
* with highest voltage first.
* Since register_bl31() appends to the front of the list, we need to
* register them backwards, with 1.5V coming first.
- * 1.5V and 1.8V are EC-controlled on Scarlet, so we skip them.
+ * 1.5V and 1.8V are EC-controlled on Scarlet derivatives,
+ * so we skip them.
*/
- if (!IS_ENABLED(CONFIG_BOARD_GOOGLE_SCARLET)) {
+ if (!IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)) {
static struct bl31_gpio_param param_p15_en = {
.h = { .type = PARAM_SUSPEND_GPIO },
.gpio = { .polarity = BL31_GPIO_LEVEL_LOW },
@@ -159,7 +161,7 @@ static void configure_sdmmc(void)
gpio_output(GPIO(2, A, 2), 1); /* SDMMC_SDIO_PWR_EN */
/* set SDMMC_DET_L pin */
- if (IS_ENABLED(CONFIG_BOARD_GOOGLE_SCARLET))
+ if (IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET))
/*
* do not have external pull up, so need to
* set this pin internal pull up
@@ -170,10 +172,10 @@ static void configure_sdmmc(void)
/*
* Keep sd card io domain 3v
- * In Scarlet this GPIO set to high will get 3v,
+ * In Scarlet derivatives, this GPIO set to high will get 3v,
* With other board variants setting this GPIO low results in 3V.
*/
- if (IS_ENABLED(CONFIG_BOARD_GOOGLE_SCARLET))
+ if (IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET))
gpio_output(GPIO(2, D, 4), 1);
else
gpio_output(GPIO(2, D, 4), 0);
@@ -226,7 +228,7 @@ static void configure_codec(void)
/* AUDIO IO domain 1.8V voltage selection */
write32(&rk3399_grf->io_vsel, RK_SETBITS(1 << 1));
- if (!IS_ENABLED(CONFIG_BOARD_GOOGLE_SCARLET))
+ if (!IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET))
gpio_output(GPIO_P18V_AUDIO_PWREN, 1);
gpio_output(GPIO_SPK_PA_EN, 0);
@@ -235,7 +237,7 @@ static void configure_codec(void)
static void configure_display(void)
{
- if (IS_ENABLED(CONFIG_BOARD_GOOGLE_SCARLET)) {
+ if (IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)) {
gpio_output(GPIO(4, D, 1), 0); /* DISPLAY_RST_L */
gpio_output(GPIO(4, D, 3), 1); /* PPVARP_LCD */
mdelay(10);
@@ -340,7 +342,7 @@ static void mainboard_init(device_t dev)
setup_usb(0);
if (IS_ENABLED(CONFIG_GRU_HAS_WLAN_RESET))
assert_wifi_reset();
- if (!IS_ENABLED(CONFIG_BOARD_GOOGLE_SCARLET)) {
+ if (!IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)) {
configure_touchpad(); /* Scarlet: works differently */
setup_usb(1); /* Scarlet: only one USB port */
}
diff --git a/src/mainboard/google/gru/pwm_regulator.c b/src/mainboard/google/gru/pwm_regulator.c
index 6a9f1714e8..3ea37cfebf 100644
--- a/src/mainboard/google/gru/pwm_regulator.c
+++ b/src/mainboard/google/gru/pwm_regulator.c
@@ -48,7 +48,7 @@ int pwm_design_voltage[][2] = {
[PWM_REGULATOR_CENTERLOG] = {7994, 10499}
};
-/* Applies for Scarlet */
+/* Applies for Scarlet-based boards. */
int scarlet_pwm_design_voltage[][2] = {
[PWM_REGULATOR_GPU] = {7996, 10990},
[PWM_REGULATOR_BIG] = {8000, 12992},
@@ -63,7 +63,7 @@ int pwm_enum_to_pwm_number[] = {
#else
[PWM_REGULATOR_CENTERLOG] = -1,
#endif
-#if IS_ENABLED(CONFIG_BOARD_GOOGLE_SCARLET)
+#if IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)
[PWM_REGULATOR_BIG] = 3,
#else
[PWM_REGULATOR_BIG] = 1,
@@ -85,7 +85,7 @@ void pwm_regulator_configure(enum pwm_regulator pwm, int millivolt)
} else if (IS_ENABLED(CONFIG_BOARD_GOOGLE_KEVIN) && board_id() >= 6) {
voltage_min = kevin6_pwm_design_voltage[pwm][0];
voltage_max = kevin6_pwm_design_voltage[pwm][1];
- } else if (IS_ENABLED(CONFIG_BOARD_GOOGLE_SCARLET)) {
+ } else if (IS_ENABLED(CONFIG_GRU_BASEBOARD_SCARLET)) {
voltage_min = scarlet_pwm_design_voltage[pwm][0];
voltage_max = scarlet_pwm_design_voltage[pwm][1];
}