diff options
Diffstat (limited to 'src/mainboard/google/hatch/variants/helios_diskswap/overridetree.cb')
-rw-r--r-- | src/mainboard/google/hatch/variants/helios_diskswap/overridetree.cb | 209 |
1 files changed, 209 insertions, 0 deletions
diff --git a/src/mainboard/google/hatch/variants/helios_diskswap/overridetree.cb b/src/mainboard/google/hatch/variants/helios_diskswap/overridetree.cb new file mode 100644 index 0000000000..3bbf232a93 --- /dev/null +++ b/src/mainboard/google/hatch/variants/helios_diskswap/overridetree.cb @@ -0,0 +1,209 @@ +chip soc/intel/cannonlake + register "tdp_pl1_override" = "13" + register "tdp_pl2_override" = "64" + + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + [PchSerialIoIndexSPI0] = PchSerialIoPci, + [PchSerialIoIndexSPI1] = PchSerialIoPci, + [PchSerialIoIndexSPI2] = PchSerialIoDisabled, + [PchSerialIoIndexUART0] = PchSerialIoSkipInit, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + # Enable Root port 9(x2) for NVMe. + register "PcieRpEnable[8]" = "1" + register "PcieRpLtrEnable[8]" = "1" + # RP 9 uses CLK SRC 1 + register "PcieClkSrcUsage[1]" = "8" + # ClkReq-to-ClkSrc mapping for CLK SRC 1 + register "PcieClkSrcClkReq[1]" = "1" + + # Enable Root port 11(x2) for NVMe. + register "PcieRpEnable[10]" = "1" + register "PcieRpLtrEnable[10]" = "1" + # RP 11 uses CLK SRC 2 + register "PcieClkSrcUsage[2]" = "10" + # ClkReq-to-ClkSrc mapping for CLK SRC 2 + register "PcieClkSrcClkReq[2]" = "1" + + # No PCIe WiFi + register "PcieRpEnable[13]" = "0" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI1 | FP MCU | + #| I2C0 | Trackpad | + #| I2C1 | Touchscreen | + #| I2C4 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 50, + .fall_time_ns = 15, + .data_hold_time_ns = 330, + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 25, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 150, + .fall_time_ns = 150, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 120, + .fall_time_ns = 120, + }, + .gspi[0] = { + .speed_mhz = 1, + .early_init = 1, + }, + }" + + device domain 0 on + device pci 14.0 on + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + # No Type-A port + device usb 2.2 off end + end + chip drivers/usb/acpi + # No Type-A Port + device usb 2.3 off end + end + chip drivers/usb/acpi + # No WWAN + device usb 2.5 off end + end + chip drivers/usb/acpi + # No WWAN + device usb 3.4 off end + end + end + end + end + + # Native SD Card interface unused + device pci 14.5 off end + + device pci 15.0 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_A21_IRQ)" + register "wake" = "GPE0_DW0_21" + device i2c 15 on end + end + end + + device pci 15.1 on + chip drivers/i2c/hid + register "generic.hid" = ""GDIX0000"" + register "generic.desc" = ""Goodix Touchscreen"" + register "generic.irq" = + "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)" + register "generic.reset_delay_ms" = "500" + register "generic.reset_off_delay_ms" = "1" + register "generic.enable_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)" + register "generic.enable_delay_ms" = "10" + register "generic.enable_off_delay_ms" = "1" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 5d on end + end + chip drivers/generic/gpio_keys + register "name" = ""PENH"" + register "gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A8)" + register "key.wake" = "GPE0_DW0_08" + register "key.wakeup_event_action" = "EV_ACT_ASSERTED" + register "key.dev_name" = ""EJCT"" + register "key.linux_code" = "SW_PEN_INSERTED" + register "key.linux_input_type" = "EV_SW" + register "key.label" = ""pen_eject"" + device generic 0 on end + end + end # I2C 1 + + # I2C #2 unused + device pci 15.2 off end + + # I2C #3 unused + device pci 15.3 off end + + device pci 19.0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" + register "property_count" = "1" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + chip drivers/i2c/generic + register "hid" = ""10EC1011"" + register "desc" = ""RT1011 Tweeter Left Speaker Amp"" + register "uid" = "0" + register "name" = ""TL"" + device i2c 38 on end + end + chip drivers/i2c/generic + register "hid" = ""10EC1011"" + register "desc" = ""RT1011 Tweeter Right Speaker Amp"" + register "uid" = "1" + register "name" = ""TR"" + device i2c 39 on end + end + chip drivers/i2c/generic + register "hid" = ""10EC1011"" + register "desc" = ""RT1011 Woofer Left Speaker Amp"" + register "uid" = "2" + register "name" = ""WL"" + device i2c 3a on end + end + chip drivers/i2c/generic + register "hid" = ""10EC1011"" + register "desc" = ""RT1011 Woofer Right Speaker Amp"" + register "uid" = "3" + register "name" = ""WR"" + device i2c 3b on end + end + end #I2C #4 + + device pci 1d.0 on end # PCI Express Port 9 (X2 NVMe) + device pci 1d.2 on end # PCI Express Port 11 (X2 NVMe) + + device pci 1e.3 on + chip drivers/spi/acpi + register "name" = ""CRFP"" + register "hid" = "ACPI_DT_NAMESPACE_HID" + register "uid" = "1" + register "compat_string" = ""google,cros-ec-spi"" + register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_A23_IRQ)" + register "wake" = "GPE0_DW0_23" + device spi 1 on end + end # FPMCU + end # GSPI #1 + end +end |