diff options
Diffstat (limited to 'src/mainboard/google/hatch/variants/palkia/overridetree.cb')
-rw-r--r-- | src/mainboard/google/hatch/variants/palkia/overridetree.cb | 192 |
1 files changed, 192 insertions, 0 deletions
diff --git a/src/mainboard/google/hatch/variants/palkia/overridetree.cb b/src/mainboard/google/hatch/variants/palkia/overridetree.cb new file mode 100644 index 0000000000..0792b9607d --- /dev/null +++ b/src/mainboard/google/hatch/variants/palkia/overridetree.cb @@ -0,0 +1,192 @@ +chip soc/intel/cannonlake + register "tdp_pl1_override" = "15" + register "tdp_pl2_override" = "64" + + register "SerialIoDevMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, + [PchSerialIoIndexI2C4] = PchSerialIoPci, + [PchSerialIoIndexSPI0] = PchSerialIoPci, + [PchSerialIoIndexSPI2] = PchSerialIoDisabled, + [PchSerialIoIndexUART0] = PchSerialIoSkipInit, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + register "usb2_ports[2]" = "USB2_PORT_LONG(OC_SKIP)" # SD CARD + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # SD CARD + + # No PCIe WiFi + register "PcieRpEnable[13]" = "0" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| I2C0 | Trackpad | + #| I2C1 | Touchscreen | + #| I2C2 | 2nd Touchscreen | + #| I2C4 | Audio | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .i2c[0] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 50, + .fall_time_ns = 15, + .data_hold_time_ns = 330, + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 25, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 60, + .fall_time_ns = 25, + }, + .i2c[4] = { + .speed = I2C_SPEED_FAST, + .rise_time_ns = 120, + .fall_time_ns = 120, + }, + }" + + device domain 0 on + device pci 14.0 on + chip drivers/usb/acpi + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""Micro SD Card"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.2 on end + end + chip drivers/usb/acpi + register "desc" = ""Left Type-A Port"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 2.3 on end + end + chip drivers/usb/acpi + # No WWAN + device usb 2.5 off end + end + chip drivers/usb/acpi + # No Right Tpype-C port + device usb 3.1 off end + end + chip drivers/usb/acpi + register "desc" = ""Micro SD card"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 3.2 on end + end + chip drivers/usb/acpi + register "desc" = ""Left Type-A Port 1"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(1, 2)" + device usb 3.3 on end + end + end + end + end + + # Native SD Card interface unused + device pci 14.5 off end + + device pci 15.0 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_EDGE_LOW(GPP_A21_IRQ)" + register "wake" = "GPE0_DW0_21" + device i2c 15 on end + end + end + + device pci 15.1 on + chip drivers/i2c/hid + register "generic.hid" = ""ELAN9008"" + register "generic.desc" = ""ELAN Touchscreen USI"" + register "generic.irq" = + "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)" + register "generic.probed" = "1" + register "generic.enable_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)" + register "generic.enable_delay_ms" = "12" + register "generic.enable_off_delay_ms" = "10" + register "generic.has_power_resource" = "1" + register "generic.stop_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C4)" + register "generic.stop_delay_ms" = "15" + register "generic.stop_off_delay_ms" = "5" + register "hid_desc_reg_offset" = "0x01" + device i2c 10 on end + end + end # I2C 1 + + device pci 15.2 on + chip drivers/i2c/hid + register "generic.hid" = ""ELAN9009"" + register "generic.desc" = ""ELAN Touchscreen USI"" + register "generic.irq" = + "ACPI_IRQ_EDGE_LOW(GPP_C7_IRQ)" + register "generic.probed" = "1" + register "generic.enable_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_D9)" + register "generic.enable_delay_ms" = "12" + register "generic.enable_off_delay_ms" = "10" + register "generic.has_power_resource" = "1" + register "generic.stop_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C4)" + register "generic.stop_delay_ms" = "15" + register "generic.stop_off_delay_ms" = "5" + register "hid_desc_reg_offset" = "0x01" + device i2c 10 on end + end + end #I2C 2 + + # I2C #3 unused + device pci 15.3 off end + + device pci 19.0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Realtek RT5682"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)" + register "property_count" = "1" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + chip drivers/i2c/generic + register "hid" = ""10EC1011"" + register "desc" = ""RT1011 Tweeter Left Speaker Amp"" + register "uid" = "0" + register "name" = ""TL"" + device i2c 38 on end + end + chip drivers/i2c/generic + register "hid" = ""10EC1011"" + register "desc" = ""RT1011 Tweeter Right Speaker Amp"" + register "uid" = "1" + register "name" = ""TR"" + device i2c 39 on end + end + end #I2C #4 + # GSPI #1 unused + device pci 1e.3 off end + + device pci 1f.3 on + chip drivers/generic/max98357a + register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H3)" + register "sdmode_delay" = "5" + device generic 0 on end + end + end # Intel I2S + end +end |