summaryrefslogtreecommitdiff
path: root/src/mainboard/google/reef
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/google/reef')
-rw-r--r--src/mainboard/google/reef/variants/baseboard/devicetree.cb10
-rw-r--r--src/mainboard/google/reef/variants/pyro/devicetree.cb10
-rw-r--r--src/mainboard/google/reef/variants/snappy/devicetree.cb12
3 files changed, 16 insertions, 16 deletions
diff --git a/src/mainboard/google/reef/variants/baseboard/devicetree.cb b/src/mainboard/google/reef/variants/baseboard/devicetree.cb
index 6e51838ecd..b0c82e2be8 100644
--- a/src/mainboard/google/reef/variants/baseboard/devicetree.cb
+++ b/src/mainboard/google/reef/variants/baseboard/devicetree.cb
@@ -146,7 +146,7 @@ chip soc/intel/apollolake
device pci 15.1 off end # - XDCI
device pci 16.0 on # - I2C 0
chip drivers/i2c/da7219
- register "irq" = "IRQ_LEVEL_LOW(GPIO_116_IRQ)"
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_116_IRQ)"
register "btn_cfg" = "50"
register "mic_det_thr" = "500"
register "jack_ins_deb" = "20"
@@ -167,7 +167,7 @@ chip soc/intel/apollolake
device pci 16.2 on
chip drivers/i2c/tpm
register "hid" = ""GOOG0005""
- register "irq" = "IRQ_EDGE_LOW(GPIO_28_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_28_IRQ)"
device i2c 50 on end
end
end # - I2C 2
@@ -175,7 +175,7 @@ chip soc/intel/apollolake
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
- register "irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_21_IRQ)"
register "probed" = "1"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_36)"
register "reset_delay_ms" = "20"
@@ -189,7 +189,7 @@ chip soc/intel/apollolake
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
- register "irq" = "IRQ_EDGE_LOW(GPIO_18_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_18_IRQ)"
register "wake" = "GPE0_DW1_15"
register "probed" = "1"
device i2c 15 on end
@@ -199,7 +199,7 @@ chip soc/intel/apollolake
chip drivers/i2c/hid
register "generic.hid" = ""WCOM50C1""
register "generic.desc" = ""WCOM Digitizer""
- register "generic.irq" = "IRQ_LEVEL_LOW(GPIO_13_IRQ)"
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_13_IRQ)"
register "hid_desc_reg_offset" = "0x1"
device i2c 0x9 on end
end
diff --git a/src/mainboard/google/reef/variants/pyro/devicetree.cb b/src/mainboard/google/reef/variants/pyro/devicetree.cb
index a01fa04d35..808ed2c4e7 100644
--- a/src/mainboard/google/reef/variants/pyro/devicetree.cb
+++ b/src/mainboard/google/reef/variants/pyro/devicetree.cb
@@ -155,7 +155,7 @@ chip soc/intel/apollolake
device pci 15.1 off end # - XDCI
device pci 16.0 on # - I2C 0
chip drivers/i2c/da7219
- register "irq" = "IRQ_LEVEL_LOW(GPIO_116_IRQ)"
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_116_IRQ)"
register "btn_cfg" = "50"
register "mic_det_thr" = "500"
register "jack_ins_deb" = "20"
@@ -176,7 +176,7 @@ chip soc/intel/apollolake
device pci 16.2 on
chip drivers/i2c/tpm
register "hid" = ""GOOG0005""
- register "irq" = "IRQ_EDGE_LOW(GPIO_28_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_28_IRQ)"
device i2c 50 on end
end
end # - I2C 2
@@ -184,7 +184,7 @@ chip soc/intel/apollolake
chip drivers/i2c/hid
register "generic.hid" = ""WCOMNTN2""
register "generic.desc" = ""WCOM Touchscreen""
- register "generic.irq" = "IRQ_LEVEL_LOW(GPIO_21_IRQ)"
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_21_IRQ)"
register "generic.probed" = "1"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_36)"
register "generic.reset_delay_ms" = "20"
@@ -198,7 +198,7 @@ chip soc/intel/apollolake
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
- register "irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_21_IRQ)"
register "probed" = "1"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_36)"
register "reset_delay_ms" = "20"
@@ -212,7 +212,7 @@ chip soc/intel/apollolake
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
- register "irq" = "IRQ_EDGE_LOW(GPIO_18_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_18_IRQ)"
register "wake" = "GPE0_DW1_15"
register "probed" = "1"
device i2c 15 on end
diff --git a/src/mainboard/google/reef/variants/snappy/devicetree.cb b/src/mainboard/google/reef/variants/snappy/devicetree.cb
index 8d9d307228..6d1c9ef145 100644
--- a/src/mainboard/google/reef/variants/snappy/devicetree.cb
+++ b/src/mainboard/google/reef/variants/snappy/devicetree.cb
@@ -146,7 +146,7 @@ chip soc/intel/apollolake
device pci 15.1 off end # - XDCI
device pci 16.0 on # - I2C 0
chip drivers/i2c/da7219
- register "irq" = "IRQ_LEVEL_LOW(GPIO_116_IRQ)"
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_116_IRQ)"
register "btn_cfg" = "50"
register "mic_det_thr" = "500"
register "jack_ins_deb" = "20"
@@ -167,7 +167,7 @@ chip soc/intel/apollolake
device pci 16.2 on
chip drivers/i2c/tpm
register "hid" = ""GOOG0005""
- register "irq" = "IRQ_EDGE_LOW(GPIO_28_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_28_IRQ)"
device i2c 50 on end
end
end # - I2C 2
@@ -175,7 +175,7 @@ chip soc/intel/apollolake
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
- register "irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_21_IRQ)"
register "probed" = "1"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_36)"
register "reset_delay_ms" = "20"
@@ -187,7 +187,7 @@ chip soc/intel/apollolake
chip drivers/i2c/hid
register "generic.hid" = ""WDHT0001""
register "generic.desc" = ""WDT Touchscreen""
- register "generic.irq" = "IRQ_EDGE_LOW(GPIO_21_IRQ)"
+ register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPIO_21_IRQ)"
register "generic.probed" = "1"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_36)"
register "generic.reset_delay_ms" = "20"
@@ -203,7 +203,7 @@ chip soc/intel/apollolake
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
- register "irq" = "IRQ_EDGE_LOW(GPIO_18_IRQ)"
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPIO_18_IRQ)"
register "wake" = "GPE0_DW1_15"
register "probed" = "1"
device i2c 15 on end
@@ -213,7 +213,7 @@ chip soc/intel/apollolake
chip drivers/i2c/hid
register "generic.hid" = ""WCOM50C1""
register "generic.desc" = ""WCOM Digitizer""
- register "generic.irq" = "IRQ_LEVEL_LOW(GPIO_13_IRQ)"
+ register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_13_IRQ)"
register "hid_desc_reg_offset" = "0x1"
device i2c 0x9 on end
end