1 files changed, 90 insertions, 0 deletions
diff --git a/src/mainboard/google/rush/bootblock.c b/src/mainboard/google/rush/bootblock.c
new file mode 100644
index 0000000000..51fe9b3e99
--- /dev/null
+++ b/src/mainboard/google/rush/bootblock.c
@@ -0,0 +1,90 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2014 Google Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/io.h>
+#include <bootblock_common.h>
+#include <console/console.h>
+#include <device/i2c.h>
+#include <soc/addressmap.h>
+#include <soc/clock.h>
+#include <soc/nvidia/tegra/i2c.h>
+#include <soc/nvidia/tegra132/clk_rst.h>
+#include <soc/nvidia/tegra132/gpio.h>
+#include <soc/nvidia/tegra132/pinmux.h>
+#include <soc/nvidia/tegra132/spi.h>	/* FIXME: move back to soc code? */
+
+#include "pmic.h"
+
+static struct clk_rst_ctlr *clk_rst = (void *)TEGRA_CLK_RST_BASE;
+
+static void set_clock_sources(void)
+{
+	/* UARTA gets PLLP, deactivate CLK_UART_DIV_OVERRIDE */
+	writel(PLLP << CLK_SOURCE_SHIFT, &clk_rst->clk_src_uarta);
+
+	clock_configure_source(mselect, PLLP, 102000);
+
+	/* The PMIC is on I2C5 and can run at 400 KHz. */
+	clock_configure_i2c_scl_freq(i2c5, PLLP, 400);
+
+	/* TODO: We should be able to set this to 50MHz, but that did not seem
+	 * reliable. */
+	clock_configure_source(sbc4, PLLP, 33333);
+}
+
+void bootblock_mainboard_init(void)
+{
+	set_clock_sources();
+
+	clock_enable_clear_reset(CLK_L_CACHE2 | CLK_L_TMR,
+				 CLK_H_I2C5 | CLK_H_APBDMA,
+				 0, CLK_V_MSELECT, 0, 0);
+
+	// Board ID GPIOs, bits 0-3.
+	gpio_input(GPIO(Q3));
+	gpio_input(GPIO(T1));
+	gpio_input(GPIO(X1));
+	gpio_input(GPIO(X4));
+
+	// I2C5 (PMU) clock.
+	pinmux_set_config(PINMUX_PWR_I2C_SCL_INDEX,
+			  PINMUX_PWR_I2C_SCL_FUNC_I2CPMU | PINMUX_INPUT_ENABLE);
+	// I2C5 (PMU) data.
+	pinmux_set_config(PINMUX_PWR_I2C_SDA_INDEX,
+			  PINMUX_PWR_I2C_SDA_FUNC_I2CPMU | PINMUX_INPUT_ENABLE);
+	i2c_init(4);
+	pmic_init(4);
+
+	/* SPI4 data out (MOSI) */
+	pinmux_set_config(PINMUX_GPIO_PG6_INDEX,
+			  PINMUX_GPIO_PG6_FUNC_SPI4 | PINMUX_INPUT_ENABLE |
+			  PINMUX_PULL_UP);
+	/* SPI4 data in (MISO) */
+	pinmux_set_config(PINMUX_GPIO_PG7_INDEX,
+			  PINMUX_GPIO_PG7_FUNC_SPI4 | PINMUX_INPUT_ENABLE |
+			  PINMUX_PULL_UP);
+	/* SPI4 clock */
+	pinmux_set_config(PINMUX_GPIO_PG5_INDEX,
+			  PINMUX_GPIO_PG5_FUNC_SPI4 | PINMUX_INPUT_ENABLE);
+	/* SPI4 chip select 0 */
+	pinmux_set_config(PINMUX_GPIO_PI3_INDEX,
+			  PINMUX_GPIO_PI3_FUNC_SPI4 | PINMUX_INPUT_ENABLE);
+
+	tegra_spi_init(4);
+}