summaryrefslogtreecommitdiff
path: root/src/mainboard/google/slippy/devicetree.cb
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/google/slippy/devicetree.cb')
-rw-r--r--src/mainboard/google/slippy/devicetree.cb116
1 files changed, 0 insertions, 116 deletions
diff --git a/src/mainboard/google/slippy/devicetree.cb b/src/mainboard/google/slippy/devicetree.cb
deleted file mode 100644
index 3d4c8c5068..0000000000
--- a/src/mainboard/google/slippy/devicetree.cb
+++ /dev/null
@@ -1,116 +0,0 @@
-chip northbridge/intel/haswell
- # IGD Displays
- register "gfx.ndid" = "3"
- register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }"
-
- # Enable eDP Hotplug with 6ms pulse
- register "gpu_dp_d_hotplug" = "0x06"
-
- # Disable DisplayPort C Hotplug
- register "gpu_dp_c_hotplug" = "0x00"
-
- # Enable HDMI Hotplug with 6ms pulse
- register "gpu_dp_b_hotplug" = "0x06"
-
- # Set backlight PWM values for eDP
- register "gpu_cpu_backlight" = "0x00000200"
- register "gpu_pch_backlight" = "0x04000000"
-
- # Enable Panel and configure power delays
- register "gpu_panel_port_select" = "1" # eDP
- register "gpu_panel_power_cycle_delay" = "5" # 400ms
- register "gpu_panel_power_up_delay" = "400" # 40ms
- register "gpu_panel_power_down_delay" = "150" # 15ms
- register "gpu_panel_power_backlight_on_delay" = "2100" # 210ms
- register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms
-
- device cpu_cluster 0 on
- chip cpu/intel/haswell
- device lapic 0 on end
- # Magic APIC ID to locate this chip
- device lapic 0xACAC off end
-
- register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E)
- register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3)
- register "c3_battery" = "9" # ACPI(C3) = MWAIT(C7S)
-
- register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E)
- register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3)
- register "c3_acpower" = "9" # ACPI(C3) = MWAIT(C7S)
- end
- end
-
- device domain 0 on
- device pci 00.0 on end # host bridge
- device pci 02.0 on end # vga controller
- device pci 03.0 on end # mini-hd audio
-
- chip southbridge/intel/lynxpoint
- register "pirqa_routing" = "0x8b"
- register "pirqb_routing" = "0x8a"
- register "pirqc_routing" = "0x8b"
- register "pirqd_routing" = "0x8b"
- register "pirqe_routing" = "0x80"
- register "pirqf_routing" = "0x80"
- register "pirqg_routing" = "0x80"
- register "pirqh_routing" = "0x80"
-
- # EC range is 0x800-0x9ff
- register "gen1_dec" = "0x00fc0801"
- register "gen2_dec" = "0x00fc0901"
-
- # EC_SMI is GPIO34
- register "alt_gp_smi_en" = "0x0004"
- register "gpe0_en_1" = "0x00000000"
- # EC_SCI is GPIO36
- register "gpe0_en_2" = "0x00000010"
- register "gpe0_en_3" = "0x00000000"
- register "gpe0_en_4" = "0x00000000"
-
- register "ide_legacy_combined" = "0x0"
- register "sata_ahci" = "0x1"
- register "sata_port_map" = "0x1"
-
- register "sio_acpi_mode" = "0"
- register "sio_i2c0_voltage" = "0" # 3.3V
- register "sio_i2c1_voltage" = "0" # 3.3V
-
- device pci 13.0 off end # Smart Sound Audio DSP
- device pci 14.0 on end # USB3 XHCI
- device pci 15.0 on end # Serial I/O DMA
- device pci 15.1 on end # I2C0
- device pci 15.2 on end # I2C1
- device pci 15.3 off end # GSPI0
- device pci 15.4 off end # GSPI1
- device pci 15.5 off end # UART0
- device pci 15.6 off end # UART1
- device pci 16.0 on end # Management Engine Interface 1
- device pci 16.1 off end # Management Engine Interface 2
- device pci 16.2 off end # Management Engine IDE-R
- device pci 16.3 off end # Management Engine KT
- device pci 17.0 off end # SDIO
- device pci 19.0 off end # GbE
- device pci 1b.0 on end # High Definition Audio
- device pci 1c.0 on end # PCIe Port #1
- device pci 1c.1 off end # PCIe Port #2
- device pci 1c.2 off end # PCIe Port #3
- device pci 1c.3 off end # PCIe Port #4
- device pci 1c.4 off end # PCIe Port #5
- device pci 1c.5 off end # PCIe Port #6
- device pci 1d.0 on end # USB2 EHCI
- device pci 1e.0 off end # PCI bridge
- device pci 1f.0 on
- chip ec/google/chromeec
- # We only have one init function that
- # we need to call to initialize the
- # keyboard part of the EC.
- device pnp ff.1 on # dummy address
- end
- end
- end # LPC bridge
- device pci 1f.2 on end # SATA Controller
- device pci 1f.3 on end # SMBus
- device pci 1f.6 on end # Thermal
- end
- end
-end