diff options
Diffstat (limited to 'src/mainboard/google/volteer/variants/lindar/overridetree.cb')
| -rw-r--r-- | src/mainboard/google/volteer/variants/lindar/overridetree.cb | 79 |
1 files changed, 78 insertions, 1 deletions
diff --git a/src/mainboard/google/volteer/variants/lindar/overridetree.cb b/src/mainboard/google/volteer/variants/lindar/overridetree.cb index 32204c58e7..6f14622ecf 100644 --- a/src/mainboard/google/volteer/variants/lindar/overridetree.cb +++ b/src/mainboard/google/volteer/variants/lindar/overridetree.cb @@ -1,6 +1,83 @@ chip soc/intel/tigerlake + # USB Port Config + register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port A0 + register "usb2_ports[1]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used + register "usb2_ports[2]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used + register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Type-A / Type-C C1 + register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Camera + register "usb2_ports[5]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used + register "usb2_ports[6]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used + register "usb2_ports[7]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used + register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # Type-A / Type-C C0 + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # M.2 Bluetooth + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC1)" # USB3/2 Type A port A0 + register "usb3_ports[1]" = "USB3_PORT_EMPTY" # Type-A / Type-C Not Used + register "usb3_ports[2]" = "USB3_PORT_EMPTY" # Type-A / Type-C Not Used + register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Type-A / Type-C Not Used + + register "SaGv" = "SaGv_Disabled" + # I2C Port Config + register "SerialIoI2cMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoDisabled, + [PchSerialIoIndexI2C3] = PchSerialIoDisabled, + [PchSerialIoIndexI2C4] = PchSerialIoDisabled, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + }" device domain 0 on + device pci 07.0 off end # TBT_PCIe0 0x9A23 + device pci 07.1 off end # TBT_PCIe1 0x9A25 + device pci 07.2 off end # TBT_PCIe2 0x9A27 + device pci 07.3 off end # TBT_PCIe3 0x9A29 + device pci 15.0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Headset Codec"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_F8)" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_count" = "1" + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on end + end + end # I2C0 + device pci 15.1 on + chip drivers/i2c/hid + register "generic.hid" = ""GDIX0000"" + register "generic.desc" = ""Goodix Touchscreen"" + register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" + # Parameter T3 >= 10ms + register "generic.reset_delay_ms" = "120" + # Parameter T2 >= 1ms + register "generic.reset_off_delay_ms" = "3" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" + # Parameter T1 >= 10ms + register "generic.enable_delay_ms" = "12" + register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E3)" + # Parameter T4 >= 1ms + register "generic.stop_off_delay_ms" = "1" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 14 on end + end + end # I2C1 + device pci 15.2 off end # I2C2 0xA0EA + device pci 19.1 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)" + register "wake" = "GPE0_DW2_15" + register "probed" = "1" + device i2c 15 on end + end + end # I2C5 0xA0C6 end - end |