diff options
Diffstat (limited to 'src/mainboard/google/volteer/variants/volteer2/overridetree.cb')
| -rw-r--r-- | src/mainboard/google/volteer/variants/volteer2/overridetree.cb | 165 |
1 files changed, 165 insertions, 0 deletions
diff --git a/src/mainboard/google/volteer/variants/volteer2/overridetree.cb b/src/mainboard/google/volteer/variants/volteer2/overridetree.cb new file mode 100644 index 0000000000..24b869ced9 --- /dev/null +++ b/src/mainboard/google/volteer/variants/volteer2/overridetree.cb @@ -0,0 +1,165 @@ +chip soc/intel/tigerlake + device domain 0 on + device pci 15.0 on + chip drivers/i2c/generic + register "hid" = ""10EC5682"" + register "name" = ""RT58"" + register "desc" = ""Headset Codec"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_F8)" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_count" = "1" + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on + probe AUDIO MAX98357_ALC5682I_I2S + probe AUDIO MAX98373_ALC5682I_I2S + end + end + chip drivers/i2c/max98373 + register "vmon_slot_no" = "0" + register "imon_slot_no" = "1" + register "uid" = "0" + register "desc" = ""Right Speaker Amp"" + register "name" = ""MAXR"" + device i2c 31 on + probe AUDIO MAX98373_ALC5682I_I2S + end + end + chip drivers/i2c/max98373 + register "vmon_slot_no" = "2" + register "imon_slot_no" = "3" + register "uid" = "1" + register "desc" = ""Left Speaker Amp"" + register "name" = ""MAXL"" + device i2c 32 on + probe AUDIO MAX98373_ALC5682I_I2S + end + end + end + device pci 15.1 on + chip drivers/i2c/hid + register "generic.hid" = ""GDIX0000"" + register "generic.desc" = ""Goodix Touchscreen"" + register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" + register "generic.reset_delay_ms" = "120" + register "generic.reset_off_delay_ms" = "3" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" + register "generic.enable_delay_ms" = "12" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 14 on end + end + chip drivers/i2c/hid + register "generic.hid" = ""ELAN90FC"" + register "generic.desc" = ""ELAN Touchscreen"" + register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" + register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" + register "generic.reset_delay_ms" = "20" + register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 10 on end + end + end # I2C1 0xA0E9 + device pci 15.2 on + chip drivers/i2c/sx9310 + register "desc" = ""SAR0 Proximity Sensor"" + register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" + register "speed" = "I2C_SPEED_FAST" + register "uid" = "0" + register "reg_prox_ctrl0" = "0x10" + register "reg_prox_ctrl1" = "0x00" + register "reg_prox_ctrl2" = "0x84" + register "reg_prox_ctrl3" = "0x0e" + register "reg_prox_ctrl4" = "0x07" + register "reg_prox_ctrl5" = "0xc6" + register "reg_prox_ctrl6" = "0x20" + register "reg_prox_ctrl7" = "0x0d" + register "reg_prox_ctrl8" = "0x8d" + register "reg_prox_ctrl9" = "0x43" + register "reg_prox_ctrl10" = "0x1f" + register "reg_prox_ctrl11" = "0x00" + register "reg_prox_ctrl12" = "0x00" + register "reg_prox_ctrl13" = "0x00" + register "reg_prox_ctrl14" = "0x00" + register "reg_prox_ctrl15" = "0x00" + register "reg_prox_ctrl16" = "0x00" + register "reg_prox_ctrl17" = "0x00" + register "reg_prox_ctrl18" = "0x00" + register "reg_prox_ctrl19" = "0x00" + register "reg_sar_ctrl0" = "0x50" + register "reg_sar_ctrl1" = "0x8a" + register "reg_sar_ctrl2" = "0x3c" + device i2c 28 on end + end + end # I2C2 0xA0EA + device pci 19.1 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)" + register "wake" = "GPE0_DW2_15" + register "probed" = "1" + device i2c 15 on end + end + end # I2C5 0xA0C6 + device pci 1f.3 on + chip drivers/generic/max98357a + register "hid" = ""MX98357A"" + register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)" + register "sdmode_delay" = "5" + device generic 0 on + probe AUDIO MAX98357_ALC5682I_I2S + end + end + chip drivers/intel/soundwire + device generic 0 on + probe AUDIO MAX98373_ALC5682_SNDW + chip drivers/soundwire/alc5682 + # SoundWire Link 0 ID 1 + register "desc" = ""Headset Codec"" + device generic 0.1 on end + end + chip drivers/soundwire/max98373 + # SoundWire Link 1 ID 3 + register "desc" = ""Left Speaker Amp"" + device generic 1.3 on end + end + chip drivers/soundwire/max98373 + # SoundWire Link 1 ID 7 + register "desc" = ""Right Speaker Amp"" + device generic 1.7 on end + end + end + end + end + device pci 1f.2 hidden + # The pmc_mux chip driver is a placeholder for the + # PMC.MUX device in the ACPI hierarchy. + chip drivers/intel/pmc_mux + device generic 0 on + chip drivers/intel/pmc_mux/con + register "usb2_port_number" = "9" + register "usb3_port_number" = "1" + # SBU & HSL follow CC + device generic 0 on end + end + chip drivers/intel/pmc_mux/con + register "usb2_port_number" = "4" + register "usb3_port_number" = "2" + # SBU is fixed, HSL follows CC + register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL" + device generic 1 on end + end + end + end + end # PMC + end +end |