summaryrefslogtreecommitdiff
path: root/src/mainboard/google
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/google')
-rw-r--r--src/mainboard/google/hatch/Kconfig2
-rw-r--r--src/mainboard/google/hatch/variants/baseboard/devicetree.cb141
-rw-r--r--src/mainboard/google/hatch/variants/hatch/overridetree.cb123
-rw-r--r--src/mainboard/google/hatch/variants/hatch_whl/overridetree.cb126
4 files changed, 257 insertions, 135 deletions
diff --git a/src/mainboard/google/hatch/Kconfig b/src/mainboard/google/hatch/Kconfig
index f57b41043f..041ac2d95e 100644
--- a/src/mainboard/google/hatch/Kconfig
+++ b/src/mainboard/google/hatch/Kconfig
@@ -85,7 +85,7 @@ config MAX_CPUS
config OVERRIDE_DEVICETREE
string
- default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb" if !BOARD_GOOGLE_HATCH_WHL
+ default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb"
config TPM_TIS_ACPI_INTERRUPT
int
diff --git a/src/mainboard/google/hatch/variants/baseboard/devicetree.cb b/src/mainboard/google/hatch/variants/baseboard/devicetree.cb
index 007f297c39..2f1120a584 100644
--- a/src/mainboard/google/hatch/variants/baseboard/devicetree.cb
+++ b/src/mainboard/google/hatch/variants/baseboard/devicetree.cb
@@ -17,35 +17,6 @@ chip soc/intel/cannonlake
# EC memory map range is 0x900-0x9ff
register "gen3_dec" = "0x00fc0901"
- # Intel Common SoC Config
- #+-------------------+---------------------------+
- #| Field | Value |
- #+-------------------+---------------------------+
- #| GSPI0 | cr50 TPM. Early init is |
- #| | required to set up a BAR |
- #| | for TPM communication |
- #| | before memory is up |
- #| GSPI1 | FP MCU |
- #| I2C0 | Touchpad |
- #| I2C1 | Touch screen |
- #| I2C4 | Audio |
- #+-------------------+---------------------------+
- register "common_soc_config" = "{
- .gspi[0] = {
- .speed_mhz = 1,
- .early_init = 1,
- },
- .i2c[0] = {
- .speed = I2C_SPEED_FAST,
- },
- .i2c[1] = {
- .speed = I2C_SPEED_FAST,
- },
- .i2c[4] = {
- .speed = I2C_SPEED_FAST,
- },
- }"
-
# FSP configuration
register "InternalGfx" = "1"
register "SkipExtGfxScan" = "1"
@@ -214,87 +185,11 @@ chip soc/intel/cannonlake
register "wake" = "GPE0_PME_B0"
device pci 14.3 on end # CNVi wifi
end
- device pci 14.5 on end # SDCard
- device pci 15.0 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0000""
- register "desc" = ""ELAN Touchpad""
- register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D21_IRQ)"
- register "wake" = "GPE0_DW0_21"
- device i2c 15 on end
- end
- end # I2C #0
- device pci 15.1 on
- chip drivers/i2c/generic
- register "hid" = ""ELAN0001""
- register "desc" = ""ELAN Touchscreen""
- register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)"
- register "probed" = "1"
- register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)"
- register "reset_delay_ms" = "100"
- register "reset_off_delay_ms" = "5"
- register "has_power_resource" = "1"
- register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C4)"
- register "stop_off_delay_ms" = "5"
- device i2c 49 on end
- end
- chip drivers/i2c/hid
- register "generic.hid" = ""GDIX0000""
- register "generic.desc" = ""Goodix Touchscreen""
- register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)"
- register "generic.probed" = "1"
- register "generic.reset_gpio" =
- "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)"
- register "generic.reset_delay_ms" = "30"
- register "generic.reset_off_delay_ms" = "3"
- register "generic.has_power_resource" = "1"
- register "hid_desc_reg_offset" = "0x01"
- device i2c 5d on end
- end
- end # I2C #1
- device pci 15.2 on
- chip drivers/generic/gpio_keys
- register "name" = ""PENH""
- register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_HIGH(GPP_A8)"
- register "key.dev_name" = ""EJCT""
- register "key.linux_code" = "SW_PEN_INSERTED"
- register "key.linux_input_type" = "EV_SW"
- register "key.label" = ""pen_eject""
- device generic 0 on end
- end
- end # I2C #2
- device pci 15.3 on
- chip drivers/i2c/sx9310
- register "desc" = ""SAR Proximity Sensor""
- register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_A0_IRQ)"
- register "speed" = "I2C_SPEED_FAST"
- register "uid" = "1"
- register "reg_prox_ctrl0" = "0x10"
- register "reg_prox_ctrl1" = "0x00"
- register "reg_prox_ctrl2" = "0x84"
- register "reg_prox_ctrl3" = "0x0e"
- register "reg_prox_ctrl4" = "0x07"
- register "reg_prox_ctrl5" = "0xc6"
- register "reg_prox_ctrl6" = "0x20"
- register "reg_prox_ctrl7" = "0x0d"
- register "reg_prox_ctrl8" = "0x8d"
- register "reg_prox_ctrl9" = "0x43"
- register "reg_prox_ctrl10" = "0x1f"
- register "reg_prox_ctrl11" = "0x00"
- register "reg_prox_ctrl12" = "0x00"
- register "reg_prox_ctrl13" = "0x00"
- register "reg_prox_ctrl14" = "0x00"
- register "reg_prox_ctrl15" = "0x00"
- register "reg_prox_ctrl16" = "0x00"
- register "reg_prox_ctrl17" = "0x00"
- register "reg_prox_ctrl18" = "0x00"
- register "reg_prox_ctrl19" = "0x00"
- register "reg_sar_ctrl0" = "0x50"
- register "reg_sar_ctrl1" = "0x8a"
- register "reg_sar_ctrl2" = "0x3c"
- device i2c 28 on end
- end
- end # I2C #3
+ device pci 14.5 on end # SDCard
+ device pci 15.0 on end # I2C #0
+ device pci 15.1 on end # I2C #1
+ device pci 15.2 on end # I2C #2
+ device pci 15.3 on end # I2C #3
device pci 16.0 on end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
@@ -302,20 +197,7 @@ chip soc/intel/cannonlake
device pci 16.4 off end # Management Engine Interface 3
device pci 16.5 off end # Management Engine Interface 4
device pci 17.0 on end # SATA
- device pci 19.0 on
- chip drivers/i2c/generic
- register "hid" = ""10EC5682""
- register "name" = ""RT58""
- register "desc" = ""Realtek RT5682""
- register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_H0_IRQ)"
- register "property_count" = "1"
- # Set the jd_src to RT5668_JD1 for jack detection
- register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
- register "property_list[0].name" = ""realtek,jd-src""
- register "property_list[0].integer" = "1"
- device i2c 1a on end
- end
- end #I2C #4
+ device pci 19.0 on end #I2C #4
device pci 19.1 off end # I2C #5
device pci 19.2 off end # UART #2
device pci 1a.0 off end # eMMC
@@ -348,16 +230,7 @@ chip soc/intel/cannonlake
device spi 0 on end
end
end # GSPI #0
- device pci 1e.3 on
- chip drivers/spi/acpi
- register "name" = ""CRFP""
- register "hid" = "ACPI_DT_NAMESPACE_HID"
- register "uid" = "1"
- register "compat_string" = ""google,cros-ec-spi""
- register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_A23_IRQ)"
- device spi 1 on end
- end # FPMCU
- end # GSPI #1
+ device pci 1e.3 on end # GSPI #1
device pci 1f.0 on
chip ec/google/chromeec
device pnp 0c09.0 on end
diff --git a/src/mainboard/google/hatch/variants/hatch/overridetree.cb b/src/mainboard/google/hatch/variants/hatch/overridetree.cb
index 6e6414e8a8..28644d14cf 100644
--- a/src/mainboard/google/hatch/variants/hatch/overridetree.cb
+++ b/src/mainboard/google/hatch/variants/hatch/overridetree.cb
@@ -15,4 +15,127 @@ chip soc/intel/cannonlake
[PchSerialIoIndexUART2] = PchSerialIoDisabled,
}"
+ # Intel Common SoC Config
+ #+-------------------+---------------------------+
+ #| Field | Value |
+ #+-------------------+---------------------------+
+ #| GSPI0 | cr50 TPM. Early init is |
+ #| | required to set up a BAR |
+ #| | for TPM communication |
+ #| | before memory is up |
+ #| GSPI1 | FP MCU |
+ #| I2C0 | Touchpad |
+ #| I2C1 | Touch screen |
+ #| I2C4 | Audio |
+ #+-------------------+---------------------------+
+ register "common_soc_config" = "{
+ .gspi[0] = {
+ .speed_mhz = 1,
+ .early_init = 1,
+ },
+ .i2c[0] = {
+ .speed = I2C_SPEED_FAST,
+ },
+ .i2c[1] = {
+ .speed = I2C_SPEED_FAST,
+ },
+ .i2c[4] = {
+ .speed = I2C_SPEED_FAST,
+ },
+ }"
+
+ device domain 0 on
+ device pci 15.0 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D21_IRQ)"
+ register "wake" = "GPE0_DW0_21"
+ device i2c 15 on end
+ end
+ end # I2C #0
+ device pci 15.1 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0001""
+ register "desc" = ""ELAN Touchscreen""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)"
+ register "probed" = "1"
+ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)"
+ register "reset_delay_ms" = "100"
+ register "reset_off_delay_ms" = "5"
+ register "has_power_resource" = "1"
+ register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C4)"
+ register "stop_off_delay_ms" = "5"
+ device i2c 49 on end
+ end
+ end # I2C #1
+ device pci 15.2 on
+ chip drivers/generic/gpio_keys
+ register "name" = ""PENH""
+ register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_HIGH(GPP_A8)"
+ register "key.dev_name" = ""EJCT""
+ register "key.linux_code" = "SW_PEN_INSERTED"
+ register "key.linux_input_type" = "EV_SW"
+ register "key.label" = ""pen_eject""
+ device generic 0 on end
+ end
+ end # I2C #2
+ device pci 15.3 on
+ chip drivers/i2c/sx9310
+ register "desc" = ""SAR Proximity Sensor""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_A0_IRQ)"
+ register "speed" = "I2C_SPEED_FAST"
+ register "uid" = "1"
+ register "reg_prox_ctrl0" = "0x10"
+ register "reg_prox_ctrl1" = "0x00"
+ register "reg_prox_ctrl2" = "0x84"
+ register "reg_prox_ctrl3" = "0x0e"
+ register "reg_prox_ctrl4" = "0x07"
+ register "reg_prox_ctrl5" = "0xc6"
+ register "reg_prox_ctrl6" = "0x20"
+ register "reg_prox_ctrl7" = "0x0d"
+ register "reg_prox_ctrl8" = "0x8d"
+ register "reg_prox_ctrl9" = "0x43"
+ register "reg_prox_ctrl10" = "0x1f"
+ register "reg_prox_ctrl11" = "0x00"
+ register "reg_prox_ctrl12" = "0x00"
+ register "reg_prox_ctrl13" = "0x00"
+ register "reg_prox_ctrl14" = "0x00"
+ register "reg_prox_ctrl15" = "0x00"
+ register "reg_prox_ctrl16" = "0x00"
+ register "reg_prox_ctrl17" = "0x00"
+ register "reg_prox_ctrl18" = "0x00"
+ register "reg_prox_ctrl19" = "0x00"
+ register "reg_sar_ctrl0" = "0x50"
+ register "reg_sar_ctrl1" = "0x8a"
+ register "reg_sar_ctrl2" = "0x3c"
+ device i2c 28 on end
+ end
+ end # I2C #3
+ device pci 19.0 on
+ chip drivers/i2c/generic
+ register "hid" = ""10EC5682""
+ register "name" = ""RT58""
+ register "desc" = ""Realtek RT5682""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_H0_IRQ)"
+ register "property_count" = "1"
+ # Set the jd_src to RT5668_JD1 for jack detection
+ register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+ register "property_list[0].name" = ""realtek,jd-src""
+ register "property_list[0].integer" = "1"
+ device i2c 1a on end
+ end
+ end #I2C #4
+ device pci 1e.3 on
+ chip drivers/spi/acpi
+ register "name" = ""CRFP""
+ register "hid" = "ACPI_DT_NAMESPACE_HID"
+ register "uid" = "1"
+ register "compat_string" = ""google,cros-ec-spi""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_A23_IRQ)"
+ device spi 1 on end
+ end # FPMCU
+ end # GSPI #1
+ end
+
end
diff --git a/src/mainboard/google/hatch/variants/hatch_whl/overridetree.cb b/src/mainboard/google/hatch/variants/hatch_whl/overridetree.cb
new file mode 100644
index 0000000000..9b772c2cd7
--- /dev/null
+++ b/src/mainboard/google/hatch/variants/hatch_whl/overridetree.cb
@@ -0,0 +1,126 @@
+chip soc/intel/cannonlake
+
+ # Intel Common SoC Config
+ #+-------------------+---------------------------+
+ #| Field | Value |
+ #+-------------------+---------------------------+
+ #| GSPI0 | cr50 TPM. Early init is |
+ #| | required to set up a BAR |
+ #| | for TPM communication |
+ #| | before memory is up |
+ #| GSPI1 | FP MCU |
+ #| I2C0 | Touchpad |
+ #| I2C1 | Touch screen |
+ #| I2C4 | Audio |
+ #+-------------------+---------------------------+
+ register "common_soc_config" = "{
+ .gspi[0] = {
+ .speed_mhz = 1,
+ .early_init = 1,
+ },
+ .i2c[0] = {
+ .speed = I2C_SPEED_FAST,
+ },
+ .i2c[1] = {
+ .speed = I2C_SPEED_FAST,
+ },
+ .i2c[4] = {
+ .speed = I2C_SPEED_FAST,
+ },
+ }"
+
+ device domain 0 on
+ device pci 15.0 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0000""
+ register "desc" = ""ELAN Touchpad""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D21_IRQ)"
+ register "wake" = "GPE0_DW0_21"
+ device i2c 15 on end
+ end
+ end # I2C #0
+ device pci 15.1 on
+ chip drivers/i2c/generic
+ register "hid" = ""ELAN0001""
+ register "desc" = ""ELAN Touchscreen""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_D16_IRQ)"
+ register "probed" = "1"
+ register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D15)"
+ register "reset_delay_ms" = "100"
+ register "reset_off_delay_ms" = "5"
+ register "has_power_resource" = "1"
+ register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C4)"
+ register "stop_off_delay_ms" = "5"
+ device i2c 49 on end
+ end
+ end # I2C #1
+ device pci 15.2 on
+ chip drivers/generic/gpio_keys
+ register "name" = ""PENH""
+ register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_HIGH(GPP_A8)"
+ register "key.dev_name" = ""EJCT""
+ register "key.linux_code" = "SW_PEN_INSERTED"
+ register "key.linux_input_type" = "EV_SW"
+ register "key.label" = ""pen_eject""
+ device generic 0 on end
+ end
+ end # I2C #2
+ device pci 15.3 on
+ chip drivers/i2c/sx9310
+ register "desc" = ""SAR Proximity Sensor""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_A0_IRQ)"
+ register "speed" = "I2C_SPEED_FAST"
+ register "uid" = "1"
+ register "reg_prox_ctrl0" = "0x10"
+ register "reg_prox_ctrl1" = "0x00"
+ register "reg_prox_ctrl2" = "0x84"
+ register "reg_prox_ctrl3" = "0x0e"
+ register "reg_prox_ctrl4" = "0x07"
+ register "reg_prox_ctrl5" = "0xc6"
+ register "reg_prox_ctrl6" = "0x20"
+ register "reg_prox_ctrl7" = "0x0d"
+ register "reg_prox_ctrl8" = "0x8d"
+ register "reg_prox_ctrl9" = "0x43"
+ register "reg_prox_ctrl10" = "0x1f"
+ register "reg_prox_ctrl11" = "0x00"
+ register "reg_prox_ctrl12" = "0x00"
+ register "reg_prox_ctrl13" = "0x00"
+ register "reg_prox_ctrl14" = "0x00"
+ register "reg_prox_ctrl15" = "0x00"
+ register "reg_prox_ctrl16" = "0x00"
+ register "reg_prox_ctrl17" = "0x00"
+ register "reg_prox_ctrl18" = "0x00"
+ register "reg_prox_ctrl19" = "0x00"
+ register "reg_sar_ctrl0" = "0x50"
+ register "reg_sar_ctrl1" = "0x8a"
+ register "reg_sar_ctrl2" = "0x3c"
+ device i2c 28 on end
+ end
+ end # I2C #3
+ device pci 19.0 on
+ chip drivers/i2c/generic
+ register "hid" = ""10EC5682""
+ register "name" = ""RT58""
+ register "desc" = ""Realtek RT5682""
+ register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_H0_IRQ)"
+ register "property_count" = "1"
+ # Set the jd_src to RT5668_JD1 for jack detection
+ register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+ register "property_list[0].name" = ""realtek,jd-src""
+ register "property_list[0].integer" = "1"
+ device i2c 1a on end
+ end
+ end #I2C #4
+ device pci 1e.3 on
+ chip drivers/spi/acpi
+ register "name" = ""CRFP""
+ register "hid" = "ACPI_DT_NAMESPACE_HID"
+ register "uid" = "1"
+ register "compat_string" = ""google,cros-ec-spi""
+ register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_A23_IRQ)"
+ device spi 1 on end
+ end # FPMCU
+ end # GSPI #1
+ end
+
+end