summaryrefslogtreecommitdiff
path: root/src/mainboard/google
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/google')
-rw-r--r--src/mainboard/google/zork/Kconfig1
-rw-r--r--src/mainboard/google/zork/variants/baseboard/devicetree_dalboz.cb27
-rw-r--r--src/mainboard/google/zork/variants/baseboard/devicetree_trembyle.cb27
-rw-r--r--src/mainboard/google/zork/variants/baseboard/ramstage_common.c41
4 files changed, 68 insertions, 28 deletions
diff --git a/src/mainboard/google/zork/Kconfig b/src/mainboard/google/zork/Kconfig
index 9740d632ac..75b3e01345 100644
--- a/src/mainboard/google/zork/Kconfig
+++ b/src/mainboard/google/zork/Kconfig
@@ -14,6 +14,7 @@ config BOARD_SPECIFIC_OPTIONS
select SOC_AMD_PICASSO
select VGA_BIOS
select BOARD_ROMSIZE_KB_16384
+ select DRIVERS_AMD_I2S_MACHINE_DEV
select DISABLE_SPI_FLASH_ROM_SHARING
select DRIVERS_GENERIC_GPIO_KEYS
select DRIVERS_I2C_GENERIC
diff --git a/src/mainboard/google/zork/variants/baseboard/devicetree_dalboz.cb b/src/mainboard/google/zork/variants/baseboard/devicetree_dalboz.cb
index 4a605b0665..e355b5b14a 100644
--- a/src/mainboard/google/zork/variants/baseboard/devicetree_dalboz.cb
+++ b/src/mainboard/google/zork/variants/baseboard/devicetree_dalboz.cb
@@ -17,16 +17,6 @@ chip soc/amd/picasso
register "acp_i2s_wake_enable" = "1"
register "acpi_pme_enable" = "1"
- # DMIC select GPIO for ACP machine device
- # This GPIO is used to select DMIC0 or DMIC1 by the kernel driver. It does not
- # really have a polarity since low and high control the selection of DMIC and
- # hence does not have an active polarity.
- # Kernel driver does not use the polarity field and instead treats the GPIO
- # selection as follows:
- # Set low (0) = Select DMIC0
- # Set high (1) = Select DMIC1
- register "dmic_select_gpio" = "ACPI_GPIO_OUTPUT(GPIO_67)"
-
# Start : OPN Performance Configuration
# (Configuratin that is common for all variants)
# For the below fields, 0 indicates use SOC default
@@ -273,7 +263,22 @@ chip soc/amd/picasso
end
end
end
- device pci 0.5 on end # Audio
+ device pci 0.5 on
+ chip drivers/amd/i2s_machine_dev
+ register "hid" = ""AMDI5682""
+ # DMIC select GPIO for ACP machine device
+ # This GPIO is used to select DMIC0 or DMIC1 by the
+ # kernel driver. It does not really have a polarity
+ # since low and high control the selection of DMIC and
+ # hence does not have an active polarity.
+ # Kernel driver does not use the polarity field and
+ # instead treats the GPIO selection as follows:
+ # Set low (0) = Select DMIC0
+ # Set high (1) = Select DMIC1
+ register "dmic_select_gpio" = "ACPI_GPIO_OUTPUT(GPIO_67)"
+ device generic 0.0 on end
+ end
+ end # Audio
device pci 0.6 on end # HDA
device pci 0.7 on end # non-Sensor Fusion Hub device
end
diff --git a/src/mainboard/google/zork/variants/baseboard/devicetree_trembyle.cb b/src/mainboard/google/zork/variants/baseboard/devicetree_trembyle.cb
index 883556287c..283e7a07a4 100644
--- a/src/mainboard/google/zork/variants/baseboard/devicetree_trembyle.cb
+++ b/src/mainboard/google/zork/variants/baseboard/devicetree_trembyle.cb
@@ -17,16 +17,6 @@ chip soc/amd/picasso
register "acp_i2s_wake_enable" = "1"
register "acpi_pme_enable" = "1"
- # DMIC select GPIO for ACP machine device
- # This GPIO is used to select DMIC0 or DMIC1 by the kernel driver. It does not
- # really have a polarity since low and high control the selection of DMIC and
- # hence does not have an active polarity.
- # Kernel driver does not use the polarity field and instead treats the GPIO
- # selection as follows:
- # Set low (0) = Select DMIC0
- # Set high (1) = Select DMIC1
- register "dmic_select_gpio" = "ACPI_GPIO_OUTPUT(GPIO_67)"
-
# Start : OPN Performance Configuration
# (Configuratin that is common for all variants)
# For the below fields, 0 indicates use SOC default
@@ -301,7 +291,22 @@ chip soc/amd/picasso
end
end
end
- device pci 0.5 on end # Audio
+ device pci 0.5 on
+ chip drivers/amd/i2s_machine_dev
+ register "hid" = ""AMDI5682""
+ # DMIC select GPIO for ACP machine device
+ # This GPIO is used to select DMIC0 or DMIC1 by the
+ # kernel driver. It does not really have a polarity
+ # since low and high control the selection of DMIC and
+ # hence does not have an active polarity.
+ # Kernel driver does not use the polarity field and
+ # instead treats the GPIO selection as follows:
+ # Set low (0) = Select DMIC0
+ # Set high (1) = Select DMIC1
+ register "dmic_select_gpio" = "ACPI_GPIO_OUTPUT(GPIO_67)"
+ device generic 0.0 on end
+ end
+ end # Audio
device pci 0.6 on end # HDA
device pci 0.7 on end # non-Sensor Fusion Hub device
end
diff --git a/src/mainboard/google/zork/variants/baseboard/ramstage_common.c b/src/mainboard/google/zork/variants/baseboard/ramstage_common.c
index f7f11b88ea..511d60d0b8 100644
--- a/src/mainboard/google/zork/variants/baseboard/ramstage_common.c
+++ b/src/mainboard/google/zork/variants/baseboard/ramstage_common.c
@@ -2,19 +2,48 @@
#include <acpi/acpi_device.h>
#include <baseboard/variants.h>
+#include <drivers/amd/i2s_machine_dev/chip.h>
#include <ec/google/chromeec/ec.h>
#include <soc/gpio.h>
+#include <soc/pci_devs.h>
+
+extern struct chip_operations drivers_amd_i2s_machine_dev_ops;
void variant_audio_update(void)
{
- struct soc_amd_picasso_config *cfg = config_of_soc();
- struct acpi_gpio *gpio = &cfg->dmic_select_gpio;
+ const struct device *gpp_a_dev;
+ const struct device *acp_dev;
+ struct device *machine_dev = NULL;
if (variant_uses_v3_schematics())
return;
- if (CONFIG(BOARD_GOOGLE_BASEBOARD_TREMBYLE))
- gpio->pins[0] = GPIO_13;
- else
- gpio->pins[0] = GPIO_6;
+ gpp_a_dev = pcidev_path_on_root(PCIE_GPP_A_DEVFN);
+ if (gpp_a_dev == NULL)
+ return;
+
+ acp_dev = pcidev_path_behind(gpp_a_dev->link_list, AUDIO_DEVFN);
+ if (acp_dev == NULL)
+ return;
+
+ while ((machine_dev = dev_bus_each_child(acp_dev->link_list, machine_dev)) != NULL) {
+ struct drivers_amd_i2s_machine_dev_config *cfg;
+ struct acpi_gpio *gpio;
+
+ if (machine_dev->chip_info == NULL)
+ continue;
+
+ if (machine_dev->chip_ops != &drivers_amd_i2s_machine_dev_ops)
+ continue;
+
+ cfg = machine_dev->chip_info;
+ gpio = &cfg->dmic_select_gpio;
+
+ if (CONFIG(BOARD_GOOGLE_BASEBOARD_TREMBYLE))
+ gpio->pins[0] = GPIO_13;
+ else
+ gpio->pins[0] = GPIO_6;
+
+ break;
+ }
}