diff options
Diffstat (limited to 'src/mainboard/hp/820g2/devicetree.cb')
-rw-r--r-- | src/mainboard/hp/820g2/devicetree.cb | 91 |
1 files changed, 91 insertions, 0 deletions
diff --git a/src/mainboard/hp/820g2/devicetree.cb b/src/mainboard/hp/820g2/devicetree.cb new file mode 100644 index 0000000000..0e72479efd --- /dev/null +++ b/src/mainboard/hp/820g2/devicetree.cb @@ -0,0 +1,91 @@ +chip soc/intel/broadwell + register "gfx" = "GMA_STATIC_DISPLAYS(0)" + register "gpu_dp_b_hotplug" = "4" + register "gpu_dp_c_hotplug" = "4" + register "gpu_dp_d_hotplug" = "0" + register "panel_cfg" = "{ + .up_delay_ms = 200, + .down_delay_ms = 50, + .cycle_delay_ms = 500, + .backlight_on_delay_ms = 1, + .backlight_off_delay_ms = 1, + .backlight_pwm_hz = 200, + }" + device cpu_cluster 0x0 on + chip cpu/intel/haswell + device lapic 0 on end + device lapic 0xacac off end + end + end + device domain 0x0 on + subsystemid 0x103c 0x225a inherit + + device pci 00.0 on end # Broadwell Host bridge + device pci 02.0 on end # Internal graphics VGA controller + device pci 03.0 on end # Mini-HD audio + + chip soc/intel/broadwell/pch # Wildcat Point PCH + register "alt_gp_smi_en" = "0" + register "gen1_dec" = "0x007c0201" + register "gen2_dec" = "0x000c0101" + register "gen4_dec" = "0x000402e9" + register "pcie_port_coalesce" = "1" + register "pcie_port_force_aspm" = "0" + register "sata_devslp_disable" = "0" + register "sata_devslp_mux" = "0" + register "sata_port1_gen3_dtle" = "0x2" + register "sata_port1_gen3_tx" = "0x80" + register "sata_port3_gen3_dtle" = "0x4" + register "sata_port3_gen3_tx" = "0x80" + # SATA (1), M.2 (3) + register "sata_port_map" = "0xa" + device pci 13.0 off end # Smart Sound Audio DSP + device pci 14.0 on end # xHCI Controller + device pci 15.0 off end # Serial I/O DMA + device pci 15.1 off end # I2C0 + device pci 15.2 off end # I2C1 + device pci 15.3 off end # GSPI0 + device pci 15.4 off end # GSPI1 + device pci 15.5 off end # UART0 + device pci 15.6 off end # UART1 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 17.0 off end # SDIO + device pci 19.0 on end # Intel Gigabit Ethernet + device pci 1b.0 on end # High Definition Audio + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 on end # PCIe Port #2, Card Reader + device pci 1c.2 off end # PCIe Port #3 + device pci 1c.3 on # PCIe Port #4, WLAN + smbios_slot_desc "SlotTypeM2Socket1_SD" "SlotLengthOther" + "M.2/E 2230" "SlotDataBusWidth1X" + end + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 on # PCIe Port #6, PCIe SSD + smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" + "M.2/M 2242/2260" "SlotDataBusWidth2X" + end + device pci 1d.0 on end # USB2 EHCI #1 + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on # LPC bridge + chip drivers/pc80/tpm + device pnp 0c31.0 on end + end + # This laptop uses MEC1324, but it has the same interface + # as the KBC1126 laptops + chip ec/hp/kbc1126 + register "ec_data_port" = "0x62" + register "ec_cmd_port" = "0x66" + register "ec_ctrl_reg" = "0x81" + register "ec_fan_ctrl_value" = "0x6b" + device pnp ff.1 off end + end + end + device pci 1f.2 on end # SATA Controller (AHCI) + device pci 1f.3 on end # SMBus + device pci 1f.6 off end # Thermal + end + end +end |