diff options
Diffstat (limited to 'src/mainboard/hp/abm/mainboard.c')
| -rw-r--r-- | src/mainboard/hp/abm/mainboard.c | 93 |
1 files changed, 89 insertions, 4 deletions
diff --git a/src/mainboard/hp/abm/mainboard.c b/src/mainboard/hp/abm/mainboard.c index cf02528916..adb70930c8 100644 --- a/src/mainboard/hp/abm/mainboard.c +++ b/src/mainboard/hp/abm/mainboard.c @@ -2,6 +2,7 @@ * This file is part of the coreboot project. * * Copyright (C) 2012 Advanced Micro Devices, Inc. + * Copyright (C) 2014 Sage Electronic Engineering, LLC * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -21,16 +22,97 @@ #include <device/device.h> #include <device/pci.h> #include <arch/io.h> -#include <cpu/x86/msr.h> -#include <cpu/amd/mtrr.h> -#include <device/pci_def.h> #include <arch/acpi.h> #include <northbridge/amd/agesa/BiosCallOuts.h> #include <cpu/amd/agesa/s3_resume.h> #include <northbridge/amd/agesa/agesawrapper.h> +#include <southbridge/amd/amd_pci_util.h> +#include <southbridge/amd/agesa/hudson/pci_devs.h> +#include <northbridge/amd/agesa/family16kb/pci_devs.h> + +void set_pcie_reset(void); +void set_pcie_dereset(void); + +/*********************************************************** + * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01. + * This table is responsible for physically routing the PIC and + * IOAPIC IRQs to the different PCI devices on the system. It + * is read and written via registers 0xC00/0xC01 as an + * Index/Data pair. These values are chipset and mainboard + * dependent and should be updated accordingly. + * + * These values are used by the PCI configuration space, + * MP Tables. TODO: Make ACPI use these values too. + */ +static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = { + [0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B, /* INTA# - INTH# */ + [0x08] = 0x00,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ + [0x10] = 0x1F,0x1F,0x1F,0x0A,0x1F,0x1F,0x1F,0x0A, /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerfMon, SD */ + [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, /* IMC INT0 - 5 */ + [0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A, /* USB Devs 18/19/20/22 INTA-C */ + [0x40] = 0x0B,0x0B, /* IDE, SATA */ +}; + +static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = { + [0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17, /* INTA# - INTH# */ + [0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F, /* Misc-nil,0,1,2, INT from Serial irq */ + [0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,0x10, /* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon, SD */ + [0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F, /* IMC INT0 - 5 */ + [0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12, /* USB Devs 18/19/22/20 INTA-C */ + [0x40] = 0x11,0x13, /* IDE, SATA */ +}; + +/* + * This table defines the index into the picr/intr_data + * tables for each device. Any enabled device and slot + * that uses hardware interrupts should have an entry + * in this table to define its index into the FCH + * PCI_INTR register 0xC00/0xC01. This index will define + * the interrupt that it should use. Putting PIRQ_A into + * the PIN A index for a device will tell that device to + * use PIC IRQ 10 if it uses PIN A for its hardware INT. + */ +static const struct pirq_struct mainboard_pirq_data[] = { + /* {PCI_devfn, {PIN A, PIN B, PIN C, PIN D}}, */ + {GFX_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_NC, PIRQ_NC}}, /* VGA: 01.0 */ + {NB_PCIE_PORT2_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 02.2 */ + {NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 02.3 */ + {NB_PCIE_PORT4_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 02.4 */ + {NB_PCIE_PORT5_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}}, /* NIC: 02.5 */ + {SATA_DEVFN, {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SATA: 11.0 */ + {OHCI1_DEVFN, {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1: 12.0 */ + {EHCI1_DEVFN, {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1: 12.2 */ + {OHCI2_DEVFN, {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2: 13.0 */ + {EHCI2_DEVFN, {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2: 13.2 */ + {SMBUS_DEVFN, {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS: 14.0 */ + {HDA_DEVFN, {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* HDA: 14.2 */ + {SB_PCI_PORT_DEVFN, {PIRQ_H, PIRQ_E, PIRQ_F, PIRQ_G}}, /* PCIB: 14.4 */ + {SD_DEVFN, {PIRQ_SD, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SD: 14.7 */ + {OHCI3_DEVFN, {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI3: 16.0 */ + {EHCI3_DEVFN, {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* EHCI3: 16.2 */ +}; + +/* PIRQ Setup */ +static void pirq_setup(void) +{ + pirq_data_ptr = mainboard_pirq_data; + pirq_data_size = sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct); + intr_data_ptr = mainboard_intr_data; + picr_data_ptr = mainboard_picr_data; +} + +/* TODO: mainboard specific SB AGESA callback */ +void set_pcie_reset(void) +{ +} + +/* TODO: mainboard specific SB AGESA callback */ +void set_pcie_dereset(void) +{ +} /********************************************** - * enable the dedicated function in mainboard. + * Enable the dedicated functions of the board. **********************************************/ static void mainboard_enable(device_t dev) { @@ -38,6 +120,9 @@ static void mainboard_enable(device_t dev) if (acpi_is_wakeup_s3()) agesawrapper_fchs3earlyrestore(); + + /* Initialize the PIRQ data structures for consumption */ + pirq_setup(); } struct chip_operations mainboard_ops = { |