diff options
Diffstat (limited to 'src/mainboard/hp/compaq_8200_elite_sff/devicetree.cb')
| -rw-r--r-- | src/mainboard/hp/compaq_8200_elite_sff/devicetree.cb | 184 |
1 files changed, 94 insertions, 90 deletions
diff --git a/src/mainboard/hp/compaq_8200_elite_sff/devicetree.cb b/src/mainboard/hp/compaq_8200_elite_sff/devicetree.cb index 9dc18be9b9..915f87d450 100644 --- a/src/mainboard/hp/compaq_8200_elite_sff/devicetree.cb +++ b/src/mainboard/hp/compaq_8200_elite_sff/devicetree.cb @@ -75,100 +75,104 @@ chip northbridge/intel/sandybridge device pci 1d.0 on end # USB2 EHCI #1 device pci 1e.0 on end # PCI bridge device pci 1f.0 on # LPC bridge PCI-LPC bridge - chip superio/nuvoton/npcd378 - device pnp 2e.0 off end # Floppy - device pnp 2e.1 on # Parallel port - # global + chip superio/common + device pnp 2e.ff on # passes SIO base addr to SSDT gen + chip superio/nuvoton/npcd378 + device pnp 2e.0 off end # Floppy + device pnp 2e.1 on # Parallel port + # global - # serialice: Vendor writes: - irq 0x14 = 0x9c - irq 0x1c = 0xa8 - irq 0x1d = 0x08 - irq 0x22 = 0x3f - irq 0x1a = 0xb0 - # dumped from superiotool: - irq 0x1b = 0x1e - irq 0x27 = 0x04 - irq 0x2a = 0x00 - irq 0x2d = 0x01 - # parallel port - io 0x60 = 0x378 - irq 0x70 = 0x07 - drq 0x74 = 0x01 - end - device pnp 2e.2 off # COM1 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # COM2, IR - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.4 on # LED control - io 0x60 = 0x600 - # IOBASE[0h] = bit0 LED red / green - # IOBASE[0h] = bit1-4 LED PWM duty cycle - # IOBASE[1h] = bit6 SWCC + # serialice: Vendor writes: + irq 0x14 = 0x9c + irq 0x1c = 0xa8 + irq 0x1d = 0x08 + irq 0x22 = 0x3f + irq 0x1a = 0xb0 + # dumped from superiotool: + irq 0x1b = 0x1e + irq 0x27 = 0x08 + irq 0x2a = 0x20 + irq 0x2d = 0x01 + # parallel port + io 0x60 = 0x378 + irq 0x70 = 0x07 + drq 0x74 = 0x01 + end + device pnp 2e.2 off # COM1 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # COM2, IR + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 on # LED control + io 0x60 = 0x600 + # IOBASE[0h] = bit0 LED red / green + # IOBASE[0h] = bit1-4 LED PWM duty cycle + # IOBASE[1h] = bit6 SWCC - io 0x62 = 0x610 - # IOBASE [0h] = GPES - # IOBASE [1h] = GPEE - # IOBASE [4h:7h] = 32bit upcounter at 1Mhz - # IOBASE [8h:bh] = GPS - # IOBASE [ch:fh] = GPE - end - device pnp 2e.5 on # Mouse - irq 0x70 = 0xc - end - device pnp 2e.6 on # Keyboard - io 0x60 = 0x0060 - io 0x62 = 0x0064 - irq 0x70 = 0x01 - # serialice: Vendor writes: - drq 0xf0 = 0x40 - end - device pnp 2e.7 on # WDT ? - io 0x60 = 0x620 - end - device pnp 2e.8 on # HWM - io 0x60 = 0x800 - # IOBASE[0h:feh] HWM page - # IOBASE[ffh] bit0-bit3 page selector + io 0x62 = 0x610 + # IOBASE [0h] = GPES + # IOBASE [1h] = GPEE + # IOBASE [4h:7h] = 32bit upcounter at 1Mhz + # IOBASE [8h:bh] = GPS + # IOBASE [ch:fh] = GPE + end + device pnp 2e.5 on # Mouse + irq 0x70 = 0xc + end + device pnp 2e.6 on # Keyboard + io 0x60 = 0x0060 + io 0x62 = 0x0064 + irq 0x70 = 0x01 + # serialice: Vendor writes: + drq 0xf0 = 0x40 + end + device pnp 2e.7 on # WDT ? + io 0x60 = 0x620 + end + device pnp 2e.8 on # HWM + io 0x60 = 0x800 + # IOBASE[0h:feh] HWM page + # IOBASE[ffh] bit0-bit3 page selector - drq 0xf0 = 0x20 - drq 0xf1 = 0x01 - drq 0xf2 = 0x40 - drq 0xf3 = 0x01 + drq 0xf0 = 0x20 + drq 0xf1 = 0x01 + drq 0xf2 = 0x40 + drq 0xf3 = 0x01 - drq 0xf4 = 0x66 - drq 0xf5 = 0x67 - drq 0xf6 = 0x66 - drq 0xf7 = 0x01 - end - device pnp 2e.f on # GPIO OD ? - drq 0xf1 = 0x97 - drq 0xf2 = 0x01 - drq 0xf5 = 0x08 - drq 0xfe = 0x80 - end - device pnp 2e.15 on # BUS ? - io 0x60 = 0x0680 - io 0x62 = 0x0690 - end - device pnp 2e.1c on # Suspend Control ? - io 0x60 = 0x640 - # writing to IOBASE[5h] - # 0x0: Power off - # 0x9: Power off and bricked until CMOS battery removed - end - device pnp 2e.1e on # GPIO ? - io 0x60 = 0x660 - drq 0xf4 = 0x01 - # skip the following, as it - # looks like remapped registers - #drq 0xf5 = 0x06 - #drq 0xf6 = 0x60 - #drq 0xfe = 0x03 + drq 0xf4 = 0x66 + drq 0xf5 = 0x67 + drq 0xf6 = 0x66 + drq 0xf7 = 0x01 + end + device pnp 2e.f on # GPIO OD ? + drq 0xf1 = 0x97 + drq 0xf2 = 0x01 + drq 0xf5 = 0x08 + drq 0xfe = 0x80 + end + device pnp 2e.15 on # BUS ? + io 0x60 = 0x0680 + io 0x62 = 0x0690 + end + device pnp 2e.1c on # Suspend Control ? + io 0x60 = 0x640 + # writing to IOBASE[5h] + # 0x0: Power off + # 0x9: Power off and bricked until CMOS battery removed + end + device pnp 2e.1e on # GPIO ? + io 0x60 = 0x660 + drq 0xf4 = 0x01 + # skip the following, as it + # looks like remapped registers + #drq 0xf5 = 0x06 + #drq 0xf6 = 0x60 + #drq 0xfe = 0x03 + end + end end end chip drivers/pc80/tpm |