diff options
Diffstat (limited to 'src/mainboard/intel/adlrvp/devicetree.cb')
| -rw-r--r-- | src/mainboard/intel/adlrvp/devicetree.cb | 274 |
1 files changed, 274 insertions, 0 deletions
diff --git a/src/mainboard/intel/adlrvp/devicetree.cb b/src/mainboard/intel/adlrvp/devicetree.cb new file mode 100644 index 0000000000..ce55fa3914 --- /dev/null +++ b/src/mainboard/intel/adlrvp/devicetree.cb @@ -0,0 +1,274 @@ +chip soc/intel/alderlake + + device cpu_cluster 0 on + device lapic 0 on end + end + + # GPE configuration + # Note that GPE events called out in ASL code rely on this + # route. i.e. If this route changes then the affected GPE + # offset bits also need to be changed. + register "pmc_gpe0_dw0" = "GPP_B" + register "pmc_gpe0_dw1" = "GPP_D" + register "pmc_gpe0_dw2" = "GPP_E" + + # FSP configuration + + register "usb2_ports[0]" = "USB2_PORT_MID(OC0)" # Type-C Port1 + register "usb2_ports[1]" = "USB2_PORT_MID(OC0)" # Type-C Port2 + register "usb2_ports[2]" = "USB2_PORT_MID(OC3)" # Type-C Port3 + register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WWAN + register "usb2_ports[4]" = "USB2_PORT_MID(OC3)" # Type-C Port4 + register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # FPS connector + register "usb2_ports[6]" = "USB2_PORT_MID(OC0)" # USB3/2 Type A port1 + register "usb2_ports[7]" = "USB2_PORT_MID(OC0)" # USB3/2 Type A port2 + register "usb2_ports[8]" = "USB2_PORT_MID(OC3)" # USB3/2 Type A port3 + register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)" # M.2 WLAN + + register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC3)" # USB3/2 Type A port1 + register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port2 + register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC0)" # USB3/2 Type A port3 + register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # M.2 WWAN + + # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x000c0201" + # EC memory map range is 0x900-0x9ff + register "gen3_dec" = "0x00fc0901" + register "gen4_dec" = "0x000c0081" + + register "PrmrrSize" = "0" + + # Enable PCH PCIE RP 5 using CLK 2 + register "PcieRpEnable[4]" = "1" + register "PcieClkSrcClkReq[2]" = "2" + register "PcieClkSrcUsage[2]" = "0x4" + register "PcieRpClkReqDetect[4]" = "1" + + # Enable PCH PCIE RP 6 using CLK 5 + register "PcieRpEnable[5]" = "1" + register "PcieClkSrcClkReq[5]" = "5" + register "PcieClkSrcUsage[5]" = "0x5" + register "PcieRpClkReqDetect[5]" = "1" + + # Enable PCH PCIE RP 9 using CLK 1 + register "PcieRpEnable[8]" = "1" + register "PcieClkSrcClkReq[1]" = "1" + register "PcieClkSrcUsage[1]" = "0x8" + register "PcieRpClkReqDetect[8]" = "1" + + # Enable PCH PCIE RP 11 for optane + register "PcieRpEnable[10]" = "1" + # Hybrid storage mode + register "HybridStorageMode" = "1" + + # Enable CPU PCIE RP 1 using PEG CLK 0 + register "PcieClkSrcUsage[0]" = "0x40" + + # Enable PCU PCIE PEG Slot 1 and 2 + register "PcieClkSrcUsage[3]" = "0x41" + register "PcieClkSrcUsage[4]" = "0x42" + + # Mark LAN CLK pins as unused as GbE 0:0x1f.6 is disabled below + register "PcieClkSrcUsage[6]" = "0xff" + + register "SataSalpSupport" = "1" + + register "SataPortsEnable" = "{ + [0] = 1, + [1] = 1, + [2] = 1, + [3] = 1, + }" + + register "SataPortsDevSlp" = "{ + [0] = 1, + [1] = 1, + [2] = 1, + [3] = 1, + }" + + # Enable EDP in PortA + register "DdiPortAConfig" = "1" + register "DdiPortBConfig" = "1" + + # TCSS USB3 + register "TcssAuxOri" = "0" + + register "s0ix_enable" = "1" + + register "SerialIoI2cMode" = "{ + [PchSerialIoIndexI2C0] = PchSerialIoPci, + [PchSerialIoIndexI2C1] = PchSerialIoPci, + [PchSerialIoIndexI2C2] = PchSerialIoPci, + [PchSerialIoIndexI2C3] = PchSerialIoPci, + [PchSerialIoIndexI2C4] = PchSerialIoDisabled, + [PchSerialIoIndexI2C5] = PchSerialIoPci, + }" + + register "SerialIoGSpiMode" = "{ + [PchSerialIoIndexGSPI0] = PchSerialIoPci, + [PchSerialIoIndexGSPI1] = PchSerialIoDisabled, + [PchSerialIoIndexGSPI2] = PchSerialIoDisabled, + [PchSerialIoIndexGSPI3] = PchSerialIoDisabled, + }" + + register "SerialIoGSpiCsMode" = "{ + [PchSerialIoIndexGSPI0] = 0, + [PchSerialIoIndexGSPI1] = 0, + [PchSerialIoIndexGSPI2] = 0, + [PchSerialIoIndexGSPI3] = 0, + }" + + register "SerialIoGSpiCsState" = "{ + [PchSerialIoIndexGSPI0] = 0, + [PchSerialIoIndexGSPI1] = 0, + [PchSerialIoIndexGSPI2] = 0, + [PchSerialIoIndexGSPI3] = 0, + }" + + register "SerialIoUartMode" = "{ + [PchSerialIoIndexUART0] = PchSerialIoSkipInit, + [PchSerialIoIndexUART1] = PchSerialIoDisabled, + [PchSerialIoIndexUART2] = PchSerialIoDisabled, + }" + + # HD Audio + register "PchHdaDspEnable" = "1" + register "PchHdaAudioLinkHdaEnable" = "0" + register "PchHdaAudioLinkDmicEnable[0]" = "1" + register "PchHdaAudioLinkDmicEnable[1]" = "1" + register "PchHdaAudioLinkSndwEnable[0]" = "1" + register "PchHdaAudioLinkSndwEnable[1]" = "1" + # iDisp-Link T-Mode 0: 2T, 2: 4T, 3: 8T, 4: 16T + register "PchHdaIDispLinkTmode" = "2" + # iDisp-Link Freq 4: 96MHz, 3: 48MHz. + register "PchHdaIDispLinkFrequency" = "4" + # Not disconnected/enumerable + register "PchHdaIDispCodecDisconnect" = "0" + + # Intel Common SoC Config + register "common_soc_config" = "{ + .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, + .i2c[0] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[3] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + }, + }" + + device domain 0 on + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Graphics + device pci 04.0 on end # DPTF + device pci 05.0 on end # IPU + device pci 06.0 on end # PEG60 + device pci 07.0 on end # TBT_PCIe0 + device pci 07.1 on end # TBT_PCIe1 + device pci 07.2 on end # TBT_PCIe2 + device pci 07.3 on end # TBT_PCIe3 + device pci 08.0 off end # GNA + device pci 09.0 off end # NPK + device pci 0a.0 off end # Crash-log SRAM + device pci 0d.0 on end # USB xHCI + device pci 0d.1 on end # USB xDCI (OTG) + device pci 0d.2 on end # TBT DMA0 + device pci 0d.3 on end # TBT DMA1 + device pci 0e.0 off end # VMD + device pci 10.0 off end + device pci 10.1 off end + device pci 10.2 on end # CNVi: BT + device pci 10.6 off end # THC0 + device pci 10.7 off end # THC1 + device pci 11.0 off end + device pci 11.1 off end + device pci 11.2 off end + device pci 11.3 off end + device pci 11.4 off end + device pci 11.5 off end + device pci 12.0 off end # SensorHUB + device pci 12.5 off end + device pci 12.6 off end # GSPI2 + device pci 13.0 off end # GSPI3 + device pci 13.1 off end + device pci 14.0 on + chip drivers/usb/acpi + register "desc" = ""Root Hub"" + register "type" = "UPC_TYPE_HUB" + device usb 0.0 on + chip drivers/usb/acpi + register "desc" = ""Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + device usb 2.9 on end + end + end + end + end # USB3.1 xHCI + device pci 14.1 off end # USB3.1 xDCI + device pci 14.2 off end # Shared RAM + device pci 14.3 on + chip drivers/wifi/generic + register "wake" = "GPE0_PME_B0" + device generic 0 on end + end + end # CNVi: WiFi + device pci 15.0 on end # I2C0 + device pci 15.1 on end # I2C1 + device pci 15.2 on end # I2C2 + device pci 15.3 on end # I2C3 + device pci 16.0 on end # HECI1 + device pci 16.1 off end # HECI2 + device pci 16.2 off end # CSME + device pci 16.3 off end # CSME + device pci 16.4 off end # HECI3 + device pci 16.5 off end # HECI4 + device pci 17.0 on end # SATA + device pci 19.0 off end # I2C4 + device pci 19.1 on end # I2C5 + device pci 19.2 off end # UART2 + device pci 1c.0 on end # RP1 + device pci 1c.1 off end # RP2 + device pci 1c.2 off end # RP3 + device pci 1c.3 off end # RP4 + device pci 1c.4 on end # RP5 + device pci 1c.5 on end # RP6 + device pci 1c.6 off end # RP7 + device pci 1c.7 off end # RP8 + device pci 1d.0 on end # RP9 + device pci 1d.1 off end # RP10 + device pci 1d.2 on end # RP11 + device pci 1d.3 off end # RP12 + device pci 1e.0 on end # UART0 + device pci 1e.1 off end # UART1 + device pci 1e.2 on end # GSPI0 + device pci 1e.3 off end # GSPI1 + device pci 1f.0 on end # eSPI + device pci 1f.1 on end # P2SB + device pci 1f.2 hidden end # PMC + device pci 1f.3 on + chip drivers/intel/soundwire + device generic 0 on + chip drivers/soundwire/alc711 + # SoundWire Link 0 ID 1 + register "desc" = ""Headset Codec"" + device generic 0.1 on end + end + end + end + end # Intel Audio SNDW + device pci 1f.4 on end # SMBus + device pci 1f.5 on end # SPI + device pci 1f.6 off end # GbE + device pci 1f.7 off end # TH + end +end |