summaryrefslogtreecommitdiff
path: root/src/mainboard/intel/kblrvp/variants
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/intel/kblrvp/variants')
-rw-r--r--src/mainboard/intel/kblrvp/variants/rvp7/devicetree.cb267
-rw-r--r--src/mainboard/intel/kblrvp/variants/rvp7/include/variant/gpio.h221
2 files changed, 488 insertions, 0 deletions
diff --git a/src/mainboard/intel/kblrvp/variants/rvp7/devicetree.cb b/src/mainboard/intel/kblrvp/variants/rvp7/devicetree.cb
new file mode 100644
index 0000000000..e79c046b8f
--- /dev/null
+++ b/src/mainboard/intel/kblrvp/variants/rvp7/devicetree.cb
@@ -0,0 +1,267 @@
+chip soc/intel/skylake
+
+ # SATA port 0
+ register "EnableSata" = "1"
+ register "SataPortsEnable[0]" = "1"
+ register "SataPortsEnable[1]" = "1"
+ register "SataPortsEnable[2]" = "1"
+
+ # Enable deep Sx states
+ register "deep_s5_enable" = "1"
+ register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
+
+ # GPE configuration
+ # Note that GPE events called out in ASL code rely on this
+ # route. i.e. If this route changes then the affected GPE
+ # offset bits also need to be changed.
+ register "gpe0_dw0" = "GPP_B"
+ register "gpe0_dw1" = "GPP_D"
+ register "gpe0_dw2" = "GPP_E"
+
+ # EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
+ register "gen1_dec" = "0x00fc0801"
+ register "gen2_dec" = "0x000c0201"
+
+ # Enable "Intel Speed Shift Technology"
+ register "speed_shift_enable" = "1"
+
+ # Enable DPTF
+ register "dptf_enable" = "1"
+
+ # FSP Configuration
+ register "SmbusEnable" = "1"
+ register "ScsEmmcEnabled" = "1"
+ register "ScsEmmcHs400Enabled" = "1"
+ register "ScsSdCardEnabled" = "2"
+ register "InternalGfx" = "1"
+ register "SkipExtGfxScan" = "1"
+ register "Device4Enable" = "1"
+ register "HeciEnabled" = "0"
+ register "SaGv" = "3"
+ register "PmTimerDisabled" = "1"
+
+ register "pirqa_routing" = "PCH_IRQ11"
+ register "pirqb_routing" = "PCH_IRQ10"
+ register "pirqc_routing" = "PCH_IRQ11"
+ register "pirqd_routing" = "PCH_IRQ11"
+ register "pirqe_routing" = "PCH_IRQ11"
+ register "pirqf_routing" = "PCH_IRQ11"
+ register "pirqg_routing" = "PCH_IRQ11"
+ register "pirqh_routing" = "PCH_IRQ11"
+
+ # Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch
+ # SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s
+ register "PmConfigSlpS3MinAssert" = "0x02"
+
+ # SLP_S4 Minimum Assertion Width. Values 0: default, 1: 1s, 2: 2s, 3: 3s, 4: 4s
+ register "PmConfigSlpS4MinAssert" = "0x04"
+
+ # SLP_SUS Minimum Assertion Width. Values 0: 0ms, 1: 500ms, 2: 1s, 3: 4s
+ register "PmConfigSlpSusMinAssert" = "0x03"
+
+ # SLP_A Minimum Assertion Width. Values 0: 0ms, 1: 4s, 2: 98ms, 3: 2s
+ register "PmConfigSlpAMinAssert" = "0x03"
+
+ # Determines if enable Serial IRQ. Values 0: Disabled, 1: Enabled
+ register "SerialIrqConfigSirqEnable" = "0x01"
+
+ # VR Settings Configuration for 5 Domains
+ #+----------------+-------+-------+-------------+-------------+-------+
+ #| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT |
+ #+----------------+-------+-------+-------------+-------------+-------+
+ #| Psi1Threshold | 20A | 20A | 20A | 20A | 20A |
+ #| Psi2Threshold | 4A | 5A | 5A | 5A | 5A |
+ #| Psi3Threshold | 1A | 1A | 1A | 1A | 1A |
+ #| Psi3Enable | 1 | 1 | 1 | 1 | 1 |
+ #| Psi4Enable | 1 | 1 | 1 | 1 | 1 |
+ #| ImonSlope | 0 | 0 | 0 | 0 | 0 |
+ #| ImonOffset | 0 | 0 | 0 | 0 | 0 |
+ #| IccMax | 7A | 34A | 34A | 35A | 35A |
+ #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | 1.52V |
+ #+----------------+-------+-------+-------------+-------------+-------+
+ register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
+ .vr_config_enable = 1, \
+ .psi1threshold = 0x50, \
+ .psi2threshold = 0x14, \
+ .psi3threshold = 0x4, \
+ .psi3enable = 1, \
+ .psi4enable = 1, \
+ .imon_slope = 0x0, \
+ .imon_offset = 0x0, \
+ .icc_max = 0x0, \
+ .voltage_limit = 0x0 \
+ }"
+
+ register "domain_vr_config[VR_IA_CORE]" = "{
+ .vr_config_enable = 1, \
+ .psi1threshold = 0x50, \
+ .psi2threshold = 0x14, \
+ .psi3threshold = 0x4, \
+ .psi3enable = 1, \
+ .psi4enable = 1, \
+ .imon_slope = 0x0, \
+ .imon_offset = 0x0, \
+ .icc_max = 0x0, \
+ .voltage_limit = 0x0 \
+ }"
+ register "domain_vr_config[VR_RING]" = "{
+ .vr_config_enable = 1, \
+ .psi1threshold = 0x50, \
+ .psi2threshold = 0x14, \
+ .psi3threshold = 0x4, \
+ .psi3enable = 1, \
+ .psi4enable = 1, \
+ .imon_slope = 0x0, \
+ .imon_offset = 0x0, \
+ .icc_max = 0x0, \
+ .voltage_limit = 0x0, \
+ }"
+
+ register "domain_vr_config[VR_GT_UNSLICED]" = "{
+ .vr_config_enable = 1, \
+ .psi1threshold = 0x50, \
+ .psi2threshold = 0x14, \
+ .psi3threshold = 0x4, \
+ .psi3enable = 1, \
+ .psi4enable = 1, \
+ .imon_slope = 0x0, \
+ .imon_offset = 0x0, \
+ .icc_max = 0x0 ,\
+ .voltage_limit = 0x0 \
+ }"
+
+ register "domain_vr_config[VR_GT_SLICED]" = "{
+ .vr_config_enable = 1, \
+ .psi1threshold = 0x50, \
+ .psi2threshold = 0x14, \
+ .psi3threshold = 0x4, \
+ .psi3enable = 1, \
+ .psi4enable = 1, \
+ .imon_slope = 0x0, \
+ .imon_offset = 0x0, \
+ .icc_max = 0x0, \
+ .voltage_limit = 0x0 \
+ }"
+
+ register "FspSkipMpInit" = "1"
+
+ # Enable Root ports.
+ register "PcieRpEnable[2]" = "1"
+ register "PcieRpEnable[3]" = "1"
+ register "PcieRpEnable[4]" = "1"
+ register "PcieRpEnable[5]" = "1"
+ register "PcieRpEnable[8]" = "1"
+
+ # Enable CLKREQ#
+ register "PcieRpClkReqSupport[2]" = "1"
+ register "PcieRpClkReqSupport[3]" = "1"
+ register "PcieRpClkReqSupport[4]" = "1"
+ register "PcieRpClkReqSupport[5]" = "1"
+ register "PcieRpClkReqSupport[8]" = "1"
+
+ # RP 9 uses SRCCLKREQ5#
+ register "PcieRpClkReqNumber[2]" = "5"
+ register "PcieRpClkReqNumber[3]" = "2"
+ register "PcieRpClkReqNumber[4]" = "3"
+ register "PcieRpClkReqNumber[5]" = "4"
+ register "PcieRpClkReqNumber[8]" = "1"
+
+
+ # USB 2.0 Enable all ports
+ register "usb2_ports[0]" = "USB2_PORT_MAX(OC0)" # TYPE-A Port
+ register "usb2_ports[1]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port
+ register "usb2_ports[2]" = "USB2_PORT_MAX(OC_SKIP)" # Bluetooth
+ register "usb2_ports[4]" = "USB2_PORT_MAX(OC1)" # Type-A Port
+ register "usb2_ports[5]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port
+ register "usb2_ports[6]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port
+ register "usb2_ports[7]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port
+ register "usb2_ports[8]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port
+ register "usb2_ports[9]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port
+ register "usb2_ports[10]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port
+ register "usb2_ports[11]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port
+
+ # USB 3.0 Enable Port 1-4. Port 5 & 6 Disabled
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # TYPE-A Port
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port
+ register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port
+ register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" # TYPE-A Port
+ register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC2)" # TYPE-A Port
+ register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port
+
+ register "SerialIoDevMode" = "{ \
+ [PchSerialIoIndexI2C0] = PchSerialIoPci, \
+ [PchSerialIoIndexI2C1] = PchSerialIoPci, \
+ [PchSerialIoIndexI2C2] = PchSerialIoDisabled, \
+ [PchSerialIoIndexI2C3] = PchSerialIoDisabled, \
+ [PchSerialIoIndexI2C4] = PchSerialIoPci, \
+ [PchSerialIoIndexI2C5] = PchSerialIoDisabled, \
+ [PchSerialIoIndexSpi0] = PchSerialIoDisabled, \
+ [PchSerialIoIndexSpi1] = PchSerialIoDisabled, \
+ [PchSerialIoIndexUart0] = PchSerialIoPci, \
+ [PchSerialIoIndexUart1] = PchSerialIoDisabled, \
+ [PchSerialIoIndexUart2] = PchSerialIoSkipInit, \
+ }"
+
+ # Send an extra VR mailbox command for the PS4 exit issue
+ register "SendVrMbxCmd" = "2"
+
+ # Enable/Disable VMX feature
+ register "VmxEnable" = "0"
+
+ # Use default SD card detect GPIO configuration
+ register "sdcard_cd_gpio_default" = "GPP_G5"
+
+ device cpu_cluster 0 on
+ device lapic 0 on end
+ end
+ device domain 0 on
+ device pci 00.0 on end # Host Bridge
+ device pci 02.0 on end # Integrated Graphics Device
+ device pci 14.0 on end # USB xHCI
+ device pci 14.1 off end # USB xDCI (OTG)
+ device pci 14.2 on end # Thermal Subsystem
+ device pci 15.0 on end # I2C #0
+ device pci 15.1 on end # I2C #1
+ device pci 15.2 off end # I2C #2
+ device pci 15.3 off end # I2C #3
+ device pci 16.0 on end # Management Engine Interface 1
+ device pci 16.1 off end # Management Engine Interface 2
+ device pci 16.2 off end # Management Engine IDE-R
+ device pci 16.3 off end # Management Engine KT Redirection
+ device pci 16.4 off end # Management Engine Interface 3
+ device pci 17.0 on end # SATA
+ device pci 19.0 on end # UART #2
+ device pci 19.1 off end # I2C #5
+ device pci 19.2 on end #
+ device pci 1c.0 on end # PCI Express Port 1
+ device pci 1c.1 off end # PCI Express Port 2
+ device pci 1c.2 on end # PCI Express Port 3
+ device pci 1c.3 on end # PCI Express Port 4
+ device pci 1c.4 on end # PCI Express Port 5
+ device pci 1c.5 on end # PCI Express Port 6
+ device pci 1c.6 off end # PCI Express Port 7
+ device pci 1c.7 off end # PCI Express Port 8
+ device pci 1d.0 on end # PCI Express Port 9
+ device pci 1d.1 off end # PCI Express Port 10
+ device pci 1d.2 off end # PCI Express Port 11
+ device pci 1d.3 off end # PCI Express Port 12
+ device pci 1e.0 on end # UART #0
+ device pci 1e.1 off end # UART #1
+ device pci 1e.2 off end # GSPI #0
+ device pci 1e.3 off end # GSPI #1
+ device pci 1e.4 on end # eMMC
+ device pci 1e.5 off end # SDIO
+ device pci 1e.6 on end # SDCard
+ device pci 1f.0 on
+ chip drivers/pc80/tpm
+ device pnp 0c31.0 on end
+ end
+ end # LPC Interface
+ device pci 1f.1 on end # P2SB
+ device pci 1f.2 on end # Power Management Controller
+ device pci 1f.3 on end # Intel HDA
+ device pci 1f.4 on end # SMBus
+ device pci 1f.5 on end # PCH SPI
+ device pci 1f.6 off end # GbE
+ end
+end
diff --git a/src/mainboard/intel/kblrvp/variants/rvp7/include/variant/gpio.h b/src/mainboard/intel/kblrvp/variants/rvp7/include/variant/gpio.h
new file mode 100644
index 0000000000..7a8314ee4f
--- /dev/null
+++ b/src/mainboard/intel/kblrvp/variants/rvp7/include/variant/gpio.h
@@ -0,0 +1,221 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2013 Google Inc.
+ * Copyright (C) 2015 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _GPIORVP7_H
+#define _GPIORVP7_H
+
+#include <soc/gpe.h>
+#include <soc/gpio.h>
+
+/* TCA6424A I/O Expander */
+#define IO_EXPANDER_BUS 4
+#define IO_EXPANDER_0_ADDR 0x22
+#define IO_EXPANDER_P0CONF 0x0C /* Port 0 conf offset */
+#define IO_EXPANDER_P0DOUT 0x04 /* Port 0 data offset */
+#define IO_EXPANDER_P1CONF 0x0D
+#define IO_EXPANDER_P1DOUT 0x05
+#define IO_EXPANDER_P2CONF 0x0E
+#define IO_EXPANDER_P2DOUT 0x06
+#define IO_EXPANDER_1_ADDR 0x23
+
+
+/* GPE_EC_WAKE */
+#define GPE_EC_WAKE GPE0_LAN_WAK
+
+/* CHROMEEC in RVP */
+#define EC_SCI_GPI GPP_E16
+#define EC_SMI_GPI GPP_E15
+/*
+ * Gpio based irq for touchpad, 18th index in North Bank
+ * MAX_DIRECT_IRQ + GPSW_SIZE + 19
+ */
+#define KBLRVP_TOUCHPAD_IRQ 33
+
+#define KBLRVP_TOUCH_IRQ 31
+
+#define BOARD_TOUCHPAD_NAME "touchpad"
+#define BOARD_TOUCHPAD_IRQ KBLRVP_TOUCHPAD_IRQ
+#define BOARD_TOUCHPAD_I2C_BUS 0
+#define BOARD_TOUCHPAD_I2C_ADDR 0x20
+
+#define BOARD_TOUCHSCREEN_NAME "touchscreen"
+#define BOARD_TOUCHSCREEN_IRQ KBLRVP_TOUCH_IRQ
+#define BOARD_TOUCHSCREEN_I2C_BUS 0
+#define BOARD_TOUCHSCREEN_I2C_ADDR 0x4c
+
+#ifndef __ACPI__
+
+/* Pad configuration in ramstage. */
+static const struct pad_config gpio_table[] = {
+/* PM_SLP_S0ix_R_N*/ PAD_CFG_GPO(GPP_A7, 1, DEEP),
+/* LPC_CLKRUN */ PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1),
+/* PCH_CLK_PCI_TPM */ PAD_CFG_NF(GPP_A10, NONE, DEEP, NF1),
+/* PCH_LPC_CLK */ PAD_CFG_GPI_APIC(GPP_A11, NONE, DEEP),
+/* ISH_KB_PROX_INT */ PAD_CFG_GPO(GPP_A12, 1, RSMRST),
+/* PCH_SUSPWRACB */ PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1),
+/* PCH_SUSACK */ PAD_CFG_NF(GPP_A15, 20K_PD, DEEP, NF1),
+/* SD_1P8_SEL */ PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1),
+/* SD_PWR_EN */ PAD_CFG_NF(GPP_A17, NONE, DEEP, NF1),
+/* ACCEL INTERRUPT */ PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1),
+/* ISH_GP1 */ PAD_CFG_NF(GPP_A19, NONE, DEEP, NF1),
+/* GYRO_DRDY */ PAD_CFG_NF(GPP_A20, NONE, DEEP, NF1),
+/* FLIP_ACCEL_INT */ PAD_CFG_NF(GPP_A21, NONE, DEEP, NF1),
+/* GYRO_INT */ PAD_CFG_GPO(GPP_A22, 1, DEEP),
+/* ISH_GP5 */ PAD_CFG_GPI_APIC(GPP_A23, NONE, DEEP),
+/* CORE_VID0 */ PAD_CFG_NF(GPP_B0, NONE, DEEP, NF1),
+/* CORE_VID1 */ PAD_CFG_NF(GPP_B1, NONE, DEEP, NF1),
+/* HSJ_MIC_DET */ PAD_CFG_NF(GPP_B2, NONE, DEEP, NF1),
+/* TRACKPAD_INT */ PAD_CFG_GPI_APIC(GPP_B3, NONE, PLTRST),
+/* BT_RF_KILL */ PAD_CFG_GPO(GPP_B4, 1, DEEP),
+/* SRCCLKREQ0# */ PAD_CFG_GPI_APIC(GPP_B5, NONE, DEEP),
+/* MPHY_EXT_PWR_GATE */ PAD_CFG_NF(GPP_B11, NONE, DEEP, NF1),
+/* PM_SLP_S0 */ PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1),
+/* PCH_PLT_RST */ PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1),
+/* GPP_B_14_SPKR */ PAD_CFG_TERM_GPO(GPP_B14, 1, 20K_PD, DEEP),
+/* WLAN_PCIE_WAKE */ PAD_CFG_GPI_ACPI_SCI(GPP_B16, NONE, PLTRST, YES),
+/* TBT_CIO_PLUG_EVT */ PAD_CFG_GPI_ACPI_SCI(GPP_B17, 20K_PU, PLTRST, YES),
+/* PCH_SLOT1_WAKE_N */ PAD_CFG_GPI_ACPI_SCI(GPP_B18, 20K_PU, PLTRST, YES),
+/* CCODEC_SPI_CS */ PAD_CFG_NF(GPP_B19, NONE, DEEP, NF1),
+/* CODEC_SPI_CLK */ PAD_CFG_NF(GPP_B20, 20K_PD, DEEP, NF1),
+/* CODEC_SPI_MISO */ PAD_CFG_NF(GPP_B21, 20K_PD, DEEP, NF1),
+/* CODEC_SPI_MOSI */ PAD_CFG_NF(GPP_B22, 20K_PD, DEEP, NF1),
+/* SM1ALERT# */ PAD_CFG_TERM_GPO(GPP_B23, 1, 20K_PD, DEEP),
+/* SMB_CLK */ PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1),
+/* SMB_DATA */ PAD_CFG_NF(GPP_C1, 20K_PD, DEEP, NF1),
+/* SMBALERT# */ PAD_CFG_TERM_GPO(GPP_C2, 1, 20K_PD, DEEP),
+/* M2_WWAN_PWREN */ PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1),
+/* SML0DATA */ PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1),
+/* SML0ALERT# */ PAD_CFG_GPI_APIC(GPP_C5, 20K_PD, DEEP),
+/* EC_IN_RW */ PAD_CFG_NF(GPP_C6, NONE, DEEP, NF1),
+/* USB_CTL */ PAD_CFG_NF(GPP_C7, 20K_PD, DEEP, NF1),
+/* UART0_RXD */ PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1),
+/* UART0_TXD */ PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1),
+/* NFC_RST* */ PAD_CFG_NF(GPP_C10, NONE, DEEP, NF1),
+/* EN_PP3300_KEPLER */ PAD_CFG_NF(GPP_C11, NONE, DEEP, NF1),
+/* PCH_MEM_CFG0 */ PAD_CFG_NF(GPP_C12, NONE, DEEP, NF1),
+/* PCH_MEM_CFG1 */ PAD_CFG_NF(GPP_C13, NONE, DEEP, NF1),
+/* PCH_MEM_CFG2 */ PAD_CFG_NF(GPP_C14, NONE, DEEP, NF1),
+/* PCH_MEM_CFG3 */ PAD_CFG_NF(GPP_C15, NONE, DEEP, NF1),
+/* I2C0_SDA */ PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1),
+/* I2C0_SCL */ PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1),
+/* I2C1_SDA */ PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1),
+/* I2C1_SCL */ PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1),
+/* GD_UART2_RXD */ PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1),
+/* GD_UART2_TXD */ PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1),
+/* TCH_PNL_PWREN */ PAD_CFG_NF(GPP_C22, NONE, DEEP, NF1),
+/* SPI_WP_STATUS */ PAD_CFG_NF(GPP_C23, NONE, DEEP, NF1),
+/* ITCH_SPI_CS */ PAD_CFG_NF(GPP_D0, NONE, DEEP, NF1),
+/* ITCH_SPI_CLK */ PAD_CFG_NF(GPP_D1, NONE, DEEP, NF1),
+/* ITCH_SPI_MISO_1 */ PAD_CFG_NF(GPP_D2, NONE, DEEP, NF1),
+/* ITCH_SPI_MISO_0 */ PAD_CFG_NF(GPP_D3, NONE, DEEP, NF1),
+/* CAM_FLASH_STROBE */ PAD_CFG_NF(GPP_D4, NONE, DEEP, NF1),
+/* EN_PP3300_DX_EMMC */ PAD_CFG_NF(GPP_D5, NONE, DEEP, NF1),
+/* EN_PP1800_DX_EMMC */ PAD_CFG_NF(GPP_D6, NONE, DEEP, NF1),
+/* SH_I2C1_SDA */ PAD_CFG_NF(GPP_D7, NONE, DEEP, NF1),
+/* SH_I2C1_SCL */ PAD_CFG_NF(GPP_D8, NONE, DEEP, NF1),
+ PAD_CFG_GPI(GPP_D9, NONE, DEEP),
+/* SD_D3_WAKE */ PAD_CFG_GPI(GPP_D10, NONE, DEEP),
+/* USB_A1_ILIM_SEL */ PAD_CFG_GPI(GPP_D11, NONE, DEEP),
+/* EN_PP3300_DX_CAM */ PAD_CFG_GPI(GPP_D12, NONE, DEEP),
+/* EN_PP1800_DX_AUDIO */PAD_CFG_NF(GPP_D13, NONE, DEEP, NF1),
+/* ISH_UART0_TXD */ PAD_CFG_NF(GPP_D14, NONE, DEEP, NF1),
+/* ISH_UART0_RTS */ PAD_CFG_NF(GPP_D15, NONE, DEEP, NF1),
+/* ISH_UART0_CTS */ PAD_CFG_NF(GPP_D16, NONE, DEEP, NF1),
+/* DMIC_CLK_1 */ PAD_CFG_NF(GPP_D17, NONE, DEEP, NF1),
+/* DMIC_DATA_1 */ PAD_CFG_NF(GPP_D18, 20K_PD, DEEP, NF1),
+/* DMIC_CLK_0 */ PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1),
+/* DMIC_DATA_0 */ PAD_CFG_NF(GPP_D20, 20K_PD, DEEP, NF1),
+/* ITCH_SPI_D2 */ PAD_CFG_NF(GPP_D21, NONE, DEEP, NF1),
+/* ITCH_SPI_D3 */ PAD_CFG_NF(GPP_D22, NONE, DEEP, NF1),
+/* I2S_MCLK */ PAD_CFG_NF(GPP_D23, NONE, DEEP, NF1),
+/* SPI_TPM_IRQ */ PAD_CFG_GPI_APIC(GPP_E0, 20K_PD, DEEP),
+/* SATAXPCIE1 */ PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1),
+/* SSD_PEDET */ PAD_CFG_GPI(GPP_E2, NONE, DEEP),
+/* CPU_GP0 */ PAD_CFG_GPO(GPP_E3, 1, RSMRST),
+/* SATA_DEVSLP1 */ PAD_CFG_NF(GPP_E5, NONE, DEEP, NF1),
+/* SATA_DEVSLP2 */ PAD_CFG_NF(GPP_E6, NONE, DEEP, NF1),
+ PAD_CFG_NF(GPP_E8, NONE, DEEP, NF1),
+/* USB2_OC_0 */ PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1),
+/* USB2_OC_1 */ PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1),
+/* USB2_OC_2 */ PAD_CFG_NF(GPP_E11, NONE, DEEP, NF1),
+/* DDI1_HPD */ PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1),
+/* DDI2_HPD */ PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1),
+/* EC_SMI */ PAD_CFG_GPI_ACPI_SMI(GPP_E15, NONE, DEEP, YES),
+/* EC_SCI */ PAD_CFG_GPI_ACPI_SCI(GPP_E16, NONE, PLTRST, YES),
+/* EDP_HPD */ PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1),
+/* DDPB_CTRLCLK */ PAD_CFG_NF(GPP_E18, NONE, DEEP, NF1),
+/* DDPB_CTRLDATA */ PAD_CFG_NF(GPP_E19, 20K_PD, DEEP, NF1),
+/* DDPC_CTRLCLK */ PAD_CFG_NF(GPP_E20, NONE, DEEP, NF1),
+/* DDPC_CTRLDATA */ PAD_CFG_NF(GPP_E21, NONE, DEEP, NF1),
+/* PCH_CODEC_IRQ */ PAD_CFG_GPI_APIC(GPP_E22, NONE, DEEP),
+/* TCH_PNL_RST */ PAD_CFG_TERM_GPO(GPP_E23, 1, 20K_PD, DEEP),
+/* I2S2_SCLK */ PAD_CFG_NF(GPP_F0, NONE, DEEP, NF1),
+/* I2S2_SFRM */ PAD_CFG_NF(GPP_F1, NONE, DEEP, NF1),
+/* I2S2_TXD */ PAD_CFG_NF(GPP_F2, NONE, DEEP, NF1),
+/* I2S2_RXD */ PAD_CFG_NF(GPP_F3, NONE, DEEP, NF1),
+/* I2C2_SDA */ PAD_CFG_NF(GPP_F4, NONE, DEEP, NF1),
+/* I2C2_SCL */ PAD_CFG_NF(GPP_F5, NONE, DEEP, NF1),
+/* I2C3_SDA */ PAD_CFG_NF(GPP_F6, NONE, DEEP, NF1),
+/* I2C3_SCL */ PAD_CFG_NF(GPP_F7, NONE, DEEP, NF1),
+/* I2C4_SDA */ PAD_CFG_NF(GPP_F8, NONE, DEEP, NF1),
+/* I2C4_SDA */ PAD_CFG_NF(GPP_F9, NONE, DEEP, NF1),
+/* AUDIO_IRQ */ PAD_CFG_NF(GPP_F10, NONE, DEEP, NF2),
+/* I2C5_SCL */ PAD_CFG_NF(GPP_F11, NONE, DEEP, NF2),
+/* EMMC_CMD */ PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1),
+/* EMMC_DATA0 */ PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1),
+/* EMMC_DATA1 */ PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1),
+/* EMMC_DATA2 */ PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1),
+/* EMMC_DATA3 */ PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1),
+/* EMMC_DATA4 */ PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1),
+/* EMMC_DATA5 */ PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1),
+/* EMMC_DATA6 */ PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1),
+/* EMMC_DATA7 */ PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1),
+/* EMMC_RCLK */ PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1),
+/* EMMC_CLK */ PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1),
+/* WWAN_UIM_SIM_DET */ PAD_CFG_GPI_APIC(GPP_F23, NONE, DEEP),
+/* SD_CMD */ PAD_CFG_NF(GPP_G0, NONE, DEEP, NF1),
+/* SD_DATA0 */ PAD_CFG_NF(GPP_G1, NONE, DEEP, NF1),
+/* SD_DATA1 */ PAD_CFG_NF(GPP_G2, NONE, DEEP, NF1),
+/* SD_DATA2 */ PAD_CFG_NF(GPP_G3, NONE, DEEP, NF1),
+/* SD_DATA3 */ PAD_CFG_NF(GPP_G4, NONE, DEEP, NF1),
+/* SD_CD# */ PAD_CFG_NF(GPP_G5, NONE, DEEP, NF1),
+/* SD_CLK */ PAD_CFG_NF(GPP_G6, NONE, DEEP, NF1),
+/* SD_WP */ PAD_CFG_NF(GPP_G7, NONE, DEEP, NF1),
+/* PCH_BATLOW */ PAD_CFG_NF(GPD0, NONE, DEEP, NF1),
+/* EC_PCH_ACPRESENT */ PAD_CFG_NF(GPD1, NONE, DEEP, NF1),
+/* EC_PCH_WAKE */ PAD_CFG_NF(GPD2, NONE, DEEP, NF1),
+/* EC_PCH_PWRBTN */ PAD_CFG_NF(GPD3, 20K_PU, DEEP, NF1),
+/* PM_SLP_S3# */ PAD_CFG_NF(GPD4, NONE, DEEP, NF1),
+/* PM_SLP_S4# */ PAD_CFG_NF(GPD5, NONE, DEEP, NF1),
+/* PM_SLP_SA# */ PAD_CFG_NF(GPD6, NONE, DEEP, NF1),
+ PAD_CFG_NF(GPD7, NONE, DEEP, NF1),
+/* PM_SUSCLK */ PAD_CFG_NF(GPD8, NONE, DEEP, NF1),
+/* PCH_SLP_WLAN# */ PAD_CFG_NF(GPD9, NONE, DEEP, NF1),
+/* PM_SLP_S5# */ PAD_CFG_NF(GPD10, NONE, DEEP, NF1),
+/* LANPHYC */ PAD_CFG_NF(GPD11, NONE, DEEP, NF1),
+};
+
+/* Early pad configuration in romstage. */
+static const struct pad_config early_gpio_table[] = {
+/* UART0_RXD */ PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1),
+/* UART0_TXD */ PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1),
+};
+
+
+#endif
+
+#endif
+