diff options
Diffstat (limited to 'src/mainboard/intel/sklrvp/devicetree.cb')
| -rw-r--r-- | src/mainboard/intel/sklrvp/devicetree.cb | 164 |
1 files changed, 164 insertions, 0 deletions
diff --git a/src/mainboard/intel/sklrvp/devicetree.cb b/src/mainboard/intel/sklrvp/devicetree.cb new file mode 100644 index 0000000000..6cae727001 --- /dev/null +++ b/src/mainboard/intel/sklrvp/devicetree.cb @@ -0,0 +1,164 @@ +chip soc/intel/skylake + + # SerialIO device modes + register "SerialIoDevMode" = "{ \ + [PchSerialIoIndexI2C0] = PchSerialIoPci, \ + [PchSerialIoIndexI2C1] = PchSerialIoPci, \ + [PchSerialIoIndexI2C2] = PchSerialIoPci, \ + [PchSerialIoIndexI2C3] = PchSerialIoPci, \ + [PchSerialIoIndexI2C4] = PchSerialIoPci, \ + [PchSerialIoIndexI2C5] = PchSerialIoPci, \ + [PchSerialIoIndexSpi0] = PchSerialIoPci, \ + [PchSerialIoIndexSpi1] = PchSerialIoPci, \ + [PchSerialIoIndexUart0] = PchSerialIoPci, \ + [PchSerialIoIndexUart1] = PchSerialIoPci, \ + [PchSerialIoIndexUart2] = PchSerialIoLegacyUart, \ + }" + + # Enable eDP Hotplug with 6ms pulse + register "gpu_dp_d_hotplug" = "0x06" + + # Enable DDI1 Hotplug with 6ms pulse + register "gpu_dp_b_hotplug" = "0x06" + + # Enable DDI2 Hotplug with 6ms pulse + register "gpu_dp_c_hotplug" = "0x06" + + # Set backlight PWM values for eDP + register "gpu_cpu_backlight" = "0x00000200" + register "gpu_pch_backlight" = "0x04000000" + + # Enable Panel and configure power delays + register "gpu_panel_port_select" = "1" # eDP + register "gpu_panel_power_cycle_delay" = "6" # 500ms + register "gpu_panel_power_up_delay" = "2000" # 200ms + register "gpu_panel_power_down_delay" = "500" # 50ms + register "gpu_panel_power_backlight_on_delay" = "2000" # 200ms + register "gpu_panel_power_backlight_off_delay" = "2000" # 200ms + + register "pirqa_routing" = "0x8b" + register "pirqb_routing" = "0x8a" + register "pirqc_routing" = "0x8b" + register "pirqd_routing" = "0x8b" + register "pirqe_routing" = "0x80" + register "pirqf_routing" = "0x80" + register "pirqg_routing" = "0x80" + register "pirqh_routing" = "0x80" + + # EC range is 0x800-0x9ff + register "gen1_dec" = "0x00fc0801" + register "gen2_dec" = "0x00fc0901" + + # EC_SMI + register "ec_smi_gpio" = "34" + register "alt_gp_smi_en" = "0x0400" + register "gpe0_en_1" = "0x00000000" + # EC_SCI is GPIO36 + register "gpe0_en_2" = "0x00000010" + register "gpe0_en_3" = "0x00000000" + register "gpe0_en_4" = "0x00000000" + + # Force enable ASPM for PCIe Port 3 + register "pcie_port_force_aspm" = "0x04" + register "pcie_port_coalesce" = "1" + + # Disable PCIe CLKOUT 1-5 and CLKOUT_XDP + register "icc_clock_disable" = "0x013b0000" + + # Enable S0ix + register "s0ix_enable" = "0" + + # Memory related + register "IedSize" = "0x0" + + # Probeless Trace function + register "ProbelessTrace" = "0" + + # Lan + register "EnableLan" = "0" + + # SATA related + register "EnableSata" = "0" + register "SataSalpSupport" = "0" + register "SataMode" = "0" + register "SataPortsEnable[0]" = "0" + + # Audio related + register "EnableAzalia" = "1" + register "EnableTraceHub" = "0" + register "DspEnable" = "1" + + # I/O Buffer Ownership: + # 0: HD-A Link + # 1 Shared, HD-A Link and I2S Port + # 3: I2S Ports + register "IoBufferOwnership" = "3" + + # USB related + register "SsicPortEnable" = "0" + + # SMBUS + register "SmbusEnable" = "1" + + # Camera + register "Cio2Enable" = "0" + + # eMMC + register "ScsEmmcEnabled" = "1" + register "ScsEmmcHs400Enabled" = "0" + register "ScsSdCardEnabled" = "2" + + # Integrated Sensor + register "IshEnable" = "0" + + # XDCI controller + register "XdciEnable" = "0" + + device cpu_cluster 0 on + device lapic 0 on end + end + device domain 0 on + # Refered from SKL EDS Vol 1 : Page No: 31-32 + device pci 00.0 on end # Host Bridge + device pci 02.0 on end # Integrated Graphics Device + device pci 14.0 on end # USB 3.0 xHCI Controller + device pci 14.1 off end # USB Device Controller (OTG) + device pci 14.2 on end # Thermal Subsystem + device pci 15.0 on end # I2C Controller #0 + device pci 15.1 on end # I2C Controller #1 + device pci 15.2 on end # I2C Controller #2 + device pci 15.3 on end # I2C Controller #3 + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE Redirection (IDE-R) + device pci 16.3 off end # Management Engine Keyboard and Text (KT) Redirection + device pci 16.4 off end # Management Engine Intel MEI #3 + device pci 17.0 off end # SATA Controller + device pci 19.0 on end # UART Controller #2 + device pci 19.1 on end # I2C Controller #5 + device pci 19.2 on end # I2C Controller #4 + device pci 1c.0 off end # PCI Express Port 1 + device pci 1c.1 off end # PCI Express Port 2 + device pci 1c.2 off end # PCI Express Port 3 + device pci 1c.3 off end # PCI Express Port 4 + device pci 1c.4 off end # PCI Express Port 5 + device pci 1c.5 off end # PCI Express Port 6 + device pci 1c.6 off end # PCI Express Port 7 + device pci 1c.7 off end # PCI Express Port 8 + device pci 1d.0 on end # PCI Express Port 9 + device pci 1d.1 off end # PCI Express Port 10 + device pci 1d.2 off end # PCI Express Port 11 + device pci 1d.3 off end # PCI Express Port 12 + device pci 1e.0 on end # UART #0 + device pci 1e.1 on end # UART #1 + device pci 1e.2 on end # SPI #0 + device pci 1e.4 on end # eMMC + device pci 1e.5 off end # SDIO + device pci 1e.6 on end # SDCard + device pci 1f.0 on end # LPC Interface (eSPI Enable Strap = 0) eSPI Interface (eSPI Enable Strap = 1) + device pci 1f.3 on end # Intel High Definition Audio (Intel HD Audio) (Audio, Voice, Speech) + device pci 1f.4 off end # SMBus Controller + device pci 1f.5 on end # SPI + device pci 1f.6 off end # GbE Controller + end +end |