summaryrefslogtreecommitdiff
path: root/src/mainboard/intel
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/intel')
-rw-r--r--src/mainboard/intel/Kconfig6
-rw-r--r--src/mainboard/intel/jarrell/Kconfig39
-rw-r--r--src/mainboard/intel/jarrell/board_info.txt3
-rw-r--r--src/mainboard/intel/jarrell/cmos.layout80
-rw-r--r--src/mainboard/intel/jarrell/debug.c262
-rw-r--r--src/mainboard/intel/jarrell/devicetree.cb80
-rw-r--r--src/mainboard/intel/jarrell/irq_tables.c42
-rw-r--r--src/mainboard/intel/jarrell/jarrell_fixups.c116
-rw-r--r--src/mainboard/intel/jarrell/mptable.c238
-rw-r--r--src/mainboard/intel/jarrell/power_reset_check.c22
-rw-r--r--src/mainboard/intel/jarrell/romstage.c110
-rw-r--r--src/mainboard/intel/jarrell/watchdog.c139
-rw-r--r--src/mainboard/intel/xe7501devkit/Kconfig33
-rw-r--r--src/mainboard/intel/xe7501devkit/acpi_tables.c89
-rw-r--r--src/mainboard/intel/xe7501devkit/board_info.txt1
-rw-r--r--src/mainboard/intel/xe7501devkit/bus.h16
-rw-r--r--src/mainboard/intel/xe7501devkit/devicetree.cb73
-rw-r--r--src/mainboard/intel/xe7501devkit/dsdt.asl16
-rw-r--r--src/mainboard/intel/xe7501devkit/fadt.c166
-rw-r--r--src/mainboard/intel/xe7501devkit/ioapic.h11
-rw-r--r--src/mainboard/intel/xe7501devkit/irq_tables.c74
-rw-r--r--src/mainboard/intel/xe7501devkit/mptable.c142
-rw-r--r--src/mainboard/intel/xe7501devkit/romstage.c76
23 files changed, 0 insertions, 1834 deletions
diff --git a/src/mainboard/intel/Kconfig b/src/mainboard/intel/Kconfig
index d2dd7ce014..a51dc02410 100644
--- a/src/mainboard/intel/Kconfig
+++ b/src/mainboard/intel/Kconfig
@@ -17,8 +17,6 @@ config BOARD_INTEL_EAGLEHEIGHTS
bool "EagleHeights"
config BOARD_INTEL_EMERALDLAKE2
bool "Emerald Lake 2 CRB"
-config BOARD_INTEL_JARRELL
- bool "Jarrell (SE7520JR2)"
config BOARD_INTEL_MINNOWMAX
bool "Minnow Max"
config BOARD_INTEL_MOHONPEAK
@@ -27,8 +25,6 @@ config BOARD_INTEL_MTARVON
bool "3100 devkit (Mt. Arvon)"
config BOARD_INTEL_TRUXTON
bool "EP80579 devkit (Truxton)"
-config BOARD_INTEL_XE7501DEVKIT
- bool "XE7501devkit"
config BOARD_INTEL_BASKING_RIDGE
bool "Basking Ridge CRB"
config BOARD_INTEL_WTM2
@@ -44,12 +40,10 @@ source "src/mainboard/intel/d945gclf/Kconfig"
source "src/mainboard/intel/eagleheights/Kconfig"
source "src/mainboard/intel/emeraldlake2/Kconfig"
source "src/mainboard/intel/baskingridge/Kconfig"
-source "src/mainboard/intel/jarrell/Kconfig"
source "src/mainboard/intel/minnowmax/Kconfig"
source "src/mainboard/intel/mohonpeak/Kconfig"
source "src/mainboard/intel/mtarvon/Kconfig"
source "src/mainboard/intel/truxton/Kconfig"
-source "src/mainboard/intel/xe7501devkit/Kconfig"
source "src/mainboard/intel/wtm2/Kconfig"
config MAINBOARD_VENDOR
diff --git a/src/mainboard/intel/jarrell/Kconfig b/src/mainboard/intel/jarrell/Kconfig
deleted file mode 100644
index 6ecbc870f1..0000000000
--- a/src/mainboard/intel/jarrell/Kconfig
+++ /dev/null
@@ -1,39 +0,0 @@
-if BOARD_INTEL_JARRELL
-
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select CPU_INTEL_SOCKET_MPGA604
- select NORTHBRIDGE_INTEL_E7520
- select SOUTHBRIDGE_INTEL_PXHD
- select SOUTHBRIDGE_INTEL_I82801EX
- select SUPERIO_NSC_PC87427
- select ROMCC
- select HAVE_OPTION_TABLE
- select HAVE_PIRQ_TABLE
- select HAVE_MP_TABLE
- select UDELAY_TSC
- select USE_WATCHDOG_ON_BOOT
- select DRIVERS_ATI_RAGEXL
- select BOARD_ROMSIZE_KB_2048
-
-config MAINBOARD_DIR
- string
- default intel/jarrell
-
-config MAINBOARD_PART_NUMBER
- string
- default "Jarrell"
-
-config MAX_CPUS
- int
- default 4
-
-config IRQ_SLOT_COUNT
- int
- default 18
-
-config DIMM_MAP_LOGICAL
- hex
- default 0x0124
-
-endif # BOARD_INTEL_JARRELL
diff --git a/src/mainboard/intel/jarrell/board_info.txt b/src/mainboard/intel/jarrell/board_info.txt
deleted file mode 100644
index e62a179078..0000000000
--- a/src/mainboard/intel/jarrell/board_info.txt
+++ /dev/null
@@ -1,3 +0,0 @@
-Board name: Jarrell (SE7520JR2)
-Category: server
-Board URL: http://www.intel.com/support/motherboards/server/se7520jr2/
diff --git a/src/mainboard/intel/jarrell/cmos.layout b/src/mainboard/intel/jarrell/cmos.layout
deleted file mode 100644
index 16c2ba447a..0000000000
--- a/src/mainboard/intel/jarrell/cmos.layout
+++ /dev/null
@@ -1,80 +0,0 @@
-entries
-
-#start-bit length config config-ID name
-#0 8 r 0 seconds
-#8 8 r 0 alarm_seconds
-#16 8 r 0 minutes
-#24 8 r 0 alarm_minutes
-#32 8 r 0 hours
-#40 8 r 0 alarm_hours
-#48 8 r 0 day_of_week
-#56 8 r 0 day_of_month
-#64 8 r 0 month
-#72 8 r 0 year
-#80 4 r 0 rate_select
-#84 3 r 0 REF_Clock
-#87 1 r 0 UIP
-#88 1 r 0 auto_switch_DST
-#89 1 r 0 24_hour_mode
-#90 1 r 0 binary_values_enable
-#91 1 r 0 square-wave_out_enable
-#92 1 r 0 update_finished_enable
-#93 1 r 0 alarm_interrupt_enable
-#94 1 r 0 periodic_interrupt_enable
-#95 1 r 0 disable_clock_updates
-#96 288 r 0 temporary_filler
-0 376 r 0 reserved_memory
-376 1 e 1 power_up_watchdog
-384 1 e 4 boot_option
-385 1 e 4 last_boot
-386 1 e 1 ECC_memory
-388 4 r 0 reboot_bits
-392 3 e 5 baud_rate
-395 1 e 2 hyper_threading
-397 1 e 1 pxhd_bus_speed_100
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-416 4 e 7 boot_first
-420 4 e 7 boot_second
-424 4 e 7 boot_third
-428 4 h 0 boot_index
-432 8 h 0 boot_countdown
-728 256 h 0 user_data
-984 16 h 0 check_sum
-# Reserve the extended AMD configuration registers
-1000 24 r 0 amd_reserved
-
-
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-5 0 115200
-5 1 57600
-5 2 38400
-5 3 19200
-5 4 9600
-5 5 4800
-5 6 2400
-5 7 1200
-6 6 Notice
-6 7 Info
-6 8 Debug
-6 9 Spew
-7 0 Network
-7 1 HDD
-7 2 Floppy
-7 8 Fallback_Network
-7 9 Fallback_HDD
-7 10 Fallback_Floppy
-#7 3 ROM
-
-checksums
-
-checksum 392 983 984
diff --git a/src/mainboard/intel/jarrell/debug.c b/src/mainboard/intel/jarrell/debug.c
deleted file mode 100644
index b92a75d76c..0000000000
--- a/src/mainboard/intel/jarrell/debug.c
+++ /dev/null
@@ -1,262 +0,0 @@
-#include <spd.h>
-
-static void print_reg(unsigned char index)
-{
- unsigned char data;
-
- outb(index, 0x2e);
- data = inb(0x2f);
- print_debug("0x");
- print_debug_hex8(index);
- print_debug(": 0x");
- print_debug_hex8(data);
- print_debug("\n");
- return;
-}
-
-static void xbus_en(void)
-{
- /* select the XBUS function in the SIO */
- outb(0x07, 0x2e);
- outb(0x0f, 0x2f);
- outb(0x30, 0x2e);
- outb(0x01, 0x2f);
- return;
-}
-
-static void setup_func(unsigned char func)
-{
- /* select the function in the SIO */
- outb(0x07, 0x2e);
- outb(func, 0x2f);
- /* print out the regs */
- print_reg(0x30);
- print_reg(0x60);
- print_reg(0x61);
- print_reg(0x62);
- print_reg(0x63);
- print_reg(0x70);
- print_reg(0x71);
- print_reg(0x74);
- print_reg(0x75);
- return;
-}
-
-static void siodump(void)
-{
- int i;
- unsigned char data;
-
- print_debug("\n*** SERVER I/O REGISTERS ***\n");
- for (i=0x10; i<=0x2d; i++) {
- print_reg((unsigned char)i);
- }
-#if 0
- print_debug("\n*** XBUS REGISTERS ***\n");
- setup_func(0x0f);
- for (i=0xf0; i<=0xff; i++) {
- print_reg((unsigned char)i);
- }
-
- print_debug("\n*** SERIAL 1 CONFIG REGISTERS ***\n");
- setup_func(0x03);
- print_reg(0xf0);
-
- print_debug("\n*** SERIAL 2 CONFIG REGISTERS ***\n");
- setup_func(0x02);
- print_reg(0xf0);
-
-#endif
- print_debug("\n*** GPIO REGISTERS ***\n");
- setup_func(0x07);
- for (i=0xf0; i<=0xf8; i++) {
- print_reg((unsigned char)i);
- }
- print_debug("\n*** GPIO VALUES ***\n");
- data = inb(0x68a);
- print_debug("\nGPDO 4: 0x");
- print_debug_hex8(data);
- data = inb(0x68b);
- print_debug("\nGPDI 4: 0x");
- print_debug_hex8(data);
- print_debug("\n");
-
-#if 0
-
- print_debug("\n*** WATCHDOG TIMER REGISTERS ***\n");
- setup_func(0x0a);
- print_reg(0xf0);
-
- print_debug("\n*** FAN CONTROL REGISTERS ***\n");
- setup_func(0x09);
- print_reg(0xf0);
- print_reg(0xf1);
-
- print_debug("\n*** RTC REGISTERS ***\n");
- setup_func(0x10);
- print_reg(0xf0);
- print_reg(0xf1);
- print_reg(0xf3);
- print_reg(0xf6);
- print_reg(0xf7);
- print_reg(0xfe);
- print_reg(0xff);
-
- print_debug("\n*** HEALTH MONITORING & CONTROL REGISTERS ***\n");
- setup_func(0x14);
- print_reg(0xf0);
-#endif
- return;
-}
-
-static void dump_bar14(unsigned dev)
-{
- int i;
- unsigned long bar;
-
- print_debug("BAR 14 Dump\n");
-
- bar = pci_read_config32(dev, 0x14);
- for(i = 0; i <= 0x300; i+=4) {
-#if 0
- unsigned char val;
- if ((i & 0x0f) == 0) {
- print_debug_hex8(i);
- print_debug_char(':');
- }
- val = pci_read_config8(dev, i);
-#endif
- if((i%4)==0) {
- print_debug("\n");
- print_debug_hex16(i);
- print_debug_char(' ');
- }
- print_debug_hex32(read32(bar + i));
- print_debug_char(' ');
- }
- print_debug("\n");
-}
-
-#if 0
-static void dump_spd_registers(const struct mem_controller *ctrl)
-{
- int i;
- print_debug("\n");
- for(i = 0; i < 4; i++) {
- unsigned device;
- device = ctrl->channel0[i];
- if (device) {
- int j;
- print_debug("dimm: ");
- print_debug_hex8(i);
- print_debug(".0: ");
- print_debug_hex8(device);
- for(j = 0; j < 256; j++) {
- int status;
- unsigned char byte;
- if ((j & 0xf) == 0) {
- print_debug("\n");
- print_debug_hex8(j);
- print_debug(": ");
- }
- status = smbus_read_byte(device, j);
- if (status < 0) {
- print_debug("bad device\n");
- break;
- }
- byte = status & 0xff;
- print_debug_hex8(byte);
- print_debug_char(' ');
- }
- print_debug("\n");
- }
- device = ctrl->channel1[i];
- if (device) {
- int j;
- print_debug("dimm: ");
- print_debug_hex8(i);
- print_debug(".1: ");
- print_debug_hex8(device);
- for(j = 0; j < 256; j++) {
- int status;
- unsigned char byte;
- if ((j & 0xf) == 0) {
- print_debug("\n");
- print_debug_hex8(j);
- print_debug(": ");
- }
- status = smbus_read_byte(device, j);
- if (status < 0) {
- print_debug("bad device\n");
- break;
- }
- byte = status & 0xff;
- print_debug_hex8(byte);
- print_debug_char(' ');
- }
- print_debug("\n");
- }
- }
-}
-#endif
-
-void dump_spd_registers(void)
-{
- unsigned device;
- device = DIMM0;
- while(device <= DIMM7) {
- int status = 0;
- int i;
- print_debug("\n");
- print_debug("dimm ");
- print_debug_hex8(device);
-
- for(i = 0; (i < 256) ; i++) {
- unsigned char byte;
- if ((i % 16) == 0) {
- print_debug("\n");
- print_debug_hex8(i);
- print_debug(": ");
- }
- status = smbus_read_byte(device, i);
- if (status < 0) {
- print_debug("bad device: ");
- print_debug_hex8(-status);
- print_debug("\n");
- break;
- }
- print_debug_hex8(status);
- print_debug_char(' ');
- }
- device++;
- print_debug("\n");
- }
-}
-
-void dump_ipmi_registers(void)
-{
- unsigned device;
- device = 0x42;
- while(device <= 0x42) {
- int status = 0;
- int i;
- print_debug("\n");
- print_debug("ipmi ");
- print_debug_hex8(device);
-
- for(i = 0; (i < 8) ; i++) {
- unsigned char byte;
- status = smbus_read_byte(device, 2);
- if (status < 0) {
- print_debug("bad device: ");
- print_debug_hex8(-status);
- print_debug("\n");
- break;
- }
- print_debug_hex8(status);
- print_debug_char(' ');
- }
- device++;
- print_debug("\n");
- }
-}
diff --git a/src/mainboard/intel/jarrell/devicetree.cb b/src/mainboard/intel/jarrell/devicetree.cb
deleted file mode 100644
index 501bc7ed45..0000000000
--- a/src/mainboard/intel/jarrell/devicetree.cb
+++ /dev/null
@@ -1,80 +0,0 @@
-chip northbridge/intel/e7520
- device domain 0 on
- subsystemid 0x8086 0x1079 inherit
- device pci 00.0 on end
- device pci 00.1 on end
- device pci 01.0 on end
- device pci 02.0 on
- chip southbridge/intel/pxhd # pxhd1
- device pci 00.0 on end
- device pci 00.1 on end
- device pci 00.2 on
- chip drivers/generic/generic
- device pci 04.0 on end
- device pci 04.1 on end
- end
- end
- device pci 00.3 on end
- end
- end
- device pci 06.0 on end
- chip southbridge/intel/i82801ex # i82801er
- device pci 1d.0 on end
- device pci 1d.1 on end
- device pci 1d.2 on end
- device pci 1d.3 off end
- device pci 1d.7 on end
- device pci 1e.0 on
- chip drivers/ati/ragexl
- device pci 0c.0 on end
- end
- end
- device pci 1f.0 on
- chip superio/nsc/pc87427
- device pnp 2e.0 off end
- device pnp 2e.2 on
-# io 0x60 = 0x2f8
-# irq 0x70 = 3
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.3 on
-# io 0x60 = 0x3f8
-# irq 0x70 = 4
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.4 off end
- device pnp 2e.5 off end
- device pnp 2e.6 on
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1
- end
- device pnp 2e.7 off end
- device pnp 2e.9 off end
- device pnp 2e.a off end
- device pnp 2e.f on end
- device pnp 2e.10 off end
- device pnp 2e.14 off end
- end
- end
- device pci 1f.1 on end
- device pci 1f.2 off end
- device pci 1f.3 on end
- device pci 1f.5 off end
- device pci 1f.6 off end
- register "gpio[40]" = "ICH5R_GPIO_USE_AS_GPIO"
- register "gpio[48]" = "ICH5R_GPIO_USE_AS_GPIO | ICH5R_GPIO_SEL_OUTPUT | ICH5R_GPIO_LVL_LOW"
- register "gpio[41]" = "ICH5R_GPIO_USE_AS_GPIO | ICH5R_GPIO_SEL_INPUT"
- end
- end
- device cpu_cluster 0 on
- chip cpu/intel/socket_mPGA604 # cpu 0
- device lapic 0 on end
- end
- chip cpu/intel/socket_mPGA604 # cpu 1
- device lapic 6 on end
- end
- end
-end
diff --git a/src/mainboard/intel/jarrell/irq_tables.c b/src/mainboard/intel/jarrell/irq_tables.c
deleted file mode 100644
index fdeae8cd09..0000000000
--- a/src/mainboard/intel/jarrell/irq_tables.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/* PCI: Interrupt Routing Table found at 0x40114180 size = 320 */
-
-#include <arch/pirq_routing.h>
-
-static const struct irq_routing_table intel_irq_routing_table = {
- 0x52495024, /* u32 signature */
- 0x0100, /* u16 version */
- 32 + 16 * CONFIG_IRQ_SLOT_COUNT, /* u16 Table size 32+(16*devices) */
- 0x00, /* u8 Bus 0 */
- 0xf8, /* u8 Device 1, Function 0 */
- 0x0000, /* u16 reserve IRQ for PCI */
- 0x8086, /* u16 Vendor */
- 0x24d0, /* Device ID */
- 0x00000000, /* u32 miniport_data */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
- 0x38, /* u8 checksum - mod 256 checksum must give zero */
- { /* bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
- {0x00, 0x08, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x00, 0x00},
- {0x00, 0xf8, {{0x62, 0xdc78}, {0x61, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x00, 0x00},
- {0x00, 0xe8, {{0x60, 0xdcf8}, {0x63, 0xdcf8}, {0x62, 0xdc78}, {0x6b, 0xdcf8}}, 0x00, 0x00},
- {0x02, 0x20, {{0x62, 0xdc78}, {0x63, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x00, 0x00},
- {0x03, 0x28, {{0x62, 0xdc78}, {0x61, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x00, 0x00},
- {0x04, 0x60, {{0x61, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x00, 0x00},
- {0x02, 0x08, {{0x60, 0xdcf8}, {0x63, 0xdcf8}, {0x62, 0xdc78}, {0x61, 0xdcf8}}, 0x04, 0x00},
- {0x02, 0x10, {{0x63, 0xdcf8}, {0x62, 0xdc78}, {0x61, 0xdcf8}, {0x60, 0xdcf8}}, 0x05, 0x00},
- {0x02, 0x18, {{0x62, 0xdc78}, {0x61, 0xdcf8}, {0x60, 0xdcf8}, {0x63, 0xdcf8}}, 0x06, 0x00},
- {0x03, 0x08, {{0x60, 0xdcf8}, {0x63, 0xdcf8}, {0x61, 0xdcf8}, {0x60, 0xdcf8}}, 0x01, 0x00},
- {0x03, 0x10, {{0x60, 0xdcf8}, {0x60, 0xdcf8}, {0x63, 0xdcf8}, {0x61, 0xdcf8}}, 0x02, 0x00},
- {0x03, 0x18, {{0x60, 0xdcf8}, {0x63, 0xdcf8}, {0x62, 0xdc78}, {0x61, 0xdcf8}}, 0x03, 0x00},
- {0x00, 0x10, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdc78}, {0x63, 0xdcf8}}, 0x00, 0x00},
- {0x00, 0x18, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdc78}, {0x63, 0xdcf8}}, 0x00, 0x00},
- {0x00, 0x20, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdc78}, {0x63, 0xdcf8}}, 0x00, 0x00},
- {0x00, 0x28, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdc78}, {0x63, 0xdcf8}}, 0x00, 0x00},
- {0x00, 0x30, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdc78}, {0x63, 0xdcf8}}, 0x00, 0x00},
- {0x00, 0x38, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdc78}, {0x63, 0xdcf8}}, 0x00, 0x00}
- }
-};
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- return copy_pirq_routing_table(addr, &intel_irq_routing_table);
-}
diff --git a/src/mainboard/intel/jarrell/jarrell_fixups.c b/src/mainboard/intel/jarrell/jarrell_fixups.c
deleted file mode 100644
index 90e3ff1613..0000000000
--- a/src/mainboard/intel/jarrell/jarrell_fixups.c
+++ /dev/null
@@ -1,116 +0,0 @@
-#include <arch/io.h>
-
-static void mch_reset(void)
-{
- device_t dev;
- unsigned long value, base;
- dev = pci_locate_device_on_bus(PCI_ID(0x8086, 0x24d0), 0);
- if (dev != PCI_DEV_INVALID) {
- /* I/O space is always enables */
-
- /* Set gpio base */
- pci_write_config32(dev, 0x58, ICH5_GPIOBASE | 1);
- base = ICH5_GPIOBASE;
-
- /* Enable GPIO Bar */
- value = pci_read_config32(dev, 0x5c);
- value |= 0x10;
- pci_write_config32(dev, 0x5c, value);
-
- /* Set GPIO 19 mux to IO usage */
- value = inl(base);
- value |= (1 <<19);
- outl(value, base);
-
- /* Pull GPIO 19 low */
- value = inl(base + 0x0c);
- value &= ~(1 << 19);
- outl(value, base + 0x0c);
- }
- return;
-}
-
-static void mainboard_set_e7520_pll(unsigned bits)
-{
- uint16_t gpio_index;
- uint8_t data;
- device_t dev;
-
- /* currently only handle the Jarrell/PC87427 case */
- dev = PC87427_GPIO_DEV;
-
-
- pnp_set_logical_device(dev);
- gpio_index = pnp_read_iobase(dev, 0x60);
-
- /* select SIO GPIO port 4, pin 2 */
- pnp_write_config(dev, PC87427_GPSEL, ((pnp_read_config(dev, PC87427_GPSEL) & 0x88) | 0x42));
- /* set to push-pull, enable output */
- pnp_write_config(dev, PC87427_GPCFG1, 0x03);
-
- /* select SIO GPIO port 4, pin 4 */
- pnp_write_config(dev, PC87427_GPSEL, ((pnp_read_config(dev, PC87427_GPSEL) & 0x88) | 0x44));
- /* set to push-pull, enable output */
- pnp_write_config(dev, PC87427_GPCFG1, 0x03);
-
- /* set gpio 42,44 signal levels */
- data = inb(gpio_index + PC87427_GPDO_4);
- if ((data & 0x14) == (0xff & (((bits&2)?0:1)<<4 | ((bits&1)?0:1)<<2))) {
- print_debug("set_pllsel: correct settings detected!\n");
- return; /* settings already configured */
- } else {
- outb((data & 0xeb) | ((bits&2)?0:1)<<4 | ((bits&1)?0:1)<<2, gpio_index + PC87427_GPDO_4);
- /* reset */
- print_debug("set_pllsel: settings adjusted, now resetting...\n");
- // hard_reset(); /* should activate a PCI_RST, which should reset MCH, but it doesn't seem to work ???? */
- // mch_reset();
- full_reset();
- }
- return;
-}
-
-static void mainboard_set_e7520_leds(void)
-{
- uint8_t cnt;
- uint8_t data;
- device_t dev;
-
- /* currently only handle the Jarrell/PC87427 case */
- dev = PC87427_GPIO_DEV;
-
- pnp_set_logical_device(dev);
-
- /* enable */
- outb(0x30, 0x2e);
- outb(0x01, 0x2f);
- outb(0x2d, 0x2e);
- outb(0x01, 0x2f);
-
- /* Set auto mode for dimm leds and post */
- outb(0xf0,0x2e);
- outb(0x70,0x2f);
- outb(0xf4,0x2e);
- outb(0x30,0x2f);
- outb(0xf5,0x2e);
- outb(0x88,0x2f);
- outb(0xf6,0x2e);
- outb(0x00,0x2f);
- outb(0xf7,0x2e);
- outb(0x90,0x2f);
- outb(0xf8,0x2e);
- outb(0x00,0x2f);
-
- /* Turn the leds off */
- outb(0x00,0x88);
- outb(0x00,0x90);
-
- /* Disable the ports */
- outb(0xf5,0x2e);
- outb(0x00,0x2f);
- outb(0xf7,0x2e);
- outb(0x00,0x2f);
- outb(0xf4,0x2e);
- outb(0x00,0x2f);
-
- return;
-}
diff --git a/src/mainboard/intel/jarrell/mptable.c b/src/mainboard/intel/jarrell/mptable.c
deleted file mode 100644
index 21664ceb42..0000000000
--- a/src/mainboard/intel/jarrell/mptable.c
+++ /dev/null
@@ -1,238 +0,0 @@
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <arch/ioapic.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-
-static void *smp_write_config_table(void *v)
-{
- struct mp_config_table *mc;
- int bus_isa;
- unsigned char bus_pxhd_1;
- unsigned char bus_pxhd_2;
- unsigned char bus_pxhd_3 = 0;
- unsigned char bus_pxhd_4 = 0;
- unsigned char bus_pxhd_x = 0;
- unsigned char bus_ich5r_1;
- unsigned int bus_pxhd_id;
-
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
-
- mptable_init(mc, LOCAL_APIC_ADDR);
-
- smp_write_processors(mc);
-
- {
- device_t dev;
-
- /* ich5r */
- dev = dev_find_slot(0, PCI_DEVFN(0x1e,0));
- if (dev) {
- bus_ich5r_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- }
- else {
- printk(BIOS_DEBUG, "ERROR - could not find PCI 0:1f.0, using defaults\n");
-
- bus_ich5r_1 = 4;
- }
- /* pxhd-1 */
- dev = dev_find_slot(1, PCI_DEVFN(0x0,0));
- if (dev) {
- bus_pxhd_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-
- }
- else {
- printk(BIOS_DEBUG, "ERROR - could not find PCI 1:00.1, using defaults\n");
-
- bus_pxhd_1 = 2;
- }
- /* pxhd-2 */
- dev = dev_find_slot(1, PCI_DEVFN(0x00,2));
- if (dev) {
- bus_pxhd_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
-
- }
- else {
- printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n");
-
- bus_pxhd_2 = 3;
- }
- /* test for active riser with 2nd pxh device */
- dev = dev_find_slot(0, PCI_DEVFN(0x06,0));
- if (dev) {
- bus_pxhd_id = pci_read_config32(dev, PCI_VENDOR_ID);
- if(bus_pxhd_id == 0x35998086) {
- bus_pxhd_x = pci_read_config8(dev, PCI_SECONDARY_BUS);
- /* pxhd-3 */
- dev = dev_find_slot(bus_pxhd_x, PCI_DEVFN(0x0,0));
- if (dev) {
- bus_pxhd_id = pci_read_config32(dev, PCI_VENDOR_ID);
- if(bus_pxhd_id == 0x03298086) {
- bus_pxhd_3 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- }
- }
- /* pxhd-4 */
- dev = dev_find_slot(bus_pxhd_x, PCI_DEVFN(0x00,2));
- if (dev) {
- bus_pxhd_id = pci_read_config32(dev, PCI_VENDOR_ID);
- if(bus_pxhd_id == 0x032a8086) {
- bus_pxhd_4 = pci_read_config8(dev, PCI_SECONDARY_BUS);
- }
- }
- }
- }
- }
-
- mptable_write_buses(mc, NULL, &bus_isa);
-
- /* IOAPIC handling */
-
- smp_write_ioapic(mc, 8, 0x20, IO_APIC_ADDR);
- {
- struct resource *res;
- device_t dev;
- /* pxhd apic 3 */
- dev = dev_find_slot(1, PCI_DEVFN(0x00,1));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, 0x09, 0x20, res->base);
- }
- }
- else {
- printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI 1:00.1\n");
- }
- /* pxhd apic 4 */
- dev = dev_find_slot(1, PCI_DEVFN(0x00,3));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, 0x0a, 0x20, res->base);
- }
- }
- else {
- printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI 1:00.3\n");
- }
-
- /* pxhd apic 5 */
- if(bus_pxhd_3) { /* Active riser pxhd */
- dev = dev_find_slot(bus_pxhd_x, PCI_DEVFN(0x00,1));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, 0x0b, 0x20, res->base);
- }
- }
- else {
- printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI %d:00.1\n",bus_pxhd_x);
- }
- }
- /* pxhd apic 6 */
- if(bus_pxhd_4) { /* active riser pxhd */
- dev = dev_find_slot(bus_pxhd_x, PCI_DEVFN(0x00,3));
- if (dev) {
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- if (res) {
- smp_write_ioapic(mc, 0x0c, 0x20, res->base);
- }
- }
- else {
- printk(BIOS_DEBUG, "ERROR - could not find IOAPIC PCI %d:00.3\n",bus_pxhd_x);
- }
- }
- }
-
- mptable_add_isa_interrupts(mc, bus_isa, 0x8, 0);
-
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- bus_isa, 0x0a, 0x08, 0x10);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- bus_isa, 0x0b, 0x08, 0x11);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- bus_isa, 0x0a, 0x08, 0x10);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- bus_isa, 0x07, 0x08, 0x13);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- bus_isa, 0x0b, 0x08, 0x12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- bus_isa, 0x05, 0x08, 0x17);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- bus_isa, 0x0b, 0x08, 0x12);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- bus_isa, 0x07, 0x08, 0x13);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- bus_isa, 0x0b, 0x08, 0x11);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
- bus_isa, 0x0a, 0x08, 0x10);
-
- /* Standard local interrupt assignments */
- mptable_lintsrc(mc, bus_isa);
-
- /* FIXME verify I have the irqs handled for all of the risers */
-
- /* 2:3.0 PCI Slot 1 */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_pxhd_1, (3<<2)|0, 0x9, 0x0);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_pxhd_1, (3<<2)|1, 0x9, 0x3);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_pxhd_1, (3<<2)|2, 0x9, 0x5);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_pxhd_1, (3<<2)|3, 0x9, 0x4);
-
-
- /* 3:7.0 PCI Slot 2 */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_pxhd_2, (7<<2)|0, 0xa, 0x4);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_pxhd_2, (7<<2)|1, 0xa, 0x3);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_pxhd_2, (7<<2)|2, 0xa, 0x2);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_pxhd_2, (7<<2)|3, 0xa, 0x1);
-
- /* PCI Slot 3 (if active riser) */
- if(bus_pxhd_3) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_pxhd_3, (1<<2)|0, 0xb, 0x0);
- }
-
- /* PCI Slot 4 (if active riser) */
- if(bus_pxhd_4) {
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_pxhd_4, (1<<2)|0, 0xc, 0x0);
- }
-
- /* Onboard SCSI 0 */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_pxhd_1, (5<<2)|0, 0x9, 0x2);
-
- /* Onboard SCSI 1 */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_pxhd_1, (5<<2)|1, 0x9, 0x1);
-
- /* Onboard NIC 0 */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_pxhd_2, (4<<2)|0, 0xa, 0x6);
-
- /* Onboard NIC 1 */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_pxhd_2, (4<<2)|1, 0xa, 0x7);
-
- /* Onboard VGA */
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT,
- bus_ich5r_1, (12<<2)|0, 0x8, 0x11);
-
- /* There is no extension information... */
-
- /* Compute the checksums */
- return mptable_finalize(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr, 0);
- return (unsigned long)smp_write_config_table(v);
-}
diff --git a/src/mainboard/intel/jarrell/power_reset_check.c b/src/mainboard/intel/jarrell/power_reset_check.c
deleted file mode 100644
index 0ac526f0ee..0000000000
--- a/src/mainboard/intel/jarrell/power_reset_check.c
+++ /dev/null
@@ -1,22 +0,0 @@
-void full_reset(void)
-{
- /* Enable power on after power fail... */
- unsigned byte;
- byte = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4);
- byte &= 0xfe;
- pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, byte);
-
- outb(0x0e, 0xcf9);
-}
-
-static void power_down_reset_check(void)
-{
- uint8_t cmos;
-
- cmos=cmos_read(RTC_BOOT_BYTE)>>4 ;
- print_debug("Boot byte = ");
- print_debug_hex8(cmos);
- print_debug("\n");
-
- if((cmos>2)&&(cmos&1)) full_reset();
-}
diff --git a/src/mainboard/intel/jarrell/romstage.c b/src/mainboard/intel/jarrell/romstage.c
deleted file mode 100644
index fb4d4834f9..0000000000
--- a/src/mainboard/intel/jarrell/romstage.c
+++ /dev/null
@@ -1,110 +0,0 @@
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <cpu/x86/lapic.h>
-#include <stdlib.h>
-#include <console/console.h>
-#include "southbridge/intel/i82801ex/early_smbus.c"
-#include "northbridge/intel/e7520/raminit.h"
-#include "superio/nsc/pc87427/pc87427.h"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "watchdog.c"
-#include "southbridge/intel/i82801ex/reset.c"
-#include "power_reset_check.c"
-#include "jarrell_fixups.c"
-#include "superio/nsc/pc87427/early_init.c"
-#include "northbridge/intel/e7520/memory_initialized.c"
-#include "cpu/x86/bist.h"
-#include <spd.h>
-#include "lib/debug.c" // XXX
-
-#define SIO_GPIO_BASE 0x680
-#define SIO_XBUS_BASE 0x4880
-
-#define CONSOLE_SERIAL_DEV PNP_DEV(0x2e, PC87427_SP2)
-#define HIDDEN_SERIAL_DEV PNP_DEV(0x2e, PC87427_SP1)
-
-#define DEVPRES_CONFIG (DEVPRES_D1F0 | DEVPRES_D2F0 | DEVPRES_D6F0)
-#define DEVPRES1_CONFIG (DEVPRES1_D0F1 | DEVPRES1_D8F0)
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/intel/e7520/raminit.c"
-#include "lib/generic_sdram.c"
-#include "arch/x86/lib/stages.c"
-
-#include <cpu/intel/romstage.h>
-static void main(unsigned long bist)
-{
- static const struct mem_controller mch[] = {
- {
- .node_id = 0,
- .channel0 = { DIMM2, DIMM1, DIMM0, 0 },
- .channel1 = { DIMM6, DIMM5, DIMM4, 0 },
- }
- };
-
- if (bist == 0) {
- /* Skip this if there was a built in self test failure */
- early_mtrr_init();
- if (memory_initialized())
- skip_romstage();
- }
-
- /* Setup the console */
- pc87427_disable_dev(CONSOLE_SERIAL_DEV);
- pc87427_disable_dev(HIDDEN_SERIAL_DEV);
- pc87427_enable_dev(CONSOLE_SERIAL_DEV, CONFIG_TTYS0_BASE);
- /* Enable Serial 2 lines instead of GPIO */
- outb(0x2c, 0x2e);
- outb((inb(0x2f) & (~1<<1)), 0x2f);
- console_init();
-
- /* Halt if there was a built in self test failure */
- report_bist_failure(bist);
-
- pc87427_enable_dev(PC87427_GPIO_DEV, SIO_GPIO_BASE);
-
- pc87427_enable_dev(PC87427_XBUS_DEV, SIO_XBUS_BASE);
- xbus_cfg(PC87427_XBUS_DEV);
-
- /* MOVE ME TO A BETTER LOCATION !!! */
- /* config LPC decode for flash memory access */
- device_t dev;
- dev = pci_locate_device(PCI_ID(0x8086, 0x24d0), 0);
- if (dev == PCI_DEV_INVALID)
- die("Missing ich5?");
- pci_write_config32(dev, 0xe8, 0x00000000);
- pci_write_config8(dev, 0xf0, 0x00);
-
-#if 0
- print_pci_devices();
-#endif
- enable_smbus();
-#if 0
-// dump_spd_registers(&cpu[0]);
- int i;
- for(i = 0; i < 1; i++)
- dump_spd_registers();
-#endif
- disable_watchdogs();
- power_down_reset_check();
-// dump_ipmi_registers();
- mainboard_set_e7520_leds();
- sdram_initialize(ARRAY_SIZE(mch), mch);
- ich5_watchdog_on();
-#if 0
- dump_pci_devices();
- dump_pci_device(PCI_DEV(0, 0x00, 0));
- dump_bar14(PCI_DEV(0, 0x00, 0));
-#endif
- /* NOTE: ROMCC dies with an internal compiler error if the
- * following line is removed.
- */
- print_debug("SDRAM is up.\n");
-}
diff --git a/src/mainboard/intel/jarrell/watchdog.c b/src/mainboard/intel/jarrell/watchdog.c
deleted file mode 100644
index 7f7a039068..0000000000
--- a/src/mainboard/intel/jarrell/watchdog.c
+++ /dev/null
@@ -1,139 +0,0 @@
-#include <device/pnp_def.h>
-#include <pc80/mc146818rtc.h>
-
-#define NSC_WD_DEV PNP_DEV(0x2e, 0xa)
-#define NSC_WDBASE 0x600
-#define ICH5_WDBASE 0x400
-#define ICH5_GPIOBASE 0x500
-
-static void disable_sio_watchdog(device_t dev)
-{
- /* FIXME move me somewhere more appropriate */
- pnp_set_logical_device(dev);
- pnp_set_enable(dev, 1);
- pnp_set_iobase(dev, PNP_IDX_IO0, NSC_WDBASE);
- /* disable the sio watchdog */
- outb(0, NSC_WDBASE + 0);
- pnp_set_enable(dev, 0);
-}
-
-static void disable_ich5_watchdog(void)
-{
- /* FIXME move me somewhere more appropriate */
- device_t dev;
- unsigned long value, base;
- dev = pci_locate_device(PCI_ID(0x8086, 0x24d0), 0);
- if (dev == PCI_DEV_INVALID) {
- die("Missing ich5?");
- }
- /* Enable I/O space */
- value = pci_read_config16(dev, 0x04);
- value |= (1 << 10);
- pci_write_config16(dev, 0x04, value);
-
- /* Set and enable acpibase */
- pci_write_config32(dev, 0x40, ICH5_WDBASE | 1);
- pci_write_config8(dev, 0x44, 0x10);
- base = ICH5_WDBASE + 0x60;
-
- /* Set bit 11 in TCO1_CNT */
- value = inw(base + 0x08);
- value |= 1 << 11;
- outw(value, base + 0x08);
-
- /* Clear TCO timeout status */
- outw(0x0008, base + 0x04);
- outw(0x0002, base + 0x06);
-}
-
-static void disable_jarell_frb3(void)
-{
- device_t dev;
- unsigned long value, base;
- dev = pci_locate_device(PCI_ID(0x8086, 0x24d0), 0);
- if (dev == PCI_DEV_INVALID) {
- die("Missing ich5?");
- }
- /* Enable I/O space */
- value = pci_read_config16(dev, 0x04);
- value |= (1 << 0);
- pci_write_config16(dev, 0x04, value);
-
- /* Set gpio base */
- pci_write_config32(dev, 0x58, ICH5_GPIOBASE | 1);
- base = ICH5_GPIOBASE;
-
- /* Enable GPIO Bar */
- value = pci_read_config32(dev, 0x5c);
- value |= 0x10;
- pci_write_config32(dev, 0x5c, value);
-
- /* Configure GPIO 48 and 40 as GPIO */
- value = inl(base + 0x30);
- value |= (1 << 16) | ( 1 << 8);
- outl(value, base + 0x30);
-
- /* Configure GPIO 48 as Output */
- value = inl(base + 0x34);
- value &= ~(1 << 16);
- outl(value, base + 0x34);
-
- /* Toggle GPIO 48 high to low */
- value = inl(base + 0x38);
- value |= (1 << 16);
- outl(value, base + 0x38);
- value &= ~(1 << 16);
- outl(value, base + 0x38);
-
-}
-
-static void disable_watchdogs(void)
-{
- disable_sio_watchdog(NSC_WD_DEV);
- disable_ich5_watchdog();
- disable_jarell_frb3();
- print_debug("Watchdogs disabled\n");
-}
-
-static void ich5_watchdog_on(void)
-{
- device_t dev;
- unsigned long value, base;
- unsigned char byte;
-
- /* check cmos options */
- byte = cmos_read(RTC_BOOT_BYTE-1);
- if(!(byte & 1)) return; /* no boot watchdog */
- byte = cmos_read(RTC_BOOT_BYTE);
- if(!(byte & 2)) return; /* fallback so ignore */
-
- dev = pci_locate_device(PCI_ID(0x8086, 0x24d0), 0);
- if (dev == PCI_DEV_INVALID) {
- die("Missing ich5?");
- }
- /* Enable I/O space */
- value = pci_read_config16(dev, 0x04);
- value |= (1 << 10);
- pci_write_config16(dev, 0x04, value);
-
- /* Set and enable acpibase */
- pci_write_config32(dev, 0x40, ICH5_WDBASE | 1);
- pci_write_config8(dev, 0x44, 0x10);
- base = ICH5_WDBASE + 0x60;
-
- /* Clear TCO timeout status */
- outw(0x0008, base + 0x04);
- outw(0x0002, base + 0x06);
-
- /* set the time value 1 cnt = .6 sec */
- outw(0x0010, base + 0x01);
- /* reload the timer with the value */
- outw(0x0001, base + 0x00);
-
- /* clear bit 11 in TCO1_CNT to start watchdog */
- value = inw(base + 0x08);
- value &= ~(1 << 11);
- outw(value, base + 0x08);
-
- print_debug("Watchdog ICH5 enabled\n");
-}
diff --git a/src/mainboard/intel/xe7501devkit/Kconfig b/src/mainboard/intel/xe7501devkit/Kconfig
deleted file mode 100644
index 923d39a645..0000000000
--- a/src/mainboard/intel/xe7501devkit/Kconfig
+++ /dev/null
@@ -1,33 +0,0 @@
-if BOARD_INTEL_XE7501DEVKIT
-
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select CPU_INTEL_SOCKET_MPGA604
- select NORTHBRIDGE_INTEL_E7501
- select SOUTHBRIDGE_INTEL_I82870
- select SOUTHBRIDGE_INTEL_I82801CX
- select SUPERIO_SMSC_LPC47B272
- select ROMCC
- select HAVE_PIRQ_TABLE
- select HAVE_MP_TABLE
- select UDELAY_TSC
- select HAVE_ACPI_TABLES
- select BOARD_ROMSIZE_KB_2048
-
-config MAINBOARD_DIR
- string
- default intel/xe7501devkit
-
-config MAINBOARD_PART_NUMBER
- string
- default "XE7501devkit"
-
-config IRQ_SLOT_COUNT
- int
- default 12
-
-config MAX_CPUS
- int
- default 2
-
-endif # BOARD_INTEL_XE7501DEVKIT
diff --git a/src/mainboard/intel/xe7501devkit/acpi_tables.c b/src/mainboard/intel/xe7501devkit/acpi_tables.c
deleted file mode 100644
index fb7da1f8e7..0000000000
--- a/src/mainboard/intel/xe7501devkit/acpi_tables.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Ported to Intel XE7501DEVKIT from Agami Aruma
- * written by Stefan Reinauer <stepan@openbios.org>
- * (C) 2005 Stefan Reinauer
- * (C) 2005 Digital Design Corporation
- */
-
-#include <console/console.h>
-#include <string.h>
-#include <arch/acpi.h>
-#include <arch/ioapic.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <assert.h>
-#include "bus.h"
-#include "ioapic.h"
-
-unsigned long acpi_fill_slit(unsigned long current)
-{
- // Not implemented
- return current;
-}
-
-unsigned long acpi_fill_srat(unsigned long current)
-{
- // Not implemented
- return current;
-}
-
-unsigned long acpi_fill_madt(unsigned long current)
-{
- unsigned int irq_start = 0;
- device_t dev = 0;
- struct resource* res = NULL;
-
-
- // SJM: Hard-code CPU LAPIC entries for now
- // Use SourcePoint numbering of processors
- current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 0, 6);
- current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 1, 7);
- current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 2, 0);
- current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 3, 1);
-
-
- // Southbridge IOAPIC
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_ICH3, IO_APIC_ADDR, irq_start);
- irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
-
- // P64H2#2 Bus A IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(30, 0));
- if (!dev)
- BUG();
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_2_BUS_A, res->base, irq_start);
- irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
-
- // P64H2#2 Bus B IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(28, 0));
- if (!dev)
- BUG();
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_2_BUS_B, res->base, irq_start);
- irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
-
-
- // P64H2#1 Bus A IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(30, 0));
- if (!dev)
- BUG();
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_1_BUS_A, res->base, irq_start);
- irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
-
- // P64H2#1 Bus B IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(28, 0));
- if (!dev)
- BUG();
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, IOAPIC_P64H2_1_BUS_B, res->base, irq_start);
- irq_start += INTEL_IOAPIC_NUM_INTERRUPTS;
-
- // Map ISA IRQ 0 to IRQ 2
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 1, 0, 2, 0);
-
- // IRQ9 differs from ISA standard - ours is active high, level-triggered
- current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)current, 0, 9, 9, 0xD);
-
- return current;
-}
diff --git a/src/mainboard/intel/xe7501devkit/board_info.txt b/src/mainboard/intel/xe7501devkit/board_info.txt
deleted file mode 100644
index b351b8e696..0000000000
--- a/src/mainboard/intel/xe7501devkit/board_info.txt
+++ /dev/null
@@ -1 +0,0 @@
-Category: eval
diff --git a/src/mainboard/intel/xe7501devkit/bus.h b/src/mainboard/intel/xe7501devkit/bus.h
deleted file mode 100644
index 286120acf2..0000000000
--- a/src/mainboard/intel/xe7501devkit/bus.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef XE7501DEVKIT_BUS_H_INCLUDED
-#define XE7501DEVKIT_BUS_H_INCLUDED
-
-// These were determined by seeing how coreboot enumerates the various
-// PCI (and PCI-like) buses on the board.
-
-#define PCI_BUS_CHIPSET 0
-#define PCI_BUS_E7501_HI_B 1 // P64H2#2
-#define PCI_BUS_P64H2_2_B 2 // P64H2#2 bus B
-#define PCI_BUS_P64H2_2_A 3 // P64H2#2 bus A
-#define PCI_BUS_E7501_HI_D 4 // P64H2#1
-#define PCI_BUS_P64H2_1_B 5 // P64H2#1 bus B
-#define PCI_BUS_P64H2_1_A 6 // P64H2#1 bus A
-#define PCI_BUS_ICH3 7 // ICH3-S
-
-#endif // XE7501DEVKIT_BUS_H_INCLUDED
diff --git a/src/mainboard/intel/xe7501devkit/devicetree.cb b/src/mainboard/intel/xe7501devkit/devicetree.cb
deleted file mode 100644
index 215ed97e56..0000000000
--- a/src/mainboard/intel/xe7501devkit/devicetree.cb
+++ /dev/null
@@ -1,73 +0,0 @@
-chip northbridge/intel/e7501
- device domain 0 on
- subsystemid 0x8086 0x2480 inherit
- device pci 0.0 on end # Chipset host controller
- device pci 0.1 on end # Host RASUM controller
- device pci 2.0 on # Hub interface B
- chip southbridge/intel/i82870 # P64H2
- device pci 1c.0 on end # IOAPIC - bus B
- device pci 1d.0 on end # Hub to PCI-B bridge
- device pci 1e.0 on end # IOAPIC - bus A
- device pci 1f.0 on end # Hub to PCI-A bridge
- end
- end
- device pci 3.0 off end # Hub interface C (82808AA connector - disable for now)
- device pci 4.0 on # Hub interface D
- chip southbridge/intel/i82870 # P64H2
- device pci 1c.0 on end # IOAPIC - bus B
- device pci 1d.0 on end # Hub to PCI-B bridge
- device pci 1e.0 on end # IOAPIC - bus A
- device pci 1f.0 on end # Hub to PCI-A bridge
- end
- end
- device pci 6.0 on end # E7501 Power management registers? (undocumented)
- chip southbridge/intel/i82801cx
- device pci 1d.0 off end # USB (might not work, Southbridge code needs looking at)
- device pci 1d.1 off end # USB (not populated)
- device pci 1d.2 off end # USB (not populated)
- device pci 1e.0 on # Hub to PCI bridge
- device pci 0.0 on end
- end
- device pci 1f.0 on # LPC bridge
- chip superio/smsc/lpc47b272
- device pnp 2e.0 off # Floppy
- io 0x60 = 0x3f0
- irq 0x70 = 6
- drq 0x74 = 2
- end
- device pnp 2e.3 off # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 7
- end
- device pnp 2e.4 on # Com1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 2e.5 off # Com2
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 2e.7 on # Keyboard
- io 0x60 = 0x60
- io 0x62 = 0x64
- irq 0x70 = 1 # Keyboard interrupt
- irq 0x72 = 12 # Mouse interrupt
- end
- device pnp 2e.a off end # ACPI
- end
- end
- device pci 1f.1 on end # IDE
- device pci 1f.3 on end # SMBus
- device pci 1f.5 off end # AC97 Audio
- device pci 1f.6 off end # AC97 Modem
- end # SB
- end # PCI domain
- device cpu_cluster 0 on
- chip cpu/intel/socket_mPGA604
- device lapic 0 on end
- end
- chip cpu/intel/socket_mPGA604
- device lapic 6 on end
- end
- end
-end
diff --git a/src/mainboard/intel/xe7501devkit/dsdt.asl b/src/mainboard/intel/xe7501devkit/dsdt.asl
deleted file mode 100644
index 87dd5744e3..0000000000
--- a/src/mainboard/intel/xe7501devkit/dsdt.asl
+++ /dev/null
@@ -1,16 +0,0 @@
-/* This is a dummy dsdt. Normal ACPI requires a DSDT, but in this case, ACPI
- is just a workaround for QNX. It would be nice to eventually have a real
- dsdt here.
- Note: It will not be hooked up at runtime. It won't even get linked.
- But we still need this file. */
-
-DefinitionBlock(
- "dsdt.aml",
- "DSDT",
- 0x02, // DSDT revision: ACPI v2.0
- "COREv2", // OEM id
- "COREBOOT", // OEM table id
- 0x20090419 // OEM revision
-)
-{
-}
diff --git a/src/mainboard/intel/xe7501devkit/fadt.c b/src/mainboard/intel/xe7501devkit/fadt.c
deleted file mode 100644
index 9707b9db11..0000000000
--- a/src/mainboard/intel/xe7501devkit/fadt.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2007-2009 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <string.h>
-#include <device/pci.h>
-#include <arch/acpi.h>
-
-/* FIXME: This needs to go into a separate .h file
- * to be included by the ich7 smi handler, ich7 smi init
- * code and the mainboard fadt.
- */
-#define APM_CNT 0x0 /* ACPI mode only */
-#define CST_CONTROL 0x85
-#define PST_CONTROL 0x0
-#define ACPI_DISABLE 0xAA
-#define ACPI_ENABLE 0x55
-#define S4_BIOS 0x77
-#define GNVS_UPDATE 0xea
-
-void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
-{
- acpi_header_t *header = &(fadt->header);
- u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)), 0x40) & 0xfffe;
-
- memset((void *) fadt, 0, sizeof(acpi_fadt_t));
- memcpy(header->signature, "FACP", 4);
- header->length = sizeof(acpi_fadt_t);
- header->revision = 4;
- memcpy(header->oem_id, OEM_ID, 6);
- memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8);
- memcpy(header->asl_compiler_id, ASLC, 4);
- header->asl_compiler_revision = 1;
-
- fadt->firmware_ctrl = (unsigned long) facs;
- fadt->dsdt = (unsigned long) dsdt;
- fadt->model = 1;
- fadt->preferred_pm_profile = 0; /* PM_MOBILE; */
-
- fadt->sci_int = 0x9;
- fadt->smi_cmd = APM_CNT;
- fadt->acpi_enable = ACPI_ENABLE;
- fadt->acpi_disable = ACPI_DISABLE;
- fadt->s4bios_req = S4_BIOS;
- fadt->pstate_cnt = PST_CONTROL;
-
- fadt->pm1a_evt_blk = pmbase;
- fadt->pm1b_evt_blk = 0x0;
- fadt->pm1a_cnt_blk = pmbase + 0x4;
- fadt->pm1b_cnt_blk = 0x0;
- fadt->pm2_cnt_blk = 0x0;
- fadt->pm_tmr_blk = pmbase + 0x8;
- fadt->gpe0_blk = pmbase + 0x28;
- fadt->gpe1_blk = 0;
-
- fadt->pm1_evt_len = 4;
- fadt->pm1_cnt_len = 2;
- // XXX: pm2_cnt_len is probably wrong. find out right value (hint: it's != 0)
- fadt->pm2_cnt_len = 0;
- fadt->pm_tmr_len = 4;
- fadt->gpe0_blk_len = 8;
- fadt->gpe1_blk_len = 0;
- fadt->gpe1_base = 0;
- fadt->cst_cnt = 0; /* CST_CONTROL; */
- fadt->p_lvl2_lat = 1;
- fadt->p_lvl3_lat = 85;
- fadt->flush_size = 1024;
- fadt->flush_stride = 16;
- fadt->duty_offset = 1;
- fadt->duty_width = 0;
- fadt->day_alrm = 0xd;
- fadt->mon_alrm = 0x00;
- fadt->century = 0x00;
- fadt->iapc_boot_arch = 0x03;
-
- fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED |
- ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON |
- ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK;
-
- fadt->reset_reg.space_id = 0;
- fadt->reset_reg.bit_width = 0;
- fadt->reset_reg.bit_offset = 0;
- fadt->reset_reg.resv = 0;
- fadt->reset_reg.addrl = 0x0;
- fadt->reset_reg.addrh = 0x0;
-
- fadt->reset_value = 0;
- fadt->x_firmware_ctl_l = (unsigned long)facs;
- fadt->x_firmware_ctl_h = 0;
- fadt->x_dsdt_l = (unsigned long)dsdt;
- fadt->x_dsdt_h = 0;
-
- fadt->x_pm1a_evt_blk.space_id = 1;
- fadt->x_pm1a_evt_blk.bit_width = 32;
- fadt->x_pm1a_evt_blk.bit_offset = 0;
- fadt->x_pm1a_evt_blk.resv = 0;
- fadt->x_pm1a_evt_blk.addrl = pmbase;
- fadt->x_pm1a_evt_blk.addrh = 0x0;
-
- fadt->x_pm1b_evt_blk.space_id = 1;
- fadt->x_pm1b_evt_blk.bit_width = 0;
- fadt->x_pm1b_evt_blk.bit_offset = 0;
- fadt->x_pm1b_evt_blk.resv = 0;
- fadt->x_pm1b_evt_blk.addrl = 0x0;
- fadt->x_pm1b_evt_blk.addrh = 0x0;
-
- fadt->x_pm1a_cnt_blk.space_id = 1;
- fadt->x_pm1a_cnt_blk.bit_width = 16;
- fadt->x_pm1a_cnt_blk.bit_offset = 0;
- fadt->x_pm1a_cnt_blk.resv = 0;
- fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4;
- fadt->x_pm1a_cnt_blk.addrh = 0x0;
-
- fadt->x_pm1b_cnt_blk.space_id = 1;
- fadt->x_pm1b_cnt_blk.bit_width = 0;
- fadt->x_pm1b_cnt_blk.bit_offset = 0;
- fadt->x_pm1b_cnt_blk.resv = 0;
- fadt->x_pm1b_cnt_blk.addrl = 0x0;
- fadt->x_pm1b_cnt_blk.addrh = 0x0;
-
- fadt->x_pm2_cnt_blk.space_id = 1;
- fadt->x_pm2_cnt_blk.bit_width = 0;
- fadt->x_pm2_cnt_blk.bit_offset = 0;
- fadt->x_pm2_cnt_blk.resv = 0;
- fadt->x_pm2_cnt_blk.addrl = 0x0;
- fadt->x_pm2_cnt_blk.addrh = 0x0;
-
- fadt->x_pm_tmr_blk.space_id = 1;
- fadt->x_pm_tmr_blk.bit_width = 32;
- fadt->x_pm_tmr_blk.bit_offset = 0;
- fadt->x_pm_tmr_blk.resv = 0;
- fadt->x_pm_tmr_blk.addrl = pmbase + 0x8;
- fadt->x_pm_tmr_blk.addrh = 0x0;
-
- fadt->x_gpe0_blk.space_id = 1;
- fadt->x_gpe0_blk.bit_width = 64;
- fadt->x_gpe0_blk.bit_offset = 0;
- fadt->x_gpe0_blk.resv = 0;
- fadt->x_gpe0_blk.addrl = pmbase + 0x28;
- fadt->x_gpe0_blk.addrh = 0x0;
-
- fadt->x_gpe1_blk.space_id = 1;
- fadt->x_gpe1_blk.bit_width = 0;
- fadt->x_gpe1_blk.bit_offset = 0;
- fadt->x_gpe1_blk.resv = 0;
- fadt->x_gpe1_blk.addrl = 0x0;
- fadt->x_gpe1_blk.addrh = 0x0;
-
- header->checksum =
- acpi_checksum((void *) fadt, header->length);
-}
diff --git a/src/mainboard/intel/xe7501devkit/ioapic.h b/src/mainboard/intel/xe7501devkit/ioapic.h
deleted file mode 100644
index 9ac2aee3f8..0000000000
--- a/src/mainboard/intel/xe7501devkit/ioapic.h
+++ /dev/null
@@ -1,11 +0,0 @@
-// IOAPIC addresses determined by coreboot enumeration.
-// Someday add functions to get APIC IDs and versions from the chips themselves.
-
-#define IOAPIC_ICH3 2
-#define IOAPIC_P64H2_2_BUS_B 3 // IOAPIC 3 at 01:1c.0 MBAR = fe300000 DataAddr = fe300010
-#define IOAPIC_P64H2_2_BUS_A 4 // IOAPIC 4 at 01:1e.0 MBAR = fe301000 DataAddr = fe301010
-#define IOAPIC_P64H2_1_BUS_B 5 // IOAPIC 5 at 04:1c.0 MBAR = fe500000 DataAddr = fe500010
-#define IOAPIC_P64H2_1_BUS_A 8 // IOAPIC 8 at 04:1e.0 MBAR = fe501000 DataAddr = fe501010
-
-#define P64H2_IOAPIC_VERSION 0x20
-#define INTEL_IOAPIC_NUM_INTERRUPTS 24 // Both ICH-3 and P64-H2
diff --git a/src/mainboard/intel/xe7501devkit/irq_tables.c b/src/mainboard/intel/xe7501devkit/irq_tables.c
deleted file mode 100644
index 7af7a9f4f0..0000000000
--- a/src/mainboard/intel/xe7501devkit/irq_tables.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/* Run checkpir to verify any changes to this table...
- Documentation at : http://www.microsoft.com/whdc/archive/pciirq.mspx
-*/
-
-#include <arch/pirq_routing.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include "bus.h"
-
-#define UNUSED_INTERRUPT {0, 0}
-#define PIRQ_A 0x60
-#define PIRQ_B 0x61
-#define PIRQ_C 0x62
-#define PIRQ_D 0x63
-#define PIRQ_E 0x68
-#define PIRQ_F 0x69
-#define PIRQ_G 0x6A
-#define PIRQ_H 0x6B
-
-static const struct irq_routing_table intel_irq_routing_table = {
- PIRQ_SIGNATURE,
- PIRQ_VERSION,
- 32 + 16 * CONFIG_IRQ_SLOT_COUNT, // Size of this struct in bytes
- 0, // PCI bus number on which the interrupt router resides
- PCI_DEVFN(31, 0), // PCI device/function number of the interrupt router
- 0, // PCI-exclusive IRQ bitmap
- PCI_VENDOR_ID_INTEL, // Vendor ID of compatible PCI interrupt router
- PCI_DEVICE_ID_INTEL_82801CA_LPC, // Device ID of compatible PCI interrupt router
- 0, // Additional miniport information
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, // Reserved, must be zero
- 0xB1, // Checksum of the entire structure (causes 8-bit sum == 0)
- {
- // NOTE: For 82801, a nonzero link value is a pointer to a PIRQ[n]_ROUT register in PCI configuration space
- // This was determined from linux-2.6.11/arch/x86/pci/irq.c
- // bitmap of 0xdcf8 == routable to IRQ3-IRQ7, IRQ10-IRQ12, or IRQ14-IRQ15
- // ICH-3 doesn't allow SERIRQ or PCI message to generate IRQ0, IRQ2, IRQ8, or IRQ13
- // Not sure why IRQ9 isn't routable (inherited from Tyan S2735)
-
- // INTA# INTB# INTC# INTD#
- // bus, device # {link , bitmap}, {link , bitmap}, {link , bitmap}, {link , bitmap}, slot, rfu
-
- {PCI_BUS_CHIPSET, PCI_DEVFN(31, 0), {{PIRQ_C, 0xdcf8}, {PIRQ_B, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // IDE / SMBus
- {PCI_BUS_CHIPSET, PCI_DEVFN(29, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_D, 0xdcf8}, {PIRQ_C, 0xdcf8}, UNUSED_INTERRUPT}, 0, 0}, // USB 1.1
-
- // P64H2#2 Bus A
- {PCI_BUS_P64H2_2_A, PCI_DEVFN(1, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // SCSI
- // NOTE: Hotplug disabled on this bus
-
- // P64H2#2 Bus B
- {PCI_BUS_P64H2_2_B, PCI_DEVFN(1, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 23, 0}, // Slot 2A (J23)
- {PCI_BUS_P64H2_2_B, PCI_DEVFN(2, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 24, 0}, // Slot 2B (J24)
- {PCI_BUS_P64H2_2_B, PCI_DEVFN(3, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 25, 0}, // Slot 2C (J25)
- {PCI_BUS_P64H2_2_B, PCI_DEVFN(4, 0), {{PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 12, 0}, // Slot 2D (J12)
- // NOTE: Hotplug disabled on this bus
-
- // P64H2#1 Bus A
- {PCI_BUS_P64H2_1_A, PCI_DEVFN(1, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}}, 20, 0}, // Slot 1A (J20)
- // NOTE: Hotplug disabled on this bus
-
- // P64H2#1 Bus B
- {PCI_BUS_P64H2_1_B, PCI_DEVFN(1, 0), {{PIRQ_A, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // GB Ethernet
- {PCI_BUS_P64H2_1_B, PCI_DEVFN(2, 0), {{PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_A, 0xdcf8}}, 21, 0}, // Slot 1B (J21)
- // NOTE: Hotplug disabled on this bus
-
- // ICH-3 PCI bus
- {PCI_BUS_ICH3, PCI_DEVFN(0, 0), {{PIRQ_A, 0xdcf8}, UNUSED_INTERRUPT, UNUSED_INTERRUPT, UNUSED_INTERRUPT}, 0, 0}, // Video
- {PCI_BUS_ICH3, PCI_DEVFN(2, 0), {{PIRQ_C, 0xdcf8}, {PIRQ_D, 0xdcf8}, {PIRQ_A, 0xdcf8}, {PIRQ_B, 0xdcf8}}, 11, 0}, // Debug slot (J11)
- }
-};
-
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- return copy_pirq_routing_table(addr, &intel_irq_routing_table);
-}
diff --git a/src/mainboard/intel/xe7501devkit/mptable.c b/src/mainboard/intel/xe7501devkit/mptable.c
deleted file mode 100644
index cc7eda5ddf..0000000000
--- a/src/mainboard/intel/xe7501devkit/mptable.c
+++ /dev/null
@@ -1,142 +0,0 @@
-#include <console/console.h>
-#include <arch/smp/mpspec.h>
-#include <arch/ioapic.h>
-#include <device/pci.h>
-#include <string.h>
-#include <stdint.h>
-#include <assert.h>
-#include "bus.h"
-#include "ioapic.h"
-
-// Generate MP-table IRQ numbers for PCI devices.
-#define INT_A 0
-#define INT_B 1
-#define INT_C 2
-#define INT_D 3
-#define PCI_IRQ(dev, intLine) (((dev)<<2) | intLine)
-
-static int bus_isa;
-
-static void xe7501devkit_register_ioapics(struct mp_config_table *mc)
-{
- device_t dev;
- struct resource *res;
-
- // TODO: Gack. This is REALLY ugly.
-
- // Southbridge IOAPIC
- smp_write_ioapic(mc, IOAPIC_ICH3, 0x20, IO_APIC_ADDR); // APIC ID, Version, Address
-
- // P64H2#2 Bus A IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(30, 0));
- if (!dev)
- BUG();
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- smp_write_ioapic(mc, IOAPIC_P64H2_2_BUS_A, P64H2_IOAPIC_VERSION, res->base);
-
- // P64H2#2 Bus B IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_B, PCI_DEVFN(28, 0));
- if (!dev)
- BUG();
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- smp_write_ioapic(mc, IOAPIC_P64H2_2_BUS_B, P64H2_IOAPIC_VERSION, res->base);
-
-
- // P64H2#1 Bus A IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(30, 0));
- if (!dev)
- BUG();
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- smp_write_ioapic(mc, IOAPIC_P64H2_1_BUS_A, P64H2_IOAPIC_VERSION, res->base);
-
- // P64H2#1 Bus B IOAPIC
- dev = dev_find_slot(PCI_BUS_E7501_HI_D, PCI_DEVFN(28, 0));
- if (!dev)
- BUG();
- res = find_resource(dev, PCI_BASE_ADDRESS_0);
- smp_write_ioapic(mc, IOAPIC_P64H2_1_BUS_B, P64H2_IOAPIC_VERSION, res->base);
-}
-
-static void xe7501devkit_register_interrupts(struct mp_config_table *mc)
-{
- // Chipset PCI bus
- // Type Trigger | Polarity Bus ID IRQ APIC ID PIN#
- mptable_lintsrc(mc, PCI_BUS_CHIPSET);
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(29, INT_A), IOAPIC_ICH3, 16); // USB 1.1 Controller #1
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(31, INT_B), IOAPIC_ICH3, 17); // SMBus
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(29, INT_C), IOAPIC_ICH3, 18); // USB 1.1 Controller #3
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(31, INT_C), IOAPIC_ICH3, 18); // IDE
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_CHIPSET, PCI_IRQ(29, INT_D), IOAPIC_ICH3, 19); // USB 1.1 Controller #2
-
- // P64H2#2 Bus B
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_A), IOAPIC_P64H2_2_BUS_B, 0); // Slot 2A (J23)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_B), IOAPIC_P64H2_2_BUS_B, 1); // Slot 2A (J23)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_C), IOAPIC_P64H2_2_BUS_B, 2); // Slot 2A (J23)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(1, INT_D), IOAPIC_P64H2_2_BUS_B, 3); // Slot 2A (J23)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_A), IOAPIC_P64H2_2_BUS_B, 4); // Slot 2B (J24)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_B), IOAPIC_P64H2_2_BUS_B, 5); // Slot 2B (J24)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_C), IOAPIC_P64H2_2_BUS_B, 6); // Slot 2B (J24)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(2, INT_D), IOAPIC_P64H2_2_BUS_B, 7); // Slot 2B (J24)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_A), IOAPIC_P64H2_2_BUS_B, 8); // Slot 2C (J25)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_B), IOAPIC_P64H2_2_BUS_B, 9); // Slot 2C (J25)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_C), IOAPIC_P64H2_2_BUS_B, 10); // Slot 2C (J25)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(3, INT_D), IOAPIC_P64H2_2_BUS_B, 11); // Slot 2C (J25)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_A), IOAPIC_P64H2_2_BUS_B, 12); // Slot 2D (J12)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_B), IOAPIC_P64H2_2_BUS_B, 13); // Slot 2D (J12)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_C), IOAPIC_P64H2_2_BUS_B, 14); // Slot 2D (J12)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_B, PCI_IRQ(4, INT_D), IOAPIC_P64H2_2_BUS_B, 15); // Slot 2D (J12)
-
- // P64H2#2 Bus A
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_A, PCI_IRQ(1, INT_A), IOAPIC_P64H2_2_BUS_A, 0); // SCSI
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_2_A, PCI_IRQ(1, INT_B), IOAPIC_P64H2_2_BUS_A, 1); // SCSI
-
- // P64H2#1 Bus B
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(1, INT_A), IOAPIC_P64H2_1_BUS_B, 0); // GB Ethernet
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_A), IOAPIC_P64H2_1_BUS_B, 4); // Slot 1B (J21)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_B), IOAPIC_P64H2_1_BUS_B, 5); // Slot 1B (J21)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_C), IOAPIC_P64H2_1_BUS_B, 6); // Slot 1B (J21)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_B, PCI_IRQ(2, INT_D), IOAPIC_P64H2_1_BUS_B, 7); // Slot 1B (J21)
-
- // P64H2#1 Bus A
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_A), IOAPIC_P64H2_1_BUS_A, 0); // Slot 1A (J20)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_B), IOAPIC_P64H2_1_BUS_A, 1); // Slot 1A (J20)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_C), IOAPIC_P64H2_1_BUS_A, 2); // Slot 1A (J20)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_P64H2_1_A, PCI_IRQ(1, INT_D), IOAPIC_P64H2_1_BUS_A, 3); // Slot 1A (J20)
-
- // ICH-3
-
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(0, INT_A), IOAPIC_ICH3, 16); // Video
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_A), IOAPIC_ICH3, 18); // Debug slot (J11)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_B), IOAPIC_ICH3, 19); // Debug slot (J11)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_C), IOAPIC_ICH3, 16); // Debug slot (J11)
- smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, PCI_BUS_ICH3, PCI_IRQ(2, INT_D), IOAPIC_ICH3, 17); // Debug slot (J11)
-
- // TODO: Not sure how to handle BT_INTR# signals from the P64H2s. Do we even need to, in APIC mode?
-
- mptable_add_isa_interrupts(mc, bus_isa, IOAPIC_ICH3, 0);
-}
-
-static void *smp_write_config_table(void* v)
-{
- struct mp_config_table *mc;
-
- mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
-
- mptable_init(mc, LOCAL_APIC_ADDR);
-
- smp_write_processors(mc);
-
- mptable_write_buses(mc, NULL, &bus_isa);
- xe7501devkit_register_ioapics(mc);
- xe7501devkit_register_interrupts(mc);
-
- /* Compute the checksums */
- return mptable_finalize(mc);
-}
-
-unsigned long write_smp_table(unsigned long addr)
-{
- void *v;
- v = smp_write_floating_table(addr, 0);
- return (unsigned long)smp_write_config_table(v);
-}
diff --git a/src/mainboard/intel/xe7501devkit/romstage.c b/src/mainboard/intel/xe7501devkit/romstage.c
deleted file mode 100644
index e1a5807f28..0000000000
--- a/src/mainboard/intel/xe7501devkit/romstage.c
+++ /dev/null
@@ -1,76 +0,0 @@
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <cpu/x86/lapic.h>
-#include <arch/cpu.h>
-#include <stdlib.h>
-#include <pc80/mc146818rtc.h>
-#include <console/console.h>
-#include "southbridge/intel/i82801cx/early_smbus.c"
-#include "northbridge/intel/e7501/raminit.h"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "northbridge/intel/e7501/debug.c"
-#include "superio/smsc/lpc47b272/early_serial.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "cpu/x86/bist.h"
-#include <spd.h>
-
-#define SERIAL_DEV PNP_DEV(0x2e, LPC47B272_SP1)
-
-static void hard_reset(void)
-{
- outb(0x0e, 0x0cf9);
-}
-
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
- return smbus_read_byte(device, address);
-}
-
-#include "northbridge/intel/e7501/raminit.c"
-#include "northbridge/intel/e7501/reset_test.c"
-#include "lib/generic_sdram.c"
-
-// This function MUST appear last (ROMCC limitation)
-#include <cpu/intel/romstage.h>
-static void main(unsigned long bist)
-{
- static const struct mem_controller memctrl[] = {
- {
- .d0 = PCI_DEV(0, 0, 0),
- .d0f1 = PCI_DEV(0, 0, 1),
- .channel0 = { DIMM0, DIMM1, DIMM2, 0 },
- .channel1 = { DIMM4, DIMM5, DIMM6, 0 },
- },
- };
-
- if (bist == 0) {
- // Skip this if there was a built in self test failure
- early_mtrr_init();
- enable_lapic();
- }
-
- // Get the serial port running and print a welcome banner
- lpc47b272_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
- console_init();
-
- // Halt if there was a built in self test failure
- report_bist_failure(bist);
-
- // print_pci_devices();
-
- // If this is a warm boot, some initialization can be skipped
-
- if (!bios_reset_detected())
- {
- enable_smbus();
- // dump_spd_registers(&memctrl[0]);
- // dump_smbus_registers();
- sdram_initialize(ARRAY_SIZE(memctrl), memctrl);
- }
-
- // NOTE: ROMCC dies with an internal compiler error
- // if the following line is removed.
- print_debug("SDRAM is up.\n");
-}