summaryrefslogtreecommitdiff
path: root/src/mainboard/kontron/986lcd-m
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/kontron/986lcd-m')
-rw-r--r--src/mainboard/kontron/986lcd-m/Config.lb7
-rw-r--r--src/mainboard/kontron/986lcd-m/Kconfig2
-rw-r--r--src/mainboard/kontron/986lcd-m/Makefile.inc3
-rw-r--r--src/mainboard/kontron/986lcd-m/Options.lb2
-rw-r--r--src/mainboard/kontron/986lcd-m/acpi/superio.asl46
-rw-r--r--src/mainboard/kontron/986lcd-m/acpi_tables.c124
-rw-r--r--src/mainboard/kontron/986lcd-m/auto.c99
-rw-r--r--src/mainboard/kontron/986lcd-m/cmos.layout56
-rw-r--r--src/mainboard/kontron/986lcd-m/dsdt.asl14
-rw-r--r--src/mainboard/kontron/986lcd-m/fadt.c34
-rw-r--r--src/mainboard/kontron/986lcd-m/mainboard.c161
11 files changed, 402 insertions, 146 deletions
diff --git a/src/mainboard/kontron/986lcd-m/Config.lb b/src/mainboard/kontron/986lcd-m/Config.lb
index 0dc004055c..eab88a9589 100644
--- a/src/mainboard/kontron/986lcd-m/Config.lb
+++ b/src/mainboard/kontron/986lcd-m/Config.lb
@@ -55,7 +55,8 @@ if CONFIG_GENERATE_ACPI_TABLES
object acpi_tables.o
makerule dsdt.c
depends "$(CONFIG_MAINBOARD)/dsdt.asl"
- action "iasl -p dsdt -tc $(CONFIG_MAINBOARD)/dsdt.asl"
+ action "$(CONFIG_CROSS_COMPILE)cpp -D__ACPI__ -P $(CPPFLAGS) -I$(CONFIG_MAINBOARD) $(CONFIG_MAINBOARD)/dsdt.asl -o $(CURDIR)/dsdt.asl"
+ action "iasl -p dsdt -tc $(CURDIR)/dsdt.asl"
action "mv $(CURDIR)/dsdt.hex dsdt.c"
end
object ./dsdt.o
@@ -150,7 +151,8 @@ chip northbridge/intel/i945
device pci_domain 0 on
device pci 00.0 on end # host bridge
- device pci 01.0 off end # i945 PCIe root port
+ # autodetect 0:1.0 because it might or might not be there.
+ # device pci 01.0 off end # i945 PCIe root port
chip drivers/pci/onboard
device pci 02.0 on end # vga controller
# register "rom_address" = "0xfffc0000" # 256 KB image
@@ -174,6 +176,7 @@ chip northbridge/intel/i945
# 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
# 2 SCI (if corresponding GPIO_EN bit is also set)
register "gpi13_routing" = "1"
+ register "gpe0_en" = "0x00000400"
register "ide_legacy_combined" = "0x1"
register "ide_enable_primary" = "0x1"
diff --git a/src/mainboard/kontron/986lcd-m/Kconfig b/src/mainboard/kontron/986lcd-m/Kconfig
index 6ac6be2e2f..2af7401c55 100644
--- a/src/mainboard/kontron/986lcd-m/Kconfig
+++ b/src/mainboard/kontron/986lcd-m/Kconfig
@@ -43,7 +43,7 @@ config LB_CKS_LOC
config MAINBOARD_PART_NUMBER
string
- default "986LCD-M/mITX"
+ default "986LCD-M"
depends on BOARD_KONTRON_986LCD_M
config MMCONF_BASE_ADDRESS
diff --git a/src/mainboard/kontron/986lcd-m/Makefile.inc b/src/mainboard/kontron/986lcd-m/Makefile.inc
index 61acbe68ca..5cd84bcde7 100644
--- a/src/mainboard/kontron/986lcd-m/Makefile.inc
+++ b/src/mainboard/kontron/986lcd-m/Makefile.inc
@@ -56,7 +56,8 @@ ldscript-y += ../../../../src/arch/i386/lib/failover.lds
ifdef POST_EVALUATION
$(obj)/dsdt.c: $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl
- iasl -p dsdt -tc $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl
+ $(CPP) -D__ACPI__ -P $(CPPFLAGS) -include $(obj)/config.h -I$(src)/mainboard/$(MAINBOARDDIR) $(src)/mainboard/$(MAINBOARDDIR)/dsdt.asl -o $(obj)/dsdt.asl
+ iasl -p dsdt -tc $(obj)/dsdt.asl
mv dsdt.hex $@
$(obj)/mainboard/$(MAINBOARDDIR)/dsdt.o: $(obj)/dsdt.c
diff --git a/src/mainboard/kontron/986lcd-m/Options.lb b/src/mainboard/kontron/986lcd-m/Options.lb
index feb26a666a..811d8efdb3 100644
--- a/src/mainboard/kontron/986lcd-m/Options.lb
+++ b/src/mainboard/kontron/986lcd-m/Options.lb
@@ -312,7 +312,7 @@ default CONFIG_TTYS0_LCS=0x3
## WARNING 5 warning conditions
## NOTICE 6 normal but significant condition
## INFO 7 informational
-## CONFIG_DEBUG 8 debug-level messages
+## DEBUG 8 debug-level messages
## SPEW 9 Way too many details
## Request this level of debugging output
diff --git a/src/mainboard/kontron/986lcd-m/acpi/superio.asl b/src/mainboard/kontron/986lcd-m/acpi/superio.asl
index d2498d4e5b..bb927afb01 100644
--- a/src/mainboard/kontron/986lcd-m/acpi/superio.asl
+++ b/src/mainboard/kontron/986lcd-m/acpi/superio.asl
@@ -29,7 +29,30 @@ Device (SIO1)
{
Name(_HID, EISAID("PNP0501"))
Name(_UID, 1)
+ Name(_DDN, "COM1")
+ Method (_STA, 0)
+ {
+ // always enable for now
+ Return (0x0f)
+ }
+
+ Method (_DIS, 0) { /* NOOP */ }
+
+ Name (_PRS, ResourceTemplate() {
+ StartDependentFn(0, 1) {
+ IO(Decode16, 0x3f8, 0x3f8, 0x8, 0x8)
+ IRQNoFlags() { 4 }
+ } EndDependentFn()
+ })
+
+ Method (_CRS, 0)
+ {
+ Return(ResourceTemplate() {
+ IO(Decode16, 0x3f8, 0x3f8, 0x8, 0x8)
+ IRQNoFlags() { 4 }
+ })
+ }
// Some methods need an implementation here:
// missing: _STA, _DIS, _CRS, _PRS,
// missing: _SRS, _PS0, _PS3
@@ -39,7 +62,30 @@ Device (SIO1)
{
Name(_HID, EISAID("PNP0501"))
Name(_UID, 2)
+ Name(_DDN, "COM2")
+
+ Method (_STA, 0)
+ {
+ // always enable for now
+ Return (0x0f)
+ }
+
+ Method (_DIS, 0) { /* NOOP */ }
+
+ Name (_PRS, ResourceTemplate() {
+ StartDependentFn(0, 1) {
+ IO(Decode16, 0x2f8, 0x2f8, 0x8, 0x8)
+ IRQNoFlags() { 3 }
+ } EndDependentFn()
+ })
+ Method (_CRS, 0)
+ {
+ Return(ResourceTemplate() {
+ IO(Decode16, 0x2f8, 0x2f8, 0x8, 0x8)
+ IRQNoFlags() { 3 }
+ })
+ }
// Some methods need an implementation here:
// missing: _STA, _DIS, _CRS, _PRS,
// missing: _SRS, _PS0, _PS3
diff --git a/src/mainboard/kontron/986lcd-m/acpi_tables.c b/src/mainboard/kontron/986lcd-m/acpi_tables.c
index 27942e3499..68f3d9cbf9 100644
--- a/src/mainboard/kontron/986lcd-m/acpi_tables.c
+++ b/src/mainboard/kontron/986lcd-m/acpi_tables.c
@@ -31,100 +31,33 @@
#include <cpu/x86/msr.h>
#include "dmi.h"
-#define OLD_ACPI 0
-
extern unsigned char AmlCode[];
#if HAVE_ACPI_SLIC
unsigned long acpi_create_slic(unsigned long current);
#endif
void generate_cpu_entries(void); // from cpu/intel/speedstep
-unsigned long acpi_fill_mcfg(unsigned long current); // from northbridge/intel/i945
-
-#if OLD_ACPI
-typedef struct acpi_oemb {
- acpi_header_t header;
- u8 ss;
- u16 iost;
- u32 topm;
- u32 roms;
- u32 mg1b;
- u32 mg1l;
- u32 mg2b;
- u32 mg2l;
- u8 rsvd;
- u8 dmax;
- u32 hpta;
- u32 cpb0;
- u32 cpb1;
- u32 cpb2;
- u32 cpb3;
- u8 assb;
- u8 aotb;
- u32 aaxb;
- u8 smif;
- u8 dtse;
- u8 dts1;
- u8 dts2;
- u8 mpen;
-} __attribute__((packed)) acpi_oemb_t;
-#endif
-
-typedef struct acpi_gnvs {
- // 0x00
- u16 osys;
- u8 smif;
- u8 reserved[13];
- // 0x10
- u8 mpen;
-} __attribute__((packed)) acpi_gnvs_t;
-
-#if OLD_ACPI
-void acpi_create_oemb(acpi_oemb_t *oemb)
-{
- acpi_header_t *header = &(oemb->header);
- unsigned long tolud;
-
- memset (oemb, 0, sizeof(*oemb));
-
- /* fill out header fields */
- memcpy(header->signature, "OEMB", 4);
- memcpy(header->oem_id, OEM_ID, 6);
- memcpy(header->oem_table_id, "COREBOOT", 8);
- memcpy(header->asl_compiler_id, ASLC, 4);
-
- header->length = sizeof(acpi_oemb_t);
- header->revision = 1;
-
- oemb->ss = 0x09; // ss1 + ss 4
- oemb->iost = 0x0403; // ??
-
- tolud = pci_read_config32(dev_find_slot(0, PCI_DEVFN(2, 0)), 0x5c);
- oemb->topm = tolud;
-
- oemb->roms = 0xfff00000; // 1M hardcoded
-
- oemb->mg1b = 0x000d0000;
- oemb->mg1l = 0x00010000;
- oemb->mg2b = tolud;
- oemb->mg2l = 0-tolud;
-
- oemb->dmax = 0x87;
- oemb->hpta = 0x000e36c0;
-
- header->checksum =
- acpi_checksum((void *) oemb, sizeof(acpi_oemb_t));
-
-};
-#endif
-
-void acpi_create_gnvs(acpi_gnvs_t *gnvs)
+#include "../../../southbridge/intel/i82801gx/i82801gx_nvs.h"
+static void acpi_create_gnvs(global_nvs_t *gnvs)
{
memset((void *)gnvs, 0, sizeof(*gnvs));
- gnvs->mpen = 1;
+ gnvs->apic = 1;
+ gnvs->mpen = 1; /* Enable Multi Processing */
+
+ /* Enable both COM ports */
+ gnvs->cmap = 0x01;
+ gnvs->cmbp = 0x01;
+
+ /* IGD Displays */
+ gnvs->ndid = 3;
+ gnvs->did[0] = 0x80000100;
+ gnvs->did[1] = 0x80000240;
+ gnvs->did[2] = 0x80000410;
+ gnvs->did[3] = 0x80000410;
+ gnvs->did[4] = 0x00000005;
}
-void acpi_create_intel_hpet(acpi_hpet_t * hpet)
+static void acpi_create_intel_hpet(acpi_hpet_t * hpet)
{
#define HPET_ADDR 0xfed00000ULL
acpi_header_t *header = &(hpet->header);
@@ -212,10 +145,6 @@ unsigned long write_acpi_tables(unsigned long start)
#if HAVE_ACPI_SLIC
acpi_header_t *slic;
#endif
-#if OLD_ACPI
- acpi_oemb_t *oemb;
-#endif
- acpi_gnvs_t *gnvs;
acpi_header_t *ssdt;
acpi_header_t *dsdt;
@@ -271,15 +200,6 @@ unsigned long write_acpi_tables(unsigned long start)
ALIGN_CURRENT;
acpi_add_table(rsdp, mcfg);
-#if OLD_ACPI
- printk_debug("ACPI: * OEMB\n");
- oemb=(acpi_oemb_t *)current;
- current += sizeof(acpi_oemb_t);
- ALIGN_CURRENT;
- acpi_create_oemb(oemb);
- acpi_add_table(rsdp, oemb);
-#endif
-
printk_debug("ACPI: * FACS\n");
facs = (acpi_facs_t *) current;
current += sizeof(acpi_facs_t);
@@ -291,16 +211,6 @@ unsigned long write_acpi_tables(unsigned long start)
memcpy((void *) dsdt, (void *) AmlCode,
((acpi_header_t *) AmlCode)->length);
-#if OLD_ACPI
- for (i=0; i < dsdt->length; i++) {
- if (*(u32*)(((u32)dsdt) + i) == 0xC0DEBEEF) {
- printk_debug("ACPI: Patching up DSDT at offset 0x%04x -> 0x%08x\n", i, 0x24 + (u32)oemb);
- *(u32*)(((u32)dsdt) + i) = 0x24 + (u32)oemb;
- break;
- }
- }
-#endif
-
ALIGN_CURRENT;
/* Pack GNVS into the ACPI table area */
diff --git a/src/mainboard/kontron/986lcd-m/auto.c b/src/mainboard/kontron/986lcd-m/auto.c
index d83f0fec2a..003fdb393f 100644
--- a/src/mainboard/kontron/986lcd-m/auto.c
+++ b/src/mainboard/kontron/986lcd-m/auto.c
@@ -1,7 +1,7 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2007-2008 coresystems GmbH
+ * Copyright (C) 2007-2009 coresystems GmbH
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -57,7 +57,6 @@
#include "southbridge/intel/i82801gx/i82801gx.h"
static void setup_ich7_gpios(void)
{
- /* TODO: This is highly board specific and should be moved */
printk_debug(" GPIOS...");
/* General Registers */
outl(0x1f1ff7c0, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */
@@ -127,6 +126,12 @@ static void early_superio_config_w83627thg(void)
dev=PNP_DEV(0x2e, W83627THG_SP1);
pnp_enter_ext_func_mode(dev);
+ pnp_write_config(dev, 0x24, 0xc6); // PNPCSV
+
+ pnp_write_config(dev, 0x29, 0x43); // GPIO settings
+ pnp_write_config(dev, 0x2a, 0x40); // GPIO settings
+
+ dev=PNP_DEV(0x2e, W83627THG_SP1);
pnp_set_logical_device(dev);
pnp_set_enable(dev, 0);
pnp_set_iobase(dev, PNP_IDX_IO0, 0x3f8);
@@ -218,6 +223,8 @@ static void early_superio_config_w83627thg(void)
static void rcba_config(void)
{
+ u32 reg32;
+
/* Set up virtual channel 0 */
//RCBA32(0x0014) = 0x80000001;
//RCBA32(0x001c) = 0x03128010;
@@ -240,9 +247,52 @@ static void rcba_config(void)
/* Enable upper 128bytes of CMOS */
RCBA32(0x3400) = (1 << 2);
+ /* Now, this is a bit ugly. As per PCI specification, function 0 of a
+ * device always has to be implemented. So disabling ethernet port 1
+ * would essentially disable all three ethernet ports of the mainboard.
+ * It's possible to rename the ports to achieve compatibility to the
+ * PCI spec but this will confuse all (static!) tables containing
+ * interrupt routing information.
+ * To avoid this, we enable (unused) port 6 and swap it with port 1
+ * in the case that ethernet port 1 is disabled. Since no devices
+ * are connected to that port, we don't have to worry about interrupt
+ * routing.
+ */
+ int port_shuffle = 0;
+
/* Disable unused devices */
- RCBA32(0x3418) = FD_PCIE6|FD_PCIE5|FD_PCIE4|FD_ACMOD|FD_ACAUD|FD_PATA;
- RCBA32(0x3418) |= (1 << 0); // Required.
+ reg32 = FD_ACMOD|FD_ACAUD|FD_PATA;
+ reg32 |= FD_PCIE6|FD_PCIE5|FD_PCIE4;
+
+ if (read_option(CMOS_VSTART_ethernet1, CMOS_VLEN_ethernet1, 0) != 0) {
+ printk_debug("Disabling ethernet adapter 1.\n");
+ reg32 |= FD_PCIE1;
+ }
+ if (read_option(CMOS_VSTART_ethernet2, CMOS_VLEN_ethernet2, 0) != 0) {
+ printk_debug("Disabling ethernet adapter 2.\n");
+ reg32 |= FD_PCIE2;
+ } else {
+ if (reg32 & FD_PCIE1)
+ port_shuffle = 1;
+ }
+ if (read_option(CMOS_VSTART_ethernet3, CMOS_VLEN_ethernet3, 0) != 0) {
+ printk_debug("Disabling ethernet adapter 3.\n");
+ reg32 |= FD_PCIE3;
+ } else {
+ if (reg32 & FD_PCIE1)
+ port_shuffle = 1;
+ }
+
+ if (port_shuffle) {
+ /* Enable PCIE6 again */
+ reg32 &= ~FD_PCIE6;
+ /* Swap PCIE6 and PCIE1 */
+ RCBA32(RPFN) = 0x00043215;
+ }
+
+ reg32 |= 1;
+
+ RCBA32(0x3418) = reg32;
/* Enable PCIe Root Port Clock Gate */
// RCBA32(0x341c) = 0x00000001;
@@ -306,6 +356,16 @@ static void early_ich7_init(void)
#include "southbridge/intel/i82801gx/cmos_failover.c"
#endif
+#include <cbmem.h>
+
+// Now, this needs to be included because it relies on the symbol
+// __ROMCC_ being set during CAR stage (in order to compile the
+// BSS free versions of the functions). Either rewrite the code
+// to be always BSS free, or invent a flag that's better suited than
+// __ROMCC__ to determine whether we're in ram init stage (stage 1)
+//
+#include "lib/cbmem.c"
+
void real_main(unsigned long bist)
{
u32 reg32;
@@ -345,13 +405,14 @@ void real_main(unsigned long bist)
reg32 = inl(DEFAULT_PMBASE + 0x04);
printk_debug("PM1_CNT: %08x\n", reg32);
if (((reg32 >> 10) & 7) == 5) {
-#if HAVE_ACPI_RESUME
+#if CONFIG_HAVE_ACPI_RESUME
printk_debug("Resume from S3 detected.\n");
boot_mode = 2;
/* Clear SLP_TYPE. This will break stage2 but
* we care for that when we get there.
*/
outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04);
+
#else
printk_debug("Resume from S3 detected, but disabled.\n");
#endif
@@ -380,6 +441,7 @@ void real_main(unsigned long bist)
/* Initialize the internal PCIe links before we go into stage2 */
i945_late_initialization();
+#if !CONFIG_HAVE_ACPI_RESUME
#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8
#if defined(DEBUG_RAM_SETUP)
sdram_dump_mchbar_registers();
@@ -391,10 +453,35 @@ void real_main(unsigned long bist)
printk_debug("TOM: 0x%08x\n", tom);
ram_check(0x00000000, 0x000a0000);
- ram_check(0x00100000, tom);
+ //ram_check(0x00100000, tom);
}
#endif
+#endif
+
MCHBAR16(SSKPD) = 0xCAFE;
+
+#if CONFIG_HAVE_ACPI_RESUME
+ /* Start address of high memory tables */
+ unsigned long high_ram_base = get_top_of_ram() - HIGH_MEMORY_SIZE;
+
+ /* If there is no high memory area, we didn't boot before, so
+ * this is not a resume. In that case we just create the cbmem toc.
+ */
+ if ((boot_mode == 2) && cbmem_reinit((u64)high_ram_base)) {
+ void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME);
+
+ /* copy 1MB - 64K to high tables ram_base to prevent memory corruption
+ * through stage 2. We could keep stuff like stack and heap in high tables
+ * memory completely, but that's a wonderful clean up task for another
+ * day.
+ */
+ if (resume_backup_memory)
+ memcpy(resume_backup_memory, CONFIG_RAMBASE, HIGH_MEMORY_SAVE);
+
+ /* Magic for S3 resume */
+ pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafed00d);
+ }
+#endif
}
#include "cpu/intel/model_6ex/cache_as_ram_disable.c"
diff --git a/src/mainboard/kontron/986lcd-m/cmos.layout b/src/mainboard/kontron/986lcd-m/cmos.layout
index a53381c7a3..1a19018b5e 100644
--- a/src/mainboard/kontron/986lcd-m/cmos.layout
+++ b/src/mainboard/kontron/986lcd-m/cmos.layout
@@ -91,7 +91,21 @@ entries
# coreboot config options: bootloader
416 512 s 0 boot_devices
-#928 80 r 0 unused
+#928 40 r 0 unused
+
+# coreboot config options: mainboard specific options
+948 2 e 8 cpufan_cruise_control
+950 2 e 8 sysfan_cruise_control
+952 4 e 9 cpufan_speed
+#956 4 e 10 cpufan_temperature
+960 4 e 9 sysfan_speed
+#964 4 e 10 sysfan_temperature
+
+968 1 e 2 ethernet1
+969 1 e 2 ethernet2
+970 1 e 2 ethernet3
+
+#971 13 r 0 unused
# coreboot config options: check sums
984 16 h 0 check_sum
@@ -135,7 +149,45 @@ enumerations
7 0 Disable
7 1 Enable
7 2 Keep
-
+# Fan Cruise Control
+8 0 Disabled
+8 1 Speed
+#8 2 Thermal
+# Fan Speed (Rotations per Minute)
+9 0 5625
+9 1 5192
+9 2 4753
+9 3 4326
+9 4 3924
+9 5 3552
+9 6 3214
+9 7 2909
+9 8 2636
+9 9 2393
+9 10 2177
+9 11 1985
+9 12 1814
+9 13 1662
+9 14 1527
+9 15 1406
+#
+# Temperature (°C/°F)
+#10 0 30/86
+#10 1 33/91
+#10 2 36/96
+#10 3 39/102
+#10 4 42/107
+#10 5 45/113
+#10 6 48/118
+#10 7 51/123
+#10 8 54/129
+#10 9 57/134
+#10 10 60/140
+#10 11 63/145
+#10 12 66/150
+#10 13 69/156
+#10 14 72/161
+#10 15 75/167
# -----------------------------------------------------------------
checksums
diff --git a/src/mainboard/kontron/986lcd-m/dsdt.asl b/src/mainboard/kontron/986lcd-m/dsdt.asl
index f12e16b9a4..04a658fe90 100644
--- a/src/mainboard/kontron/986lcd-m/dsdt.asl
+++ b/src/mainboard/kontron/986lcd-m/dsdt.asl
@@ -29,24 +29,24 @@ DefinitionBlock(
)
{
// Some generic macros
- Include ("acpi/platform.asl")
+ #include "acpi/platform.asl"
// global NVS and variables
- Include ("../../../southbridge/intel/i82801gx/acpi/globalnvs.asl")
+ #include "../../../southbridge/intel/i82801gx/acpi/globalnvs.asl"
// General Purpose Events
- //include ("acpi/gpe.asl")
+ //#include "acpi/gpe.asl"
- //include ("acpi/thermal.asl")
+ //#include "acpi/thermal.asl"
Scope (\_SB) {
Device (PCI0)
{
- Include ("../../../northbridge/intel/i945/acpi/i945.asl")
- include ("../../../southbridge/intel/i82801gx/acpi/ich7.asl")
+ #include "../../../northbridge/intel/i945/acpi/i945.asl"
+ #include "../../../southbridge/intel/i82801gx/acpi/ich7.asl"
}
}
/* Chipset specific sleep states */
- include ("../../../southbridge/intel/i82801gx/acpi/sleepstates.asl")
+ #include "../../../southbridge/intel/i82801gx/acpi/sleepstates.asl"
}
diff --git a/src/mainboard/kontron/986lcd-m/fadt.c b/src/mainboard/kontron/986lcd-m/fadt.c
index e8677e1015..72d94332ef 100644
--- a/src/mainboard/kontron/986lcd-m/fadt.c
+++ b/src/mainboard/kontron/986lcd-m/fadt.c
@@ -1,7 +1,7 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2007-2008 coresystems GmbH
+ * Copyright (C) 2007-2009 coresystems GmbH
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -23,13 +23,13 @@
#include <device/pci.h>
#include <arch/acpi.h>
-/* FIXME: This needs to go into a separate .h file
+/* FIXME: This needs to go into a separate .h file
* to be included by the ich7 smi handler, ich7 smi init
* code and the mainboard fadt.
*/
#define APM_CNT 0xb2
-#define CST_CONTROL 0x00 // 0xe3 crashes the box
-#define PST_CONTROL 0x00 // 0xe2 crashes the box
+#define CST_CONTROL 0x85
+#define PST_CONTROL 0x80
#define ACPI_DISABLE 0x1e
#define ACPI_ENABLE 0xe1
#define GNVS_UPDATE 0xea
@@ -59,7 +59,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
fadt->acpi_disable = ACPI_DISABLE;
fadt->s4bios_req = 0x0;
fadt->pstate_cnt = PST_CONTROL;
-
+
fadt->pm1a_evt_blk = pmbase;
fadt->pm1b_evt_blk = 0x0;
fadt->pm1a_cnt_blk = pmbase + 0x4;
@@ -89,72 +89,72 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
fadt->century = 0x00;
fadt->iapc_boot_arch = 0x03;
- fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED |
- ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON |
+ fadt->flags = ACPI_FADT_WBINVD | ACPI_FADT_C1_SUPPORTED |
+ ACPI_FADT_C2_MP_SUPPORTED | ACPI_FADT_SLEEP_BUTTON |
ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_PLATFORM_CLOCK;
-
+
fadt->reset_reg.space_id = 0;
fadt->reset_reg.bit_width = 0;
fadt->reset_reg.bit_offset = 0;
fadt->reset_reg.resv = 0;
fadt->reset_reg.addrl = 0x0;
fadt->reset_reg.addrh = 0x0;
-
+
fadt->reset_value = 0;
fadt->x_firmware_ctl_l = (unsigned long)facs;
fadt->x_firmware_ctl_h = 0;
fadt->x_dsdt_l = (unsigned long)dsdt;
fadt->x_dsdt_h = 0;
-
+
fadt->x_pm1a_evt_blk.space_id = 1;
fadt->x_pm1a_evt_blk.bit_width = 32;
fadt->x_pm1a_evt_blk.bit_offset = 0;
fadt->x_pm1a_evt_blk.resv = 0;
fadt->x_pm1a_evt_blk.addrl = pmbase;
fadt->x_pm1a_evt_blk.addrh = 0x0;
-
+
fadt->x_pm1b_evt_blk.space_id = 1;
fadt->x_pm1b_evt_blk.bit_width = 0;
fadt->x_pm1b_evt_blk.bit_offset = 0;
fadt->x_pm1b_evt_blk.resv = 0;
fadt->x_pm1b_evt_blk.addrl = 0x0;
fadt->x_pm1b_evt_blk.addrh = 0x0;
-
+
fadt->x_pm1a_cnt_blk.space_id = 1;
fadt->x_pm1a_cnt_blk.bit_width = 16;
fadt->x_pm1a_cnt_blk.bit_offset = 0;
fadt->x_pm1a_cnt_blk.resv = 0;
fadt->x_pm1a_cnt_blk.addrl = pmbase + 0x4;
fadt->x_pm1a_cnt_blk.addrh = 0x0;
-
+
fadt->x_pm1b_cnt_blk.space_id = 1;
fadt->x_pm1b_cnt_blk.bit_width = 0;
fadt->x_pm1b_cnt_blk.bit_offset = 0;
fadt->x_pm1b_cnt_blk.resv = 0;
fadt->x_pm1b_cnt_blk.addrl = 0x0;
fadt->x_pm1b_cnt_blk.addrh = 0x0;
-
+
fadt->x_pm2_cnt_blk.space_id = 1;
fadt->x_pm2_cnt_blk.bit_width = 8;
fadt->x_pm2_cnt_blk.bit_offset = 0;
fadt->x_pm2_cnt_blk.resv = 0;
fadt->x_pm2_cnt_blk.addrl = pmbase + 0x20;
fadt->x_pm2_cnt_blk.addrh = 0x0;
-
+
fadt->x_pm_tmr_blk.space_id = 1;
fadt->x_pm_tmr_blk.bit_width = 32;
fadt->x_pm_tmr_blk.bit_offset = 0;
fadt->x_pm_tmr_blk.resv = 0;
fadt->x_pm_tmr_blk.addrl = pmbase + 0x8;
fadt->x_pm_tmr_blk.addrh = 0x0;
-
+
fadt->x_gpe0_blk.space_id = 1;
fadt->x_gpe0_blk.bit_width = 64;
fadt->x_gpe0_blk.bit_offset = 0;
fadt->x_gpe0_blk.resv = 0;
fadt->x_gpe0_blk.addrl = pmbase + 0x28;
fadt->x_gpe0_blk.addrh = 0x0;
-
+
fadt->x_gpe1_blk.space_id = 1;
fadt->x_gpe1_blk.bit_width = 0;
fadt->x_gpe1_blk.bit_offset = 0;
diff --git a/src/mainboard/kontron/986lcd-m/mainboard.c b/src/mainboard/kontron/986lcd-m/mainboard.c
index 4cc883efeb..9a2a5fdc5c 100644
--- a/src/mainboard/kontron/986lcd-m/mainboard.c
+++ b/src/mainboard/kontron/986lcd-m/mainboard.c
@@ -1,7 +1,7 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2007-2008 coresystems GmbH
+ * Copyright (C) 2007-2009 coresystems GmbH
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -19,10 +19,12 @@
* MA 02110-1301 USA
*/
-
+#include <types.h>
#include <device/device.h>
#include <console/console.h>
#include <boot/tables.h>
+#include <pc80/mc146818rtc.h>
+#include <arch/io.h>
#include "chip.h"
int add_northbridge_resources(struct lb_memory *mem);
@@ -32,7 +34,162 @@ int add_mainboard_resources(struct lb_memory *mem)
return add_northbridge_resources(mem);
}
+/* Hardware Monitor */
+
+static u16 hwm_base = 0xa00;
+
+static void hwm_write(u8 reg, u8 value)
+{
+ outb(reg, hwm_base + 0x05);
+ outb(value, hwm_base + 0x06);
+}
+
+static void hwm_bank(u8 bank)
+{
+ hwm_write(0x4e, bank);
+}
+
+#define FAN_CRUISE_CONTROL_DISABLED 0
+#define FAN_CRUISE_CONTROL_SPEED 1
+#define FAN_CRUISE_CONTROL_THERMAL 2
+
+#define FAN_SPEED_5625 0
+//#define FAN_TEMPERATURE_30DEGC 0
+
+struct fan_speed {
+ u8 fan_in;
+ u16 fan_speed;
+};
+
+// FANIN Target Speed Register
+// FANIN = 337500 / RPM
+struct fan_speed fan_speeds[] = {
+ { 0x3c, 5625 }, { 0x41, 5192 }, { 0x47, 4753 }, { 0x4e, 4326 },
+ { 0x56, 3924 }, { 0x5f, 3552 }, { 0x69, 3214 }, { 0x74, 2909 },
+ { 0x80, 2636 }, { 0x8d, 2393 }, { 0x9b, 2177 }, { 0xaa, 1985 },
+ { 0xba, 1814 }, { 0xcb, 1662 }, { 0xdd, 1527 }, { 0xf0, 1406 }
+};
+
+struct temperature {
+ u8 deg_celsius;
+ u8 deg_fahrenheit;
+};
+
+struct temperature temperatures[] = {
+ { 30, 86 }, { 33, 91 }, { 36, 96 }, { 39, 102 },
+ { 42, 107 }, { 45, 113 }, { 48, 118 }, { 51, 123 },
+ { 54, 129 }, { 57, 134 }, { 60, 140 }, { 63, 145 },
+ { 66, 150 }, { 69, 156 }, { 72, 161 }, { 75, 167 }
+};
+
+static void hwm_setup(void)
+{
+ int cpufan_control = 0, sysfan_control = 0;
+ int cpufan_speed = 0, sysfan_speed = 0;
+ int cpufan_temperature = 0, sysfan_temperature = 0;
+
+ if (get_option(&cpufan_control, "cpufan_cruise_control") < 0)
+ cpufan_control = FAN_CRUISE_CONTROL_DISABLED;
+ if (get_option(&cpufan_speed, "cpufan_speed") < 0)
+ cpufan_speed = FAN_SPEED_5625;
+ //if (get_option(&cpufan_temperature, "cpufan_temperature") < 0)
+ // cpufan_temperature = FAN_TEMPERATURE_30DEGC;
+
+ if (get_option(&sysfan_control, "sysfan_cruise_control") < 0)
+ sysfan_control = FAN_CRUISE_CONTROL_DISABLED;
+ if (get_option(&sysfan_speed, "sysfan_speed") < 0)
+ sysfan_speed = FAN_SPEED_5625;
+ //if (get_option(&sysfan_temperature, "sysfan_temperature") < 0)
+ // sysfan_temperature = FAN_TEMPERATURE_30DEGC;
+
+ // hwm_write(0x31, 0x20); // AVCC high limit
+ // hwm_write(0x34, 0x06); // VIN2 low limit
+
+ hwm_bank(0);
+ hwm_write(0x59, 0x20); // Diode Selection
+ hwm_write(0x5d, 0x0f); // All Sensors Diode, not Thermistor
+
+ hwm_bank(4);
+ hwm_write(0x54, 0xf1); // SYSTIN temperature offset
+ hwm_write(0x55, 0x19); // CPUTIN temperature offset
+ hwm_write(0x56, 0xfc); // AUXTIN temperature offset
+
+ hwm_bank(0x80); // Default
+
+ u8 fan_config = 0;
+ // 00 FANOUT is Manual Mode
+ // 01 FANOUT is Thermal Cruise Mode
+ // 10 FANOUT is Fan Speed Cruise Mode
+ switch (cpufan_control) {
+ case FAN_CRUISE_CONTROL_SPEED: fan_config |= (2 << 4); break;
+ case FAN_CRUISE_CONTROL_THERMAL: fan_config |= (1 << 4); break;
+ }
+ switch (sysfan_control) {
+ case FAN_CRUISE_CONTROL_SPEED: fan_config |= (2 << 2); break;
+ case FAN_CRUISE_CONTROL_THERMAL: fan_config |= (1 << 2); break;
+ }
+ // This register must be written first
+ hwm_write(0x04, fan_config);
+
+ switch (cpufan_control) {
+ case FAN_CRUISE_CONTROL_SPEED:
+ printk_debug("Fan Cruise Control setting CPU fan to %d RPM\n",
+ fan_speeds[cpufan_speed].fan_speed);
+ hwm_write(0x06, fan_speeds[cpufan_speed].fan_in); // CPUFANIN target speed
+ break;
+ case FAN_CRUISE_CONTROL_THERMAL:
+ printk_debug("Fan Cruise Control setting CPU fan to activation at %d deg C/%d deg F\n",
+ temperatures[cpufan_temperature].deg_celsius,
+ temperatures[cpufan_temperature].deg_fahrenheit);
+ hwm_write(0x06, temperatures[cpufan_temperature].deg_celsius); // CPUFANIN target temperature
+ break;
+ }
+
+ switch (sysfan_control) {
+ case FAN_CRUISE_CONTROL_SPEED:
+ printk_debug("Fan Cruise Control setting system fan to %d RPM\n",
+ fan_speeds[sysfan_speed].fan_speed);
+ hwm_write(0x05, fan_speeds[sysfan_speed].fan_in); // SYSFANIN target speed
+ break;
+ case FAN_CRUISE_CONTROL_THERMAL:
+ printk_debug("Fan Cruise Control setting system fan to activation at %d deg C/%d deg F\n",
+ temperatures[sysfan_temperature].deg_celsius,
+ temperatures[sysfan_temperature].deg_fahrenheit);
+ hwm_write(0x05, temperatures[sysfan_temperature].deg_celsius); // SYSFANIN target temperature
+ break;
+ }
+
+ hwm_write(0x0e, 0x02); // Fan Output Step Down Time
+ hwm_write(0x0f, 0x02); // Fan Output Step Up Time
+
+ hwm_write(0x47, 0xaf); // FAN divisor register
+ hwm_write(0x4b, 0x84); // AUXFANIN speed divisor
+
+ hwm_write(0x40, 0x01); // Init, but no SMI#
+}
+
+/* Audio Setup */
+
+extern u32 * cim_verb_data;
+extern u32 cim_verb_data_size;
+
+static void verb_setup(void)
+{
+ // Default VERB is fine on this mainboard.
+ cim_verb_data = NULL;
+ cim_verb_data_size = 0;
+}
+
+// mainboard_enable is executed as first thing after
+// enumerate_buses().
+static void mainboard_enable(device_t dev)
+{
+ verb_setup();
+ hwm_setup();
+}
+
struct chip_operations mainboard_ops = {
CHIP_NAME("Kontron 986LCD-M Mainboard")
+ .enable_dev = mainboard_enable,
};