summaryrefslogtreecommitdiff
path: root/src/mainboard/kontron/kt690/mainboard.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/kontron/kt690/mainboard.c')
-rw-r--r--src/mainboard/kontron/kt690/mainboard.c257
1 files changed, 257 insertions, 0 deletions
diff --git a/src/mainboard/kontron/kt690/mainboard.c b/src/mainboard/kontron/kt690/mainboard.c
new file mode 100644
index 0000000000..da5cd0402e
--- /dev/null
+++ b/src/mainboard/kontron/kt690/mainboard.c
@@ -0,0 +1,257 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <arch/io.h>
+#include <boot/coreboot_tables.h>
+#include <cpu/x86/msr.h>
+#include <cpu/amd/mtrr.h>
+#include <device/pci_def.h>
+#include <../southbridge/amd/sb600/sb600.h>
+#include "chip.h"
+
+#define ADT7461_ADDRESS 0x4C
+#define ARA_ADDRESS 0x0C /* Alert Response Address */
+#define SMBUS_IO_BASE 0x1000
+
+extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address);
+extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address,
+ u8 val);
+extern void lb_add_memory_range(struct lb_memory *mem, uint32_t type,
+ uint64_t start, uint64_t size);
+#define ADT7461_read_byte(address) \
+ do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address)
+#define ARA_read_byte(address) \
+ do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address)
+#define ADT7461_write_byte(address, val) \
+ do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val)
+
+uint64_t uma_memory_base, uma_memory_size;
+
+/********************************************************
+* dbm690t uses a BCM5789 as on-board NIC.
+* It has a pin named LOW_POWER to enable it into LOW POWER state.
+* In order to run NIC, we should let it out of Low power state. This pin is
+* controlled by sb600 GPM3.
+* RRG4.2.3 GPM as GPIO
+* GPM pins can be used as GPIO. The GPM I/O functions is controlled by three registers:
+* I/O C50, C51, C52, PM I/O94, 95, 96.
+* RRG4.2.3.1 GPM pins as Input
+* RRG4.2.3.2 GPM pins as Output
+********************************************************/
+static void enable_onboard_nic()
+{
+ u8 byte;
+
+ printk_info("%s.\n", __func__);
+
+ /* set index register 0C50h to 13h (miscellaneous control) */
+ outb(0x13, 0xC50); /* CMIndex */
+
+ /* set CM data register 0C51h bits [7:6] to 01b to set Input/Out control */
+ byte = inb(0xC51);
+ byte &= 0x3F;
+ byte |= 0x40;
+ outb(byte, 0xC51);
+
+ /* set GPM port 0C52h bit 3 to 0 to enable output for GPM3 */
+ byte = inb(0xC52);
+ byte &= ~0x8;
+ outb(byte, 0xC52);
+
+ /* set CM data register 0C51h bits [7:6] to 10b to set Output state control */
+ byte = inb(0xC51);
+ byte &= 0x3F;
+ byte |= 0x80; /* 7:6=10 */
+ outb(byte, 0xC51);
+
+ /* set GPM port 0C52h bit 3 to 0 to output 0 on GPM3 */
+ byte = inb(0xC52);
+ byte &= ~0x8;
+ outb(byte, 0xC52);
+}
+
+/********************************************************
+* dbm690t uses SB600 GPIO9 to detect IDE_DMA66.
+* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to
+* get the cable type, 40 pin or 80 pin?
+********************************************************/
+static void get_ide_dma66()
+{
+ u8 byte;
+ struct device *sm_dev;
+ struct device *ide_dev;
+
+ printk_info("%s.\n", __func__);
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+
+ byte = pci_read_config8(sm_dev, 0xA9);
+ byte |= (1 << 5); /* Set Gpio9 as input */
+ pci_write_config8(sm_dev, 0xA9, byte);
+
+ ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1));
+ byte = pci_read_config8(ide_dev, 0x56);
+ byte &= ~(7 << 0);
+ if ((1 << 5) & pci_read_config8(sm_dev, 0xAA))
+ byte |= 2 << 0; /* mode 2 */
+ else
+ byte |= 5 << 0; /* mode 5 */
+ pci_write_config8(ide_dev, 0x56, byte);
+}
+
+/*
+ * set thermal config
+ */
+static void set_thermal_config()
+{
+ u8 byte;
+ u16 word;
+ device_t sm_dev;
+
+ /* set ADT 7461 */
+ ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */
+ ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */
+ ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */
+ ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */
+
+ ADT7461_write_byte(0x19, 0x55); /* External THERM limit */
+ ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */
+
+ byte = ADT7461_read_byte(0x02); /* read status register to clear it */
+ ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */
+ printk_info("Init adt7461 end , status 0x02 %02x\n", byte);
+
+ /* sb600 settings for thermal config */
+ /* set SB600 GPIO 64 to GPIO with pull-up */
+ byte = pm2_ioread(0x42);
+ byte &= 0x3f;
+ pm2_iowrite(0x42, byte);
+
+ /* set GPIO 64 to input */
+ sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
+ word = pci_read_config16(sm_dev, 0x56);
+ word |= 1 << 7;
+ pci_write_config16(sm_dev, 0x56, word);
+
+ /* set GPIO 64 internal pull-up */
+ byte = pm2_ioread(0xf0);
+ byte &= 0xee;
+ pm2_iowrite(0xf0, byte);
+
+ /* set Talert to be active low */
+ byte = pm_ioread(0x67);
+ byte &= ~(1 << 5);
+ pm_iowrite(0x67, byte);
+
+ /* set Talert to generate ACPI event */
+ byte = pm_ioread(0x3c);
+ byte &= 0xf3;
+ pm_iowrite(0x3c, byte);
+
+ /* THERMTRIP pin */
+ /* byte = pm_ioread(0x68);
+ * byte |= 1 << 3;
+ * pm_iowrite(0x68, byte);
+ *
+ * byte = pm_ioread(0x55);
+ * byte |= 1 << 0;
+ * pm_iowrite(0x55, byte);
+ *
+ * byte = pm_ioread(0x67);
+ * byte &= ~( 1 << 6);
+ * pm_iowrite(0x67, byte);
+ */
+}
+
+/*************************************************
+* enable the dedicated function in dbm690t board.
+* This function called early than rs690_enable.
+*************************************************/
+void kt690_enable(device_t dev)
+{
+ struct mainboard_config *mainboard =
+ (struct mainboard_config *)dev->chip_info;
+
+ printk_info("Mainboard KT690 Enable. dev=0x%p\n", dev);
+
+#if (CONFIG_GFXUMA == 1)
+ msr_t msr, msr2;
+
+ /* TOP_MEM: the top of DRAM below 4G */
+ msr = rdmsr(TOP_MEM);
+ printk_info("%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
+ __func__, msr.lo, msr.hi);
+
+ /* TOP_MEM2: the top of DRAM above 4G */
+ msr2 = rdmsr(TOP_MEM2);
+ printk_info("%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
+ __func__, msr2.lo, msr2.hi);
+
+ switch (msr.lo) {
+ case 0x10000000: /* 256M system memory */
+ uma_memory_size = 0x2000000; /* 32M recommended UMA */
+ break;
+
+ case 0x18000000: /* 384M system memory */
+ uma_memory_size = 0x4000000; /* 64M recommended UMA */
+ break;
+
+ case 0x20000000: /* 512M system memory */
+ uma_memory_size = 0x4000000; /* 64M recommended UMA */
+ break;
+
+ default: /* 1GB and above system memory */
+ uma_memory_size = 0x8000000; /* 128M recommended UMA */
+ break;
+ }
+
+ uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */
+ printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n",
+ __func__, uma_memory_size, uma_memory_base);
+
+ /* TODO: TOP_MEM2 */
+#else
+ uma_memory_size = 0x8000000; /* 128M recommended UMA */
+ uma_memory_base = 0x38000000; /* 1GB system memory supposed */
+#endif
+
+ enable_onboard_nic();
+ get_ide_dma66();
+ set_thermal_config();
+}
+
+int add_mainboard_resources(struct lb_memory *mem)
+{
+ /* UMA is removed from system memory in the northbridge code, but
+ * in some circumstances we want the memory mentioned as reserved.
+ */
+#if (CONFIG_GFXUMA == 1)
+ printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n",
+ uma_memory_base, uma_memory_size);
+ lb_add_memory_range(mem, LB_MEM_RESERVED,
+ uma_memory_base, uma_memory_size);
+#endif
+}
+
+struct chip_operations mainboard_ops = {
+ CHIP_NAME("Kontron KT690/mITX Mainboard")
+ .enable_dev = kt690_enable,
+};