summaryrefslogtreecommitdiff
path: root/src/mainboard/lenovo/t520/devicetree.cb
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/lenovo/t520/devicetree.cb')
-rw-r--r--src/mainboard/lenovo/t520/devicetree.cb173
1 files changed, 173 insertions, 0 deletions
diff --git a/src/mainboard/lenovo/t520/devicetree.cb b/src/mainboard/lenovo/t520/devicetree.cb
new file mode 100644
index 0000000000..e28f6cc552
--- /dev/null
+++ b/src/mainboard/lenovo/t520/devicetree.cb
@@ -0,0 +1,173 @@
+chip northbridge/intel/sandybridge
+ # IGD Displays
+ register "gfx.ndid" = "3"
+ register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }"
+
+ # Enable DisplayPort Hotplug with 6ms pulse
+ register "gpu_dp_d_hotplug" = "0x06"
+
+ # Enable Panel as LVDS and configure power delays
+ register "gpu_panel_port_select" = "0" # LVDS
+ register "gpu_panel_power_cycle_delay" = "5"
+ register "gpu_panel_power_up_delay" = "300" # T1+T2: 30ms
+ register "gpu_panel_power_down_delay" = "300" # T5+T6: 30ms
+ register "gpu_panel_power_backlight_on_delay" = "2000" # T3: 200ms
+ register "gpu_panel_power_backlight_off_delay" = "2000" # T4: 200ms
+ register "gfx.use_spread_spectrum_clock" = "1"
+ register "gfx.link_frequency_270_mhz" = "1"
+ register "gpu_cpu_backlight" = "0x1155"
+ register "gpu_pch_backlight" = "0x06100610"
+
+ device cpu_cluster 0 on
+ chip cpu/intel/model_206ax
+ # Magic APIC ID to locate this chip
+ device lapic 0x0 on end
+ device lapic 0xacac off end
+
+ register "c1_acpower" = "1" # ACPI(C1) = MWAIT(C1)
+ register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3)
+ register "c3_acpower" = "5" # ACPI(C3) = MWAIT(C7)
+
+ register "c1_battery" = "1" # ACPI(C1) = MWAIT(C1)
+ register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3)
+ register "c3_battery" = "5" # ACPI(C3) = MWAIT(C7)
+ end
+ end
+
+ register "pci_mmio_size" = "2048"
+
+ device domain 0 on
+ subsystemid 0x17aa 0x21cf inherit
+
+ device pci 00.0 on end # host bridge
+ device pci 01.0 on end # NVIDIA Corporation GF119M [NVS 4200M]
+ device pci 02.0 on
+ subsystemid 0x17aa 0x21d1
+ end # vga controller
+
+ chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
+ # GPI routing
+ # 0 No effect (default)
+ # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
+ # 2 SCI (if corresponding GPIO_EN bit is also set)
+ register "alt_gp_smi_en" = "0x0000"
+ register "gpi1_routing" = "2"
+ register "gpi13_routing" = "2"
+
+ # Enable SATA ports 0 (HDD bay) & 1 (ODD bay) & 2 (mSATA) & 3 (eSATA) & 4 (dock)
+ register "sata_port_map" = "0x1f"
+ # Set max SATA speed to 6.0 Gb/s
+ register "sata_interface_speed_support" = "0x3"
+
+ register "gen1_dec" = "0x7c1601"
+ register "gen2_dec" = "0x0c15e1"
+ register "gen4_dec" = "0x0c06a1"
+
+ # Enable zero-based linear PCIe root port functions
+ register "pcie_port_coalesce" = "1"
+
+ register "c2_latency" = "101" # c2 not supported
+
+ register "pcie_hotplug_map" = "{ 0, 0, 0, 1, 0, 0, 0, 0 }"
+
+ register "spi_uvscc" = "0x2005"
+ register "spi_lvscc" = "0x2005"
+
+ device pci 16.0 on end # Management Engine Interface 1
+ device pci 16.1 off end
+ device pci 16.2 off end
+ device pci 16.3 off end
+ device pci 19.0 on # Intel Gigabit Ethernet
+ subsystemid 0x17aa 0x21ce
+ end
+ device pci 1a.0 on end # USB2 EHCI #2
+ device pci 1b.0 on end # High Definition Audio
+ device pci 1c.0 off end # PCIe Port #1
+ device pci 1c.1 on end # PCIe Port #2 Integrated Wireless LAN
+ device pci 1c.2 off end # PCIe Port #3
+ device pci 1c.3 on
+ smbios_slot_desc "7" "3" "ExpressCard Slot" "8"
+ end # PCIe Port #4 Express Card
+ device pci 1c.4 on end # PCIe Port #5 MMC/SDXC + IEEE1394
+ device pci 1c.5 off end # PCIe Port #6 Intel Ethernet PHY
+ device pci 1c.6 off end # PCIe Port #7
+ device pci 1c.7 off end # PCIe Port #8
+ device pci 1d.0 on end # USB2 EHCI #1
+
+ device pci 1f.0 on #LPC bridge
+ chip ec/lenovo/pmh7
+ device pnp ff.1 on end # dummy
+ register "backlight_enable" = "0x01"
+ register "dock_event_enable" = "0x01"
+ end
+
+ chip drivers/pc80/tpm
+ device pnp 0c31.0 on end
+ end
+
+ chip ec/lenovo/h8
+ device pnp ff.2 on # dummy
+ io 0x60 = 0x62
+ io 0x62 = 0x66
+ io 0x64 = 0x1600
+ io 0x66 = 0x1604
+ end
+
+ register "config0" = "0xa7"
+ register "config1" = "0x09"
+ register "config2" = "0xa0"
+ register "config3" = "0xc2"
+
+ register "beepmask0" = "0x00"
+ register "beepmask1" = "0x86"
+ register "has_power_management_beeps" = "0"
+ register "event2_enable" = "0xff"
+ register "event3_enable" = "0xff"
+ register "event4_enable" = "0xd0"
+ register "event5_enable" = "0xfc"
+ register "event6_enable" = "0x00"
+ register "event7_enable" = "0x01"
+ register "event8_enable" = "0x7b"
+ register "event9_enable" = "0xff"
+ register "eventa_enable" = "0x01"
+ register "eventb_enable" = "0x00"
+ register "eventc_enable" = "0xff"
+ register "eventd_enable" = "0xff"
+ register "evente_enable" = "0x0d"
+
+ register "has_bdc_detection" = "1"
+ register "bdc_gpio_num" = "54"
+ register "bdc_gpio_lvl" = "0"
+ end
+ chip drivers/lenovo/hybrid_graphics
+ device pnp ff.f on end # dummy
+
+ register "detect_gpio" = "21"
+
+ register "has_panel_hybrid_gpio" = "1"
+ register "panel_hybrid_gpio" = "52"
+ register "panel_integrated_lvl" = "1"
+
+ register "has_backlight_gpio" = "0"
+ register "has_dgpu_power_gpio" = "0"
+
+ register "has_thinker1" = "1"
+ end
+ end # LPC bridge
+ device pci 1f.2 on end # SATA Controller 1
+ device pci 1f.3 on # SMBUS controller
+ # eeprom, 8 virtual devices, same chip
+ chip drivers/i2c/at24rf08c
+ device i2c 54 on end
+ device i2c 55 on end
+ device i2c 56 on end
+ device i2c 57 on end
+ device i2c 5c on end
+ device i2c 5d on end
+ device i2c 5e on end
+ device i2c 5f on end
+ end
+ end # SMBus
+ end
+ end
+end