summaryrefslogtreecommitdiff
path: root/src/mainboard/lenovo
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/lenovo')
-rw-r--r--src/mainboard/lenovo/t400/romstage.c117
-rw-r--r--src/mainboard/lenovo/x200/romstage.c95
2 files changed, 31 insertions, 181 deletions
diff --git a/src/mainboard/lenovo/t400/romstage.c b/src/mainboard/lenovo/t400/romstage.c
index 44f560bb6a..9f8993c5be 100644
--- a/src/mainboard/lenovo/t400/romstage.c
+++ b/src/mainboard/lenovo/t400/romstage.c
@@ -16,15 +16,7 @@
// __PRE_RAM__ means: use "unsigned" for device, not a struct.
-#include <stdint.h>
-#include <string.h>
#include <arch/io.h>
-#include <arch/acpi.h>
-#include <cpu/x86/lapic.h>
-#include <cpu/x86/tsc.h>
-#include <cpu/intel/romstage.h>
-#include <cbmem.h>
-#include <romstage_handoff.h>
#include <console/console.h>
#include <southbridge/intel/i82801ix/i82801ix.h>
#include <southbridge/intel/common/gpio.h>
@@ -33,7 +25,6 @@
#include "dock.h"
#define LPC_DEV PCI_DEV(0, 0x1f, 0)
-#define MCH_DEV PCI_DEV(0, 0, 0)
static void hybrid_graphics_init(sysinfo_t *sysinfo)
{
@@ -45,7 +36,9 @@ static void hybrid_graphics_init(sysinfo_t *sysinfo)
sysinfo->enable_peg = peg;
}
-static void early_lpc_setup(void)
+static int dock_err;
+
+void mb_setup_lpc(void)
{
/* Set up SuperIO LPC forwards */
@@ -59,99 +52,35 @@ static void early_lpc_setup(void)
pci_write_config32(LPC_DEV, D31F0_GEN3_DEC, 0x1c1681);
}
-void mainboard_romstage_entry(unsigned long bist)
+void mb_setup_superio(void)
{
- sysinfo_t sysinfo;
- int s3resume = 0;
- int cbmem_initted;
- int err;
- u16 reg16;
-
- /* basic northbridge setup, including MMCONF BAR */
- gm45_early_init();
-
- if (bist == 0)
- enable_lapic();
-
- /* First, run everything needed for console output. */
- i82801ix_early_init();
- early_lpc_setup();
-
/* Minimal setup to detect dock */
- err = pc87382_early();
- if (err == 0)
+ dock_err = pc87382_early();
+ if (dock_err == 0)
dock_connect();
+}
- console_init();
- printk(BIOS_DEBUG, "running main(bist = %lu)\n", bist);
+void get_mb_spd_addrmap(u8 *spd_addrmap)
+{
+ spd_addrmap[0] = 0x50;
+ spd_addrmap[2] = 0x51;
+}
- /* Print dock info */
- if (err)
+void mb_pre_raminit_setup(sysinfo_t *sysinfo)
+{
+ /* Console is not yet initialized in mb_setup_superio, so we print
+ the dock information here */
+ if (dock_err)
printk(BIOS_ERR, "DOCK: Failed to init pc87382\n");
else
dock_info();
- reg16 = pci_read_config16(LPC_DEV, D31F0_GEN_PMCON_3);
- pci_write_config16(LPC_DEV, D31F0_GEN_PMCON_3, reg16);
- if ((MCHBAR16(SSKPD_MCHBAR) == 0xCAFE) && !(reg16 & (1 << 9))) {
- printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n");
- gm45_early_reset();
- }
-
- setup_pch_gpios(&mainboard_gpio_map);
-
- /* ASPM related setting, set early by original BIOS. */
- DMIBAR16(0x204) &= ~(3 << 10);
-
- /* Check for S3 resume. */
- const u32 pm1_cnt = inl(DEFAULT_PMBASE + 0x04);
- if (((pm1_cnt >> 10) & 7) == 5) {
- if (acpi_s3_resume_allowed()) {
- printk(BIOS_DEBUG, "Resume from S3 detected.\n");
- s3resume = 1;
- /* Clear SLP_TYPE. This will break stage2 but
- * we care for that when we get there.
- */
- outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + 0x04);
- } else {
- printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n");
- }
- }
-
- /* RAM initialization */
- enter_raminit_or_reset();
- memset(&sysinfo, 0, sizeof(sysinfo));
- sysinfo.spd_map[0] = 0x50;
- sysinfo.spd_map[2] = 0x51;
- get_gmch_info(&sysinfo);
-
- /* Configure graphic GPIOs.
- * Make sure there's a little delay between
- * setup_pch_gpios() and this call ! */
- hybrid_graphics_init(&sysinfo);
-
- raminit(&sysinfo, s3resume);
-
- const u32 deven = pci_read_config32(MCH_DEV, D0F0_DEVEN);
- /* Disable D4F0 (unknown signal controller). */
- pci_write_config32(MCH_DEV, D0F0_DEVEN, deven & ~0x4000);
-
- init_pm(&sysinfo, 0);
-
- i82801ix_dmi_setup();
- gm45_late_init(sysinfo.stepping);
- i82801ix_dmi_poll_vc1();
-
- MCHBAR16(SSKPD_MCHBAR) = 0xCAFE;
-
- init_iommu();
+ hybrid_graphics_init(sysinfo);
+}
- /* FIXME: make a proper SMBUS mux support. */
+void mb_post_raminit_setup(void)
+{
+ /* FIXME: make a proper SMBUS mux support. */
+ /* Set the SMBUS mux to the eeprom */
set_gpio(42, GPIO_LEVEL_LOW);
-
- cbmem_initted = !cbmem_recovery(s3resume);
-
- romstage_handoff_init(cbmem_initted && s3resume);
-
- printk(BIOS_SPEW, "exit main()\n");
}
diff --git a/src/mainboard/lenovo/x200/romstage.c b/src/mainboard/lenovo/x200/romstage.c
index c0113562a1..e8bbfb09fd 100644
--- a/src/mainboard/lenovo/x200/romstage.c
+++ b/src/mainboard/lenovo/x200/romstage.c
@@ -16,27 +16,15 @@
// __PRE_RAM__ means: use "unsigned" for device, not a struct.
-#include <stdint.h>
-#include <string.h>
#include <arch/io.h>
-#include <arch/acpi.h>
-#include <cpu/x86/lapic.h>
-#include <cpu/x86/tsc.h>
-#include <cpu/intel/romstage.h>
-#include <cbmem.h>
-#include <romstage_handoff.h>
-#include <console/console.h>
#include <southbridge/intel/common/gpio.h>
#include <southbridge/intel/i82801ix/i82801ix.h>
#include <northbridge/intel/gm45/gm45.h>
#define LPC_DEV PCI_DEV(0, 0x1f, 0)
-#define MCH_DEV PCI_DEV(0, 0, 0)
-static void early_lpc_setup(void)
+void mb_setup_lpc(void)
{
- /* Set up SuperIO LPC forwards */
-
/* Configure serial IRQs.*/
pci_write_config8(LPC_DEV, D31F0_SERIRQ_CNTL, 0xd0);
/* Map COMa on 0x3f8, COMb on 0x2f8. */
@@ -47,82 +35,15 @@ static void early_lpc_setup(void)
pci_write_config32(LPC_DEV, D31F0_GEN3_DEC, 0x1c1681);
}
-void mainboard_romstage_entry(unsigned long bist)
+void get_mb_spd_addrmap(u8 *spd_addrmap)
{
- sysinfo_t sysinfo;
- int s3resume = 0;
- int cbmem_initted;
- u16 reg16;
-
- /* basic northbridge setup, including MMCONF BAR */
- gm45_early_init();
-
- if (bist == 0)
- enable_lapic();
-
- /* First, run everything needed for console output. */
- i82801ix_early_init();
- early_lpc_setup();
- console_init();
- printk(BIOS_DEBUG, "running main(bist = %lu)\n", bist);
-
- reg16 = pci_read_config16(LPC_DEV, D31F0_GEN_PMCON_3);
- pci_write_config16(LPC_DEV, D31F0_GEN_PMCON_3, reg16);
- if ((MCHBAR16(SSKPD_MCHBAR) == 0xCAFE) && !(reg16 & (1 << 9))) {
- printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n");
- gm45_early_reset();
- }
-
- setup_pch_gpios(&mainboard_gpio_map);
-
- /* ASPM related setting, set early by original BIOS. */
- DMIBAR16(0x204) &= ~(3 << 10);
-
- /* Check for S3 resume. */
- const u32 pm1_cnt = inl(DEFAULT_PMBASE + 0x04);
- if (((pm1_cnt >> 10) & 7) == 5) {
- if (acpi_s3_resume_allowed()) {
- printk(BIOS_DEBUG, "Resume from S3 detected.\n");
- s3resume = 1;
- /* Clear SLP_TYPE. This will break stage2 but
- * we care for that when we get there.
- */
- outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + 0x04);
- } else {
- printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n");
- }
- }
-
- /* RAM initialization */
- enter_raminit_or_reset();
- memset(&sysinfo, 0, sizeof(sysinfo));
- sysinfo.spd_map[0] = 0x50;
- sysinfo.spd_map[2] = 0x51;
- sysinfo.enable_igd = 1;
- sysinfo.enable_peg = 0;
- get_gmch_info(&sysinfo);
- raminit(&sysinfo, s3resume);
-
- const u32 deven = pci_read_config32(MCH_DEV, D0F0_DEVEN);
- /* Disable D4F0 (unknown signal controller). */
- pci_write_config32(MCH_DEV, D0F0_DEVEN, deven & ~0x4000);
-
- init_pm(&sysinfo, 0);
-
- i82801ix_dmi_setup();
- gm45_late_init(sysinfo.stepping);
- i82801ix_dmi_poll_vc1();
-
- MCHBAR16(SSKPD_MCHBAR) = 0xCAFE;
-
- init_iommu();
+ spd_addrmap[0] = 0x50;
+ spd_addrmap[2] = 0x51;
+}
+void mb_post_raminit_setup(void)
+{
/* FIXME: make a proper SMBUS mux support. */
+ /* Set the SMBUS mux to the eeprom */
set_gpio(42, GPIO_LEVEL_LOW);
-
- cbmem_initted = !cbmem_recovery(s3resume);
-
- romstage_handoff_init(cbmem_initted && s3resume);
-
- printk(BIOS_SPEW, "exit main()\n");
}