summaryrefslogtreecommitdiff
path: root/src/mainboard/libretrend
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/libretrend')
-rw-r--r--src/mainboard/libretrend/Kconfig16
-rw-r--r--src/mainboard/libretrend/Kconfig.name2
-rw-r--r--src/mainboard/libretrend/lt1000/Kconfig55
-rw-r--r--src/mainboard/libretrend/lt1000/Kconfig.name2
-rw-r--r--src/mainboard/libretrend/lt1000/Makefile.inc7
-rw-r--r--src/mainboard/libretrend/lt1000/acpi/ec.asl0
-rw-r--r--src/mainboard/libretrend/lt1000/acpi/superio.asl0
-rw-r--r--src/mainboard/libretrend/lt1000/board_info.txt8
-rw-r--r--src/mainboard/libretrend/lt1000/bootblock.c35
-rw-r--r--src/mainboard/libretrend/lt1000/data.vbtbin0 -> 4608 bytes
-rw-r--r--src/mainboard/libretrend/lt1000/devicetree.cb298
-rw-r--r--src/mainboard/libretrend/lt1000/dsdt.asl25
-rw-r--r--src/mainboard/libretrend/lt1000/gma-mainboard.ads17
-rw-r--r--src/mainboard/libretrend/lt1000/gpio.h189
-rw-r--r--src/mainboard/libretrend/lt1000/ramstage.c15
-rw-r--r--src/mainboard/libretrend/lt1000/romstage.c63
16 files changed, 732 insertions, 0 deletions
diff --git a/src/mainboard/libretrend/Kconfig b/src/mainboard/libretrend/Kconfig
new file mode 100644
index 0000000000..7e1eacdd71
--- /dev/null
+++ b/src/mainboard/libretrend/Kconfig
@@ -0,0 +1,16 @@
+if VENDOR_LIBRETREND
+
+choice
+ prompt "Mainboard model"
+
+source "src/mainboard/libretrend/*/Kconfig.name"
+
+endchoice
+
+source "src/mainboard/libretrend/*/Kconfig"
+
+config MAINBOARD_VENDOR
+ string "Mainboard Vendor"
+ default "Libretrend"
+
+endif # VENDOR_LIBRETREND
diff --git a/src/mainboard/libretrend/Kconfig.name b/src/mainboard/libretrend/Kconfig.name
new file mode 100644
index 0000000000..cd272b0a31
--- /dev/null
+++ b/src/mainboard/libretrend/Kconfig.name
@@ -0,0 +1,2 @@
+config VENDOR_LIBRETREND
+ bool "Libretrend"
diff --git a/src/mainboard/libretrend/lt1000/Kconfig b/src/mainboard/libretrend/lt1000/Kconfig
new file mode 100644
index 0000000000..b4a4e49ef7
--- /dev/null
+++ b/src/mainboard/libretrend/lt1000/Kconfig
@@ -0,0 +1,55 @@
+if BOARD_LIBRETREND_LT1000
+
+config BOARD_SPECIFIC_OPTIONS
+ def_bool y
+ select BOARD_ROMSIZE_KB_8192
+ select HAVE_ACPI_RESUME
+ select HAVE_ACPI_TABLES
+ select INTEL_GMA_HAVE_VBT
+ select MAINBOARD_HAS_LIBGFXINIT
+ select MAINBOARD_HAS_LPC_TPM
+ select SOC_INTEL_SKYLAKE
+ select SPD_READ_BY_WORD
+ select SUPERIO_ITE_IT8786E
+
+config IRQ_SLOT_COUNT
+ int
+ default 18
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "LT1000"
+
+config MAINBOARD_DIR
+ string
+ default "libretrend/lt1000"
+
+config MAX_CPUS
+ int
+ default 4
+
+config VGA_BIOS_ID
+ string
+ default "8086,1916"
+
+config DIMM_MAX
+ int
+ default 2
+
+config DIMM_SPD_SIZE
+ int
+ default 512
+
+config CBFS_SIZE
+ hex
+ default 0x600000
+
+config ADD_FSP_BINARIES
+ bool
+ default y
+
+config FSP_USE_REPO
+ bool
+ default y
+
+endif
diff --git a/src/mainboard/libretrend/lt1000/Kconfig.name b/src/mainboard/libretrend/lt1000/Kconfig.name
new file mode 100644
index 0000000000..26e5255f05
--- /dev/null
+++ b/src/mainboard/libretrend/lt1000/Kconfig.name
@@ -0,0 +1,2 @@
+config BOARD_LIBRETREND_LT1000
+ bool "LT1000"
diff --git a/src/mainboard/libretrend/lt1000/Makefile.inc b/src/mainboard/libretrend/lt1000/Makefile.inc
new file mode 100644
index 0000000000..cab4a5e194
--- /dev/null
+++ b/src/mainboard/libretrend/lt1000/Makefile.inc
@@ -0,0 +1,7 @@
+## SPDX-License-Identifier: GPL-2.0-or-later
+## This file is part of the coreboot project.
+
+bootblock-y += bootblock.c
+
+ramstage-y += ramstage.c
+ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads
diff --git a/src/mainboard/libretrend/lt1000/acpi/ec.asl b/src/mainboard/libretrend/lt1000/acpi/ec.asl
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/src/mainboard/libretrend/lt1000/acpi/ec.asl
diff --git a/src/mainboard/libretrend/lt1000/acpi/superio.asl b/src/mainboard/libretrend/lt1000/acpi/superio.asl
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/src/mainboard/libretrend/lt1000/acpi/superio.asl
diff --git a/src/mainboard/libretrend/lt1000/board_info.txt b/src/mainboard/libretrend/lt1000/board_info.txt
new file mode 100644
index 0000000000..2d7c8933e3
--- /dev/null
+++ b/src/mainboard/libretrend/lt1000/board_info.txt
@@ -0,0 +1,8 @@
+Vendor name: Libretrend
+Board name: LT1000
+Category: desktop
+ROM package: SOIC8
+ROM protocol: SPI
+ROM socketed: n
+Flashrom support: y
+Release year: 2018
diff --git a/src/mainboard/libretrend/lt1000/bootblock.c b/src/mainboard/libretrend/lt1000/bootblock.c
new file mode 100644
index 0000000000..bc85deca9b
--- /dev/null
+++ b/src/mainboard/libretrend/lt1000/bootblock.c
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* This file is part of the coreboot project. */
+
+#include <bootblock_common.h>
+#include <superio/ite/common/ite.h>
+#include <superio/ite/it8786e/it8786e.h>
+
+#define GPIO_DEV PNP_DEV(0x2e, IT8786E_GPIO)
+#define SERIAL1_DEV PNP_DEV(0x2e, IT8786E_SP1)
+#define SERIAL3_DEV PNP_DEV(0x2e, IT8786E_SP3)
+#define SERIAL4_DEV PNP_DEV(0x2e, IT8786E_SP4)
+#define SERIAL5_DEV PNP_DEV(0x2e, IT8786E_SP5)
+#define SERIAL6_DEV PNP_DEV(0x2e, IT8786E_SP6)
+
+void bootblock_mainboard_early_init(void)
+{
+ ite_conf_clkin(GPIO_DEV, ITE_UART_CLK_PREDIVIDE_24);
+ ite_enable_3vsbsw(GPIO_DEV);
+ ite_kill_watchdog(GPIO_DEV);
+ ite_enable_serial(SERIAL1_DEV, CONFIG_TTYS0_BASE);
+
+ /*
+ * FIXME:
+ * IT8786E has 6 COM ports, COM1/3/5 have default IO base 0x3f8 and
+ * COM2/4/6 have 0x2f8. When enabling devices before setting resources
+ * from devicetree, the output on debugging COM1 becomes very slow due
+ * to the same IO bases for multiple COM ports. For now set different
+ * hardcoded IO bases for COM3/4/5/6 ports, they will be set later to
+ * desired values from devicetree. They can be also turned off.
+ */
+ ite_enable_serial(SERIAL3_DEV, 0x3e8);
+ ite_enable_serial(SERIAL4_DEV, 0x2e8);
+ ite_enable_serial(SERIAL5_DEV, 0x2f0);
+ ite_enable_serial(SERIAL6_DEV, 0x2e0);
+}
diff --git a/src/mainboard/libretrend/lt1000/data.vbt b/src/mainboard/libretrend/lt1000/data.vbt
new file mode 100644
index 0000000000..cb4a2f4a6c
--- /dev/null
+++ b/src/mainboard/libretrend/lt1000/data.vbt
Binary files differ
diff --git a/src/mainboard/libretrend/lt1000/devicetree.cb b/src/mainboard/libretrend/lt1000/devicetree.cb
new file mode 100644
index 0000000000..f54b877f18
--- /dev/null
+++ b/src/mainboard/libretrend/lt1000/devicetree.cb
@@ -0,0 +1,298 @@
+chip soc/intel/skylake
+
+ # Enable deep Sx states
+ register "deep_s3_enable_ac" = "0"
+ register "deep_s3_enable_dc" = "0"
+ register "deep_s5_enable_ac" = "1"
+ register "deep_s5_enable_dc" = "1"
+ register "deep_sx_config" = "DSX_EN_WAKE_PIN"
+
+ register "eist_enable" = "1"
+
+ register "serirq_mode" = "SERIRQ_CONTINUOUS"
+
+ # Set the Thermal Control Circuit (TCC) activation value to 95C
+ # even though FSP integration guide says to set it to 100C for SKL-U
+ # (offset at 0), because when the TCC activates at 100C, the CPU
+ # will have already shut itself down from overheating protection.
+ register "tcc_offset" = "5" # TCC of 95C
+
+ # GPE configuration
+ # Note that GPE events called out in ASL code rely on this
+ # route. i.e. If this route changes then the affected GPE
+ # offset bits also need to be changed.
+ register "gpe0_dw0" = "GPP_C"
+ register "gpe0_dw1" = "GPP_D"
+ register "gpe0_dw2" = "GPP_E"
+
+ register "gen1_dec" = "0x007c0a01" # EC 0xa00-0xa7f
+ register "gen2_dec" = "0x000c03e1" # COM3 port 0x3e0 - 0x3ef
+ register "gen3_dec" = "0x00fc02e1" # COM2/4/5/6 ports 0x2e0 - 0x2ff
+ register "gen4_dec" = "0x000c0081" # 0x80 - 0x8f
+
+ # Enable "Intel Speed Shift Technology"
+ register "speed_shift_enable" = "1"
+
+ # Disable DPTF
+ register "dptf_enable" = "0"
+
+ # FSP Configuration
+ register "ProbelessTrace" = "0"
+ register "EnableLan" = "0"
+ register "EnableSata" = "1"
+ register "SataSalpSupport" = "0"
+ register "SataMode" = "0"
+ register "SataPortsEnable[0]" = "1"
+ register "SataPortsEnable[1]" = "1"
+ register "SataPortsEnable[2]" = "1"
+ register "SataPortsDevSlp[0]" = "0"
+ register "SataPortsDevSlp[1]" = "0"
+ register "SataPortsDevSlp[2]" = "0"
+ register "SataSpeedLimit" = "2"
+ register "EnableAzalia" = "1"
+ register "DspEnable" = "1"
+ register "IoBufferOwnership" = "0"
+ register "EnableTraceHub" = "0"
+ register "SsicPortEnable" = "0"
+ register "SmbusEnable" = "1"
+ register "Cio2Enable" = "0"
+ register "ScsEmmcEnabled" = "0"
+ register "ScsEmmcHs400Enabled" = "0"
+ register "ScsSdCardEnabled" = "0"
+ register "SkipExtGfxScan" = "1"
+ register "Device4Enable" = "1"
+ register "HeciEnabled" = "1"
+ register "SaGv" = "SaGv_Enabled"
+ register "PmConfigSlpS3MinAssert" = "2" # 50ms
+ register "PmConfigSlpS4MinAssert" = "1" # 1s
+ register "PmConfigSlpSusMinAssert" = "3" # 500ms
+ register "PmConfigSlpAMinAssert" = "3" # 2s
+ register "PmTimerDisabled" = "1"
+
+ register "pirqa_routing" = "PCH_IRQ11"
+ register "pirqb_routing" = "PCH_IRQ10"
+ register "pirqc_routing" = "PCH_IRQ11"
+ register "pirqd_routing" = "PCH_IRQ11"
+ register "pirqe_routing" = "PCH_IRQ11"
+ register "pirqf_routing" = "PCH_IRQ11"
+ register "pirqg_routing" = "PCH_IRQ11"
+ register "pirqh_routing" = "PCH_IRQ11"
+
+ # VR Settings Configuration for 4 Domains
+ #+----------------+-------+-------+-------------+-------+
+ #| Domain/Setting | SA | IA | GT-Unsliced | GT |
+ #+----------------+-------+-------+-------------+-------+
+ #| Psi1Threshold | 20A | 20A | 20A | 20A |
+ #| Psi2Threshold | 4A | 5A | 5A | 5A |
+ #| Psi3Threshold | 1A | 1A | 1A | 1A |
+ #| Psi3Enable | 1 | 1 | 1 | 1 |
+ #| Psi4Enable | 1 | 1 | 1 | 1 |
+ #| ImonSlope | 0 | 0 | 0 | 0 |
+ #| ImonOffset | 0 | 0 | 0 | 0 |
+ #| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V |
+ #+----------------+-------+-------+-------------+-------+
+ register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
+ .vr_config_enable = 1,
+ .psi1threshold = VR_CFG_AMP(20),
+ .psi2threshold = VR_CFG_AMP(4),
+ .psi3threshold = VR_CFG_AMP(1),
+ .psi3enable = 1,
+ .psi4enable = 1,
+ .imon_slope = 0x0,
+ .imon_offset = 0x0,
+ .voltage_limit = 1520,
+ }"
+
+ register "domain_vr_config[VR_IA_CORE]" = "{
+ .vr_config_enable = 1,
+ .psi1threshold = VR_CFG_AMP(20),
+ .psi2threshold = VR_CFG_AMP(5),
+ .psi3threshold = VR_CFG_AMP(1),
+ .psi3enable = 1,
+ .psi4enable = 1,
+ .imon_slope = 0x0,
+ .imon_offset = 0x0,
+ .voltage_limit = 1520,
+ }"
+
+ register "domain_vr_config[VR_GT_UNSLICED]" = "{
+ .vr_config_enable = 1,
+ .psi1threshold = VR_CFG_AMP(20),
+ .psi2threshold = VR_CFG_AMP(5),
+ .psi3threshold = VR_CFG_AMP(1),
+ .psi3enable = 1,
+ .psi4enable = 1,
+ .imon_slope = 0x0,
+ .imon_offset = 0x0,
+ .voltage_limit = 1520,
+ }"
+
+ register "domain_vr_config[VR_GT_SLICED]" = "{
+ .vr_config_enable = 1,
+ .psi1threshold = VR_CFG_AMP(20),
+ .psi2threshold = VR_CFG_AMP(5),
+ .psi3threshold = VR_CFG_AMP(1),
+ .psi3enable = 1,
+ .psi4enable = 1,
+ .imon_slope = 0x0,
+ .imon_offset = 0x0,
+ .voltage_limit = 1520,
+ }"
+
+ register "PcieRpEnable[2]" = "1"
+ register "PcieRpEnable[3]" = "1"
+ register "PcieRpEnable[4]" = "1"
+ register "PcieRpEnable[8]" = "1"
+ register "PcieRpEnable[9]" = "1"
+ register "PcieRpEnable[10]" = "1"
+ register "PcieRpEnable[11]" = "1"
+
+ register "PcieRpClkSrcNumber[0]" = "0"
+ register "PcieRpClkSrcNumber[3]" = "1"
+ register "PcieRpClkSrcNumber[4]" = "2"
+ register "PcieRpClkSrcNumber[8]" = "3"
+ register "PcieRpClkSrcNumber[9]" = "3"
+ register "PcieRpClkSrcNumber[10]" = "3"
+ register "PcieRpClkSrcNumber[11]" = "3"
+
+
+ register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port (right)
+ register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port (right)
+ register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # WiFi
+ register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # F_USB3 header
+ register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # F_USB3 header
+ register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port (left)
+ register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Type-A Port (left)
+ register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # GL850G for F_USB1 and F_USB2 headers
+
+ register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port (right)
+ register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port (right)
+ register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # F_USB3 header
+ register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # F_USB3 header
+
+ # PL2 override 25W
+ register "tdp_pl2_override" = "25"
+
+ # Send an extra VR mailbox command for the PS4 exit issue
+ register "SendVrMbxCmd" = "2"
+
+ # Lock Down
+ register "common_soc_config" = "{
+ .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
+ }"
+
+ device cpu_cluster 0 on
+ device lapic 0 on end
+ end
+ device domain 0 on
+ device pci 00.0 on end # Host Bridge
+ device pci 02.0 on end # Integrated Graphics Device
+ device pci 14.0 on end # USB xHCI
+ device pci 14.1 on end # USB xDCI (OTG)
+ device pci 14.2 on end # Thermal Subsystem
+ device pci 16.0 on end # Management Engine Interface 1
+ device pci 16.1 off end # Management Engine Interface 2
+ device pci 16.2 off end # Management Engine IDE-R
+ device pci 16.3 off end # Management Engine KT Redirection
+ device pci 16.4 off end # Management Engine Interface 3
+ device pci 17.0 on end # SATA
+ device pci 1c.0 off end # PCI Express Port 1
+ device pci 1c.1 off end # PCI Express Port 2
+ device pci 1c.2 on end # PCI Express Port 3
+ device pci 1c.3 off end # PCI Express Port 4
+ device pci 1c.4 on # PCI Express Port 5
+ smbios_slot_desc "SlotTypePciExpressMini52pinWithoutBSKO"
+ "SlotLengthOther" "MPCIE_WIFI1" "SlotDataBusWidth1X"
+ end
+ device pci 1c.5 on end # PCI Express Port 6
+ device pci 1c.6 off end # PCI Express Port 7
+ device pci 1c.7 off end # PCI Express Port 8
+ device pci 1d.0 on # PCI Express Port 9
+ smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther"
+ "SSD_M.2 2242/2280" "SlotDataBusWidth4X"
+ end
+ device pci 1d.1 on end # PCI Express Port 10
+ device pci 1d.2 on end # PCI Express Port 11
+ device pci 1d.3 on end # PCI Express Port 12
+ device pci 1f.0 on
+ chip drivers/pc80/tpm
+ device pnp 0c31.0 on end
+ end
+ chip superio/ite/it8786e
+ register "TMPIN1.mode" = "THERMAL_PECI"
+ register "TMPIN1.offset" = "100"
+ register "TMPIN1.min" = "128"
+ register "TMPIN2.mode" = "THERMAL_RESISTOR"
+ register "TMPIN2.min" = "128"
+ register "TMPIN3.mode" = "THERMAL_MODE_DISABLED"
+ register "ec.vin_mask" = "VIN_ALL"
+ # FAN1 is CPU fan (on board)
+ register "FAN1.mode" = "FAN_SMART_AUTOMATIC"
+ register "FAN1.smart.tmpin" = " 1"
+ register "FAN1.smart.tmp_off" = "35"
+ register "FAN1.smart.tmp_start" = "60"
+ register "FAN1.smart.tmp_full" = "85"
+ register "FAN1.smart.tmp_delta" = " 2"
+ register "FAN1.smart.pwm_start" = "20"
+ register "FAN1.smart.slope" = "24"
+ # FAN2 is system fan (4 pin connector populated)
+ #register "FAN2.mode" = "FAN_MODE_OFF"
+ # FAN3 PWM is used for LVDS backlight control
+ #register "FAN3.mode" = "FAN_MODE_OFF"
+
+ device pnp 2e.1 on # COM 1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.2 on # COM 2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.3 on # Printer Port
+ io 0x60 = 0x378
+ io 0x62 = 0x778
+ irq 0x70 = 5
+ drq 0x74 = 3
+ end
+ device pnp 2e.4 on # Environment Controller
+ io 0x60 = 0xa40
+ io 0x62 = 0xa30
+ irq 0x70 = 9
+ end
+ device pnp 2e.5 on # Keyboard
+ io 0x60 = 0x60
+ io 0x62 = 0x64
+ irq 0x70 = 1
+ end
+ device pnp 2e.6 on # Mouse
+ irq 0x70 = 12
+ end
+ device pnp 2e.7 off # GPIO
+ end
+ device pnp 2e.8 on # COM 3
+ io 0x60 = 0x3e8
+ irq 0x70 = 3
+ end
+ device pnp 2e.9 on # COM 4
+ io 0x60 = 0x2e8
+ irq 0x70 = 4
+ end
+ device pnp 2e.a off end # CIR
+ device pnp 2e.b on # COM 5
+ io 0x60 = 0x2f0
+ irq 0x70 = 3
+ end
+ device pnp 2e.c on # COM 6
+ io 0x60 = 0x2e0
+ irq 0x70 = 4
+ end
+ end
+ end # LPC Interface
+ device pci 1f.1 on end # P2SB
+ device pci 1f.2 on end # Power Management Controller
+ device pci 1f.3 on end # Intel HDA
+ device pci 1f.4 on end # SMBus
+ device pci 1f.5 on end # PCH SPI
+ device pci 1f.6 off end # GbE
+ end
+end
diff --git a/src/mainboard/libretrend/lt1000/dsdt.asl b/src/mainboard/libretrend/lt1000/dsdt.asl
new file mode 100644
index 0000000000..624806ca04
--- /dev/null
+++ b/src/mainboard/libretrend/lt1000/dsdt.asl
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* This file is part of the coreboot project. */
+
+#include <arch/acpi.h>
+DefinitionBlock(
+ "dsdt.aml",
+ "DSDT",
+ 0x02, /* DSDT revision: ACPI v2.0 and up */
+ OEM_ID,
+ ACPI_TABLE_CREATOR,
+ 0x20110725 /* OEM revision */
+)
+{
+ #include <soc/intel/skylake/acpi/platform.asl>
+ #include <soc/intel/skylake/acpi/globalnvs.asl>
+ #include <cpu/intel/common/acpi/cpu.asl>
+
+ Device (\_SB.PCI0)
+ {
+ #include <soc/intel/skylake/acpi/systemagent.asl>
+ #include <soc/intel/skylake/acpi/pch.asl>
+ }
+
+ #include <southbridge/intel/common/acpi/sleepstates.asl>
+}
diff --git a/src/mainboard/libretrend/lt1000/gma-mainboard.ads b/src/mainboard/libretrend/lt1000/gma-mainboard.ads
new file mode 100644
index 0000000000..210ea288b8
--- /dev/null
+++ b/src/mainboard/libretrend/lt1000/gma-mainboard.ads
@@ -0,0 +1,17 @@
+-- SPDX-License-Identifier: GPL-2.0-or-later
+-- This file is part of the coreboot project.
+
+with HW.GFX.GMA;
+with HW.GFX.GMA.Display_Probing;
+
+use HW.GFX.GMA;
+use HW.GFX.GMA.Display_Probing;
+
+private package GMA.Mainboard is
+
+ ports : constant Port_List :=
+ (DP1,
+ HDMI2,
+ others => Disabled);
+
+end GMA.Mainboard;
diff --git a/src/mainboard/libretrend/lt1000/gpio.h b/src/mainboard/libretrend/lt1000/gpio.h
new file mode 100644
index 0000000000..d937ae5945
--- /dev/null
+++ b/src/mainboard/libretrend/lt1000/gpio.h
@@ -0,0 +1,189 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* This file is part of the coreboot project. */
+
+#ifndef LT1000_GPIO_H
+#define LT1000_GPIO_H
+
+#include <soc/gpe.h>
+#include <soc/gpio.h>
+
+#ifndef __ACPI__
+
+/* Pad configuration in ramstage. */
+static const struct pad_config gpio_table[] = {
+/* RCIN# */ PAD_CFG_NF(GPP_A0, NONE, DEEP, NF1),
+/* LAD0 */ PAD_CFG_NF(GPP_A1, NONE, DEEP, NF1),
+/* LAD1 */ PAD_CFG_NF(GPP_A2, NONE, DEEP, NF1),
+/* LAD2 */ PAD_CFG_NF(GPP_A3, NONE, DEEP, NF1),
+/* LAD3 */ PAD_CFG_NF(GPP_A4, NONE, DEEP, NF1),
+/* LFRAME# */ PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1),
+/* SERIRQ */ PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1),
+/* PIRQA# */ PAD_CFG_NC(GPP_A7),
+/* CLKRUN# */ PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1),
+/* CLKOUT_LPC0 */ PAD_CFG_NF(GPP_A9, NONE, DEEP, NF1),
+/* CLKOUT_LPC1 */ PAD_CFG_NF(GPP_A10, NONE, DEEP, NF1),
+/* PME# */ PAD_CFG_NC(GPP_A11),
+/* BM_BUSY# */ PAD_CFG_NC(GPP_A12),
+/* SUSWARN# */ PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1),
+/* SUS_STAT# */ PAD_CFG_NF(GPP_A14, NONE, DEEP, NF1),
+/* SUSACK# */ PAD_CFG_NF(GPP_A15, DN_20K, DEEP, NF1),
+/* SD_1P8_SEL */ PAD_CFG_NC(GPP_A16),
+/* SD_PWR_EN# */ PAD_CFG_NF(GPP_A17, NONE, DEEP, NF1),
+/* ISH_GP0 */ PAD_CFG_GPI(GPP_A18, NONE, DEEP),
+/* ISH_GP1 */ PAD_CFG_GPI(GPP_A19, NONE, DEEP),
+/* ISH_GP2 */ PAD_CFG_GPI(GPP_A20, NONE, DEEP),
+/* ISH_GP3 */ PAD_CFG_NC(GPP_A21),
+/* ISH_GP4 */ PAD_CFG_NC(GPP_A22),
+/* ISH_GP5 */ PAD_CFG_NC(GPP_A23),
+
+/* CORE_VID0 */ PAD_CFG_NC(GPP_B0),
+/* CORE_VID1 */ PAD_CFG_NC(GPP_B1),
+/* VRALERT# */ PAD_CFG_NC(GPP_B2),
+/* CPU_GP2 */ PAD_CFG_NC(GPP_B3),
+/* CPU_GP3 */ PAD_CFG_NC(GPP_B4),
+/* SRCCLKREQ0# */ PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1),
+/* SRCCLKREQ1# */ PAD_CFG_NF(GPP_B6, NONE, DEEP, NF1),
+/* SRCCLKREQ2# */ PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1),
+/* SRCCLKREQ3# */ PAD_CFG_NF(GPP_B8, NONE, DEEP, NF1),
+/* SRCCLKREQ4# */ PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1),
+/* SRCCLKREQ5# */ PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1),
+/* EXT_PWR_GATE# */ PAD_CFG_NC(GPP_B11),
+/* SLP_S0# */ PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1),
+/* PLTRST# */ PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1),
+/* SPKR */ PAD_CFG_NF(GPP_B14, NONE, DEEP, NF1),
+/* GSPI0_CS# */ PAD_CFG_NC(GPP_B15),
+/* GSPI0_CLK */ PAD_CFG_NC(GPP_B16),
+/* GSPI0_MISO */ PAD_CFG_NC(GPP_B17),
+/* GSPI0_MOSI */ PAD_CFG_GPI_SCI(GPP_B18, UP_20K, PLTRST, LEVEL, INVERT),
+/* GSPI1_CS# */ PAD_CFG_NC(GPP_B19),
+/* GSPI1_CLK */ PAD_CFG_NC(GPP_B20),
+/* GSPI1_MISO */ PAD_CFG_NC(GPP_B21),
+/* GSPI1_MOSI */ PAD_CFG_NF(GPP_B22, DN_20K, DEEP, NF1),
+/* SM1ALERT# */ PAD_CFG_TERM_GPO(GPP_B23, 1, DN_20K, DEEP),
+
+/* SMBCLK */ PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1),
+/* SMBDATA */ PAD_CFG_NF(GPP_C1, DN_20K, DEEP, NF1),
+/* SMBALERT# */ PAD_CFG_TERM_GPO(GPP_C2, 1, DN_20K, DEEP),
+/* SML0CLK */ PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1),
+/* SML0DATA */ PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1),
+/* SML0ALERT# */ PAD_CFG_GPI_APIC_INVERT(GPP_C5, DN_20K, DEEP),
+/* SML1CLK */ PAD_CFG_NC(GPP_C6), /* RESERVED */
+/* SML1DATA */ PAD_CFG_NC(GPP_C7), /* RESERVED */
+/* UART0_RXD */ PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1),
+/* UART0_TXD */ PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1),
+/* UART0_RTS# */ PAD_CFG_NF(GPP_C10, NONE, DEEP, NF1),
+/* UART0_CTS# */ PAD_CFG_NF(GPP_C11, NONE, DEEP, NF1),
+/* UART1_RXD */ PAD_CFG_NC(GPP_C12),
+/* UART1_TXD */ PAD_CFG_NC(GPP_C13),
+/* UART1_RTS# */ PAD_CFG_NC(GPP_C14),
+/* UART1_CTS# */ PAD_CFG_NC(GPP_C15),
+/* I2C0_SDA */ PAD_CFG_GPI(GPP_C16, NONE, DEEP),
+/* I2C0_SCL */ PAD_CFG_GPI(GPP_C17, NONE, DEEP),
+/* I2C1_SDA */ PAD_CFG_GPI(GPP_C18, NONE, DEEP),
+/* I2C1_SCL */ PAD_CFG_NC(GPP_C19),
+/* UART2_RXD */ PAD_CFG_NC(GPP_C20),
+/* UART2_TXD */ PAD_CFG_NC(GPP_C21),
+/* UART2_RTS# */ PAD_CFG_NC(GPP_C22),
+/* UART2_CTS# */ PAD_CFG_NC(GPP_C23),
+
+/* SPI1_CS# */ PAD_CFG_NC(GPP_D0),
+/* SPI1_CLK */ PAD_CFG_NC(GPP_D1),
+/* SPI1_MISO */ PAD_CFG_NC(GPP_D2),
+/* SPI1_MOSI */ PAD_CFG_NC(GPP_D3),
+/* FASHTRIG */ PAD_CFG_NC(GPP_D4),
+/* ISH_I2C0_SDA */ PAD_CFG_NC(GPP_D5),
+/* ISH_I2C0_SCL */ PAD_CFG_NC(GPP_D6),
+/* ISH_I2C1_SDA */ PAD_CFG_NC(GPP_D7),
+/* ISH_I2C1_SCL */ PAD_CFG_NC(GPP_D8),
+/* ISH_SPI_CS# */ PAD_CFG_TERM_GPO(GPP_D9, 0, NONE, DEEP),
+/* ISH_SPI_CLK */ PAD_CFG_GPI(GPP_D10, NONE, DEEP),
+/* ISH_SPI_MISO */ PAD_CFG_TERM_GPO(GPP_D11, 1, NONE, DEEP),
+/* ISH_SPI_MOSI */ PAD_CFG_NC(GPP_D12),
+/* ISH_UART0_RXD */ PAD_CFG_NC(GPP_D13),
+/* ISH_UART0_TXD */ PAD_CFG_NC(GPP_D14),
+/* ISH_UART0_RTS# */ PAD_CFG_NC(GPP_D15),
+/* ISH_UART0_CTS# */ PAD_CFG_NC(GPP_D16),
+/* DMIC_CLK1 */ PAD_CFG_NF(GPP_D17, NONE, DEEP, NF1),
+/* DMIC_DATA1 */ PAD_CFG_NF(GPP_D18, NONE, DEEP, NF1),
+/* DMIC_CLK0 */ PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1),
+/* DMIC_DATA0 */ PAD_CFG_NF(GPP_D20, NONE, DEEP, NF1),
+/* SPI1_IO2 */ PAD_CFG_NC(GPP_D21),
+/* SPI1_IO3 */ PAD_CFG_NC(GPP_D22),
+/* I2S_MCLK */ PAD_CFG_NC(GPP_D23),
+
+/* SATAXPCI0 */ PAD_CFG_NF(GPP_E0, UP_20K, DEEP, NF1),
+/* SATAXPCIE1 */ PAD_CFG_NF(GPP_E1, UP_20K, DEEP, NF1),
+/* SATAXPCIE2 */ PAD_CFG_NF(GPP_E2, UP_20K, DEEP, NF1),
+/* CPU_GP0 */ PAD_CFG_NC(GPP_E3),
+/* SATA_DEVSLP0 */ PAD_CFG_NC(GPP_E4),
+/* SATA_DEVSLP1 */ PAD_CFG_NC(GPP_E5),
+/* SATA_DEVSLP2 */ PAD_CFG_NC(GPP_E6),
+/* CPU_GP1 */ PAD_CFG_NC(GPP_E7),
+/* SATALED# */ PAD_CFG_NF(GPP_E8, NONE, DEEP, NF1),
+/* USB2_OCO# */ PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1),
+/* USB2_OC1# */ PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1),
+/* USB2_OC2# */ PAD_CFG_NF(GPP_E11, NONE, DEEP, NF1),
+/* USB2_OC3# */ PAD_CFG_NC(GPP_E12),
+/* DDPB_HPD0 */ PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1),
+/* DDPC_HPD1 */ PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1),
+/* DDPD_HPD2 */ PAD_CFG_NC(GPP_E15),
+/* DDPE_HPD3 */ PAD_CFG_GPI_ACPI_SCI(GPP_E16, NONE, PLTRST, NONE),
+/* EDP_HPD */ PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1),
+/* DDPB_CTRLCLK */ PAD_CFG_NF(GPP_E18, NONE, DEEP, NF1),
+/* DDPB_CTRLDATA */ PAD_CFG_NF(GPP_E19, DN_20K, DEEP, NF1),
+/* DDPC_CTRLCLK */ PAD_CFG_NF(GPP_E20, NONE, DEEP, NF1),
+/* DDPC_CTRLDATA */ PAD_CFG_NF(GPP_E21, DN_20K, DEEP, NF1),
+/* DDPD_CTRLCLK */ PAD_CFG_GPI_APIC(GPP_E22, NONE, DEEP),
+/* DDPD_CTRLDATA */ PAD_CFG_TERM_GPO(GPP_E23, 1, DN_20K, DEEP),
+
+/* I2S2_SCLK */ PAD_CFG_NC(GPP_F0),
+/* I2S2_SFRM */ PAD_CFG_NC(GPP_F1),
+/* I2S2_TXD */ PAD_CFG_NC(GPP_F2),
+/* I2S2_RXD */ PAD_CFG_NC(GPP_F3),
+/* I2C2_SDA */ PAD_CFG_NC(GPP_F4),
+/* I2C2_SCL */ PAD_CFG_NC(GPP_F5),
+/* I2C3_SDA */ PAD_CFG_NC(GPP_F6),
+/* I2C3_SCL */ PAD_CFG_NC(GPP_F7),
+/* I2C4_SDA */ PAD_CFG_NF_1V8(GPP_F8, NONE, DEEP, NF1),
+/* I2C4_SCL */ PAD_CFG_NF_1V8(GPP_F9, NONE, DEEP, NF1),
+/* I2C5_SDA */ PAD_CFG_NC(GPP_F10),
+/* I2C5_SCL */ PAD_CFG_NC(GPP_F11),
+/* EMMC_CMD */ PAD_CFG_NC(GPP_F12),
+/* EMMC_DATA0 */ PAD_CFG_NC(GPP_F13),
+/* EMMC_DATA1 */ PAD_CFG_NC(GPP_F14),
+/* EMMC_DATA2 */ PAD_CFG_NC(GPP_F15),
+/* EMMC_DATA3 */ PAD_CFG_NC(GPP_F16),
+/* EMMC_DATA4 */ PAD_CFG_NC(GPP_F17),
+/* EMMC_DATA5 */ PAD_CFG_NC(GPP_F18),
+/* EMMC_DATA6 */ PAD_CFG_NC(GPP_F19),
+/* EMMC_DATA7 */ PAD_CFG_NC(GPP_F20),
+/* EMMC_RCLK */ PAD_CFG_NC(GPP_F21),
+/* EMMC_CLK */ PAD_CFG_NC(GPP_F22),
+/* RSVD */ PAD_CFG_NC(GPP_F23),
+
+/* SD_CMD */ PAD_CFG_NF(GPP_G0, NONE, DEEP, NF1),
+/* SD_DATA0 */ PAD_CFG_NF(GPP_G1, NONE, DEEP, NF1),
+/* SD_DATA1 */ PAD_CFG_NF(GPP_G2, NONE, DEEP, NF1),
+/* SD_DATA2 */ PAD_CFG_NF(GPP_G3, NONE, DEEP, NF1),
+/* SD_DATA3 */ PAD_CFG_NF(GPP_G4, NONE, DEEP, NF1),
+/* SD_CD# */ PAD_CFG_NF(GPP_G5, NONE, DEEP, NF1),
+/* SD_CLK */ PAD_CFG_NF(GPP_G6, NONE, DEEP, NF1),
+/* SD_WP */ PAD_CFG_NF(GPP_G7, UP_20K, DEEP, NF1),
+
+/* BATLOW# */ PAD_CFG_NC(GPD0),
+/* ACPRESENT */ PAD_CFG_NF(GPD1, NONE, PWROK, NF1),
+/* LAN_WAKE# */ PAD_CFG_NC(GPD2),
+/* PWRBTN# */ PAD_CFG_NF(GPD3, UP_20K, PWROK, NF1),
+/* SLP_S3# */ PAD_CFG_NF(GPD4, NONE, PWROK, NF1),
+/* SLP_S4# */ PAD_CFG_NF(GPD5, NONE, PWROK, NF1),
+/* SLP_A# */ PAD_CFG_NF(GPD6, NONE, PWROK, NF1),
+/* RSVD */ PAD_CFG_NC(GPD7),
+/* SUSCLK */ PAD_CFG_NF(GPD8, NONE, PWROK, NF1),
+/* SLP_WLAN# */ PAD_CFG_NF(GPD9, NONE, PWROK, NF1),
+/* SLP_S5# */ PAD_CFG_NF(GPD10, NONE, PWROK, NF1),
+/* LANPHYC */ PAD_CFG_NF(GPD11, NONE, DEEP, NF1),
+};
+
+#endif
+
+#endif
diff --git a/src/mainboard/libretrend/lt1000/ramstage.c b/src/mainboard/libretrend/lt1000/ramstage.c
new file mode 100644
index 0000000000..e9eb80afa2
--- /dev/null
+++ b/src/mainboard/libretrend/lt1000/ramstage.c
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* This file is part of the coreboot project. */
+
+#include <soc/ramstage.h>
+
+#include "gpio.h"
+
+void mainboard_silicon_init_params(FSP_SIL_UPD *params)
+{
+ /*
+ * Configure pads prior to SiliconInit() in case there are any
+ * dependencies during hardware initialization.
+ */
+ gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table));
+}
diff --git a/src/mainboard/libretrend/lt1000/romstage.c b/src/mainboard/libretrend/lt1000/romstage.c
new file mode 100644
index 0000000000..510038b3b7
--- /dev/null
+++ b/src/mainboard/libretrend/lt1000/romstage.c
@@ -0,0 +1,63 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* This file is part of the coreboot project. */
+
+#include <soc/romstage.h>
+#include <spd_bin.h>
+#include <string.h>
+
+static void mainboard_fill_dq_map_data(void *dq_map_ch0, void *dq_map_ch1)
+{
+ const u8 dq_map[2][12] = {
+ { 0x0F, 0xF0, 0x00, 0xF0, 0x0F, 0xF0,
+ 0x0F, 0x00, 0xFF, 0x00, 0xFF, 0x00 },
+ { 0x33, 0xCC, 0x00, 0xCC, 0x33, 0xCC,
+ 0x33, 0x00, 0xFF, 0x00, 0xFF, 0x00 } };
+ memcpy(dq_map_ch0, dq_map[0], sizeof(dq_map[0]));
+ memcpy(dq_map_ch1, dq_map[1], sizeof(dq_map[1]));
+}
+
+static void mainboard_fill_dqs_map_data(void *dqs_map_ch0, void *dqs_map_ch1)
+{
+ const u8 dqs_map[2][8] = {
+ { 0, 1, 2, 3, 4, 5, 6, 7 },
+ { 1, 0, 2, 3, 4, 5, 6, 7 } };
+ memcpy(dqs_map_ch0, dqs_map[0], sizeof(dqs_map[0]));
+ memcpy(dqs_map_ch1, dqs_map[1], sizeof(dqs_map[1]));
+}
+
+static void mainboard_fill_rcomp_res_data(void *rcomp_ptr)
+{
+ const u16 RcompResistor[3] = { 121, 81, 100 };
+ memcpy(rcomp_ptr, RcompResistor, sizeof(RcompResistor));
+}
+
+static void mainboard_fill_rcomp_strength_data(void *rcomp_strength_ptr)
+{
+ const u16 RcompTarget[5] = { 100, 40, 20, 20, 26 };
+ memcpy(rcomp_strength_ptr, RcompTarget, sizeof(RcompTarget));
+}
+
+void mainboard_memory_init_params(FSPM_UPD *mupd)
+{
+ FSP_M_CONFIG *mem_cfg;
+ mem_cfg = &mupd->FspmConfig;
+
+ mainboard_fill_dq_map_data(&mem_cfg->DqByteMapCh0, &mem_cfg->DqByteMapCh1);
+ mainboard_fill_dqs_map_data(&mem_cfg->DqsMapCpu2DramCh0, &mem_cfg->DqsMapCpu2DramCh1);
+ mainboard_fill_rcomp_res_data(&mem_cfg->RcompResistor);
+ mainboard_fill_rcomp_strength_data(&mem_cfg->RcompTarget);
+
+ struct spd_block blk = {
+ .addr_map = { 0x50, 0x52, },
+ };
+
+ mem_cfg->DqPinsInterleaved = 1;
+ mem_cfg->CaVrefConfig = 2;
+
+ get_spd_smbus(&blk);
+ dump_spd_info(&blk);
+
+ mem_cfg->MemorySpdDataLen = blk.len;
+ mem_cfg->MemorySpdPtr00 = (uintptr_t)blk.spd_array[0];
+ mem_cfg->MemorySpdPtr10 = (uintptr_t)blk.spd_array[1];
+}