summaryrefslogtreecommitdiff
path: root/src/mainboard/lippert/hurricane-lx/mainboard.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/lippert/hurricane-lx/mainboard.c')
-rw-r--r--src/mainboard/lippert/hurricane-lx/mainboard.c83
1 files changed, 0 insertions, 83 deletions
diff --git a/src/mainboard/lippert/hurricane-lx/mainboard.c b/src/mainboard/lippert/hurricane-lx/mainboard.c
deleted file mode 100644
index 0f210cb200..0000000000
--- a/src/mainboard/lippert/hurricane-lx/mainboard.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2010 LiPPERT Embedded Computers GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* Based on mainboard.c from the SpaceRunner-LX mainboard. */
-
-#include <stdlib.h>
-#include <stdint.h>
-#include <console/console.h>
-#include <device/device.h>
-#include <arch/io.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-
-/* Bit1 switches Com1 to RS485, bit2 same for Com2. */
-#if IS_ENABLED(CONFIG_ONBOARD_UARTS_RS485)
- #define SIO_GP1X_CONFIG 0x06
-#else
- #define SIO_GP1X_CONFIG 0x00
-#endif
-
-static const u16 ec_init_table[] = { /* hi = data, lo = index */
- 0x1900, /* Enable monitoring */
- 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */
- 0x805C, /* Unlock zero adjust */
- 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */
- 0x005C, /* Lock zero adjust */
- 0xD014 /* Also set FAN_CTL polarity to Active High */
-};
-
-static void init(struct device *dev)
-{
- unsigned int gpio_base, i;
- printk(BIOS_DEBUG, "LiPPERT Hurricane-LX ENTER %s\n", __func__);
-
- /* Init CS5536 GPIOs */
- gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD,
- PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1;
-
- outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD#
- outl(0x00000040, gpio_base + 0x08); // GPIO6 open drain 1 - LAN_PD# (jumpered GPIO per default)
- outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD#
- outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM#
- outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM#
-#if !IS_ENABLED(CONFIG_BOARD_OLD_REVISION)
- outl(0x00000800, gpio_base + 0x94); // GPIO27 out aux2 1 - 32kHz
- outl(0x00000800, gpio_base + 0x84); // GPIO27 output 1 - 32kHz
-#endif
- outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - 32kHz (new) / PM-LED (old)
-
- /* Init Environment Controller. */
- for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) {
- u16 val = ec_init_table[i];
- outb((u8)val, 0x0295);
- outb(val >> 8, 0x0296);
- }
-
- /* bit2 = RS485_EN2, bit1 = RS485_EN1 */
- outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */
-
- printk(BIOS_DEBUG, "LiPPERT Hurricane-LX EXIT %s\n", __func__);
-}
-
-static void mainboard_enable(struct device *dev)
-{
- dev->ops->init = init;
-}
-
-struct chip_operations mainboard_ops = {
- .enable_dev = mainboard_enable,
-};