diff options
Diffstat (limited to 'src/mainboard/lippert/hurricane-lx/mainboard.c')
| -rw-r--r-- | src/mainboard/lippert/hurricane-lx/mainboard.c | 83 |
1 files changed, 0 insertions, 83 deletions
diff --git a/src/mainboard/lippert/hurricane-lx/mainboard.c b/src/mainboard/lippert/hurricane-lx/mainboard.c deleted file mode 100644 index 0f210cb200..0000000000 --- a/src/mainboard/lippert/hurricane-lx/mainboard.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2010 LiPPERT Embedded Computers GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Based on mainboard.c from the SpaceRunner-LX mainboard. */ - -#include <stdlib.h> -#include <stdint.h> -#include <console/console.h> -#include <device/device.h> -#include <arch/io.h> -#include <device/pci.h> -#include <device/pci_ids.h> - -/* Bit1 switches Com1 to RS485, bit2 same for Com2. */ -#if IS_ENABLED(CONFIG_ONBOARD_UARTS_RS485) - #define SIO_GP1X_CONFIG 0x06 -#else - #define SIO_GP1X_CONFIG 0x00 -#endif - -static const u16 ec_init_table[] = { /* hi = data, lo = index */ - 0x1900, /* Enable monitoring */ - 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ - 0x805C, /* Unlock zero adjust */ - 0x7056, 0x3C57, /* Zero adjust TMPIN1,2 */ - 0x005C, /* Lock zero adjust */ - 0xD014 /* Also set FAN_CTL polarity to Active High */ -}; - -static void init(struct device *dev) -{ - unsigned int gpio_base, i; - printk(BIOS_DEBUG, "LiPPERT Hurricane-LX ENTER %s\n", __func__); - - /* Init CS5536 GPIOs */ - gpio_base = pci_read_config32(dev_find_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_AMD_CS5536_ISA, 0), PCI_BASE_ADDRESS_1) - 1; - - outl(0x00000040, gpio_base + 0x00); // GPIO6 value 1 - LAN_PD# - outl(0x00000040, gpio_base + 0x08); // GPIO6 open drain 1 - LAN_PD# (jumpered GPIO per default) - outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD# - outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM# - outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM# -#if !IS_ENABLED(CONFIG_BOARD_OLD_REVISION) - outl(0x00000800, gpio_base + 0x94); // GPIO27 out aux2 1 - 32kHz - outl(0x00000800, gpio_base + 0x84); // GPIO27 output 1 - 32kHz -#endif - outl(0x08000000, gpio_base + 0x98); // GPIO27 pull up 0 - 32kHz (new) / PM-LED (old) - - /* Init Environment Controller. */ - for (i = 0; i < ARRAY_SIZE(ec_init_table); i++) { - u16 val = ec_init_table[i]; - outb((u8)val, 0x0295); - outb(val >> 8, 0x0296); - } - - /* bit2 = RS485_EN2, bit1 = RS485_EN1 */ - outb(SIO_GP1X_CONFIG, 0x1220); /* Simple-I/O GP17-10 */ - - printk(BIOS_DEBUG, "LiPPERT Hurricane-LX EXIT %s\n", __func__); -} - -static void mainboard_enable(struct device *dev) -{ - dev->ops->init = init; -} - -struct chip_operations mainboard_ops = { - .enable_dev = mainboard_enable, -}; |