diff options
Diffstat (limited to 'src/mainboard/lippert/literunner-lx')
| -rw-r--r-- | src/mainboard/lippert/literunner-lx/mainboard.c | 2 | ||||
| -rw-r--r-- | src/mainboard/lippert/literunner-lx/romstage.c | 6 |
2 files changed, 4 insertions, 4 deletions
diff --git a/src/mainboard/lippert/literunner-lx/mainboard.c b/src/mainboard/lippert/literunner-lx/mainboard.c index 1a569e2b58..e4084b5cbc 100644 --- a/src/mainboard/lippert/literunner-lx/mainboard.c +++ b/src/mainboard/lippert/literunner-lx/mainboard.c @@ -34,7 +34,7 @@ /* Bit0 enables COM3's transceiver, bit1 disables the RS485 receiver (e.g. for IR). */ #define SIO_GP2X_CONFIG 0x00 -static const u16 ec_init_table[] = { /* hi=data, lo=index */ +static const u16 ec_init_table[] = { /* hi = data, lo = index */ 0x1900, /* Enable monitoring */ 0x3050, /* VIN4,5 enabled */ 0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */ diff --git a/src/mainboard/lippert/literunner-lx/romstage.c b/src/mainboard/lippert/literunner-lx/romstage.c index efe322c019..2f6aa469a0 100644 --- a/src/mainboard/lippert/literunner-lx/romstage.c +++ b/src/mainboard/lippert/literunner-lx/romstage.c @@ -115,7 +115,7 @@ static int smc_send_config(unsigned char config_data) #include "cpu/amd/geode_lx/syspreinit.c" #include "cpu/amd/geode_lx/msrinit.c" -static const u16 sio_init_table[] = { // hi=data, lo=index +static const u16 sio_init_table[] = { // hi = data, lo = index 0x072C, // VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 internal 0x1423, // don't delay PoWeROK1/2 0x9072, // watchdog triggers PWROK, counts seconds @@ -123,7 +123,7 @@ static const u16 sio_init_table[] = { // hi=data, lo=index 0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0 #endif 0xBF25, 0x172A, 0xF326, // select GPIO function for most pins - 0xFF27, 0xDF28, 0x2729, // (GP45=SUSB, GP23,22,16,15=SPI, GP13=PWROK1) + 0xFF27, 0xDF28, 0x2729, // (GP45 = SUSB, GP23,22,16,15 = SPI, GP13 = PWROK1) 0x66B8, 0x0FB9, // enable pullups on SPI, RS485_EN, COM3_R/TX_EN 0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, LIVE_LED 0x03C1, // enable Simple-I/O for GP21-20= COM3_RX_EN,TX_EN @@ -131,7 +131,7 @@ static const u16 sio_init_table[] = { // hi=data, lo=index 0x07C8, // config GP12-10 as output 0x03C9, // config GP21-20 as output 0x2DF5, // map Hw Monitor Thermal Output to GP55 - 0x08F8, // map GP LED Blinking 1 to GP10=LIVE_LED (deactivate Simple I/O to use) + 0x08F8, // map GP LED Blinking 1 to GP10 = LIVE_LED (deactivate Simple I/O to use) }; /* Early mainboard specific GPIO setup. */ |