summaryrefslogtreecommitdiff
path: root/src/mainboard/lippert/roadrunner-lx
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/lippert/roadrunner-lx')
-rw-r--r--src/mainboard/lippert/roadrunner-lx/mainboard.c2
-rw-r--r--src/mainboard/lippert/roadrunner-lx/romstage.c6
2 files changed, 4 insertions, 4 deletions
diff --git a/src/mainboard/lippert/roadrunner-lx/mainboard.c b/src/mainboard/lippert/roadrunner-lx/mainboard.c
index cd83768598..1d35ebe464 100644
--- a/src/mainboard/lippert/roadrunner-lx/mainboard.c
+++ b/src/mainboard/lippert/roadrunner-lx/mainboard.c
@@ -31,7 +31,7 @@
#define SIO_GP1X_CONFIG 0x20
#endif
-static const u16 ec_init_table[] = { /* hi=data, lo=index */
+static const u16 ec_init_table[] = { /* hi = data, lo = index */
0x1900, /* Enable monitoring */
0x0351, /* TMPIN1,2 diode mode, TMPIN3 off */
0x805C, /* Unlock zero adjust */
diff --git a/src/mainboard/lippert/roadrunner-lx/romstage.c b/src/mainboard/lippert/roadrunner-lx/romstage.c
index d70e2c1835..7e0e2a5e01 100644
--- a/src/mainboard/lippert/roadrunner-lx/romstage.c
+++ b/src/mainboard/lippert/roadrunner-lx/romstage.c
@@ -52,7 +52,7 @@ int spd_read_byte(unsigned int device, unsigned int address)
#include "cpu/amd/geode_lx/syspreinit.c"
#include "cpu/amd/geode_lx/msrinit.c"
-static const u16 sio_init_table[] = { // hi=data, lo=index
+static const u16 sio_init_table[] = { // hi = data, lo = index
0x1E2C, // disable ATXPG; VIN6,FAN4/5,VIN3 enabled, VIN7 internal
0x1423, // don't delay PoWeROK1/2 - triggers 2nd reset
0x9072, // watchdog triggers PWROK, counts seconds
@@ -60,13 +60,13 @@ static const u16 sio_init_table[] = { // hi=data, lo=index
0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0
#endif
0xBF25, 0x372A, 0xF326, // select GPIO function for most pins
- 0xBF27, 0xFF28, 0x2529, // (GP36=FAN_CTL3, GP13=PWROK1)
+ 0xBF27, 0xFF28, 0x2529, // (GP36 = FAN_CTL3, GP13 = PWROK1)
0x46B8, 0x0CB9, // enable pullups on RS485_EN
0x36C0, // enable Simple-I/O for GP15,14,12,11= LIVE_LED, WD_ACTIVE, RS485_EN2,1
0xFFC3, // enable Simple-I/O for GP47-40 (GPIOs on Supervisory Connector)
0x26C8, // config GP15,12,11 as output; GP14 as input
0x2DF5, // map Hw Monitor Thermal Output to GP55
- 0x0DF8, // map GP LED Blinking 1 to GP15=LIVE_LED (deactivate Simple-I/O to use)
+ 0x0DF8, // map GP LED Blinking 1 to GP15 = LIVE_LED (deactivate Simple-I/O to use)
};
/* Early mainboard specific GPIO setup. */