diff options
Diffstat (limited to 'src/mainboard/lippert/roadrunner-lx')
| -rw-r--r-- | src/mainboard/lippert/roadrunner-lx/Config.lb | 198 | ||||
| -rw-r--r-- | src/mainboard/lippert/roadrunner-lx/Options.lb | 206 |
2 files changed, 0 insertions, 404 deletions
diff --git a/src/mainboard/lippert/roadrunner-lx/Config.lb b/src/mainboard/lippert/roadrunner-lx/Config.lb deleted file mode 100644 index ed6d61eec0..0000000000 --- a/src/mainboard/lippert/roadrunner-lx/Config.lb +++ /dev/null @@ -1,198 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2008 LiPPERT Embedded Computers GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -## Based on Config.lb from AMD's DB800 and DBM690T mainboards. - -## CONFIG_XIP_ROM_SIZE must be a power of 2. -default CONFIG_XIP_ROM_SIZE = 64 * 1024 -include /config/nofailovercalculation.lb - -## -## Set all of the defaults for an x86 architecture -## - -arch i386 end - -## -## Build the objects we have code for in this directory. -## - -driver mainboard.o - -if CONFIG_GENERATE_PIRQ_TABLE - object irq_tables.o -end - - # compile cache_as_ram.c to auto.inc - makerule ./cache_as_ram_auto.inc - depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c" - action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@" - action "perl -e 's/.rodata/.rom.data/g' -pi $@" - action "perl -e 's/.text/.section .rom.text/g' -pi $@" - end - -## -## Build our 16 bit and 32 bit coreboot entry code -## -mainboardinit cpu/x86/16bit/entry16.inc -mainboardinit cpu/x86/32bit/entry32.inc -ldscript /cpu/x86/16bit/entry16.lds -ldscript /cpu/x86/32bit/entry32.lds - -## -## Build our reset vector (This is where coreboot is entered) -## -if CONFIG_USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/reset16.inc - ldscript /cpu/x86/16bit/reset16.lds -else - mainboardinit cpu/x86/32bit/reset32.inc - ldscript /cpu/x86/32bit/reset32.lds -end - -### Should this be in the northbridge code? -#not in serengeti_cheetah mainboardinit arch/i386/lib/cpu_reset.inc - -## -## Include an id string (For safe flashing) -## -mainboardinit arch/i386/lib/id.inc -ldscript /arch/i386/lib/id.lds - -### -### This is the early phase of coreboot startup -### Things are delicate and we test to see if we should -### failover to another image. -### -if CONFIG_USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds -# mainboardinit ./failover.inc -end - -### -### O.k. We aren't just an intermediary anymore! -### - -## -## Setup RAM -## -mainboardinit cpu/x86/fpu_enable.inc - - mainboardinit cpu/amd/model_lx/cache_as_ram.inc - mainboardinit ./cache_as_ram_auto.inc - -## -## Include the secondary configuration files -## -dir /pc80 -config chip.h - -# Bit1 switches Com1 to RS485, bit2 same for Com2, bit5 turns off Live LED. -register "sio_gp1x_config" = "0x20" - -chip northbridge/amd/lx - device pci_domain 0 on - device pci 1.0 on end # Northbridge - device pci 1.1 on end # Graphics - device pci 1.2 on end # AES - chip southbridge/amd/cs5536 # Southbridge - # IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK - # SIRQ Mode = Active(Quiet) mode. Save power... - # Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse, - # UARTs, etc IRQs. OK - register "lpc_serirq_enable" = "0x000012DA" # 00010010 11011010 - register "lpc_serirq_polarity" = "0x0000ED25" # inverse of above - register "lpc_serirq_mode" = "1" - register "enable_gpio_int_route" = "0x0D0C0700" - register "enable_ide_nand_flash" = "0" # 0:ide mode, 1:flash - register "enable_USBP4_device" = "0" # 0: host, 1:device - register "enable_USBP4_overcurrent" = "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381) - register "com1_enable" = "0" - register "com1_address" = "0x3E8" - register "com1_irq" = "6" - register "com2_enable" = "0" - register "com2_address" = "0x2E8" - register "com2_irq" = "6" - register "unwanted_vpci[0]" = "0" # End of list has a zero - device pci 8.0 on end # Slot4 - device pci 9.0 on end # Slot3 - device pci a.0 on end # Slot2 - device pci b.0 on end # Slot1 - device pci c.0 on end # IT8888 - device pci e.0 on end # Ethernet - device pci f.0 on # ISA bridge - chip superio/ite/it8712f - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.2 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.4 on # EC - io 0x60 = 0x290 - io 0x62 = 0x230 - irq 0x70 = 9 - end - device pnp 2e.5 on # PS/2 keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.6 on # PS/2 mouse - irq 0x70 = 12 - end - device pnp 2e.7 on # GPIO - io 0x62 = 0x1220 - # io 0x64 = 0x1200 - end - device pnp 2e.8 off # MIDI - io 0x60 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.9 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.a off end # CIR - end - end - device pci f.2 on end # IDE controller - device pci f.3 on end # Audio - device pci f.4 on end # OHCI - device pci f.5 on end # EHCI - end - end - # APIC cluster is late CPU init. - device apic_cluster 0 on - chip cpu/amd/model_lx - device apic 0 on end - end - end -end diff --git a/src/mainboard/lippert/roadrunner-lx/Options.lb b/src/mainboard/lippert/roadrunner-lx/Options.lb deleted file mode 100644 index b9ca9db796..0000000000 --- a/src/mainboard/lippert/roadrunner-lx/Options.lb +++ /dev/null @@ -1,206 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2008 LiPPERT Embedded Computers GmbH -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -## Based on Options.lb from AMD's DB800 mainboard. - -uses CONFIG_GENERATE_MP_TABLE -uses CONFIG_GENERATE_PIRQ_TABLE -uses CONFIG_USE_FALLBACK_IMAGE -uses CONFIG_HAVE_FALLBACK_BOOT -uses CONFIG_HAVE_HARD_RESET -uses CONFIG_HAVE_OPTION_TABLE -uses CONFIG_USE_OPTION_TABLE -uses CONFIG_ROM_PAYLOAD -uses CONFIG_IRQ_SLOT_COUNT -uses CONFIG_MAINBOARD -uses CONFIG_MAINBOARD_VENDOR -uses CONFIG_MAINBOARD_PART_NUMBER -uses COREBOOT_EXTRA_VERSION -uses CONFIG_ARCH -uses CONFIG_FALLBACK_SIZE -uses CONFIG_STACK_SIZE -uses CONFIG_HEAP_SIZE -uses CONFIG_ROM_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_IMAGE_SIZE -uses CONFIG_ROM_SECTION_SIZE -uses CONFIG_ROM_SECTION_OFFSET -uses CONFIG_COMPRESS -uses CONFIG_COMPRESSED_PAYLOAD_NRV2B -uses CONFIG_COMPRESSED_PAYLOAD_LZMA -uses CONFIG_PRECOMPRESSED_PAYLOAD -uses CONFIG_ROMBASE -uses CONFIG_RAMBASE -uses CONFIG_XIP_ROM_SIZE -uses CONFIG_XIP_ROM_BASE -uses CONFIG_GENERATE_MP_TABLE -uses CONFIG_CROSS_COMPILE -uses CC -uses HOSTCC -uses CONFIG_OBJCOPY -uses CONFIG_DEBUG -uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL -uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL -uses CONFIG_CONSOLE_SERIAL8250 -uses CONFIG_TTYS0_BAUD -uses CONFIG_TTYS0_BASE -uses CONFIG_TTYS0_LCS -uses CONFIG_UDELAY_TSC -uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 -uses CONFIG_CONSOLE_VGA -uses CONFIG_PCI_ROM_RUN -uses CONFIG_VIDEO_MB -uses CONFIG_USE_DCACHE_RAM -uses CONFIG_DCACHE_RAM_BASE -uses CONFIG_DCACHE_RAM_SIZE -uses CONFIG_USE_PRINTK_IN_CAR -uses CONFIG_PIRQ_ROUTE - -## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. -default CONFIG_ROM_SIZE = 512 * 1024 - -### -### Build options -### -default CONFIG_CONSOLE_VGA = 0 -default CONFIG_VIDEO_MB = 8 -default CONFIG_PCI_ROM_RUN = 0 - -## -## Build code for the fallback boot -## -default CONFIG_HAVE_FALLBACK_BOOT = 1 - -## -## no MP table -## -default CONFIG_GENERATE_MP_TABLE = 0 - -## -## Build code to reset the motherboard from coreboot -## -default CONFIG_HAVE_HARD_RESET = 0 - -## Delay timer options -## -default CONFIG_UDELAY_TSC = 1 -default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1 - -## -## Build code to export a programmable irq routing table -## -default CONFIG_GENERATE_PIRQ_TABLE = 1 -default CONFIG_IRQ_SLOT_COUNT = 7 -default CONFIG_PIRQ_ROUTE = 1 - -## -## Build code to export a CMOS option table -## -default CONFIG_HAVE_OPTION_TABLE = 0 - -### -### coreboot layout values -### - -## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy. -default CONFIG_ROM_IMAGE_SIZE = 64 * 1024 -default CONFIG_FALLBACK_SIZE = CONFIG_ROM_IMAGE_SIZE - -## -## enable CACHE_AS_RAM specifics -## -default CONFIG_USE_DCACHE_RAM = 1 -default CONFIG_DCACHE_RAM_BASE = 0xc8000 -default CONFIG_DCACHE_RAM_SIZE = 0x08000 -default CONFIG_USE_PRINTK_IN_CAR=1 - -## -## Use a small 8K stack -## -default CONFIG_STACK_SIZE = 8 * 1024 - -## -## Use a small 16K heap -## -default CONFIG_HEAP_SIZE = 16 * 1024 - -## -## Only use the option table in a normal image -## -#default CONFIG_USE_OPTION_TABLE = !CONFIG_USE_FALLBACK_IMAGE -default CONFIG_USE_OPTION_TABLE = 0 - -default CONFIG_RAMBASE = 0x00004000 - -default CONFIG_ROM_PAYLOAD = 1 - -## -## The default compiler -## -default CONFIG_CROSS_COMPILE = "" -default CC = "$(CONFIG_CROSS_COMPILE)gcc -m32" -default HOSTCC = "gcc" - -## -## The Serial Console -## - -# To Enable the Serial Console -default CONFIG_CONSOLE_SERIAL8250 = 1 - -## Select the serial console baud rate -default CONFIG_TTYS0_BAUD = 115200 -#default CONFIG_TTYS0_BAUD = 57600 -#default CONFIG_TTYS0_BAUD = 38400 -#default CONFIG_TTYS0_BAUD = 19200 -#default CONFIG_TTYS0_BAUD = 9600 -#default CONFIG_TTYS0_BAUD = 4800 -#default CONFIG_TTYS0_BAUD = 2400 -#default CONFIG_TTYS0_BAUD = 1200 - -# Select the serial console base port -default CONFIG_TTYS0_BASE = 0x3f8 - -# Select the serial protocol -# This defaults to 8 data bits, 1 stop bit, and no parity -default CONFIG_TTYS0_LCS = 0x3 - -# Compile extra debugging code -default CONFIG_DEBUG = 1 - -## -### Select the coreboot loglevel -## -## EMERG 1 system is unusable -## ALERT 2 action must be taken immediately -## CRIT 3 critical conditions -## ERR 4 error conditions -## WARNING 5 warning conditions -## NOTICE 6 normal but significant condition -## INFO 7 informational -## CONFIG_DEBUG 8 debug-level messages -## SPEW 9 Way too many details - -## Request this level of debugging output -default CONFIG_DEFAULT_CONSOLE_LOGLEVEL = 8 -## At a maximum only compile in this level of debugging -default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL = 8 - -end |