diff options
Diffstat (limited to 'src/mainboard/lippert/toucan-af/devicetree.cb')
| -rw-r--r-- | src/mainboard/lippert/toucan-af/devicetree.cb | 154 |
1 files changed, 154 insertions, 0 deletions
diff --git a/src/mainboard/lippert/toucan-af/devicetree.cb b/src/mainboard/lippert/toucan-af/devicetree.cb new file mode 100644 index 0000000000..d108a11e5d --- /dev/null +++ b/src/mainboard/lippert/toucan-af/devicetree.cb @@ -0,0 +1,154 @@ +# +# This file is part of the coreboot project. +# +# Copyright (C) 2011 Advanced Micro Devices, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; version 2 of the License. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +chip northbridge/amd/agesa/family14/root_complex + device cpu_cluster 0 on + chip cpu/amd/agesa/family14 + device lapic 0 on end + end + end + device domain 0 on + subsystemid 0x1022 0x1510 inherit + chip northbridge/amd/agesa/family14 # CPU side of HT root complex +# device pci 18.0 on # northbridge + chip northbridge/amd/agesa/family14 # PCI side of HT root complex + device pci 0.0 on end # Root Complex + device pci 1.0 on end # Internal Graphics P2P bridge 0x980[2456] + device pci 4.0 on end # PCIE P2P bridge on-board NIC + device pci 5.0 off end # PCIE P2P bridge + device pci 6.0 on end # PCIE P2P bridge PCIe slot + device pci 7.0 off end # PCIE P2P bridge + device pci 8.0 off end # NB/SB Link P2P bridge + end # agesa northbridge + + chip southbridge/amd/cimx/sb800 # it is under NB/SB Link, but on the same pri bus + device pci 11.0 on end # SATA + device pci 12.0 on end # OHCI USB 0-4 + device pci 12.2 on end # EHCI USB 0-4 + device pci 13.0 on end # OHCI USB 5-9 + device pci 13.2 on end # EHCI USB 5-9 + device pci 14.0 on # SM + chip drivers/generic/generic #dimm 0-0-0 + device i2c 50 on end + end + chip drivers/generic/generic #dimm 0-0-1 + device i2c 51 on end + end + end # SM + device pci 14.1 on end # IDE 0x439c + device pci 14.2 on end # HDA 0x4383 + device pci 14.3 on # LPC 0x439d + chip superio/fintek/f81865f + device pnp 4e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 4e.3 off end # Parallel Port + device pnp 4e.4 off end # Hardware Monitor + device pnp 4e.5 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 4e.6 off end # GPIO + device pnp 4e.a off end # PME + device pnp 4e.10 on # COM1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 4e.11 on # COM2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + end # f81865f + end #LPC + device pci 14.4 on end # PCIB 0x4384, NOTE: PCI interface pins shared with GPIO {GPIO 35:0} + device pci 14.5 off end # OHCI FS/LS USB + device pci 14.6 off end # Hudson-E1 GbE MAC: Broadcom BCM5785 (14E4:1699) + device pci 15.0 off end # PCIe PortA + device pci 15.1 off end # PCIe PortB + device pci 15.2 off end # PCIe PortC + device pci 15.3 off end # PCIe PortD + device pci 16.0 off end # OHCI USB 10-13 + device pci 16.2 off end # EHCI USB 10-13 + register "gpp_configuration" = "0" #4:0:0:0 (really need to disable all 4 somehow) + register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE + + #set up SB800 Fan control registers and IMC fan controls + register "imc_port_address" = "0x6E" # 0x2E and 0x6E are common + register "fan0_enabled" = "1" + register "fan1_enabled" = "1" + register "imc_fan_zone0_enabled" = "1" + register "imc_fan_zone1_enabled" = "1" + + register "fan0_config_vals" = "{ \ + FAN_INPUT_INTERNAL_DIODE, FAN_POLARITY_HIGH, \ + FREQ_25KHZ, 0x08, 0x00, 0x00, 0x00, 0x00,\ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }" + register "fan1_config_vals" = "{ \ + FAN_INPUT_INTERNAL_DIODE, FAN_POLARITY_HIGH, \ + FREQ_25KHZ, 0x10, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }" + + register "imc_zone0_mode1" = " \ + IMC_MODE1_FAN_ENABLED | IMC_MODE1_FAN_IMC_CONTROLLED | \ + IMC_MODE1_FAN_STEP_MODE | IMC_MODE1_FANOUT0" + register "imc_zone0_mode2" = " IMC_MODE2_TEMPIN_SB_TSI | \ + IMC_MODE2_FANIN0 | IMC_MODE2_TEMP_AVERAGING_DISABLED" + register "imc_zone0_temp_offset" = "0x00" # No temp offset + register "imc_zone0_hysteresis" = "0x05" # Degrees C Hysteresis + register "imc_zone0_smbus_addr" = "0x98" # Temp Sensor SMBus address + register "imc_zone0_smbus_num" = "IMC_TEMP_SENSOR_ON_SMBUS_3" # SMBUS number + register "imc_zone0_pwm_step" = "0x01" # Fan PWM stepping rate + register "imc_zone0_ramping" = "0x00" # Disable Fan PWM ramping and stepping + + register "imc_zone1_mode1" = " \ + IMC_MODE1_FAN_ENABLED | IMC_MODE1_FAN_IMC_CONTROLLED | \ + IMC_MODE1_FAN_STEP_MODE | IMC_MODE1_FANOUT1" + register "imc_zone1_mode2" = " IMC_MODE2_TEMPIN_SB_TSI | \ + IMC_MODE2_FANIN1 | IMC_MODE2_TEMP_AVERAGING_DISABLED" + register "imc_zone1_temp_offset" = "0x00" # No temp offset + register "imc_zone1_hysteresis" = "0x05" # Degrees C Hysteresis + register "imc_zone1_smbus_addr" = "0x98" # Temp Sensor SMBus address + register "imc_zone1_smbus_num" = "IMC_TEMP_SENSOR_ON_SMBUS_3" # SMBUS number + register "imc_zone1_pwm_step" = "0x01" # Fan PWM stepping rate + register "imc_zone1_ramping" = "0x00" # Disable Fan PWM ramping and stepping + + # T56N has a Maximum operating temperature of 90C + # ZONEX_THRESHOLDS - _AC0 - _AC7, _CRT - Temp Threshold in degrees C + # ZONEX_FANSPEEDS - Fan speeds as a "percentage" + register "imc_zone0_thresholds" = "{ 87, 82, 77, 72, 65, 1, 0, 0, 90 }" + register "imc_zone0_fanspeeds" = "{100, 7, 5, 4, 3, 2, 0, 0 }" + register "imc_zone1_thresholds" = "{ 85, 80, 75, 65, 1, 0, 0, 0, 90 }" + register "imc_zone1_fanspeeds" = "{100, 10, 6, 4, 3, 0, 0, 0 }" + + end #southbridge/amd/cimx/sb800 +# end # device pci 18.0 +# These seem unnecessary + device pci 18.0 on end + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + device pci 18.4 on end + device pci 18.5 on end + device pci 18.6 on end + device pci 18.7 on end + end #chip northbridge/amd/agesa/family14 # CPU side of HT root complex + end #domain +end #northbridge/amd/agesa/family14/root_complex |