summaryrefslogtreecommitdiff
path: root/src/mainboard/lippert
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/lippert')
-rw-r--r--src/mainboard/lippert/frontrunner/romstage.c2
-rw-r--r--src/mainboard/lippert/hurricane-lx/mainboard.c4
-rw-r--r--src/mainboard/lippert/hurricane-lx/romstage.c8
-rw-r--r--src/mainboard/lippert/literunner-lx/mainboard.c2
-rw-r--r--src/mainboard/lippert/literunner-lx/romstage.c6
-rw-r--r--src/mainboard/lippert/roadrunner-lx/mainboard.c2
-rw-r--r--src/mainboard/lippert/roadrunner-lx/romstage.c2
-rw-r--r--src/mainboard/lippert/spacerunner-lx/mainboard.c2
-rw-r--r--src/mainboard/lippert/spacerunner-lx/romstage.c6
9 files changed, 17 insertions, 17 deletions
diff --git a/src/mainboard/lippert/frontrunner/romstage.c b/src/mainboard/lippert/frontrunner/romstage.c
index d44cbf3259..e7fcbda8da 100644
--- a/src/mainboard/lippert/frontrunner/romstage.c
+++ b/src/mainboard/lippert/frontrunner/romstage.c
@@ -50,7 +50,7 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
if (device != DIMM0)
return 0xFF; /* No DIMM1, don't even try. */
-#if CONFIG_DEBUG_SMBUS
+#if IS_ENABLED(CONFIG_DEBUG_SMBUS)
if (address >= sizeof(spdbytes) || spdbytes[address] == 0xFF) {
printk(BIOS_ERR, "ERROR: spd_read_byte(DIMM0, 0x%02x) "
"returns 0xff\n", address);
diff --git a/src/mainboard/lippert/hurricane-lx/mainboard.c b/src/mainboard/lippert/hurricane-lx/mainboard.c
index 3d32113858..0f210cb200 100644
--- a/src/mainboard/lippert/hurricane-lx/mainboard.c
+++ b/src/mainboard/lippert/hurricane-lx/mainboard.c
@@ -25,7 +25,7 @@
#include <device/pci_ids.h>
/* Bit1 switches Com1 to RS485, bit2 same for Com2. */
-#if CONFIG_ONBOARD_UARTS_RS485
+#if IS_ENABLED(CONFIG_ONBOARD_UARTS_RS485)
#define SIO_GP1X_CONFIG 0x06
#else
#define SIO_GP1X_CONFIG 0x00
@@ -54,7 +54,7 @@ static void init(struct device *dev)
outl(0x00000040, gpio_base + 0x04); // GPIO6 output 1 - LAN_PD#
outl(0x00000400, gpio_base + 0x34); // GPIO10 in aux1 1 - THRM_ALRM#
outl(0x00000400, gpio_base + 0x20); // GPIO10 input 1 - THRM_ALRM#
-#if !CONFIG_BOARD_OLD_REVISION
+#if !IS_ENABLED(CONFIG_BOARD_OLD_REVISION)
outl(0x00000800, gpio_base + 0x94); // GPIO27 out aux2 1 - 32kHz
outl(0x00000800, gpio_base + 0x84); // GPIO27 output 1 - 32kHz
#endif
diff --git a/src/mainboard/lippert/hurricane-lx/romstage.c b/src/mainboard/lippert/hurricane-lx/romstage.c
index b76960f95f..9d7b565da1 100644
--- a/src/mainboard/lippert/hurricane-lx/romstage.c
+++ b/src/mainboard/lippert/hurricane-lx/romstage.c
@@ -48,7 +48,7 @@ int spd_read_byte(unsigned int device, unsigned int address)
return smbus_read_byte(device, address);
}
-#if !CONFIG_BOARD_OLD_REVISION
+#if !IS_ENABLED(CONFIG_BOARD_OLD_REVISION)
/* Send config data to System Management Controller via SMB. */
static int smc_send_config(unsigned char config_data)
{
@@ -79,7 +79,7 @@ static const u16 sio_init_table[] = { // hi = data, lo = index
0x042C, // disable ATXPG; VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 enabled
0x1423, // don't delay PoWeROK1/2
0x9072, // watchdog triggers PWROK, counts seconds
-#if !CONFIG_USE_WATCHDOG_ON_BOOT
+#if !IS_ENABLED(CONFIG_USE_WATCHDOG_ON_BOOT)
0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0
#endif
0xBF25, 0x172A, 0xF326, // select GPIO function for most pins
@@ -88,7 +88,7 @@ static const u16 sio_init_table[] = { // hi = data, lo = index
0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, WD_ACTIVE
0x06C8, // config GP12,11 as output, GP10 as input
0x2DF5, // map Hw Monitor Thermal Output to GP55
-#if CONFIG_BOARD_OLD_REVISION
+#if IS_ENABLED(CONFIG_BOARD_OLD_REVISION)
0x1F2A, 0xC072, // switch GP13 to GPIO, WDT output from PWROK to KRST
#endif
};
@@ -132,7 +132,7 @@ void asmlinkage mainboard_romstage_entry(unsigned long bist)
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
-#if !CONFIG_BOARD_OLD_REVISION
+#if !IS_ENABLED(CONFIG_BOARD_OLD_REVISION)
int err;
/* bit0 = Spread Spectrum */
if ((err = smc_send_config(SMC_CONFIG))) {
diff --git a/src/mainboard/lippert/literunner-lx/mainboard.c b/src/mainboard/lippert/literunner-lx/mainboard.c
index e4084b5cbc..11f9e1420a 100644
--- a/src/mainboard/lippert/literunner-lx/mainboard.c
+++ b/src/mainboard/lippert/literunner-lx/mainboard.c
@@ -25,7 +25,7 @@
#include <device/pci_ids.h>
/* Bit0 turns off the Live LED, bit1 switches Com1 to RS485, bit2 same for Com2. */
-#if CONFIG_ONBOARD_UARTS_RS485
+#if IS_ENABLED(CONFIG_ONBOARD_UARTS_RS485)
#define SIO_GP1X_CONFIG 0x07
#else
#define SIO_GP1X_CONFIG 0x01
diff --git a/src/mainboard/lippert/literunner-lx/romstage.c b/src/mainboard/lippert/literunner-lx/romstage.c
index e83924cb71..1474ecd7db 100644
--- a/src/mainboard/lippert/literunner-lx/romstage.c
+++ b/src/mainboard/lippert/literunner-lx/romstage.c
@@ -38,7 +38,7 @@
#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO)
/* Bit0 enables Spread Spectrum, bit1 makes on-board CF slot act as IDE slave. */
-#if CONFIG_ONBOARD_IDE_SLAVE
+#if IS_ENABLED(CONFIG_ONBOARD_IDE_SLAVE)
#define SMC_CONFIG 0x03
#else
#define SMC_CONFIG 0x01
@@ -79,7 +79,7 @@ int spd_read_byte(unsigned int device, unsigned int address)
if (device != DIMM0)
return 0xFF; /* No DIMM1, don't even try. */
-#if CONFIG_DEBUG_SMBUS
+#if IS_ENABLED(CONFIG_DEBUG_SMBUS)
if (address >= sizeof(spdbytes) || spdbytes[address] == 0xFF)
printk(BIOS_ERR, "ERROR: spd_read_byte(DIMM0, 0x%02x) "
"returns 0xff\n", address);
@@ -118,7 +118,7 @@ static const u16 sio_init_table[] = { // hi = data, lo = index
0x072C, // VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 internal
0x1423, // don't delay PoWeROK1/2
0x9072, // watchdog triggers PWROK, counts seconds
-#if !CONFIG_USE_WATCHDOG_ON_BOOT
+#if !IS_ENABLED(CONFIG_USE_WATCHDOG_ON_BOOT)
0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0
#endif
0xBF25, 0x172A, 0xF326, // select GPIO function for most pins
diff --git a/src/mainboard/lippert/roadrunner-lx/mainboard.c b/src/mainboard/lippert/roadrunner-lx/mainboard.c
index 1d35ebe464..b922e7872b 100644
--- a/src/mainboard/lippert/roadrunner-lx/mainboard.c
+++ b/src/mainboard/lippert/roadrunner-lx/mainboard.c
@@ -25,7 +25,7 @@
#include <device/pci_ids.h>
/* Bit1 switches Com1 to RS485, bit2 same for Com2, bit5 turns off the Live LED. */
-#if CONFIG_ONBOARD_UARTS_RS485
+#if IS_ENABLED(CONFIG_ONBOARD_UARTS_RS485)
#define SIO_GP1X_CONFIG 0x26
#else
#define SIO_GP1X_CONFIG 0x20
diff --git a/src/mainboard/lippert/roadrunner-lx/romstage.c b/src/mainboard/lippert/roadrunner-lx/romstage.c
index 6ba90d7773..8341178f82 100644
--- a/src/mainboard/lippert/roadrunner-lx/romstage.c
+++ b/src/mainboard/lippert/roadrunner-lx/romstage.c
@@ -55,7 +55,7 @@ static const u16 sio_init_table[] = { // hi = data, lo = index
0x1E2C, // disable ATXPG; VIN6,FAN4/5,VIN3 enabled, VIN7 internal
0x1423, // don't delay PoWeROK1/2 - triggers 2nd reset
0x9072, // watchdog triggers PWROK, counts seconds
-#if !CONFIG_USE_WATCHDOG_ON_BOOT
+#if !IS_ENABLED(CONFIG_USE_WATCHDOG_ON_BOOT)
0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0
#endif
0xBF25, 0x372A, 0xF326, // select GPIO function for most pins
diff --git a/src/mainboard/lippert/spacerunner-lx/mainboard.c b/src/mainboard/lippert/spacerunner-lx/mainboard.c
index b0bc74e9f6..594545d146 100644
--- a/src/mainboard/lippert/spacerunner-lx/mainboard.c
+++ b/src/mainboard/lippert/spacerunner-lx/mainboard.c
@@ -25,7 +25,7 @@
#include <device/pci_ids.h>
/* Bit0 turns off the Live LED, bit1 switches Com1 to RS485, bit2 same for Com2. */
-#if CONFIG_ONBOARD_UARTS_RS485
+#if IS_ENABLED(CONFIG_ONBOARD_UARTS_RS485)
#define SIO_GP1X_CONFIG 0x07
#else
#define SIO_GP1X_CONFIG 0x01
diff --git a/src/mainboard/lippert/spacerunner-lx/romstage.c b/src/mainboard/lippert/spacerunner-lx/romstage.c
index c77d82f813..a73276edb0 100644
--- a/src/mainboard/lippert/spacerunner-lx/romstage.c
+++ b/src/mainboard/lippert/spacerunner-lx/romstage.c
@@ -38,7 +38,7 @@
#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO)
/* Bit0 enables Spread Spectrum, bit1 makes on-board SSD act as IDE slave. */
-#if CONFIG_ONBOARD_IDE_SLAVE
+#if IS_ENABLED(CONFIG_ONBOARD_IDE_SLAVE)
#define SMC_CONFIG 0x03
#else
#define SMC_CONFIG 0x01
@@ -79,7 +79,7 @@ int spd_read_byte(unsigned int device, unsigned int address)
if (device != DIMM0)
return 0xFF; /* No DIMM1, don't even try. */
-#if CONFIG_DEBUG_SMBUS
+#if IS_ENABLED(CONFIG_DEBUG_SMBUS)
if (address >= sizeof(spdbytes) || spdbytes[address] == 0xFF) {
printk(BIOS_ERR, "ERROR: spd_read_byte(DIMM0, 0x%02x) "
"returns 0xff\n", address);
@@ -119,7 +119,7 @@ static const u16 sio_init_table[] = { // hi = data, lo = index
0x072C, // VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 internal
0x1423, // don't delay PoWeROK1/2
0x9072, // watchdog triggers PWROK, counts seconds
-#if !CONFIG_USE_WATCHDOG_ON_BOOT
+#if !IS_ENABLED(CONFIG_USE_WATCHDOG_ON_BOOT)
0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0
#endif
0xBF25, 0x172A, 0xF326, // select GPIO function for most pins