diff options
Diffstat (limited to 'src/mainboard/msi/ms7707/devicetree.cb')
| -rw-r--r-- | src/mainboard/msi/ms7707/devicetree.cb | 117 |
1 files changed, 117 insertions, 0 deletions
diff --git a/src/mainboard/msi/ms7707/devicetree.cb b/src/mainboard/msi/ms7707/devicetree.cb new file mode 100644 index 0000000000..4db2536148 --- /dev/null +++ b/src/mainboard/msi/ms7707/devicetree.cb @@ -0,0 +1,117 @@ +chip northbridge/intel/sandybridge + register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }" + register "gfx.link_frequency_270_mhz" = "0" + register "gfx.ndid" = "3" + device cpu_cluster 0x0 on + chip cpu/intel/model_206ax + register "c1_acpower" = "1" + register "c1_battery" = "1" + register "c2_acpower" = "3" + register "c2_battery" = "3" + register "c3_acpower" = "5" + register "c3_battery" = "5" + device lapic 0x0 on end + device lapic 0xacac off end + end + end + device domain 0x0 on + subsystemid 0x1462 0x7707 inherit + chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH + register "c2_latency" = "0x0065" + register "docking_supported" = "0" + register "gen1_dec" = "0x000c0291" + register "gen2_dec" = "0x000c0a01" + register "p_cnt_throttling_supported" = "1" + register "pcie_port_coalesce" = "1" + register "sata_interface_speed_support" = "0x3" + register "sata_port_map" = "0x33" + register "spi_lvscc" = "0x2005" + register "spi_uvscc" = "0x2005" + register "gpe0_en" = "0x28000040" + device pci 16.0 on end # Management Engine Interface 1 + device pci 16.1 off end # Management Engine Interface 2 + device pci 16.2 off end # Management Engine IDE-R + device pci 16.3 off end # Management Engine KT + device pci 19.0 on end # Intel Gigabit Ethernet + device pci 1a.0 on end # USB2 EHCI #2 + device pci 1b.0 on end # High Definition Audio Audio controller + device pci 1c.0 on end # PCIe Port #1 + device pci 1c.1 off end # PCIe Port #2 + device pci 1c.2 off end # PCIe Port #3 + device pci 1c.3 off end # PCIe Port #4 + device pci 1c.4 off end # PCIe Port #5 + device pci 1c.5 off end # PCIe Port #6 + device pci 1c.6 on end # PCIe Port #7 + device pci 1c.7 off end # PCIe Port #8 + device pci 1d.0 on end # USB2 EHCI #1 + device pci 1e.0 off end # PCI bridge + device pci 1f.0 on # LPC bridge PCI-LPC bridge + chip superio/fintek/f71808a + register "multi_function_register_0" = "0x00" # 0x28 + register "multi_function_register_1" = "0xc0" # 0x29 + register "multi_function_register_2" = "0x20" # 0x2a + register "multi_function_register_3" = "0x4f" # 0x2b + register "multi_function_register_4" = "0x90" # 0x2c + register "hwm_peci_tsi_ctrl" = "0x02" # 0x0a - PECI enabled, 1.23 V + register "hwm_tcc_temp" = "0x64" # 0x0c - TCC temperature = 100 °C + register "hwm_fan1_seg1_speed" = "0xff" # 0xaa - Fan 1 segment 1 + register "hwm_fan1_seg2_speed" = "0xe2" # 0xab - Fan 1 segment 2 + register "hwm_fan1_seg3_speed" = "0xaf" # 0xac - Fan 1 segment 3 + register "hwm_fan1_seg4_speed" = "0x89" # 0xad - Fan 1 segment 4 + register "hwm_fan1_seg5_speed" = "0x72" # 0xae - Fan 1 segment 5 + register "hwm_fan1_temp_src" = "0x10" # 0xaf - Fan 1 source = PECI + register "hwm_fan2_seg1_speed" = "0xff" # 0xba - Fan 2 segment 1 = 100% + register "hwm_fan2_seg2_speed" = "0xd9" # 0xbb - Fan 2 segment 2 = 86% + register "hwm_fan2_seg3_speed" = "0xb2" # 0xbc - Fan 2 segment 3 = 74% + register "hwm_fan2_seg4_speed" = "0x99" # 0xbd - Fan 2 segment 4 = 62% + register "hwm_fan2_seg5_speed" = "0x80" # 0xbe - Fan 2 segment 5 = 50% + register "hwm_fan2_temp_src" = "0x1e" # 0xbf - Fan 2 source = temperature 2 + + register "hwm_domain1_en" = "0x01" + register "hwm_fan1_boundary_hysteresis" = "0x43" + register "hwm_vt1_boundary_1_temperature" = "0x52" # 82°C + register "hwm_vt1_boundary_2_temperature" = "0x46" # 70°C + register "hwm_vt1_boundary_3_temperature" = "0x41" # 65°C + register "hwm_vt1_boundary_4_temperature" = "0x37" # 55°C + + device pnp 4e.1 off end # Serial Port + device pnp 4e.4 on # Hardware monitor + io 0x60 = 0x295 + irq 0x70 = 0 + # global + irq 0x27 = 0x10 # PWOK follows Intel sequence + irq 0x2d = 0x2e # Anykey+MouseButton wakeup + end + device pnp 4e.5 on # Keyboard + io 0x60 = 0x060 + irq 0x70 = 1 + irq 0x72 = 12 + end + device pnp 4e.6 on # GPIO + irq 0x70 = 0 + irq 0xd0 = 0x20 # GPIO2 Output Enable + irq 0xd1 = 0x20 # GPIO2 Output Data + irq 0xd3 = 0x20 # GPIO2 Drive Enable + end + device pnp 4e.7 off # WDT + io 0x60 = 0xa00 + end + device pnp 4e.8 off end # CIR + device pnp 4e.a on # PME, ACPI, Power Saving Registers + irq 0xe2 = 0x0c # EuP control + irq 0xed = 0xc0 # EuP Watchdog Control + irq 0xf4 = 0x10 # Keep Last State Select + irq 0xf9 = 0x09 # LED VSB Mode Select + end + end + end + device pci 1f.2 on end # SATA Controller 1 + device pci 1f.3 on end # SMBus + device pci 1f.5 off end # SATA Controller 2 + device pci 1f.6 off end # Thermal + end + device pci 00.0 on end # Host bridge + device pci 01.0 on end # PCIe Bridge for discrete graphics + device pci 02.0 off end # Internal graphics + end +end |