diff options
Diffstat (limited to 'src/mainboard/msi')
44 files changed, 0 insertions, 4612 deletions
diff --git a/src/mainboard/msi/ms7135/Kconfig b/src/mainboard/msi/ms7135/Kconfig deleted file mode 100644 index 3affb6a2a1..0000000000 --- a/src/mainboard/msi/ms7135/Kconfig +++ /dev/null @@ -1,55 +0,0 @@ -if BOARD_MSI_MS7135 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_754 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_CK804 - select HT_CHAIN_DISTRIBUTE - select SUPERIO_WINBOND_W83627THG - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select CK804_USE_NIC - select CK804_USE_ACI - select QRANK_DIMM_SUPPORT - select HAVE_ACPI_TABLES - -config MAINBOARD_DIR - string - default msi/ms7135 - -config APIC_ID_OFFSET - hex - default 0x0 - -config MAINBOARD_PART_NUMBER - string - default "MS-7135" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config IRQ_SLOT_COUNT - int - default 13 - -config CK804_PCI_E_X - int - default 0 - -endif # BOARD_MSI_MS7135 diff --git a/src/mainboard/msi/ms7135/Kconfig.name b/src/mainboard/msi/ms7135/Kconfig.name deleted file mode 100644 index d087e684f9..0000000000 --- a/src/mainboard/msi/ms7135/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_MSI_MS7135 - bool "MS-7135 (K8N Neo3)" diff --git a/src/mainboard/msi/ms7135/acpi_tables.c b/src/mainboard/msi/ms7135/acpi_tables.c deleted file mode 100644 index a637637a84..0000000000 --- a/src/mainboard/msi/ms7135/acpi_tables.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * ACPI support - * written by Stefan Reinauer <stepan@openbios.org> - * (C) 2005 Stefan Reinauer - * - * - * Copyright 2005 AMD - * 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB - */ - -#include <arch/acpi.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <assert.h> - -/* APIC */ -unsigned long acpi_fill_madt(unsigned long current) -{ - struct device *dev; - struct resource *res; - - /* create all subtables for processors */ - current = acpi_create_madt_lapics(current); - - /* Write NVIDIA CK804 IOAPIC. */ - dev = dev_find_slot(0x0, PCI_DEVFN(0x1,0)); - ASSERT(dev != NULL); - - res = find_resource(dev, PCI_BASE_ADDRESS_1); - ASSERT(res != NULL); - - current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, - CONFIG_MAX_CPUS * CONFIG_MAX_PHYSICAL_CPUS, res->base, 0); - - /* Initialize interrupt mapping if mptable.c didn't. */ -#if (!CONFIG_GENERATE_MP_TABLE) -#error untested config - pci_write_config32(dev, 0x7c, 0x0120d218); - pci_write_config32(dev, 0x80, 0x12008a00); - pci_write_config32(dev, 0x84, 0x0000007d); -#endif - - /* IRQ9 */ - current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) - current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW); - - /* create all subtables for processors */ - /* acpi_create_madt_lapic_nmis returns current, not size. */ - current = acpi_create_madt_lapic_nmis(current, - MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1); - - return current; -} diff --git a/src/mainboard/msi/ms7135/board_info.txt b/src/mainboard/msi/ms7135/board_info.txt deleted file mode 100644 index caae90a766..0000000000 --- a/src/mainboard/msi/ms7135/board_info.txt +++ /dev/null @@ -1,8 +0,0 @@ -Board name: MS-7135 (K8N Neo3) -Category: desktop -Board URL: http://no.msi.com/product/mb/K8N-Neo3.html -ROM package: PLCC -ROM protocol: LPC -ROM socketed: variable -Flashrom support: y -Release year: 2005 diff --git a/src/mainboard/msi/ms7135/cmos.layout b/src/mainboard/msi/ms7135/cmos.layout deleted file mode 100644 index 531b2d62cc..0000000000 --- a/src/mainboard/msi/ms7135/cmos.layout +++ /dev/null @@ -1,65 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 8 h 0 century -408 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -448 4 e 10 ram_voltage -452 4 e 11 nf4_voltage -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -10 0 2.55 -10 1 2.50 -10 2 2.60 -10 3 2.65 -10 4 2.70 - -11 0 1.50 -11 1 1.55 -11 2 1.60 - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/msi/ms7135/devicetree.cb b/src/mainboard/msi/ms7135/devicetree.cb deleted file mode 100644 index e3f0c8c98a..0000000000 --- a/src/mainboard/msi/ms7135/devicetree.cb +++ /dev/null @@ -1,75 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_754 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - - device domain 0 on # PCI domain - subsystemid 0x1462 0x7135 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/ck804 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627thg # Super I/O - device pnp 4e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - drq 0x74 = 3 - end - device pnp 4e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.3 on # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 4e.7 off end # Game port, MIDI, GPIO 1 & 5 - device pnp 4e.8 off end # GPIO 2 - device pnp 4e.9 off end # GPIO 3, GPIO 4 - device pnp 4e.a off end # ACPI - device pnp 4e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on end # SMbus - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # Onboard audio (ACI) - device pci 4.1 off end # Onboard modem (MCI), N/A - device pci 6.0 on end # IDE - device pci 7.0 on end # SATA 1 - device pci 8.0 on end # SATA 0 - device pci 9.0 on end # PCI - device pci a.0 on end # NIC - device pci b.0 off end # PCI E 3 (N/A) - device pci c.0 off end # PCI E 2 (N/A) - device pci d.0 on end # PCI E 1 - device pci e.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/msi/ms7135/dsdt.asl b/src/mainboard/msi/ms7135/dsdt.asl deleted file mode 100644 index e906270b68..0000000000 --- a/src/mainboard/msi/ms7135/dsdt.asl +++ /dev/null @@ -1,279 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2004 Nick Barker <Nick.Barker9@btinternet.com> - * Copyright (C) 2007, 2008 Rudolf Marek <r.marek@assembler.cz> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ISA portions taken from QEMU acpi-dsdt.dsl. - */ - -DefinitionBlock ("DSDT.aml", "DSDT", 1, "CORE ", "CB-DSDT ", 1) -{ - #include "northbridge/amd/amdk8/util.asl" - - /* For now only define 2 power states: - * - S0 which is fully on - * - S5 which is soft off - * Any others would involve declaring the wake up methods. - */ - Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 }) - Name (\_S5, Package () { 0x07, 0x00, 0x00, 0x00 }) - - Name (PICM, 0x00) - Method (_PIC, 1, Serialized) { - Store (Arg0, PICM) - } - - /* Root of the bus hierarchy */ - Scope (\_SB) - { - /* Top PCI device (CK804) */ - Device (PCI0) - { - Name (_HID, EisaId ("PNP0A03")) - Name (_ADR, 0x00) - Name (_UID, 0x00) - Name (_BBN, 0x00) - - External (BUSN) - External (MMIO) - External (PCIO) - External (SBLK) - External (TOM1) - External (HCLK) - External (SBDN) - External (HCDN) - - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () - { - IO (Decode16, - 0x0CF8, // Address Range Minimum - 0x0CF8, // Address Range Maximum - 0x01, // Address Alignment - 0x08, // Address Length - ) - WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0CF8, // Address Length - ,, , TypeStatic) - }) - /* Methods bellow use SSDT to get actual MMIO regs - The IO ports are from 0xd00, optionally an VGA, - otherwise the info from MMIO is used. - \_SB.GXXX(node, link) - */ - Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1) - Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2) - Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3) - Return (Local3) - } - -#include "southbridge/nvidia/ck804/acpi/ck804.asl" - - /* PCI Routing Table */ - Name (_PRT, Package () { - Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI0.LLAS, 0x00 }, - Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI0.LLAS, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x00, \_SB.PCI0.LUOH, 0x00 }, - Package (0x04) { 0x0002FFFF, 0x01, \_SB.PCI0.LUEH, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI0.LAUD, 0x00 }, - Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI0.LMOD, 0x00 }, - Package (0x04) { 0x0006FFFF, 0x00, \_SB.PCI0.LPA0, 0x00 }, - Package (0x04) { 0x0007FFFF, 0x00, \_SB.PCI0.LSA0, 0x00 }, - Package (0x04) { 0x0008FFFF, 0x00, \_SB.PCI0.LSA1, 0x00 }, - - Package (0x04) { 0x000AFFFF, 0x00, \_SB.PCI0.LEMA, 0x00 }, - - Package (0x04) { 0x000BFFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x000BFFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x000BFFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x000BFFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - - Package (0x04) { 0x000CFFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x000CFFFF, 0x01, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x000CFFFF, 0x02, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x000CFFFF, 0x03, \_SB.PCI0.LNKD, 0x00 }, - - Package (0x04) { 0x000DFFFF, 0x00, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x000DFFFF, 0x01, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x000DFFFF, 0x02, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x000DFFFF, 0x03, \_SB.PCI0.LNKC, 0x00 }, - - Package (0x04) { 0x000EFFFF, 0x00, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x000EFFFF, 0x01, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x000EFFFF, 0x02, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x000EFFFF, 0x03, \_SB.PCI0.LNKB, 0x00 }, - }) - - Device (PCIC) - { - Name (_ADR, 0x00090000) - Name (_UID, 0x00) - Name (_PRT, Package () { - /* AGR slot "AGP1" */ - Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI0.LNKA, 0x00 }, - - /* PCI slot "PCI1" */ - Package (0x04) { 0x0007FFFF, 0x00, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0007FFFF, 0x01, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0007FFFF, 0x02, \_SB.PCI0.LNKD, 0x00 }, - /* Not sure INTD is right, but this is what the OEM BIOS does. */ - Package (0x04) { 0x0007FFFF, 0x03, \_SB.PCI0.LNKE, 0x00 }, - - /* PCI slot "PCI2" */ - Package (0x04) { 0x0008FFFF, 0x00, \_SB.PCI0.LNKC, 0x00 }, - Package (0x04) { 0x0008FFFF, 0x01, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0008FFFF, 0x02, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0008FFFF, 0x03, \_SB.PCI0.LNKB, 0x00 }, - - /* PCI slot "PCI3" */ - Package (0x04) { 0x0009FFFF, 0x00, \_SB.PCI0.LNKD, 0x00 }, - Package (0x04) { 0x0009FFFF, 0x01, \_SB.PCI0.LNKA, 0x00 }, - Package (0x04) { 0x0009FFFF, 0x02, \_SB.PCI0.LNKB, 0x00 }, - Package (0x04) { 0x0009FFFF, 0x03, \_SB.PCI0.LNKC, 0x00 }, - }) - } - - /* 2:00 PCIe x1 */ - Device (PEX1) - { - Name (_ADR, 0x000d0000) - Name (_UID, 0x00) - } - - /* 3:00 PCIe x16 */ - Device (PEX0) - { - Name (_ADR, 0x000e0000) - Name (_UID, 0x00) - } - - Device (LPC) { - Name (_HID, EisaId ("PNP0A05")) - Name (_ADR, 0x00010000) - - OperationRegion (CF44, PCI_Config, 0x44, 0x04) - Field (CF44, ByteAcc, NoLock, Preserve) - { - ETBA, 32, - } - - /* PS/2 keyboard (seems to be important for WinXP install) */ - Device (KBD) - { - Name (_HID, EisaId ("PNP0303")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IO (Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO (Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags () {1} - }) - Return (TMP) - } - } - - /* PS/2 mouse */ - Device (MOU) - { - Name (_HID, EisaId ("PNP0F13")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - IRQNoFlags () {12} - }) - Return (TMP) - } - } - - /* Parallel port */ - Device (LP0) - { - Name (_HID, EisaId ("PNP0400")) // "PNP0401" for ECP - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (TMP, ResourceTemplate () { - FixedIO (0x0378, 0x10) - IRQNoFlags () {7} - }) - Return (TMP) - } - } - - /* Floppy controller */ - Device (FDC0) - { - Name (_HID, EisaId ("PNP0700")) - Method (_STA, 0, NotSerialized) - { - Return (0x0f) - } - Method (_CRS, 0, NotSerialized) - { - Name (BUF0, ResourceTemplate () { - FixedIO (0x03F0, 0x08) - IRQNoFlags () {6} - DMA (Compatibility, NotBusMaster, Transfer8) {2} - }) - Return (BUF0) - } - } -#if 0 - Device (HPET) - { - Name (_HID, EisaId ("PNP0103")) - Name (CRS, ResourceTemplate () - { - Memory32Fixed (ReadOnly, - 0x00000000, - 0x00001000, - _Y02) - }) - Method (_STA, 0, NotSerialized) - { - Return (0x0F) - } - Method (_CRS, 0, NotSerialized) - { - CreateDWordField (CRS, \_SB.PCI0.LPC.HPET._Y02._BAS, HPT) - Store (ETBA, HPT) - Return (CRS) - } - - } -#endif - } - } - } -} diff --git a/src/mainboard/msi/ms7135/get_bus_conf.c b/src/mainboard/msi/ms7135/get_bus_conf.c deleted file mode 100644 index 19b520fda0..0000000000 --- a/src/mainboard/msi/ms7135/get_bus_conf.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> - * (Thanks to LSRA University of Mannheim for their support) - * Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -/* Global variables for MB layouts and these will be shared by irqtable, - * mptable and acpi_tables. - */ -/* busnum is default */ -unsigned char bus_ck804[6]; -unsigned apicid_ck804; - -unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, //no HTIO for ms7135 -}; -unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, //ms7135 has only one ht-chain -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - unsigned apicid_base; - - struct device *dev; - unsigned sbdn; - int i; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - sbdn = sysconf.sbdn; - - for (i = 0; i < 6; i++) { - bus_ck804[i] = 0; - } - - bus_ck804[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - /* CK804 */ - int dn = -1; - for (i = 1; i < 4; i++) { - switch (i) { - case 1: dn = 9; break; - case 2: dn = 13; break; - case 3: dn = 14; break; - default: dn = -1; break; - } - dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + dn, 0)); - if (dev) { - bus_ck804[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(3); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_ck804 = apicid_base + 0; -} diff --git a/src/mainboard/msi/ms7135/irq_tables.c b/src/mainboard/msi/ms7135/irq_tables.c deleted file mode 100644 index e40794ef3c..0000000000 --- a/src/mainboard/msi/ms7135/irq_tables.c +++ /dev/null @@ -1,256 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> - * (Thanks to LSRA University of Mannheim for their support) - * Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* Documentation at: http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM */ - -/* This is probably not right, feel free to fix this if you don't want - * to use the mptable. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_ck804[6]; - -/** - * Add one line to IRQ table. - */ -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -/** - * Create the IRQ routing table. - * Values are derived from getpir generated code. - */ -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - - uint8_t sum = 0; - int i; - unsigned sbdn; - - /* get_bus_conf() will find out all bus num and apic that share with - * mptable.c and mptable.c - */ - get_bus_conf(); - sbdn = sysconf.sbdn; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = bus_ck804[0]; - pirq->rtr_devfn = ((sbdn + 9) << 3) | 0; - - pirq->exclusive_irqs = 0x828; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x005c; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - -//Slot1 PCIE 16x - write_pirq_info(pirq_info, bus_ck804[1], (0 << 3) | 0, 0x3, 0xdeb8, 0x4, - 0xdeb8, 0x1, 0xdeb8, 0x2, 0xdeb8, 4, 0); - pirq_info++; - slot_num++; - -//Slot2 PCIE 1x - write_pirq_info(pirq_info, bus_ck804[2], (0 << 3) | 0, 0x4, 0xdeb8, 0x1, - 0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 5, 0); - pirq_info++; - slot_num++; - -//Slot3 PCIE 1x - write_pirq_info(pirq_info, bus_ck804[3], (0 << 3) | 0, 0x1, 0xdeb8, 0x2, - 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 6, 0); - pirq_info++; - slot_num++; - -//Slot4 PCIE 4x - write_pirq_info(pirq_info, bus_ck804[4], (0x4 << 3) | 0, - 0x2, 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0x1, 0xdeb8, - 7, 0); - pirq_info++; - slot_num++; - -//Slot5 - 7 PCI - for (i = 0; i < 3; i++) { - write_pirq_info(pirq_info, bus_ck804[5], (0 << (6 + i)) | 0, - ((i + 0) % 4) + 1, 0xdeb8, - ((i + 1) % 4) + 1, 0xdeb8, - ((i + 2) % 4) + 1, 0xdeb8, - ((i + 3) % 4) + 1, 0xdeb8, i, 0); - pirq_info++; - slot_num++; - } - -//pci bridge - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 9) << 3) | 0, 0x1, - 0xdeb8, 0x2, 0xdeb8, 0x3, 0xdeb8, 0x4, 0xdeb8, 0, 0); - pirq_info++; - slot_num++; - -//smbus - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 1) << 3) | 0, 0x2, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - -//usb - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 2) << 3) | 0, 0x1, - 0xdeb8, 0x2, 0xdeb8, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - -//audio - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 4) << 3) | 0, 0x1, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; -//sata - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 7) << 3) | 0, 0x1, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; -//sata - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 8) << 3) | 0, 0x1, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; -//nic - write_pirq_info(pirq_info, bus_ck804[0], ((sbdn + 0xa) << 3) | 0, 0x1, - 0xdeb8, 0, 0, 0, 0, 0, 0, 0, 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - -#if 0 - unsigned char irq[4]; - irq[0] = 0; - irq[1] = 0; - irq[2] = 0; - irq[3] = 0; - - /* Bus, device, slots IRQs for {A,B,C,D}. */ - - irq[0] = 10; /* SMBus *//* test me */ - pci_assign_irqs(bus_ck804[0], 1, irq); - - irq[0] = 10; /* USB */ - irq[1] = 10; - pci_assign_irqs(bus_ck804[0], 2, irq); - - irq[0] = 10; /* AC97 */ - irq[1] = 0; - pci_assign_irqs(bus_ck804[0], 4, irq); - - irq[0] = 11; /* SATA */ - pci_assign_irqs(bus_ck804[0], 7, irq); - - irq[0] = 5; /* SATA */ - pci_assign_irqs(bus_ck804[0], 8, irq); - - irq[0] = 10; /* Ethernet */ - pci_assign_irqs(bus_ck804[0], 10, irq); - - /* physical slots */ - - irq[0] = 5; /* PCI E1 - x1 */ - pci_assign_irqs(bus_ck804[2], 0, irq); - - irq[0] = 11; /* PCI E2 - x16 */ - pci_assign_irqs(bus_ck804[3], 0, irq); - - /* AGP-on-PCI "AGR" ignored */ - - irq[0] = 10; /* PCI1 */ - irq[1] = 11; - irq[2] = 5; - irq[3] = 0; - pci_assign_irqs(bus_ck804[1], 7, irq); - - irq[0] = 11; /* PCI2 */ - irq[1] = 10; - irq[2] = 5; - irq[3] = 0; - pci_assign_irqs(bus_ck804[1], 8, irq); - - irq[0] = 5; /* PCI3 */ - irq[1] = 10; - irq[2] = 11; - irq[3] = 0; - pci_assign_irqs(bus_ck804[1], 9, irq); -#endif - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/msi/ms7135/mptable.c b/src/mainboard/msi/ms7135/mptable.c deleted file mode 100644 index 35dc02c482..0000000000 --- a/src/mainboard/msi/ms7135/mptable.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> - * (Thanks to LSRA University of Mannheim for their support) - * Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_ck804[6]; -extern unsigned apicid_ck804; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - int bus_isa; - unsigned sbdn; - - get_bus_conf(); - sbdn = sysconf.sbdn; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - mptable_write_buses(mc, NULL, &bus_isa); - -/* I/O APICs: APIC ID Version State Address*/ - { - struct device *dev; - struct resource *res; - u32 dword; - - dev = dev_find_slot(bus_ck804[0], PCI_DEVFN(sbdn + 0x1, 0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, apicid_ck804, 0x11, - res2mmio(res, 0, 0)); - } - - /* Initialize interrupt mapping */ - - /* copied from stock bios */ - /*0x01800500,0x1800d509,0x00520d08*/ - - dword = 0x08d0d218; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x8d001509; - pci_write_config32(dev, 0x80, dword); - - dword = 0x00010271; - pci_write_config32(dev, 0x84, dword); - - } - } - - /* Now, assemble the table. */ - mptable_add_isa_interrupts(mc, bus_isa, apicid_ck804, 0); - -#define PCI_INT(bus, dev, fn, pin) \ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, \ - bus_ck804[bus], (((dev)<<2)|(fn)), apicid_ck804, (pin)) - -#if 0 - // Onboard ck804 smbus - PCI_INT(0, sbdn+1, 1, 10); /* (this seems odd, how to test?) */ - -#endif - // Onboard ck804 USB - PCI_INT(0, sbdn+2, 0, 23); - PCI_INT(0, sbdn+2, 1, 23); - - // Onboard ck804 AC-97 - PCI_INT(0, sbdn+4, 0, 23); - - // Onboard ck804 SATA 0 - PCI_INT(0, sbdn+7, 0, 20); - - // Onboard ck804 SATA 1 - PCI_INT(0, sbdn+8, 0, 21); - - // Onboard ck804 NIC - PCI_INT(0, sbdn+10, 0, 22); - - - /* "AGR" slot */ - PCI_INT(1, 0, 0, 16); - PCI_INT(1, 0, 1, 17); - - /* legacy PCI */ - PCI_INT(1, 7, 0, 17); - PCI_INT(1, 7, 1, 18); - PCI_INT(1, 7, 2, 19); - PCI_INT(1, 7, 3, 16); - - PCI_INT(1, 8, 0, 18); - PCI_INT(1, 8, 1, 19); - PCI_INT(1, 8, 2, 16); - PCI_INT(1, 8, 3, 17); - - PCI_INT(1, 9, 0, 19); - PCI_INT(1, 9, 1, 16); - PCI_INT(1, 9, 2, 17); - PCI_INT(1, 9, 3, 18); - - - /* PCI-E x1 port */ - PCI_INT(2, 0, 0, 19); - /* XXX guesses */ - PCI_INT(2, 0, 1, 16); - PCI_INT(2, 0, 2, 17); - PCI_INT(2, 0, 3, 18); - - /* PCI-E x16 port */ /* XXX fix me ? */ - PCI_INT(3, 0, 0, 18); - /* XXX guesses */ - PCI_INT(3, 0, 1, 19); - PCI_INT(3, 0, 2, 16); - PCI_INT(3, 0, 3, 17); - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_ck804[0]); - - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/msi/ms7135/romstage.c b/src/mainboard/msi/ms7135/romstage.c deleted file mode 100644 index 39afe47749..0000000000 --- a/src/mainboard/msi/ms7135/romstage.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * (Written by Yinghai Lu <yinghailu@amd.com> for AMD) - * Copyright (C) 2007 Philipp Degler <pdegler@rumms.uni-mannheim.de> - * (Thanks to LSRA University of Mannheim for their support) - * Copyright (C) 2008 Jonathan A. Kollasch <jakllsch@kollasch.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <cpu/x86/lapic.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627thg/w83627thg.h> -#include <cpu/amd/model_fxx_rev.h> -#include <console/console.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include <southbridge/nvidia/ck804/early_smbus.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> - -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <spd.h> -#include <northbridge/amd/amdk8/pre_f.h> - -#if IS_ENABLED(CONFIG_HAVE_OPTION_TABLE) -#include "option_table.h" -#endif - -#define SERIAL_DEV PNP_DEV(0x4e, W83627THG_SP1) - -void memreset(int controllers, const struct mem_controller *ctrl) { } -void activate_spd_rom(const struct mem_controller *ctrl) { } - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "northbridge/amd/amdk8/raminit.c" -#include "lib/generic_sdram.c" -#include <southbridge/nvidia/ck804/early_setup_ss.h> -#include "southbridge/nvidia/ck804/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void ms7135_set_ram_voltage(void) -{ - u8 b; - b = read_option(ram_voltage, 0); - if (b > 4) /* default if above 2.70v */ - b = 0; - printk(BIOS_INFO, "setting RAM voltage %08x\n", b); - ck804_smbus_write_byte(1, 0x2f, 0x00, b); -} - -static void ms7135_set_nf4_voltage(void) -{ - u8 b; - b = read_option(nf4_voltage, 0); - if (b > 2) /* default if above 1.60v */ - b = 0; - b |= 0x10; - printk(BIOS_INFO, "setting NF4 voltage %08x\n", b); - ck804_smbus_write_byte(1, 0x2f, 0x02, b); -} - -static void sio_setup(void) -{ - u32 dword; - u8 byte; - - /* Subject decoding */ - byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0x7b, byte); - - /* LPC Positive Decode 0 */ - dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0); - /* Serial 0, Serial 1 */ - dword |= (1 << 0) | (1 << 1); - pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE + 1, 0), 0xa0, dword); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const u16 spd_addr[] = { - DIMM0, DIMM1, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - 0, 0, 0, 0, - }; - - int needs_reset; - unsigned bsp_apicid = 0, nodes; - struct mem_controller ctrl[8]; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx); - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - needs_reset = setup_coherent_ht_domain(); - - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - needs_reset |= ht_setup_chains_x(); - needs_reset |= ck804_early_setup_x(); - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - allow_all_aps_stop(bsp_apicid); - - nodes = get_nodes(); - //It's the time to set ctrl now; - fill_mem_ctrl(nodes, ctrl, spd_addr); - - enable_smbus(); - - ms7135_set_nf4_voltage(); - ms7135_set_ram_voltage(); - -#if IS_ENABLED(CONFIG_DEBUG_SMBUS) - dump_spd_registers(&ctrl[0]); - dump_smbus_registers(); -#endif - - sdram_initialize(nodes, ctrl); -} diff --git a/src/mainboard/msi/ms7260/Kconfig b/src/mainboard/msi/ms7260/Kconfig deleted file mode 100644 index dcc74717a0..0000000000 --- a/src/mainboard/msi/ms7260/Kconfig +++ /dev/null @@ -1,71 +0,0 @@ -if BOARD_MSI_MS7260 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_AM2 - select DIMM_DDR2 - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_MCP55 - select HT_CHAIN_DISTRIBUTE - select MCP55_USE_NIC - select MCP55_USE_AZA - select SUPERIO_WINBOND_W83627EHG - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_512 - select QRANK_DIMM_SUPPORT - select K8_ALLOCATE_IO_RANGE - select SET_FIDVID - -config MAINBOARD_DIR - string - default msi/ms7260 - -config DCACHE_RAM_BASE - hex - default 0xc8000 - -config DCACHE_RAM_SIZE - hex - default 0x08000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MEM_TRAIN_SEQ - int - default 2 - -config MAINBOARD_PART_NUMBER - string - default "MS-7260" - -config MAX_CPUS - int - default 2 - -config MAX_PHYSICAL_CPUS - int - default 1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config IRQ_SLOT_COUNT - int - default 11 - -config MCP55_PCI_E_X_0 - int - default 0 - -endif # BOARD_MSI_MS7260 diff --git a/src/mainboard/msi/ms7260/Kconfig.name b/src/mainboard/msi/ms7260/Kconfig.name deleted file mode 100644 index f5be5e9cf3..0000000000 --- a/src/mainboard/msi/ms7260/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_MSI_MS7260 - bool "MS-7260 (K9N Neo)" diff --git a/src/mainboard/msi/ms7260/board_info.txt b/src/mainboard/msi/ms7260/board_info.txt deleted file mode 100644 index 40ae7a4784..0000000000 --- a/src/mainboard/msi/ms7260/board_info.txt +++ /dev/null @@ -1,7 +0,0 @@ -Board name: MS-7260 (K9N Neo) -Category: desktop -Board URL: http://no.msi.com/product/mb/K9N-Neo--PCB-1-0-.html -ROM package: PLCC -ROM socketed: y -Flashrom support: coreboot-only -Release year: 2007 diff --git a/src/mainboard/msi/ms7260/cmos.layout b/src/mainboard/msi/ms7260/cmos.layout deleted file mode 100644 index 78dc3e23a9..0000000000 --- a/src/mainboard/msi/ms7260/cmos.layout +++ /dev/null @@ -1,70 +0,0 @@ -## -## This file is part of the coreboot project. -## -## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de> -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## - -# TODO: Check and fix up the values as needed. - -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 200Mhz -8 1 166Mhz -8 2 133Mhz -8 3 100Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/msi/ms7260/devicetree.cb b/src/mainboard/msi/ms7260/devicetree.cb deleted file mode 100644 index 717ad009cf..0000000000 --- a/src/mainboard/msi/ms7260/devicetree.cb +++ /dev/null @@ -1,143 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_AM2 # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x1462 0x7260 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627ehg # Super I/O - device pnp 4e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 4e.1 on # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 4e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 4e.3 on # Com2 / IrDA - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 4e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 # PS/2 keyboard IRQ - irq 0x72 = 12 # PS/2 mouse IRQ - end - device pnp 4e.106 off # Serial flash interface (SFI) - # io 0x62 = 0x100 - end - device pnp 4e.007 off # GPIO 1 - end - device pnp 4e.107 off # Game port - # io 0x60 = 0x220 # Datasheet: 0x201 - end - device pnp 4e.207 off # MIDI - # io 0x62 = 0x300 # Datasheet: 0x330 - # irq 0x70 = 9 - end - device pnp 4e.307 off # GPIO 6 - end - device pnp 4e.8 off # WDTO#, PLED - end - device pnp 4e.009 off # GPIO 2 - end - device pnp 4e.109 off # GPIO 3 - end - device pnp 4e.209 off # GPIO 4 - end - device pnp 4e.309 off # GPIO 5 - end - device pnp 4e.a off # ACPI - end - device pnp 4e.b on # Hardware monitor - io 0x60 = 0xa10 - # TODO: IRQ? - end - end - end - device pci 1.1 on # SM 0 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - end - # TODO: Check if the stuff below is correct / needed. - device pci 1.1 on # SM 1 - # PCI device SMBus address will - # depend on addon PCI device, do - # we need to scan_smbus_bus? - # chip drivers/generic/generic # PCIXA slot 1 - # device i2c 50 on end - # end - # chip drivers/generic/generic # PCIXB slot 1 - # device i2c 51 on end - # end - # chip drivers/generic/generic # PCIXB slot 2 - # device i2c 52 on end - # end - # chip drivers/generic/generic # PCI slot 1 - # device i2c 53 on end - # end - # chip drivers/generic/generic # Master MCP55 PCI-E - # device i2c 54 on end - # end - # chip drivers/generic/generic # Slave MCP55 PCI-E - # device i2c 55 on end - # end - chip drivers/generic/generic # MAC EEPROM - device i2c 51 on end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 off end # SATA 2 (N/A on this board) - device pci 6.0 on end # PCI - device pci 6.1 on end # AZA (HD Audio) - device pci 8.0 on end # NIC - device pci 9.0 off end # NIC (N/A on this board) - device pci a.0 off end # PCI E 5 (N/A on this board?) - device pci b.0 on end # PCI E 4 - device pci c.0 on end # PCI E 3 - device pci d.0 on end # PCI E 2 - device pci e.0 on end # PCI E 1 - device pci f.0 on end # PCI E 0 - register "ide0_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - # TODO: Check the two lines below. - # 1: SMBus under 2e.8, 2: SM0 3: SM1 - register "mac_eeprom_smbus" = "3" - register "mac_eeprom_addr" = "0x51" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/msi/ms7260/get_bus_conf.c b/src/mainboard/msi/ms7260/get_bus_conf.c deleted file mode 100644 index d768041e70..0000000000 --- a/src/mainboard/msi/ms7260/get_bus_conf.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> -#include <cpu/amd/amdk8_sysconf.h> -#include <stdlib.h> - -/* Global variables for MB layouts (shared by irqtable/mptable/acpi_table). */ -// busnum is default. -unsigned char bus_mcp55[8]; // 1 -unsigned apicid_mcp55; - -unsigned pci1234x[] = { - /* Here you only need to set value in pci1234 for HT-IO that could - * be installed or not. You may need to preset pci1234 for HTIO board, - * please refer to * src/northbridge/amd/amdk8/get_sblk_pci1234.c. - */ - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -unsigned hcdnx[] = { - /* HT Chain device num, actually it is unit id base of every ht - * device in chain, assume every chain only have 4 ht device at most. - */ - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - unsigned int apicid_base, sbdn; - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; /* Do it only once. */ - - get_bus_conf_done = 1; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); /* First byte of first chain */ - sbdn = sysconf.sbdn; - - for (i = 0; i < 8; i++) - bus_mcp55[i] = 0; - - bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - /* MCP55 */ - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); - if (dev) { - bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_mcp55[2]++; - } else { - printk - (BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sbdn + 0x06); - - bus_mcp55[1] = 2; - bus_mcp55[2] = 3; - } - - for (i = 2; i < 8; i++) { - dev = dev_find_slot(bus_mcp55[0], - PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); - if (dev) { - bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - -/* I/O APICs: APIC ID Version State Address */ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - apicid_mcp55 = apicid_base + 0; -} diff --git a/src/mainboard/msi/ms7260/hda_verb.c b/src/mainboard/msi/ms7260/hda_verb.c deleted file mode 100644 index 072a306131..0000000000 --- a/src/mainboard/msi/ms7260/hda_verb.c +++ /dev/null @@ -1,7 +0,0 @@ -#include <device/azalia_device.h> - -const u32 cim_verb_data[0] = {}; - -const u32 pc_beep_verbs[0] = {}; - -AZALIA_ARRAY_SIZES; diff --git a/src/mainboard/msi/ms7260/irq_tables.c b/src/mainboard/msi/ms7260/irq_tables.c deleted file mode 100644 index 359c1d4648..0000000000 --- a/src/mainboard/msi/ms7260/irq_tables.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdk8_sysconf.h> - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -extern unsigned char bus_mcp55[8]; // 1 - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned int slot_num, sbdn; - uint8_t *v; - uint8_t sum = 0; - int i; - - /* Will find out all bus num and apic that share with mptable.c - * and mptable.c and acpi_tables.c. - */ - get_bus_conf(); - sbdn = sysconf.sbdn; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 and 0x100000. */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *)(addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - pirq->rtr_bus = bus_mcp55[0]; - pirq->rtr_devfn = ((sbdn + 6) << 3) | 0; - pirq->exclusive_irqs = 0; - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; /* TODO: Hm, getpir suggests 0x0364 !? */ - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; - - /* PCI bridge (00:06.0) */ - write_pirq_info(pirq_info, bus_mcp55[0], ((sbdn + 6) << 3) | 0, 0x1, - 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) - pirq->checksum = sum; - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; -} diff --git a/src/mainboard/msi/ms7260/mptable.c b/src/mainboard/msi/ms7260/mptable.c deleted file mode 100644 index 6450d2da68..0000000000 --- a/src/mainboard/msi/ms7260/mptable.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> - -extern unsigned char bus_mcp55[8]; // 1 -extern unsigned apicid_mcp55; - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - unsigned int sbdn; - int i, j, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - - mptable_write_buses(mc, NULL, &bus_isa); - - /* I/O APICs: APIC ID Version State Address */ - { - struct device *dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x1, 0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) - smp_write_ioapic(mc, apicid_mcp55, 0x11, - res2mmio(res, 0, 0)); - - dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd0001202; - pci_write_config32(dev, 0x84, dword); - } - } - - mptable_add_isa_interrupts(mc, bus_isa, apicid_mcp55, 0); - - /* I/O Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 1) << 2) | 1, apicid_mcp55, 0xa); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 2) << 2) | 0, apicid_mcp55, 0x16); // 22 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 2) << 2) | 1, apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 6) << 2) | 1, apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 5) << 2) | 0, apicid_mcp55, 0x14); // 20 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 5) << 2) | 1, apicid_mcp55, 0x17); // 23 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 5) << 2) | 2, apicid_mcp55, 0x15); // 21 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[0], ((sbdn + 8) << 2) | 0, apicid_mcp55, 0x16); // 22 - - for (j = 7; j >= 2; j--) { - if (!bus_mcp55[j]) - continue; - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[j], (0x00 << 2) | i, apicid_mcp55, 0x10 + (2 + j + i + 4 - sbdn % 4) % 4); - } - - for (j = 0; j < 2; j++) { - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW, bus_mcp55[1], ((0x06 + j) << 2) | i, apicid_mcp55, 0x10 + (2 + i + j) % 4); - } - - /* Local Ints: Type Trigger Polarity Bus ID IRQ APIC ID PIN# */ - mptable_lintsrc(mc, bus_isa); - - /* There is no extension information... */ - - /* Compute the checksums. */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/msi/ms7260/resourcemap.c b/src/mainboard/msi/ms7260/resourcemap.c deleted file mode 100644 index f17fadf1a0..0000000000 --- a/src/mainboard/msi/ms7260/resourcemap.c +++ /dev/null @@ -1,279 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* TODO: This is copied from the GIGABYTE GA-M57SLI-S4 target. */ - -static void setup_mb_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ -// PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000003, /* link 0 of CPU 0 --> Nvidia MCP55 */ - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - - }; - - int max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/msi/ms7260/romstage.c b/src/mainboard/msi/ms7260/romstage.c deleted file mode 100644 index 1da8ba9355..0000000000 --- a/src/mainboard/msi/ms7260/romstage.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2007 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <southbridge/nvidia/mcp55/mcp55.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <lib.h> -#include <spd.h> -#include <cpu/x86/lapic.h> -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627ehg/w83627ehg.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> - -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x4e, W83627EHG_SP1) - -unsigned get_sbdn(unsigned bus); - -unsigned get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - /* Find the device. */ - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_MCP55_HT), bus); - - return (dev >> 15) & 0x1f; -} - -void memreset(int controllers, const struct mem_controller *ctrl) {} -void activate_spd_rom(const struct mem_controller *ctrl) {} - -int spd_read_byte(unsigned int device, unsigned int address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/f.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" - -#define MCP55_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */ - -#include <southbridge/nvidia/mcp55/early_setup_ss.h> -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0); - dword |= (1 << 0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa0, dword); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4); - dword |= (1 << 16); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE + 1, 0), 0xa4, dword); -} - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // Node 0 - DIMM0, DIMM2, 0, 0, - DIMM1, DIMM3, 0, 0, - // Node 1 - DIMM4, DIMM6, 0, 0, - DIMM5, DIMM7, 0, 0, - }; - - struct sys_info *sysinfo = &sysinfo_car; - int needs_reset = 0; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0. */ - /* Allow the HT devices to be found. */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - /* FIXME: This should be part of the Super I/O code/config. */ - pnp_enter_conf_state(SERIAL_DEV); - /* Switch CLKSEL to 24MHz (default is 48MHz). Needed for serial! */ - pnp_write_config(SERIAL_DEV, 0x24, 0); - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - pnp_exit_conf_state(SERIAL_DEV); - - setup_mb_resource_map(); - console_init(); - report_bist_failure(bist); /* Halt upon BIST failure. */ - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - /* In BSP so could hold all AP until sysinfo is in RAM. */ - set_sysinfo_in_ram(0); - - setup_coherent_ht_domain(); /* Routing table and start other core0. */ - wait_all_core0_started(); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - /* It is said that we should start core1 after all core0 launched - * becase optimize_link_coherent_ht is moved out from - * setup_coherent_ht_domain, so here need to make sure last core0 is - * started, esp for two way system (there may be APIC ID conflicts in - * that case). - */ - start_other_cores(); - wait_all_other_cores_started(bsp_apicid); -#endif - - /* Set up chains and store link pair for optimization later. */ - ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */ - -#if IS_ENABLED(CONFIG_SET_FIDVID) - { - msr_t msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - { - msr_t msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } -#endif - - init_timer(); /* Need to use TMICT to synchronize FID/VID. */ - - needs_reset |= optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); - - /* fidvid change will issue one LDTSTOP and the HT change will be effective too. */ - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - allow_all_aps_stop(bsp_apicid); - - /* It's the time to set ctrl in sysinfo now. */ - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - /* All AP stopped? */ - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - -} diff --git a/src/mainboard/msi/ms9185/Kconfig b/src/mainboard/msi/ms9185/Kconfig deleted file mode 100644 index 355fdcfa35..0000000000 --- a/src/mainboard/msi/ms9185/Kconfig +++ /dev/null @@ -1,62 +0,0 @@ -if BOARD_MSI_MS9185 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_BROADCOM_BCM5780 - select SOUTHBRIDGE_BROADCOM_BCM5785 - select HT_CHAIN_DISTRIBUTE - select SUPERIO_NSC_PC87417 - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select LIFT_BSP_APIC_ID - select BOARD_ROMSIZE_KB_512 - select SB_HT_CHAIN_UNITID_OFFSET_ONLY - select QRANK_DIMM_SUPPORT - select SET_FIDVID - -config MAINBOARD_DIR - string - default msi/ms9185 - -config DCACHE_RAM_BASE - hex - default 0xcc000 - -config DCACHE_RAM_SIZE - hex - default 0x04000 - -config APIC_ID_OFFSET - hex - default 0x8 - -config MAINBOARD_PART_NUMBER - string - default "MS-9185" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x1 - -config HT_CHAIN_UNITID_BASE - hex - default 0x6 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_MSI_MS9185 diff --git a/src/mainboard/msi/ms9185/Kconfig.name b/src/mainboard/msi/ms9185/Kconfig.name deleted file mode 100644 index 00594c059d..0000000000 --- a/src/mainboard/msi/ms9185/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_MSI_MS9185 - bool "MS-9185 (K9SD Master-S2R)" diff --git a/src/mainboard/msi/ms9185/board_info.txt b/src/mainboard/msi/ms9185/board_info.txt deleted file mode 100644 index e5081f9922..0000000000 --- a/src/mainboard/msi/ms9185/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Board name: K9SD Master-S2R (MS-9185) -Category: server -Board URL: http://www.msiserver.de/de/Produkte/Server_Mainboards/K9SD_Master_S2R_MS_9185.aspx -Release year: 2006 diff --git a/src/mainboard/msi/ms9185/cmos.layout b/src/mainboard/msi/ms9185/cmos.layout deleted file mode 100644 index e42037e1a1..0000000000 --- a/src/mainboard/msi/ms9185/cmos.layout +++ /dev/null @@ -1,52 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 400Mhz -8 1 333Mhz -8 2 266Mhz -8 3 200Mhz -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/msi/ms9185/devicetree.cb b/src/mainboard/msi/ms9185/devicetree.cb deleted file mode 100644 index 3c9168d2ee..0000000000 --- a/src/mainboard/msi/ms9185/devicetree.cb +++ /dev/null @@ -1,85 +0,0 @@ -chip northbridge/amd/amdk8/root_complex - device cpu_cluster 0 on - chip cpu/amd/socket_F - device lapic 0 on end - end - end - device domain 0 on - subsystemid 0x1022 0x2b80 inherit - chip northbridge/amd/amdk8 - device pci 18.0 on end - device pci 18.0 on end - device pci 18.0 on # northbridge - # devices on link 0 - chip southbridge/broadcom/bcm5780 # HT2000 - device pci 0.0 on end # PXB 1 0x0130 - device pci 1.0 on # PXB 2 0x0130 - device pci 4.0 on end # GB E 0x1668 vid = 0x14e4 - device pci 4.1 on end # GB E 0x1669 vid = 0x14e4 - end - device pci 2.0 on end # PCI E 1 #0x0132 - device pci 3.0 on end # PCI E 2 - device pci 4.0 on end # PCI E 3 - device pci 5.0 on end # PCI E 4 - end - chip southbridge/broadcom/bcm5785 # HT1000 - device pci 0.0 on # HT PXB 0x0036 - device pci d.0 on end # PPBX 0x0104 - device pci e.0 on end # SATA 0x024a - device pci e.1 on end # SATA 0x024a bx_a001 - device pci e.2 on end # SATA 0x024a bx_a001 - device pci e.3 on end # SATA 0x024a bx_a001 - end - device pci 1.0 on # Legacy pci main 0x0205 - end - device pci 1.1 on end # IDE 0x0214 - device pci 1.2 on # LPC 0x0234 - chip superio/nsc/pc87417 - device pnp 2e.0 off # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel Port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 off # Com 2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.3 on # Com 1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.4 off end # SWC - device pnp 2e.5 off end # Mouse - device pnp 2e.6 on # Keyboard - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - end - device pnp 2e.7 off end # GPIO - device pnp 2e.f off end # XBUS - device pnp 2e.10 on #RTC - io 0x60 = 0x70 - io 0x62 = 0x72 - end - end - end - device pci 1.3 on end # WDTimer 0x0238 - device pci 1.4 on end # XIOAPIC0 0x0235 - device pci 1.5 on end # XIOAPIC1 - device pci 1.6 on end # XIOAPIC2 - device pci 2.0 on end # USB 0x0223 - device pci 2.1 on end # USB - device pci 2.2 on end # USB - device pci 3.0 on end # it is in bcm5785_0 bus - end - end # device pci 18.0 - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end # amdk8 - end #domain -end diff --git a/src/mainboard/msi/ms9185/get_bus_conf.c b/src/mainboard/msi/ms9185/get_bus_conf.c deleted file mode 100644 index d02f30687a..0000000000 --- a/src/mainboard/msi/ms9185/get_bus_conf.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -#include <stdlib.h> -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -static unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -static unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - - struct device *dev; - int i; - struct mb_sysconf_t *m; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; - m->sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780 - - m->bus_bcm5785_0 = (sysconf.pci1234[0] >> 16) & 0xff; - m->bus_bcm5780[0] = m->bus_bcm5785_0; - - /* bcm5785 */ - dev = dev_find_slot(m->bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn, 0)); - if (dev) { - m->bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - dev = dev_find_slot(m->bus_bcm5785_1, PCI_DEVFN(0xd, 0)); - if (dev) { - m->bus_bcm5785_1_1 = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_bcm5785_0, sysconf.sbdn); - } - - /* bcm5780 */ - for (i = 1; i < 7; i++) { - dev = - dev_find_slot(m->bus_bcm5780[0], - PCI_DEVFN(m->sbdn2 + i - 1, 0)); - if (dev) { - m->bus_bcm5780[i] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_bcm5780[0], m->sbdn2 + i - 1); - } - } - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(3); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - for (i = 0; i < 3; i++) - m->apicid_bcm5785[i] = apicid_base + i; -} diff --git a/src/mainboard/msi/ms9185/irq_tables.c b/src/mainboard/msi/ms9185/irq_tables.c deleted file mode 100644 index 65f82a2823..0000000000 --- a/src/mainboard/msi/ms9185/irq_tables.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> -#include <cpu/amd/amdk8_sysconf.h> - -#include "mb_sysconf.h" - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - - uint8_t sum = 0; - int i; - - struct mb_sysconf_t *m; - - get_bus_conf(); - - m = sysconf.mb; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = m->bus_bcm5785_0; - pirq->rtr_devfn = (sysconf.sbdn << 3) | 0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x1166; - pirq->rtr_device = 0x0036; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, m->bus_bcm5785_0, (sysconf.sbdn << 3) | 0, - 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, - 0); - pirq_info++; - slot_num++; - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/msi/ms9185/mb_sysconf.h b/src/mainboard/msi/ms9185/mb_sysconf.h deleted file mode 100644 index 6944c2465c..0000000000 --- a/src/mainboard/msi/ms9185/mb_sysconf.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef MB_SYSCONF_H -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_bcm5780[7]; - unsigned char bus_bcm5785_0; - unsigned char bus_bcm5785_1; - unsigned char bus_bcm5785_1_1; - unsigned apicid_bcm5785[3]; - - unsigned sbdn2; -}; - -#endif diff --git a/src/mainboard/msi/ms9185/mptable.c b/src/mainboard/msi/ms9185/mptable.c deleted file mode 100644 index ea7c905af0..0000000000 --- a/src/mainboard/msi/ms9185/mptable.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2001 Eric W.Biederman <ebiderman@lnxi.com> - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <arch/io.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) -#include <cpu/amd/multicore.h> -#endif -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - - int i, bus_isa; - struct mb_sysconf_t *m; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - struct device *dev = NULL; - struct resource *res; - for (i = 0; i < 3; i++) { - dev = dev_find_device(0x1166, 0x0235, dev); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_0); - if (res) { - smp_write_ioapic(mc, m->apicid_bcm5785[i], 0x11, - res2mmio(res, 0, 0)); - } - } - } - - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_bcm5785[0], 0); - -//IDE - outb(0x02, 0xc00); outb(0x0e, 0xc01); - - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, - m->bus_bcm5785_0, ((1+sysconf.sbdn)<<2)|1, m->apicid_bcm5785[0], 0xe); // IDE - -//SATA - outb(0x07, 0xc00); outb(0x0f, 0xc01); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5785_1, (0x0e << 2)|0, m->apicid_bcm5785[0], 0xf); - -//USB - outb(0x01, 0xc00); outb(0x0a, 0xc01); - for (i = 0; i < 3; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5785_0, ((2+sysconf.sbdn)<<2)|i, m->apicid_bcm5785[0], 0xa); // - - - - /* enable int */ - /* why here? must get the BAR and PCI command bit 1 set before enable it ....*/ - { - struct device *dev; - dev = dev_find_device(0x1166, 0x0205, 0); - if (dev) { - uint32_t dword; - dword = pci_read_config32(dev, 0x6c); - dword |= (1 << 4); // enable interrupts - pci_write_config32(dev, 0x6c, dword); - } - } - -//First pci-x slot (on bcm5785) under bus_bcm5785_1:d.0 - // AIC 8130 Galileo Technology... - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5785_1_1, (6 << 2)|i, m->apicid_bcm5785[1], 2 + (1+i)%4); // - - -//pci slot (on bcm5785) - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5785_0, (5 << 2)|i, m->apicid_bcm5785[1], 8+i%4); // - - -//onboard ati - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5785_0, (4 << 2)|0, m->apicid_bcm5785[1], 0x1); - -//PCI-X on bcm5780 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5780[1], (4 << 2)|i, m->apicid_bcm5785[1], 2 + (0+i)%4); // - -//onboard Broadcom - for (i = 0; i < 2; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5780[2], (4 << 2)|i, m->apicid_bcm5785[1], 0xa + (0+i)%4); // - - -// First PCI-E x8 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5780[5], (0 << 2)|i, m->apicid_bcm5785[1], 0xe); // - - -// Second PCI-E x8 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5780[3], (0 << 2)|i, m->apicid_bcm5785[1], 0xc); // - -// Third PCI-E x1 - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, - m->bus_bcm5780[4], (0 << 2)|i, m->apicid_bcm5785[1], 0xd); // - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/msi/ms9185/resourcemap.c b/src/mainboard/msi/ms9185/resourcemap.c deleted file mode 100644 index 533f31a49a..0000000000 --- a/src/mainboard/msi/ms9185/resourcemap.c +++ /dev/null @@ -1,286 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2003 Stefan Reinauer <stepan@coresystems.de> - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * ms9185 needs a different resource map - * - */ - -static void setup_ms9185_resource_map(void) -{ - static const unsigned int register_values[] = { - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, - - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration regin i - */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000203, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/msi/ms9185/romstage.c b/src/mainboard/msi/ms9185/romstage.c deleted file mode 100644 index d8cff07ff3..0000000000 --- a/src/mainboard/msi/ms9185/romstage.c +++ /dev/null @@ -1,176 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 Tyan - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for Tyan and AMD. - * - * Copyright (C) 2006 MSI - * Written by bxshi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <device/pci_ids.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include "southbridge/broadcom/bcm5785/early_smbus.c" -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <reset.h> -#include <cpu/x86/lapic.h> - -#include <superio/nsc/pc87417/pc87417.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" - -#define SERIAL_DEV PNP_DEV(0x2e, PC87417_SP1) -#define RTC_DEV PNP_DEV(0x2e, PC87417_RTC) - -unsigned get_sbdn(unsigned bus); - -void memreset(int controllers, const struct mem_controller *ctrl) { } - -void activate_spd_rom(const struct mem_controller *ctrl) -{ -#define SMBUS_SWITCH1 0x70 -#define SMBUS_SWITCH2 0x72 - unsigned device = (ctrl->channel0[0]) >> 8; - smbus_send_byte(SMBUS_SWITCH1, device & 0x0f); - smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f ); -} - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include "southbridge/broadcom/bcm5785/early_setup.c" -#include <northbridge/amd/amdk8/f.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <spd.h> -#include "cpu/amd/model_fxx/init_cpus.c" -#include "cpu/amd/model_fxx/fidvid.c" -#include "northbridge/amd/amdk8/early_ht.c" - -#define RC0 (0x10 << 8) -#define RC1 (0x01 << 8) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - //first node - RC0|DIMM0, RC0|DIMM2, RC0|DIMM4, RC0|DIMM6, - RC0|DIMM1, RC0|DIMM3, RC0|DIMM5, RC0|DIMM7, - //second node - RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6, - RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7, - }; - - struct sys_info *sysinfo = &sysinfo_car; - - int needs_reset; - unsigned bsp_apicid = 0; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - bcm5785_enable_lpc(); - //enable RTC - pc87417_enable_dev(RTC_DEV); - } - - if (bist == 0) - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - - pc87417_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); - - setup_ms9185_resource_map(); - - printk(BIOS_DEBUG, "bsp_apicid=%02x\n", bsp_apicid); - - setup_coherent_ht_domain(); - - wait_all_core0_started(); -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - /* becase optimize_link_coherent_ht is moved out from setup_coherent_ht_domain, - * So here need to make sure last core0 is started, esp for two way system, - * (there may be apic id conflicts in that case) - */ - start_other_cores(); -//bx_a010- wait_all_other_cores_started(bsp_apicid); -#endif - - /* it will set up chains and store link pair for optimization later */ - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - - bcm5785_early_setup(); - -#if IS_ENABLED(CONFIG_SET_FIDVID) - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "begin msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } - enable_fid_change(); - enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); - init_fidvid_bsp(bsp_apicid); - // show final fid and vid - { - msr_t msr; - msr = rdmsr(0xc0010042); - printk(BIOS_DEBUG, "end msr fid, vid %08x%08x\n", msr.hi, msr.lo); - } -#endif - -#if 1 - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - - // fidvid change will issue one LDTSTOP and the HT change will be effective too - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } -#endif - allow_all_aps_stop(bsp_apicid); - - //It's the time to set ctrl in sysinfo now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - //do we need apci timer, tsc...., only debug need it for better output - /* all ap stopped? */ -// init_timer(); // Need to use TMICT to synchronize FID/VID - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); - -} diff --git a/src/mainboard/msi/ms9282/Kconfig b/src/mainboard/msi/ms9282/Kconfig deleted file mode 100644 index 9314492074..0000000000 --- a/src/mainboard/msi/ms9282/Kconfig +++ /dev/null @@ -1,60 +0,0 @@ -if BOARD_MSI_MS9282 - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select CPU_AMD_SOCKET_F - select DIMM_DDR2 - select DIMM_REGISTERED - select NORTHBRIDGE_AMD_AMDK8 - select SOUTHBRIDGE_NVIDIA_MCP55 - select SUPERIO_WINBOND_W83627EHG - select PARALLEL_CPU_INIT - select HAVE_OPTION_TABLE - select HAVE_PIRQ_TABLE - select HAVE_MP_TABLE - select BOARD_ROMSIZE_KB_512 - select QRANK_DIMM_SUPPORT - select DRIVERS_I2C_ADM1027 - select DRIVERS_I2C_I2CMUX2 - -config MAINBOARD_DIR - string - default msi/ms9282 - -config DCACHE_RAM_BASE - hex - default 0xcc000 - -config DCACHE_RAM_SIZE - hex - default 0x04000 - -config APIC_ID_OFFSET - hex - default 0x10 - -config MAINBOARD_PART_NUMBER - string - default "MS-9282" - -config MAX_CPUS - int - default 4 - -config MAX_PHYSICAL_CPUS - int - default 2 - -config HT_CHAIN_UNITID_BASE - hex - default 0x0 - -config HT_CHAIN_END_UNITID_BASE - hex - default 0x20 - -config IRQ_SLOT_COUNT - int - default 11 - -endif # BOARD_MSI_MS9282 diff --git a/src/mainboard/msi/ms9282/Kconfig.name b/src/mainboard/msi/ms9282/Kconfig.name deleted file mode 100644 index 260c7de96e..0000000000 --- a/src/mainboard/msi/ms9282/Kconfig.name +++ /dev/null @@ -1,2 +0,0 @@ -config BOARD_MSI_MS9282 - bool "MS-9282 (K9SD Master)" diff --git a/src/mainboard/msi/ms9282/board_info.txt b/src/mainboard/msi/ms9282/board_info.txt deleted file mode 100644 index 01c035f93a..0000000000 --- a/src/mainboard/msi/ms9282/board_info.txt +++ /dev/null @@ -1,4 +0,0 @@ -Board name: K9SD Master (MS-9282) -Category: server -Board URL: http://cweb.msi.com.tw/program/products/server/svr/pro_svr_detail.php?UID=632 -Release year: 2006 diff --git a/src/mainboard/msi/ms9282/cmos.layout b/src/mainboard/msi/ms9282/cmos.layout deleted file mode 100644 index c4c90f697f..0000000000 --- a/src/mainboard/msi/ms9282/cmos.layout +++ /dev/null @@ -1,52 +0,0 @@ -entries - -0 384 r 0 reserved_memory -384 1 e 4 boot_option -388 4 h 0 reboot_counter -#392 3 r 0 unused -395 1 e 1 hw_scrubber -396 1 e 1 interleave_chip_selects -397 2 e 8 max_mem_clock -399 1 e 2 multi_core -400 1 e 1 power_on_after_fail -412 4 e 6 debug_level -440 4 e 9 slow_cpu -444 1 e 1 nmi -445 1 e 1 iommu -456 1 e 1 ECC_memory -728 256 h 0 user_data -984 16 h 0 check_sum -# Reserve the extended AMD configuration registers -1000 24 r 0 amd_reserved - - - -enumerations - -#ID value text -1 0 Disable -1 1 Enable -2 0 Enable -2 1 Disable -4 0 Fallback -4 1 Normal -6 5 Notice -6 6 Info -6 7 Debug -6 8 Spew -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 -9 0 off -9 1 87.5% -9 2 75.0% -9 3 62.5% -9 4 50.0% -9 5 37.5% -9 6 25.0% -9 7 12.5% - -checksums - -checksum 392 983 984 diff --git a/src/mainboard/msi/ms9282/devicetree.cb b/src/mainboard/msi/ms9282/devicetree.cb deleted file mode 100644 index 747347e504..0000000000 --- a/src/mainboard/msi/ms9282/devicetree.cb +++ /dev/null @@ -1,182 +0,0 @@ -chip northbridge/amd/amdk8/root_complex # Root complex - device cpu_cluster 0 on # (L)APIC cluster - chip cpu/amd/socket_F # CPU socket - device lapic 0 on end # Local APIC of the CPU - end - end - device domain 0 on # PCI domain - subsystemid 0x1462 0x9282 inherit - chip northbridge/amd/amdk8 # Northbridge / RAM controller - device pci 18.0 on # Link 0 == LDT 0 - chip southbridge/nvidia/mcp55 # Southbridge - device pci 0.0 on end # HT - device pci 1.0 on # LPC - chip superio/winbond/w83627ehg # Super I/O - device pnp 2e.0 on # Floppy - io 0x60 = 0x3f0 - irq 0x70 = 6 - drq 0x74 = 2 - end - device pnp 2e.1 off # Parallel port - io 0x60 = 0x378 - irq 0x70 = 7 - end - device pnp 2e.2 on # Com1 - io 0x60 = 0x3f8 - irq 0x70 = 4 - end - device pnp 2e.3 off # Com2 - io 0x60 = 0x2f8 - irq 0x70 = 3 - end - device pnp 2e.5 on # PS/2 keyboard & mouse - io 0x60 = 0x60 - io 0x62 = 0x64 - irq 0x70 = 1 - irq 0x72 = 12 - end - device pnp 2e.106 off # Serial flash interface (SFI) - io 0x60 = 0x100 - end - device pnp 2e.007 off # GPIO 1 - end - device pnp 2e.107 off # Game port - io 0x60 = 0x220 - end - device pnp 2e.207 off # MIDI - io 0x62 = 0x300 - irq 0x70 = 9 - end - device pnp 2e.307 off # GPIO 6 - end - device pnp 2e.8 off end # WDTO#, PLED - device pnp 2e.009 off # GPIO 2 - end - device pnp 2e.109 off # GPIO 3 - end - device pnp 2e.209 off # GPIO 4 - end - device pnp 2e.309 off # GPIO 5 - end - device pnp 2e.a off end # ACPI - device pnp 2e.b on # Hardware monitor - io 0x60 = 0x290 - irq 0x70 = 5 - end - end - end - device pci 1.1 on # SM 0 - chip drivers/i2c/i2cmux2 # PCA9554 SMBus mux - device i2c 70 on # 0 pca9554 1 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 57 on end - end - end - device i2c 70 on # 0 pca9554 2 - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 50 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 51 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 52 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 53 on end - end - chip drivers/generic/generic # DIMM 0-0-0 - device i2c 54 on end - end - chip drivers/generic/generic # DIMM 0-0-1 - device i2c 55 on end - end - chip drivers/generic/generic # DIMM 0-1-0 - device i2c 56 on end - end - chip drivers/generic/generic # DIMM 0-1-1 - device i2c 57 on end - end - end - end - end - device pci 1.1 on # SM 1 - chip drivers/i2c/i2cmux2 # pca9554 SMBus mux - device i2c 72 on # PCA9554 channel 1 - chip drivers/i2c/adm1027 # HWM ADT7476 1 - device i2c 2e on end - end - end - device i2c 72 on # PCA9545 channel 2 - chip drivers/i2c/adm1027 # HWM ADT7463 - device i2c 2e on end - end - end - device i2c 72 on end # PCA9545 channel 3 - device i2c 72 on # PCA9545 channel 4 - chip drivers/i2c/adm1027 # HWM ADT7476 2 - device i2c 2e on end - end - end - end - end - device pci 2.0 on end # USB 1.1 - device pci 2.1 on end # USB 2 - device pci 4.0 on end # IDE - device pci 5.0 on end # SATA 0 - device pci 5.1 on end # SATA 1 - device pci 5.2 on end # SATA 2 - device pci 6.0 on # P2P - device pci 4.0 on end - end - device pci 7.0 on end # reserve - device pci 8.0 on end # MAC0 - device pci 9.0 on end # MAC1 - device pci a.0 on - device pci 0.0 on - device pci 4.0 on end # PCI-E LAN1 - device pci 4.1 on end # PCI-E LAN2 - end - end # 0x376 - device pci b.0 on end # PCI E 0x374 - device pci c.0 on end - device pci d.0 on # SAS - device pci 0.0 on end - end # PCI E 1 0x378 - device pci e.0 on end # PCI E 0 0x375 - device pci f.0 on end # PCI E 0x377, PCI-E slot - register "ide0_enable" = "1" - register "ide1_enable" = "1" - register "sata0_enable" = "1" - register "sata1_enable" = "1" - end - end - device pci 18.0 on end # Link 1 - device pci 18.0 on end - device pci 18.1 on end - device pci 18.2 on end - device pci 18.3 on end - end - end -end diff --git a/src/mainboard/msi/ms9282/get_bus_conf.c b/src/mainboard/msi/ms9282/get_bus_conf.c deleted file mode 100644 index a072d6aa36..0000000000 --- a/src/mainboard/msi/ms9282/get_bus_conf.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/multicore.h> - -#include <cpu/amd/amdk8_sysconf.h> - -#include <stdlib.h> -#include "mb_sysconf.h" - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -struct mb_sysconf_t mb_sysconf; - -unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, - 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0, -// 0x0000ff0 -}; - -unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, - 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -// 0x20202020, -}; - -static unsigned get_bus_conf_done = 0; - -void get_bus_conf(void) -{ - - unsigned apicid_base; - struct mb_sysconf_t *m; - - struct device *dev; - int i; - - if (get_bus_conf_done == 1) - return; //do it only once - - get_bus_conf_done = 1; - - sysconf.mb = &mb_sysconf; - - m = sysconf.mb; - memset(m, 0, sizeof(struct mb_sysconf_t)); - - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for (i = 0; i < sysconf.hc_possible_num; i++) { - sysconf.pci1234[i] = pci1234x[i]; - sysconf.hcdn[i] = hcdnx[i]; - } - - get_sblk_pci1234(); - - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain - - m->bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; - - /* MCP55 */ - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06, 0)); - if (dev) { - m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI 1:%02x.0, using defaults\n", - sysconf.sbdn + 0x06); - } - - for (i = 2; i < 8; i++) { - dev = - dev_find_slot(m->bus_mcp55[0], - PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2, 0)); - if (dev) { - m->bus_mcp55[i] = - pci_read_config8(dev, PCI_SECONDARY_BUS); - } else { - printk(BIOS_DEBUG, - "ERROR - could not find PCI %02x:%02x.0, using defaults\n", - m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2); - } - } - -/*I/O APICs: APIC ID Version State Address*/ - if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) - apicid_base = get_apicid_base(1); - else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; - m->apicid_mcp55 = apicid_base + 0; - -} diff --git a/src/mainboard/msi/ms9282/irq_tables.c b/src/mainboard/msi/ms9282/irq_tables.c deleted file mode 100644 index cbb621a906..0000000000 --- a/src/mainboard/msi/ms9282/irq_tables.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <arch/pirq_routing.h> - -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, - uint8_t devfn, uint8_t link0, uint16_t bitmap0, - uint8_t link1, uint16_t bitmap1, uint8_t link2, - uint16_t bitmap2, uint8_t link3, uint16_t bitmap3, - uint8_t slot, uint8_t rfu) -{ - pirq_info->bus = bus; - pirq_info->devfn = devfn; - pirq_info->irq[0].link = link0; - pirq_info->irq[0].bitmap = bitmap0; - pirq_info->irq[1].link = link1; - pirq_info->irq[1].bitmap = bitmap1; - pirq_info->irq[2].link = link2; - pirq_info->irq[2].bitmap = bitmap2; - pirq_info->irq[3].link = link3; - pirq_info->irq[3].bitmap = bitmap3; - pirq_info->slot = slot; - pirq_info->rfu = rfu; -} - -unsigned long write_pirq_routing_table(unsigned long addr) -{ - - struct irq_routing_table *pirq; - struct irq_info *pirq_info; - unsigned slot_num; - uint8_t *v; - struct mb_sysconf_t *m; - unsigned sbdn; - - uint8_t sum = 0; - int i; - - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c - sbdn = sysconf.sbdn; - m = sysconf.mb; - - /* Align the table to be 16 byte aligned. */ - addr += 15; - addr &= ~15; - - /* This table must be between 0xf0000 & 0x100000 */ - printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr); - - pirq = (void *)(addr); - v = (uint8_t *) (addr); - - pirq->signature = PIRQ_SIGNATURE; - pirq->version = PIRQ_VERSION; - - pirq->rtr_bus = m->bus_mcp55[0]; - pirq->rtr_devfn = ((sbdn + 6) << 3) | 0; - - pirq->exclusive_irqs = 0; - - pirq->rtr_vendor = 0x10de; - pirq->rtr_device = 0x0370; - - pirq->miniport_data = 0; - - memset(pirq->rfu, 0, sizeof(pirq->rfu)); - - pirq_info = (void *)(&pirq->checksum + 1); - slot_num = 0; -//pci bridge - write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn + 6) << 3) | 0, 0x1, - 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - - for (i = 1; i < sysconf.hc_possible_num; i++) { - if (!(sysconf.pci1234[i] & 0x1)) - continue; - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; - - write_pirq_info(pirq_info, busn, (devn << 3) | 0, 0x1, 0xdef8, - 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; - slot_num++; - } - - pirq->size = 32 + 16 * slot_num; - - for (i = 0; i < pirq->size; i++) - sum += v[i]; - - sum = pirq->checksum - sum; - - if (sum != pirq->checksum) { - pirq->checksum = sum; - } - - printk(BIOS_INFO, "done.\n"); - - return (unsigned long)pirq_info; - -} diff --git a/src/mainboard/msi/ms9282/mb_sysconf.h b/src/mainboard/msi/ms9282/mb_sysconf.h deleted file mode 100644 index 3edba64696..0000000000 --- a/src/mainboard/msi/ms9282/mb_sysconf.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * Copyright (C) 2006 MSI - * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef MB_SYSCONF_H - -#define MB_SYSCONF_H - -struct mb_sysconf_t { - unsigned char bus_mcp55[8]; //1 - unsigned apicid_mcp55; -}; - -#endif diff --git a/src/mainboard/msi/ms9282/mptable.c b/src/mainboard/msi/ms9282/mptable.c deleted file mode 100644 index d3a4287b96..0000000000 --- a/src/mainboard/msi/ms9282/mptable.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <console/console.h> -#include <arch/smp/mpspec.h> -#include <device/pci.h> -#include <string.h> -#include <stdint.h> -#include <cpu/amd/amdk8_sysconf.h> -#include "mb_sysconf.h" - -static void *smp_write_config_table(void *v) -{ - struct mp_config_table *mc; - struct mb_sysconf_t *m; - unsigned sbdn; - - int i, j, bus_isa; - - mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); - - mptable_init(mc, LOCAL_APIC_ADDR); - - smp_write_processors(mc); - - get_bus_conf(); - sbdn = sysconf.sbdn; - m = sysconf.mb; - - mptable_write_buses(mc, NULL, &bus_isa); - -/*I/O APICs: APIC ID Version State Address*/ - { - struct device *dev; - struct resource *res; - uint32_t dword; - - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0)); - if (dev) { - res = find_resource(dev, PCI_BASE_ADDRESS_1); - if (res) { - smp_write_ioapic(mc, m->apicid_mcp55, 0x11, - res2mmio(res, 0, 0)); - } - - dword = 0x43c6c643; - pci_write_config32(dev, 0x7c, dword); - - dword = 0x81001a00; - pci_write_config32(dev, 0x80, dword); - - dword = 0xd00002d2; - pci_write_config32(dev, 0x84, dword); - - } - - - } - - mptable_add_isa_interrupts(mc, bus_isa, m->apicid_mcp55, 0); - -//SMBUS - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa); - -//USB1.1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22 - -//USB2.0 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23 - -//SATA1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20 - -//SATA2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23 - -//SATA3 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21 - -//NIC1 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22 -//NIC2 - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21 - - for (j = 7; j >= 2; j--) { - if (!m->bus_mcp55[j]) - continue; - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00 << 2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4); - } - - for (j = 0; j < 1; j++) - for (i = 0; i < 4; i++) - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4); - -/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/ - mptable_lintsrc(mc, bus_isa); - /* There is no extension information... */ - - /* Compute the checksums */ - return mptable_finalize(mc); -} - -unsigned long write_smp_table(unsigned long addr) -{ - void *v; - v = smp_write_floating_table(addr, 0); - return (unsigned long)smp_write_config_table(v); -} diff --git a/src/mainboard/msi/ms9282/resourcemap.c b/src/mainboard/msi/ms9282/resourcemap.c deleted file mode 100644 index 53b470a5e4..0000000000 --- a/src/mainboard/msi/ms9282/resourcemap.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2003 Stefan Reinauer <stepan@coresystems.de> - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@gmail.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/* - * MSI ms9282 needs a different resource map - * - */ - -static void setup_ms9282_resource_map(void) -{ - static const unsigned int register_values[] = { -#if 1 - /* Careful set limit registers before base registers which contain the enables */ - /* DRAM Limit i Registers - * F1:0x44 i = 0 - * F1:0x4C i = 1 - * F1:0x54 i = 2 - * F1:0x5C i = 3 - * F1:0x64 i = 4 - * F1:0x6C i = 5 - * F1:0x74 i = 6 - * F1:0x7C i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 3] Reserved - * [10: 8] Interleave select - * specifies the values of A[14:12] to use with interleave enable. - * [15:11] Reserved - * [31:16] DRAM Limit Address i Bits 39-24 - * This field defines the upper address bits of a 40 bit address - * that define the end of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, - PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, - PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, - PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, - PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, - PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, - PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, - /* DRAM Base i Registers - * F1:0x40 i = 0 - * F1:0x48 i = 1 - * F1:0x50 i = 2 - * F1:0x58 i = 3 - * F1:0x60 i = 4 - * F1:0x68 i = 5 - * F1:0x70 i = 6 - * F1:0x78 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 7: 2] Reserved - * [10: 8] Interleave Enable - * 000 = No interleave - * 001 = Interleave on A[12] (2 nodes) - * 010 = reserved - * 011 = Interleave on A[12] and A[14] (4 nodes) - * 100 = reserved - * 101 = reserved - * 110 = reserved - * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) - * [15:11] Reserved - * [13:16] DRAM Base Address i Bits 39-24 - * This field defines the upper address bits of a 40-bit address - * that define the start of the DRAM region. - */ - PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, -#endif -#if 1 - - /* Memory-Mapped I/O Limit i Registers - * F1:0x84 i = 0 - * F1:0x8C i = 1 - * F1:0x94 i = 2 - * F1:0x9C i = 3 - * F1:0xA4 i = 4 - * F1:0xAC i = 5 - * F1:0xB4 i = 6 - * F1:0xBC i = 7 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = Reserved - * [ 6: 6] Reserved - * [ 7: 7] Non-Posted - * 0 = CPU writes may be posted - * 1 = CPU writes must be non-posted - * [31: 8] Memory-Mapped I/O Limit Address i (39-16) - * This field defines the upp adddress bits of a 40-bit address that - * defines the end of a memory-mapped I/O region n - */ - PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00, - - /* Memory-Mapped I/O Base i Registers - * F1:0x80 i = 0 - * F1:0x88 i = 1 - * F1:0x90 i = 2 - * F1:0x98 i = 3 - * F1:0xA0 i = 4 - * F1:0xA8 i = 5 - * F1:0xB0 i = 6 - * F1:0xB8 i = 7 - * [ 0: 0] Read Enable - * 0 = Reads disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes disabled - * 1 = Writes Enabled - * [ 2: 2] Cpu Disable - * 0 = Cpu can use this I/O range - * 1 = Cpu requests do not use this I/O range - * [ 3: 3] Lock - * 0 = base/limit registers i are read/write - * 1 = base/limit registers i are read-only - * [ 7: 4] Reserved - * [31: 8] Memory-Mapped I/O Base Address i (39-16) - * This field defines the upper address bits of a 40bit address - * that defines the start of memory-mapped I/O region i - */ - PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000, -// PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003, -#endif -#if 1 - - /* PCI I/O Limit i Registers - * F1:0xC4 i = 0 - * F1:0xCC i = 1 - * F1:0xD4 i = 2 - * F1:0xDC i = 3 - * [ 2: 0] Destination Node ID - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 3: 3] Reserved - * [ 5: 4] Destination Link ID - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 = reserved - * [11: 6] Reserved - * [24:12] PCI I/O Limit Address i - * This field defines the end of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, - - /* PCI I/O Base i Registers - * F1:0xC0 i = 0 - * F1:0xC8 i = 1 - * F1:0xD0 i = 2 - * F1:0xD8 i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 3: 2] Reserved - * [ 4: 4] VGA Enable - * 0 = VGA matches Disabled - * 1 = matches all address < 64K and where A[9:0] is in the - * range 3B0-3BB or 3C0-3DF independen of the base & limit registers - * [ 5: 5] ISA Enable - * 0 = ISA matches Disabled - * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block - * from matching agains this base/limit pair - * [11: 6] Reserved - * [24:12] PCI I/O Base i - * This field defines the start of PCI I/O region n - * [31:25] Reserved - */ - PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000033, - PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000, -#endif - /* Config Base and Limit i Registers - * F1:0xE0 i = 0 - * F1:0xE4 i = 1 - * F1:0xE8 i = 2 - * F1:0xEC i = 3 - * [ 0: 0] Read Enable - * 0 = Reads Disabled - * 1 = Reads Enabled - * [ 1: 1] Write Enable - * 0 = Writes Disabled - * 1 = Writes Enabled - * [ 2: 2] Device Number Compare Enable - * 0 = The ranges are based on bus number - * 1 = The ranges are ranges of devices on bus 0 - * [ 3: 3] Reserved - * [ 6: 4] Destination Node - * 000 = Node 0 - * 001 = Node 1 - * 010 = Node 2 - * 011 = Node 3 - * 100 = Node 4 - * 101 = Node 5 - * 110 = Node 6 - * 111 = Node 7 - * [ 7: 7] Reserved - * [ 9: 8] Destination Link - * 00 = Link 0 - * 01 = Link 1 - * 10 = Link 2 - * 11 - Reserved - * [15:10] Reserved - * [23:16] Bus Number Base i - * This field defines the lowest bus number in configuration region i - * [31:24] Bus Number Limit i - * This field defines the highest bus number in configuration region i - */ -#if 1 -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, -// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, -#endif - - }; - - int max; - max = ARRAY_SIZE(register_values); - setup_resource_map(register_values, max); -} diff --git a/src/mainboard/msi/ms9282/romstage.c b/src/mainboard/msi/ms9282/romstage.c deleted file mode 100644 index 6bde880622..0000000000 --- a/src/mainboard/msi/ms9282/romstage.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * This file is part of the coreboot project. - * - * Copyright (C) 2006 AMD - * Written by Yinghai Lu <yinghailu@amd.com> for AMD. - * - * Copyright (C) 2006 MSI - * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <stdint.h> -#include <string.h> -#include <device/pci_def.h> -#include <arch/io.h> -#include <device/pnp_def.h> -#include <cpu/x86/lapic.h> -#include <pc80/mc146818rtc.h> -#include <console/console.h> -#include <cpu/amd/model_fxx_rev.h> -#include <southbridge/nvidia/mcp55/mcp55.h> -#include <northbridge/amd/amdk8/raminit.h> -#include <delay.h> -#include <cpu/x86/lapic.h> - -#include <superio/winbond/common/winbond.h> -#include <superio/winbond/w83627ehg/w83627ehg.h> -#include <cpu/amd/car.h> -#include <cpu/x86/bist.h> -#include <spd.h> -#include "northbridge/amd/amdk8/setup_resource_map.c" -#include <device/pci_ids.h> - -#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1) - -unsigned get_sbdn(unsigned bus); - -unsigned get_sbdn(unsigned bus) -{ - pci_devfn_t dev; - - /* Find the device. */ - dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_NVIDIA, - PCI_DEVICE_ID_NVIDIA_MCP55_HT), bus); - - return (dev >> 15) & 0x1f; -} - -void memreset(int controllers, const struct mem_controller *ctrl) { } - -void activate_spd_rom(const struct mem_controller *ctrl) -{ -#define SMBUS_SWITCH1 0x70 -#define SMBUS_SWITCH2 0x72 - unsigned device=(ctrl->channel0[0])>>8; - smbus_send_byte(SMBUS_SWITCH1, device); - smbus_send_byte(SMBUS_SWITCH2, (device >> 4) & 0x0f); -} - -int spd_read_byte(unsigned device, unsigned address) -{ - return smbus_read_byte(device, address); -} - -#include <northbridge/amd/amdk8/f.h> -#include "northbridge/amd/amdk8/incoherent_ht.c" -#include "lib/generic_sdram.c" -#include "resourcemap.c" -#include "cpu/amd/dualcore/dualcore.c" -#include <southbridge/nvidia/mcp55/early_setup_ss.h> - -//set GPIO to input mode -#define MCP55_MB_SETUP \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0 << 4)|(0 << 2)|(0 << 0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0 << 4)|(0 << 2)|(0 << 0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0 << 4)|(0 << 2)|(0 << 0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ - RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0 << 4)|(0 << 2)|(0 << 0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \ - -#include "southbridge/nvidia/mcp55/early_setup_car.c" -#include "cpu/amd/model_fxx/init_cpus.c" -#include "northbridge/amd/amdk8/early_ht.c" - -/* FIXME - * Dummy method to allow build - * Determine if this board / CPU should support - * FID/VID and implement proper support if so - */ -#if IS_ENABLED(CONFIG_SET_FIDVID) -void init_fidvid_ap(u32 bsp_apicid, u32 apicid) { } -#endif - -static void sio_setup(void) -{ - uint32_t dword; - uint8_t byte; - - byte = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); - byte |= 0x20; - pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); - - dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); - dword |= (1 << 0); - pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); -} - -//CPU 1 mem is on SMBUS_HUB channel 2, and CPU 2 mem is on channel 1. -#define RC0 (2 << 8) -#define RC1 (1 << 8) - -void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) -{ - static const uint16_t spd_addr[] = { - // Node 0 - RC0|DIMM0, RC0|DIMM2, RC0|DIMM4, RC0|DIMM6, - RC0|DIMM1, RC0|DIMM3, RC0|DIMM5, RC0|DIMM7, - // node 1 - RC1|DIMM0, RC1|DIMM2, RC1|DIMM4, RC1|DIMM6, - RC1|DIMM1, RC1|DIMM3, RC1|DIMM5, RC1|DIMM7, - }; - - unsigned bsp_apicid = 0; - int needs_reset; - struct sys_info *sysinfo = &sysinfo_car; - - if (!cpu_init_detectedx && boot_cpu()) { - /* Nothing special needs to be done to find bus 0 */ - /* Allow the HT devices to be found */ - enumerate_ht_chain(); - sio_setup(); - } - - if (bist == 0) { - //init_cpus(cpu_init_detectedx); - bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); - } - - winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); - console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); - - setup_ms9282_resource_map(); - - setup_coherent_ht_domain(); - - wait_all_core0_started(); - -#if IS_ENABLED(CONFIG_LOGICAL_CPUS) - // It is said that we should start core1 after all core0 launched - start_other_cores(); - //wait_all_other_cores_started(bsp_apicid); -#endif - ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn - - init_timer(); /* Need to use TMICT to synchronize FID/VID. */ - - needs_reset = optimize_link_coherent_ht(); - needs_reset |= optimize_link_incoherent_ht(sysinfo); - needs_reset |= mcp55_early_setup_x(); - if (needs_reset) { - printk(BIOS_INFO, "ht reset -\n"); - soft_reset(); - } - - //It's the time to set ctrl now; - fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); - - enable_smbus(); - - sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo); -} |