summaryrefslogtreecommitdiff
path: root/src/mainboard/msi
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/msi')
-rw-r--r--src/mainboard/msi/ms7721/devicetree.cb267
1 files changed, 133 insertions, 134 deletions
diff --git a/src/mainboard/msi/ms7721/devicetree.cb b/src/mainboard/msi/ms7721/devicetree.cb
index 35079255ad..d3991f1bb1 100644
--- a/src/mainboard/msi/ms7721/devicetree.cb
+++ b/src/mainboard/msi/ms7721/devicetree.cb
@@ -23,142 +23,141 @@ chip northbridge/amd/agesa/family15tn/root_complex
device domain 0 on
subsystemid 0x1022 0x1410 inherit
- chip northbridge/amd/agesa/family15tn # CPU side of HT root complex
-
- chip northbridge/amd/agesa/family15tn # PCI side of HT root complex
- device pci 0.0 on end # Root Complex
- device pci 0.2 on end # IOMMU
- device pci 1.0 on end # Internal Graphics P2P bridge 0x990e
- device pci 1.1 on end # Internal Multimedia
- device pci 2.0 on end # PCIe x16
- device pci 3.0 off end # -
- device pci 4.0 on end # PCIE Realtek LAN
- device pci 5.0 on end # PCIE x1 (1)
- device pci 6.0 on end # PCIE x1 (2)
- device pci 7.0 off end # LAN
- device pci 8.0 off end # NB/SB Link P2P bridge
- end #chip northbridge/amd/agesa/family15tn # PCI side of HT root complex
-
- chip southbridge/amd/agesa/hudson # it is under NB/SB Link, but on the same pci bus
- device pci 10.0 on end # USB XHCI
- device pci 10.1 on end # USB XHCI
- device pci 11.0 on end # SATA
- device pci 12.0 on end # USB OHCI
- device pci 12.2 on end # USB EHCI
- device pci 13.0 on end # USB OHCI
- device pci 13.2 on end # USB EHCI
- device pci 14.0 on # SMBUS
- chip drivers/generic/generic #dimm 0
- device i2c 50 on end # 7-bit SPD address
+ chip northbridge/amd/agesa/family15tn
+ device pci 0.0 on end # Root Complex
+ device pci 0.2 on end # IOMMU
+ device pci 1.0 on end # Internal Graphics P2P bridge 0x990e
+ device pci 1.1 on end # Internal Multimedia
+ device pci 2.0 on end # PCIe x16
+ device pci 3.0 off end # -
+ device pci 4.0 on end # PCIE Realtek LAN
+ device pci 5.0 on end # PCIE x1 (1)
+ device pci 6.0 on end # PCIE x1 (2)
+ device pci 7.0 off end # LAN
+ device pci 8.0 off end # NB/SB Link P2P bridge
+ end #chip northbridge/amd/agesa/family15tn
+
+ chip southbridge/amd/agesa/hudson
+ device pci 10.0 on end # USB XHCI
+ device pci 10.1 on end # USB XHCI
+ device pci 11.0 on end # SATA
+ device pci 12.0 on end # USB OHCI
+ device pci 12.2 on end # USB EHCI
+ device pci 13.0 on end # USB OHCI
+ device pci 13.2 on end # USB EHCI
+ device pci 14.0 on # SMBUS
+ chip drivers/generic/generic #dimm 0
+ device i2c 50 on end # 7-bit SPD address
+ end
+ chip drivers/generic/generic #dimm 1
+ device i2c 51 on end # 7-bit SPD address
+ end
+ end # SM
+ device pci 14.1 off end # IDE 0x439c
+ device pci 14.2 on end # Azalia (Audio)
+ device pci 14.3 on # LPC 0x439d
+ chip superio/fintek/f71869ad
+ register "multi_function_register_1" = "0x01"
+ register "multi_function_register_2" = "0x0f"
+ register "multi_function_register_3" = "0x2f"
+ register "multi_function_register_4" = "0x04"
+ register "multi_function_register_5" = "0x3e"
+
+ # HWM configuration registers
+ register "hwm_smbus_address" = "0x98"
+ register "hwm_smbus_control_reg" = "0x02"
+ register "hwm_fan_type_sel_reg" = "0x00"
+ register "hwm_fan1_temp_adj_rate_reg" = "0x33"
+ register "hwm_fan_mode_sel_reg" = "0x07"
+ register "hwm_fan1_idx_rpm_mode" = "0x0e"
+ register "hwm_fan1_seg1_speed_count" = "0xff"
+ register "hwm_fan1_seg2_speed_count" = "0x0e"
+ register "hwm_fan1_seg3_speed_count" = "0x07"
+ register "hwm_fan1_temp_map_sel" = "0x8c"
+ register "hwm_temp_sensor_type" = "0x08"
+
+ device pnp 4e.00 off end
+ device pnp 4e.01 on # COM1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
end
- chip drivers/generic/generic #dimm 1
- device i2c 51 on end # 7-bit SPD address
+ device pnp 4e.02 off # COM2 (Level converter not populated, but may be usable?)
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 4e.03 on # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 5
+ drq 0x74 = 3
+ irq 0xf0 = 0x44 # PRT Mode Select Register
+ end
+ device pnp 4e.04 on # Hardware Monitor
+ io 0x60 = 0x225 # Fintek datasheet says 0x295.
+ irq 0x70 = 0
+ end
+ device pnp 4e.05 on # KBC
+ io 0x60 = 0x060
+ irq 0x70 = 1 # Keyboard IRQ
+ irq 0x72 = 12 # Mouse IRQ
+ end
+ device pnp 4e.06 on # GPIO
+ # ! GPIO config is disabled because the code in romstage.c
+ # ! has already taken care of it
+ #io 0x60 = 0xa00
+ #irq 0xe0 = 0x04 # GPIO1 output
+ #irq 0xe1 = 0xff # GPIO1 output data
+ #irq 0xe3 = 0x04 # GPIO1 drive enable
+ #irq 0xe4 = 0x00 # GPIO1 PME enable
+ #irq 0xe5 = 0x00 # GPIO1 input detect select
+ #irq 0xe6 = 0x40 # GPIO1 event status
+
+ #irq 0xd0 = 0x00 # GPIO2 output
+ #irq 0xd1 = 0xff # GPIO2 output data
+ #irq 0xd3 = 0x00 # GPIO2 drive enable
+
+ #irq 0xc0 = 0x00 # GPIO3 output
+ #irq 0xc1 = 0xff # GPIO3 output data
+
+ #irq 0xb0 = 0x04 # GPIO4 output
+ #irq 0xb1 = 0x04 # GPIO4 output data
+ #irq 0xb3 = 0x04 # GPIO4 drive enable
+ #irq 0xb4 = 0x00 # GPIO4 PME enable
+ #irq 0xb5 = 0x00 # GPIO4 input detect select
+ #irq 0xb6 = 0x00 # GPIO4 event status
+
+ #irq 0xa0 = 0x00 # GPIO5 output
+ #irq 0xa1 = 0x1f # GPIO5 output data
+ #irq 0xa3 = 0x00 # GPIO5 drive enable
+ #irq 0xa4 = 0x00 # GPIO5 PME enable
+ #irq 0xa5 = 0xff # GPIO5 input detect select
+ #irq 0xa6 = 0xe0 # GPIO5 event status
+
+ #irq 0x90 = 0x00 # GPIO6 output
+ #irq 0x91 = 0xff # GPIO6 output data
+ #irq 0x93 = 0x00 # GPIO6 drive enable
+
+ #irq 0x80 = 0x00 # GPIO7 output
+ #irq 0x81 = 0xff # GPIO7 output data
+ #irq 0x83 = 0x00 # GPIO7 drive enable
end
- end # SM
- device pci 14.1 off end # IDE 0x439c
- device pci 14.2 on end # Azalia (Audio)
- device pci 14.3 on # LPC 0x439d
- chip superio/fintek/f71869ad
- register "multi_function_register_1" = "0x01"
- register "multi_function_register_2" = "0x0f"
- register "multi_function_register_3" = "0x2f"
- register "multi_function_register_4" = "0x04"
- register "multi_function_register_5" = "0x3e"
-
- # HWM configuration registers
- register "hwm_smbus_address" = "0x98"
- register "hwm_smbus_control_reg" = "0x02"
- register "hwm_fan_type_sel_reg" = "0x00"
- register "hwm_fan1_temp_adj_rate_reg" = "0x33"
- register "hwm_fan_mode_sel_reg" = "0x07"
- register "hwm_fan1_idx_rpm_mode" = "0x0e"
- register "hwm_fan1_seg1_speed_count" = "0xff"
- register "hwm_fan1_seg2_speed_count" = "0x0e"
- register "hwm_fan1_seg3_speed_count" = "0x07"
- register "hwm_fan1_temp_map_sel" = "0x8c"
- register "hwm_temp_sensor_type" = "0x08"
-
- device pnp 4e.00 off end
- device pnp 4e.01 on # COM1
- io 0x60 = 0x3f8
- irq 0x70 = 4
- end
- device pnp 4e.02 off # COM2 (Level converter not populated, but may be usable?)
- io 0x60 = 0x2f8
- irq 0x70 = 3
- end
- device pnp 4e.03 on # Parallel Port
- io 0x60 = 0x378
- irq 0x70 = 5
- drq 0x74 = 3
- irq 0xf0 = 0x44 # PRT Mode Select Register
- end
- device pnp 4e.04 on # Hardware Monitor
- io 0x60 = 0x225 # Fintek datasheet says 0x295.
- irq 0x70 = 0
- end
- device pnp 4e.05 on # KBC
- io 0x60 = 0x060
- irq 0x70 = 1 # Keyboard IRQ
- irq 0x72 = 12 # Mouse IRQ
- end
- device pnp 4e.06 on # GPIO
- # ! GPIO config is disabled because the code in romstage.c
- # ! has already taken care of it
- #io 0x60 = 0xa00
- #irq 0xe0 = 0x04 # GPIO1 output
- #irq 0xe1 = 0xff # GPIO1 output data
- #irq 0xe3 = 0x04 # GPIO1 drive enable
- #irq 0xe4 = 0x00 # GPIO1 PME enable
- #irq 0xe5 = 0x00 # GPIO1 input detect select
- #irq 0xe6 = 0x40 # GPIO1 event status
-
- #irq 0xd0 = 0x00 # GPIO2 output
- #irq 0xd1 = 0xff # GPIO2 output data
- #irq 0xd3 = 0x00 # GPIO2 drive enable
-
- #irq 0xc0 = 0x00 # GPIO3 output
- #irq 0xc1 = 0xff # GPIO3 output data
-
- #irq 0xb0 = 0x04 # GPIO4 output
- #irq 0xb1 = 0x04 # GPIO4 output data
- #irq 0xb3 = 0x04 # GPIO4 drive enable
- #irq 0xb4 = 0x00 # GPIO4 PME enable
- #irq 0xb5 = 0x00 # GPIO4 input detect select
- #irq 0xb6 = 0x00 # GPIO4 event status
-
- #irq 0xa0 = 0x00 # GPIO5 output
- #irq 0xa1 = 0x1f # GPIO5 output data
- #irq 0xa3 = 0x00 # GPIO5 drive enable
- #irq 0xa4 = 0x00 # GPIO5 PME enable
- #irq 0xa5 = 0xff # GPIO5 input detect select
- #irq 0xa6 = 0xe0 # GPIO5 event status
-
- #irq 0x90 = 0x00 # GPIO6 output
- #irq 0x91 = 0xff # GPIO6 output data
- #irq 0x93 = 0x00 # GPIO6 drive enable
-
- #irq 0x80 = 0x00 # GPIO7 output
- #irq 0x81 = 0xff # GPIO7 output data
- #irq 0x83 = 0x00 # GPIO7 drive enable
- end
-
- device pnp 4e.07 on end # WDT
- device pnp 4e.08 off end # CIR
- device pnp 4e.0a on end # PME
- end # f71869ad
- end #device pci 14.3 # LPC
- device pci 14.4 on end # PCI 0x4384 (PCI slot on board)
- device pci 14.5 on end # USB OHCI
- device pci 14.6 off end # Gec
- device pci 14.7 off end # SD
- device pci 15.0 off end # unused
- device pci 15.1 off end # unused
- device pci 15.2 off end # unused
- device pci 15.3 off end # unused
-
- end #chip southbridge/amd/agesa/hudson
+ device pnp 4e.07 on end # WDT
+ device pnp 4e.08 off end # CIR
+ device pnp 4e.0a on end # PME
+ end # f71869ad
+ end #device pci 14.3 # LPC
+ device pci 14.4 on end # PCI 0x4384 (PCI slot on board)
+ device pci 14.5 on end # USB OHCI
+ device pci 14.6 off end # Gec
+ device pci 14.7 off end # SD
+ device pci 15.0 off end # unused
+ device pci 15.1 off end # unused
+ device pci 15.2 off end # unused
+ device pci 15.3 off end # unused
+
+ end #chip southbridge/amd/agesa/hudson
+
+ chip northbridge/amd/agesa/family15tn
device pci 18.0 on end
device pci 18.1 on end
device pci 18.2 on end
@@ -171,7 +170,7 @@ chip northbridge/amd/agesa/family15tn/root_complex
{ {0xA0, 0xA4}, {0xA2, 0xA6}, }, // socket 0 - Channel 0 & 1 - 8-bit SPD addresses
{ {0x00, 0x00}, {0x00, 0x00}, }, // socket 1 - Channel 0 & 1 - 8-bit SPD addresses
}"
+ end
- end #chip northbridge/amd/agesa/family15tn # CPU side of HT root complex
end #domain
end #chip northbridge/amd/agesa/family15tn/root_complex