summaryrefslogtreecommitdiff
path: root/src/mainboard/newisys/khepri/Config.lb
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/newisys/khepri/Config.lb')
-rw-r--r--src/mainboard/newisys/khepri/Config.lb345
1 files changed, 242 insertions, 103 deletions
diff --git a/src/mainboard/newisys/khepri/Config.lb b/src/mainboard/newisys/khepri/Config.lb
index 2050b01367..ce5b9add67 100644
--- a/src/mainboard/newisys/khepri/Config.lb
+++ b/src/mainboard/newisys/khepri/Config.lb
@@ -3,36 +3,178 @@ uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
uses MAINBOARD
uses ARCH
-#
-#
+uses FALLBACK_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_STREAM_START
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+
###
-### Set all of the defaults for an x86 architecture
+### Build options
###
-#
-#
+
+##
+## Build code for the fallback boot
+##
+option HAVE_FALLBACK_BOOT=1
+
+##
+## Build code to reset the motherboard from linuxBIOS
+##
+option HAVE_HARD_RESET=1
+
+##
+## Build code to export a programmable irq routing table
+##
+option HAVE_PIRQ_TABLE=1
+option IRQ_SLOT_COUNT=7
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+option HAVE_MP_TABLE=1
+
+##
+## Build code to export a CMOS option table
+##
+option HAVE_OPTION_TABLE=1
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+##
+option CONFIG_SMP=1
+option CONFIG_MAX_CPUS=2
+
+##
+## Build code to setup a generic IOAPIC
+##
+option CONFIG_IOAPIC=1
+
+##
+## Clean up the motherboard id strings
+##
+option MAINBOARD_PART_NUMBER="KHEPRI"
+option MAINBOARD_VENDOR="NEWISYS"
+
###
-### Build the objects we have code for in this directory.
+### LinuxBIOS layout values
###
-##object mainboard.o
+
+## ROM_SIZE is the size of boot ROM that this board will use.
+option ROM_SIZE = 524288
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+option ROM_IMAGE_SIZE = 65536
+
+##
+## Use a small 8K stack
+##
+option STACK_SIZE=0x2000
+
+##
+## Use a small 16K heap
+##
+option HEAP_SIZE=0x4000
+
+##
+## Only use the option table in a normal image
+##
+option USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+if USE_FALLBACK_IMAGE
+ option ROM_SECTION_SIZE = FALLBACK_SIZE
+ option ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+ option ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
+ option ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+option PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+option CONFIG_ROM_STREAM = 1
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+option _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+option XIP_ROM_SIZE=65536
+option XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+##
+## Set all of the defaults for an x86 architecture
+##
+
+arch i386 end
+#cpu k8 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+#object mainboard.o
driver mainboard.o
-object static_devices.o
+#object static_devices.o
if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
-#
-arch i386 end
-#cpu k8 end
-#
-###
-### Build our 16 bit and 32 bit linuxBIOS entry code
-###
+object reset.o
+
+##
+## Romcc output
+##
+makerule ./failover.E
+ depends "$(MAINBOARD)/failover.c"
+ action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
+end
+
+makerule ./failover.inc
+ depends "./failover.E ./romcc"
+ action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"
+end
+
+makerule ./auto.E
+ depends "$(MAINBOARD)/auto.c"
+ action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
+end
+makerule ./auto.inc
+ depends "./auto.E ./romcc"
+ action "./romcc -mcpu=k8 -O ./auto.E > auto.inc"
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
mainboardinit cpu/i386/entry16.inc
mainboardinit cpu/i386/entry32.inc
ldscript /cpu/i386/entry16.lds
ldscript /cpu/i386/entry32.lds
-#
-###
-### Build our reset vector (This is where linuxBIOS is entered)
-###
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
if USE_FALLBACK_IMAGE
mainboardinit cpu/i386/reset16.inc
ldscript /cpu/i386/reset16.lds
@@ -40,109 +182,106 @@ else
mainboardinit cpu/i386/reset32.inc
ldscript /cpu/i386/reset32.lds
end
-#
-#### Should this be in the northbridge code?
+
+### Should this be in the northbridge code?
mainboardinit arch/i386/lib/cpu_reset.inc
-#
-###
-### Include an id string (For safe flashing)
-###
+
+##
+## Include an id string (For safe flashing)
+##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
-#
-####
-#### This is the early phase of linuxBIOS startup
-#### Things are delicate and we test to see if we should
-#### failover to another image.
-####
-#option MAX_REBOOT_CNT=2
-if USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
-end
-#
-###
-### Setup our mtrrs
-###
+
+##
+## Setup our mtrrs
+##
mainboardinit cpu/k8/earlymtrr.inc
+
###
-### Only the bootstrap cpu makes it here.
-### Failover if we need to
+### This is the early phase of linuxBIOS startup
+### Things are delicate and we test to see if we should
+### failover to another image.
###
-#
if USE_FALLBACK_IMAGE
- mainboardinit ./failover.inc
+ ldscript /arch/i386/lib/failover.lds
+ mainboardinit ./failover.inc
end
-#
-#
-###
-### Setup the serial port
-###
-#mainboardinit superiowinbond/w83627hf/setup_serial.inc
-mainboardinit pc80/serial.inc
-mainboardinit arch/i386/lib/console.inc
-#
-####
-#### O.k. We aren't just an intermediary anymore!
-####
-#
###
-### When debugging disable the watchdog timer
+### O.k. We aren't just an intermediary anymore!
###
-##option MAXIMUM_CONSOLE_LOGLEVEL=7
-#default MAXIMUM_CONSOLE_LOGLEVEL=7
-#
-#if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc end
-#
-###
-### Romcc output
-###
-#makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E"
-#makerule ./failover.inc dep "./romcc ./failover.E" act "./romcc -O ./failover.E > failover.inc"
-#mainboardinit .failover.inc
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c"
- action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
-end
-
-makerule ./failover.inc
- depends "./romcc ./failover.E"
- action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c"
- action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
-end
-makerule ./auto.inc
- depends "./romcc ./auto.E"
- action "./romcc -mcpu=k8 -O ./auto.E > auto.inc"
-end
+##
+## Setup RAM
+##
mainboardinit cpu/k8/enable_mmx_sse.inc
mainboardinit ./auto.inc
mainboardinit cpu/k8/disable_mmx_sse.inc
-#
-###
-### Include the secondary Configuration files
-###
-northbridge amd/amdk8
-end
-southbridge amd/amd8111 "amd8111"
-end
-southbridge amd/amd8131 "amd8131"
+
+##
+## Include the secondary Configuration files
+##
+dir /pc80
+config chip.h
+
+northbridge amd/amdk8 "mc0"
+ pci 0:18.0
+ pci 0:18.0
+ pci 0:18.0
+ pci 0:18.1
+ pci 0:18.2
+ pci 0:18.3
+ southbridge amd/amd8131 "amd8131"
+ pci 1:0.0
+ pci 1:0.1
+ pci 1:1.0
+ pci 1:1.1
+ end
+ southbridge amd/amd8111 "amd8111"
+ pci 1:0.0
+ pci 1:1.0
+ pci 1:1.1
+ pci 1:1.2
+ pci 1:1.3
+ pci 1:1.5
+ pci 1:1.6
+ superio NSC/pc87360
+ pnp 1:2e.0
+ pnp 1:2e.1
+ pnp 1:2e.2
+ pnp 1:2e.3
+ pnp 1:2e.4
+ pnp 1:2e.5
+ pnp 1:2e.6
+ pnp 1:2e.7
+ pnp 1:2e.8
+ pnp 1:2e.9
+ pnp 1:2e.a
+ register "com1" = "{1, 0, 0x3f8, 4}"
+ register "lpt" = "{1}"
+ end
+ end
end
-#mainboardinit archi386/smp/secondary.inc
-superio NSC/pc87360
- register "com1" = "{1}"
- register "lpt" = "{1}"
+
+northbridge amd/amdk8 "mc1"
+ pci 0:19.0
+ pci 0:19.0
+ pci 0:19.0
+ pci 0:19.1
+ pci 0:19.2
+ pci 0:19.3
end
-dir /pc80
-##dir /src/superio/winbond/w83627hf
-#dir /cpu/k8
-cpu k8 "cpu0"
- register "up" = "{.chip = &amd8111, .ht_width=8, .ht_speed=200}"
+
+cpu k8 "cpu0"
+ register "up" = "{ .chip = &amd8131, .ht_width=16, .ht_speed=600 }"
end
cpu k8 "cpu1"
end
+##
+## Include the old serial code for those few places that still need it.
+##
+mainboardinit pc80/serial.inc
+mainboardinit arch/i386/lib/console.inc
+