diff options
Diffstat (limited to 'src/mainboard/newisys/khepri/auto.c')
| -rw-r--r-- | src/mainboard/newisys/khepri/auto.c | 239 |
1 files changed, 239 insertions, 0 deletions
diff --git a/src/mainboard/newisys/khepri/auto.c b/src/mainboard/newisys/khepri/auto.c new file mode 100644 index 0000000000..ca19245293 --- /dev/null +++ b/src/mainboard/newisys/khepri/auto.c @@ -0,0 +1,239 @@ +#define ASSEMBLY 1 +#define MAXIMUM_CONSOLE_LOGLEVEL 9 +#define DEFAULT_CONSOLE_LOGLEVEL 9 + +#include <stdint.h> +#include <device/pci_def.h> +#include <cpu/p6/apic.h> +#include <arch/io.h> +#include <device/pnp.h> +#include <arch/romcc_io.h> +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" +#include "northbridge/amd/amdk8/early_ht.c" +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/k8/apic_timer.c" +#include "lib/delay.c" +#include "cpu/p6/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "debug.c" + +static void memreset_setup(void) +{ + /* Set the memreset low */ + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28); + /* Ensure the BIOS has control of the memory lines */ + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29); +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + udelay(800); + /* Set memreset_high */ + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28); + udelay(90); +} + +static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) +{ + /* Routing Table Node i + * + * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c + * i: 0, 1, 2, 3, 4, 5, 6, 7 + * + * [ 0: 3] Request Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + * [11: 8] Response Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + * [19:16] Broadcast route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + */ + + uint32_t ret=0x00010101; /* default row entry */ + + static const unsigned int rows_2p[2][2] = { + { 0x00050101, 0x00010404 }, + { 0x00010404, 0x00050101 } + }; + + if(maxnodes>2) { + print_debug("this mainboard is only designed for 2 cpus\r\n"); + maxnodes=2; + } + + + if (!(node>=maxnodes || row>=maxnodes)) { + ret=rows_2p[node][row]; + } + + return ret; +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +/* no specific code here. this should go away completely */ +static void coherent_ht_mainboard(unsigned cpus) +{ +} + +#include "northbridge/amd/amdk8/cpu_ldtstop.c" +#include "southbridge/amd/amd8111/amd8111_ldtstop.c" + +#include "northbridge/amd/amdk8/raminit.c" +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" + +static void enable_lapic(void) +{ + + msr_t msr; + msr = rdmsr(0x1b); + msr.hi &= 0xffffff00; + msr.lo &= 0x000007ff; + msr.lo |= APIC_DEFAULT_BASE | (1 << 11); + wrmsr(0x1b, msr); +} + +static void stop_this_cpu(void) +{ + unsigned apicid; + apicid = apic_read(APIC_ID) >> 24; + + /* Send an APIC INIT to myself */ + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); + apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT); + /* Wait for the ipi send to finish */ + apic_wait_icr_idle(); + + /* Deassert the APIC INIT */ + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid)); + apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT); + /* Wait for the ipi send to finish */ + apic_wait_icr_idle(); + + /* If I haven't halted spin forever */ + for(;;) { + hlt(); + } +} + +#define PC87360_FDC 0x00 +#define PC87360_PP 0x01 +#define PC87360_SP2 0x02 +#define PC87360_SP1 0x03 +#define PC87360_SWC 0x04 +#define PC87360_KBCM 0x05 +#define PC87360_KBCK 0x06 +#define PC87360_GPIO 0x07 +#define PC87360_ACB 0x08 +#define PC87360_FSCM 0x09 +#define PC87360_WDT 0x0A + +static void pc87360_enable_serial(void) +{ + pnp_set_logical_device(SIO_BASE, PC87360_SP1); + pnp_set_enable(SIO_BASE, 1); + pnp_set_iobase0(SIO_BASE, 0x3f8); +} + +#define FIRST_CPU 1 +#define SECOND_CPU 0 +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) +static void main(void) +{ + /* + * GPIO28 of 8111 will control H0_MEMRESET_L + * GPIO29 of 8111 will control H1_MEMRESET_L + */ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, + .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, + .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + }, +#endif + }; + if (cpu_init_detected()) { + asm("jmp __cpu_reset"); + } + enable_lapic(); + init_timer(); + if (!boot_cpu()) { + stop_this_cpu(); + } + pc87360_enable_serial(); + uart_init(); + console_init(); + setup_default_resource_map(); + setup_coherent_ht_domain(); + enumerate_ht_chain(0); + distinguish_cpu_resets(0); + +#if 0 + print_pci_devices(); +#endif + enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 1 + dump_pci_devices(); +#endif +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 2)); +#endif + + /* Check all of memory */ +#if 0 + msr_t msr; + msr = rdmsr(TOP_MEM); + print_debug("TOP_MEM: "); + print_debug_hex32(msr.hi); + print_debug_hex32(msr.lo); + print_debug("\r\n"); +#endif +#if 0 + ram_check(0x00000000, msr.lo); +#else +#if TOTAL_CPUS < 2 + /* Check 16MB of memory @ 0*/ + ram_check(0x00000000, 0x01000); +#else + /* Check 16MB of memory @ 2GB */ + ram_check(0x80000000, 0x81000000); +#endif +#endif +} |