summaryrefslogtreecommitdiff
path: root/src/mainboard/nvidia
diff options
context:
space:
mode:
Diffstat (limited to 'src/mainboard/nvidia')
-rw-r--r--src/mainboard/nvidia/l1_2pvv/Config.lb62
-rw-r--r--src/mainboard/nvidia/l1_2pvv/Options.lb256
-rw-r--r--src/mainboard/nvidia/l1_2pvv/apc_auto.c4
-rw-r--r--src/mainboard/nvidia/l1_2pvv/cache_as_ram_auto.c24
4 files changed, 173 insertions, 173 deletions
diff --git a/src/mainboard/nvidia/l1_2pvv/Config.lb b/src/mainboard/nvidia/l1_2pvv/Config.lb
index 29725cf8a1..978e88f795 100644
--- a/src/mainboard/nvidia/l1_2pvv/Config.lb
+++ b/src/mainboard/nvidia/l1_2pvv/Config.lb
@@ -19,8 +19,8 @@
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
-## XIP_ROM_SIZE must be a power of 2.
-default XIP_ROM_SIZE = 64 * 1024
+## CONFIG_XIP_ROM_SIZE must be a power of 2.
+default CONFIG_XIP_ROM_SIZE = 64 * 1024
include /config/failovercalculation.lb
arch i386 end
@@ -33,33 +33,33 @@ driver mainboard.o
#needed by irq_tables and mptable and acpi_tables
object get_bus_conf.o
-if HAVE_MP_TABLE object mptable.o end
-if HAVE_PIRQ_TABLE object irq_tables.o end
+if CONFIG_HAVE_MP_TABLE object mptable.o end
+if CONFIG_HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
-if HAVE_ACPI_TABLES
+if CONFIG_HAVE_ACPI_TABLES
object acpi_tables.o
object fadt.o
makerule dsdt.c
- depends "$(MAINBOARD)/dx/dsdt_lb.dsl"
- action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/dsdt_lb.dsl"
+ depends "$(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl"
+ action "/usr/sbin/iasl -tc $(CONFIG_MAINBOARD)/dx/dsdt_lb.dsl"
action "mv dsdt_lb.hex dsdt.c"
end
object ./dsdt.o
#./ssdt.o is moved to northbridge/amd/amdk8/Config.lb
- if ACPI_SSDTX_NUM
+ if CONFIG_ACPI_SSDTX_NUM
makerule ssdt6.c
- depends "$(MAINBOARD)/dx/pci6.asl"
- action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/pci6.asl"
+ depends "$(CONFIG_MAINBOARD)/dx/pci6.asl"
+ action "/usr/sbin/iasl -tc $(CONFIG_MAINBOARD)/dx/pci6.asl"
action "perl -pi -e 's/AmlCode/AmlCode_ssdt6/g' pci6.hex"
action "mv pci6.hex ssdt6.c"
end
object ./ssdt6.o
makerule ssdt5.c
- depends "$(MAINBOARD)/dx/pci5.asl"
- action "/usr/sbin/iasl -tc $(MAINBOARD)/dx/pci5.asl"
+ depends "$(CONFIG_MAINBOARD)/dx/pci5.asl"
+ action "/usr/sbin/iasl -tc $(CONFIG_MAINBOARD)/dx/pci5.asl"
action "perl -pi -e 's/AmlCode/AmlCode_ssdt5/g' pci5.hex"
action "mv pci5.hex ssdt5.c"
end
@@ -69,24 +69,24 @@ end
if CONFIG_USE_INIT
makerule ./cache_as_ram_auto.o
- depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/cache_as_ram_auto.c -o $@"
+ depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
end
else
makerule ./cache_as_ram_auto.inc
- depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(MAINBOARD)/cache_as_ram_auto.c -o $@"
+ depends "$(CONFIG_MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) $(DEBUG_CFLAGS) -I$(TOP)/src -I. -c -S $(CONFIG_MAINBOARD)/cache_as_ram_auto.c -o $@"
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
end
end
-if USE_FAILOVER_IMAGE
+if CONFIG_USE_FAILOVER_IMAGE
else
if CONFIG_AP_CODE_IN_CAR
makerule ./apc_auto.o
- depends "$(MAINBOARD)/apc_auto.c option_table.h"
- action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(MAINBOARD)/apc_auto.c -o $@"
+ depends "$(CONFIG_MAINBOARD)/apc_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) $(CFLAGS) $(CPPFLAGS) -I$(TOP)/src -I. -c $(CONFIG_MAINBOARD)/apc_auto.c -o $@"
end
ldscript /arch/i386/init/ldscript_apc.lb
end
@@ -96,13 +96,13 @@ end
##
## Build our 16 bit and 32 bit coreboot entry code
##
-if HAVE_FAILOVER_BOOT
- if USE_FAILOVER_IMAGE
+if CONFIG_HAVE_FAILOVER_BOOT
+ if CONFIG_USE_FAILOVER_IMAGE
mainboardinit cpu/x86/16bit/entry16.inc
ldscript /cpu/x86/16bit/entry16.lds
end
else
- if USE_FALLBACK_IMAGE
+ if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/entry16.inc
ldscript /cpu/x86/16bit/entry16.lds
end
@@ -121,8 +121,8 @@ mainboardinit cpu/x86/32bit/entry32.inc
##
## Build our reset vector (This is where coreboot is entered)
##
-if HAVE_FAILOVER_BOOT
- if USE_FAILOVER_IMAGE
+if CONFIG_HAVE_FAILOVER_BOOT
+ if CONFIG_USE_FAILOVER_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
@@ -130,7 +130,7 @@ if HAVE_FAILOVER_BOOT
ldscript /cpu/x86/32bit/reset32.lds
end
else
- if USE_FALLBACK_IMAGE
+ if CONFIG_USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/x86/16bit/reset16.lds
else
@@ -148,13 +148,13 @@ ldscript /southbridge/nvidia/mcp55/id.lds
##
## ROMSTRAP table for MCP55
##
-if HAVE_FAILOVER_BOOT
- if USE_FAILOVER_IMAGE
+if CONFIG_HAVE_FAILOVER_BOOT
+ if CONFIG_USE_FAILOVER_IMAGE
mainboardinit southbridge/nvidia/mcp55/romstrap.inc
ldscript /southbridge/nvidia/mcp55/romstrap.lds
end
else
- if USE_FALLBACK_IMAGE
+ if CONFIG_USE_FALLBACK_IMAGE
mainboardinit southbridge/nvidia/mcp55/romstrap.inc
ldscript /southbridge/nvidia/mcp55/romstrap.lds
end
@@ -170,12 +170,12 @@ end
### Things are delicate and we test to see if we should
### failover to another image.
###
-if HAVE_FAILOVER_BOOT
- if USE_FAILOVER_IMAGE
+if CONFIG_HAVE_FAILOVER_BOOT
+ if CONFIG_USE_FAILOVER_IMAGE
ldscript /arch/i386/lib/failover_failover.lds
end
else
- if USE_FALLBACK_IMAGE
+ if CONFIG_USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
end
end
diff --git a/src/mainboard/nvidia/l1_2pvv/Options.lb b/src/mainboard/nvidia/l1_2pvv/Options.lb
index 2f455f4265..4f032fb7cf 100644
--- a/src/mainboard/nvidia/l1_2pvv/Options.lb
+++ b/src/mainboard/nvidia/l1_2pvv/Options.lb
@@ -19,90 +19,90 @@
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
-uses HAVE_MP_TABLE
+uses CONFIG_HAVE_MP_TABLE
uses CONFIG_CBFS
-uses HAVE_PIRQ_TABLE
-uses HAVE_ACPI_TABLES
-uses HAVE_ACPI_RESUME
-uses ACPI_SSDTX_NUM
-uses USE_FALLBACK_IMAGE
-uses USE_FAILOVER_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_FAILOVER_BOOT
-uses HAVE_HARD_RESET
-uses IRQ_SLOT_COUNT
-uses HAVE_OPTION_TABLE
+uses CONFIG_HAVE_PIRQ_TABLE
+uses CONFIG_HAVE_ACPI_TABLES
+uses CONFIG_HAVE_ACPI_RESUME
+uses CONFIG_ACPI_SSDTX_NUM
+uses CONFIG_USE_FALLBACK_IMAGE
+uses CONFIG_USE_FAILOVER_IMAGE
+uses CONFIG_HAVE_FALLBACK_BOOT
+uses CONFIG_HAVE_FAILOVER_BOOT
+uses CONFIG_HAVE_HARD_RESET
+uses CONFIG_IRQ_SLOT_COUNT
+uses CONFIG_HAVE_OPTION_TABLE
uses CONFIG_MAX_CPUS
uses CONFIG_MAX_PHYSICAL_CPUS
uses CONFIG_LOGICAL_CPUS
uses CONFIG_IOAPIC
uses CONFIG_SMP
-uses FALLBACK_SIZE
-uses FAILOVER_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
+uses CONFIG_FALLBACK_SIZE
+uses CONFIG_FAILOVER_SIZE
+uses CONFIG_ROM_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_IMAGE_SIZE
+uses CONFIG_ROM_SECTION_SIZE
+uses CONFIG_ROM_SECTION_OFFSET
uses CONFIG_ROM_PAYLOAD
uses CONFIG_ROM_PAYLOAD_START
uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses USE_OPTION_TABLE
-uses LB_CKS_RANGE_START
-uses LB_CKS_RANGE_END
-uses LB_CKS_LOC
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses MAINBOARD
-uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
-uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses CONFIG_PAYLOAD_SIZE
+uses CONFIG_ROMBASE
+uses CONFIG_XIP_ROM_SIZE
+uses CONFIG_XIP_ROM_BASE
+uses CONFIG_STACK_SIZE
+uses CONFIG_HEAP_SIZE
+uses CONFIG_USE_OPTION_TABLE
+uses CONFIG_LB_CKS_RANGE_START
+uses CONFIG_LB_CKS_RANGE_END
+uses CONFIG_LB_CKS_LOC
+uses CONFIG_MAINBOARD_PART_NUMBER
+uses CONFIG_MAINBOARD_VENDOR
+uses CONFIG_MAINBOARD
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
uses COREBOOT_EXTRA_VERSION
-uses _RAMBASE
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_RAMBASE
+uses CONFIG_TTYS0_BAUD
+uses CONFIG_TTYS0_BASE
+uses CONFIG_TTYS0_LCS
+uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
+uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL
uses CONFIG_CONSOLE_SERIAL8250
-uses HAVE_INIT_TIMER
+uses CONFIG_HAVE_INIT_TIMER
uses CONFIG_GDB_STUB
uses CONFIG_GDB_STUB
-uses CROSS_COMPILE
+uses CONFIG_CROSS_COMPILE
uses CC
-uses HOSTCC
-uses OBJCOPY
+uses CONFIG_HOSTCC
+uses CONFIG_OBJCOPY
uses CONFIG_CONSOLE_VGA
uses CONFIG_USBDEBUG_DIRECT
uses CONFIG_PCI_ROM_RUN
-uses HW_MEM_HOLE_SIZEK
-uses HW_MEM_HOLE_SIZE_AUTO_INC
-uses K8_HT_FREQ_1G_SUPPORT
-
-uses HT_CHAIN_UNITID_BASE
-uses HT_CHAIN_END_UNITID_BASE
-uses SB_HT_CHAIN_ON_BUS0
-uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
-
-uses USE_DCACHE_RAM
-uses DCACHE_RAM_BASE
-uses DCACHE_RAM_SIZE
-uses DCACHE_RAM_GLOBAL_VAR_SIZE
+uses CONFIG_HW_MEM_HOLE_SIZEK
+uses CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC
+uses CONFIG_K8_HT_FREQ_1G_SUPPORT
+
+uses CONFIG_HT_CHAIN_UNITID_BASE
+uses CONFIG_HT_CHAIN_END_UNITID_BASE
+uses CONFIG_SB_HT_CHAIN_ON_BUS0
+uses CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY
+
+uses CONFIG_USE_DCACHE_RAM
+uses CONFIG_DCACHE_RAM_BASE
+uses CONFIG_DCACHE_RAM_SIZE
+uses CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE
uses CONFIG_USE_INIT
-uses SERIAL_CPU_INIT
+uses CONFIG_SERIAL_CPU_INIT
-uses ENABLE_APIC_EXT_ID
-uses APIC_ID_OFFSET
-uses LIFT_BSP_APIC_ID
+uses CONFIG_ENABLE_APIC_EXT_ID
+uses CONFIG_APIC_ID_OFFSET
+uses CONFIG_LIFT_BSP_APIC_ID
uses CONFIG_PCI_64BIT_PREF_MEM
@@ -110,9 +110,9 @@ uses CONFIG_LB_MEM_TOPK
uses CONFIG_AP_CODE_IN_CAR
-uses MEM_TRAIN_SEQ
+uses CONFIG_MEM_TRAIN_SEQ
-uses WAIT_BEFORE_CPUS_INIT
+uses CONFIG_WAIT_BEFORE_CPUS_INIT
uses CONFIG_USE_PRINTK_IN_CAR
@@ -121,21 +121,21 @@ uses CONFIG_USE_PRINTK_IN_CAR
###
##
-## ROM_SIZE is the size of boot ROM that this board will use.
+## CONFIG_ROM_SIZE is the size of boot ROM that this board will use.
##
-default ROM_SIZE=524288
-#default ROM_SIZE=0x100000
+default CONFIG_ROM_SIZE=524288
+#default CONFIG_ROM_SIZE=0x100000
##
-## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
+## CONFIG_FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
##
-#default FALLBACK_SIZE=131072
-#default FALLBACK_SIZE=0x40000
+#default CONFIG_FALLBACK_SIZE=131072
+#default CONFIG_FALLBACK_SIZE=0x40000
#FALLBACK: 256K-4K
-default FALLBACK_SIZE=0x3f000
+default CONFIG_FALLBACK_SIZE=0x3f000
#FAILOVER: 4K
-default FAILOVER_SIZE=0x01000
+default CONFIG_FAILOVER_SIZE=0x01000
#more 1M for pgtbl
default CONFIG_LB_MEM_TOPK=2048
@@ -143,40 +143,40 @@ default CONFIG_LB_MEM_TOPK=2048
##
## Build code for the fallback boot
##
-default HAVE_FALLBACK_BOOT=1
-default HAVE_FAILOVER_BOOT=1
+default CONFIG_HAVE_FALLBACK_BOOT=1
+default CONFIG_HAVE_FAILOVER_BOOT=1
##
## Build code to reset the motherboard from coreboot
##
-default HAVE_HARD_RESET=1
+default CONFIG_HAVE_HARD_RESET=1
##
## Build code to export a programmable irq routing table
##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=11
+default CONFIG_HAVE_PIRQ_TABLE=1
+default CONFIG_IRQ_SLOT_COUNT=11
##
## Build code to export an x86 MP table
## Useful for specifying IRQ routing values
##
-default HAVE_MP_TABLE=1
+default CONFIG_HAVE_MP_TABLE=1
## ACPI tables will be included
-default HAVE_ACPI_TABLES=0
+default CONFIG_HAVE_ACPI_TABLES=0
##
## Build code to export a CMOS option table
##
-default HAVE_OPTION_TABLE=1
+default CONFIG_HAVE_OPTION_TABLE=1
##
## Move the default coreboot cmos range off of AMD RTC registers
##
-default LB_CKS_RANGE_START=49
-default LB_CKS_RANGE_END=122
-default LB_CKS_LOC=123
+default CONFIG_LB_CKS_RANGE_START=49
+default CONFIG_LB_CKS_RANGE_END=122
+default CONFIG_LB_CKS_LOC=123
##
## Build code for SMP support
@@ -187,25 +187,25 @@ default CONFIG_MAX_CPUS=4
default CONFIG_MAX_PHYSICAL_CPUS=2
default CONFIG_LOGICAL_CPUS=1
-#default SERIAL_CPU_INIT=0
+#default CONFIG_SERIAL_CPU_INIT=0
-default ENABLE_APIC_EXT_ID=0
-default APIC_ID_OFFSET=0x10
-default LIFT_BSP_APIC_ID=1
+default CONFIG_ENABLE_APIC_EXT_ID=0
+default CONFIG_APIC_ID_OFFSET=0x10
+default CONFIG_LIFT_BSP_APIC_ID=1
#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
#2G
-#default HW_MEM_HOLE_SIZEK=0x200000
+#default CONFIG_HW_MEM_HOLE_SIZEK=0x200000
#1G
-default HW_MEM_HOLE_SIZEK=0x100000
+default CONFIG_HW_MEM_HOLE_SIZEK=0x100000
#512M
-#default HW_MEM_HOLE_SIZEK=0x80000
+#default CONFIG_HW_MEM_HOLE_SIZEK=0x80000
#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
-#default HW_MEM_HOLE_SIZE_AUTO_INC=1
+#default CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC=1
#Opteron K8 1G HT Support
-default K8_HT_FREQ_1G_SUPPORT=1
+default CONFIG_K8_HT_FREQ_1G_SUPPORT=1
#VGA Console
default CONFIG_CONSOLE_VGA=1
@@ -214,16 +214,16 @@ default CONFIG_PCI_ROM_RUN=1
#default CONFIG_USBDEBUG_DIRECT=1
#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device
-default HT_CHAIN_UNITID_BASE=0
+default CONFIG_HT_CHAIN_UNITID_BASE=0
#real SB Unit ID, default is 0x20, mean dont touch it at last
-#default HT_CHAIN_END_UNITID_BASE=0x6
+#default CONFIG_HT_CHAIN_END_UNITID_BASE=0x6
#make the SB HT chain on bus 0, default is not (0)
-default SB_HT_CHAIN_ON_BUS0=2
+default CONFIG_SB_HT_CHAIN_ON_BUS0=2
#only offset for SB chain?, default is yes(1)
-default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
+default CONFIG_SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
#allow capable device use that above 4G
#default CONFIG_PCI_64BIT_PREF_MEM=1
@@ -231,15 +231,15 @@ default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
##
## enable CACHE_AS_RAM specifics
##
-default USE_DCACHE_RAM=1
-default DCACHE_RAM_BASE=0xc8000
-default DCACHE_RAM_SIZE=0x08000
-default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
+default CONFIG_USE_DCACHE_RAM=1
+default CONFIG_DCACHE_RAM_BASE=0xc8000
+default CONFIG_DCACHE_RAM_SIZE=0x08000
+default CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
default CONFIG_USE_INIT=0
default CONFIG_AP_CODE_IN_CAR=0
-default MEM_TRAIN_SEQ=1
-default WAIT_BEFORE_CPUS_INIT=1
+default CONFIG_MEM_TRAIN_SEQ=1
+default CONFIG_WAIT_BEFORE_CPUS_INIT=1
##
## Build code to setup a generic IOAPIC
@@ -249,37 +249,37 @@ default CONFIG_IOAPIC=1
##
## Clean up the motherboard id strings
##
-default MAINBOARD_PART_NUMBER="l1_2pvv"
-default MAINBOARD_VENDOR="NVIDIA"
-default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
-default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80
+default CONFIG_MAINBOARD_PART_NUMBER="l1_2pvv"
+default CONFIG_MAINBOARD_VENDOR="NVIDIA"
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
+default CONFIG_MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2b80
###
### coreboot layout values
###
-## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
-default ROM_IMAGE_SIZE = 65536
+## CONFIG_ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
+default CONFIG_ROM_IMAGE_SIZE = 65536
##
## Use a small 8K stack
##
-default STACK_SIZE=0x2000
+default CONFIG_STACK_SIZE=0x2000
##
## Use a small 32K heap
##
-default HEAP_SIZE=0x8000
+default CONFIG_HEAP_SIZE=0x8000
##
## Only use the option table in a normal image
##
-default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE )
+default CONFIG_USE_OPTION_TABLE = (!CONFIG_USE_FALLBACK_IMAGE) && (!CONFIG_USE_FAILOVER_IMAGE )
##
## Coreboot C code runs at this location in RAM
##
-default _RAMBASE=0x00100000
+default CONFIG_RAMBASE=0x00100000
##
## Load the payload from the ROM
@@ -295,8 +295,8 @@ default CONFIG_ROM_PAYLOAD = 1
##
## The default compiler
##
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
+default CC="$(CONFIG_CROSS_COMPILE)gcc -m32"
+default CONFIG_HOSTCC="gcc"
##
## Disable the gdb stub by default
@@ -312,21 +312,21 @@ default CONFIG_USE_PRINTK_IN_CAR=1
default CONFIG_CONSOLE_SERIAL8250=1
## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
+default CONFIG_TTYS0_BAUD=115200
+#default CONFIG_TTYS0_BAUD=57600
+#default CONFIG_TTYS0_BAUD=38400
+#default CONFIG_TTYS0_BAUD=19200
+#default CONFIG_TTYS0_BAUD=9600
+#default CONFIG_TTYS0_BAUD=4800
+#default CONFIG_TTYS0_BAUD=2400
+#default CONFIG_TTYS0_BAUD=1200
# Select the serial console base port
-default TTYS0_BASE=0x3f8
+default CONFIG_TTYS0_BASE=0x3f8
# Select the serial protocol
# This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
+default CONFIG_TTYS0_LCS=0x3
##
### Select the coreboot loglevel
@@ -338,17 +338,17 @@ default TTYS0_LCS=0x3
## WARNING 5 warning conditions
## NOTICE 6 normal but significant condition
## INFO 7 informational
-## DEBUG 8 debug-level messages
+## CONFIG_DEBUG 8 debug-level messages
## SPEW 9 Way too many details
## Request this level of debugging output
-default DEFAULT_CONSOLE_LOGLEVEL=8
+default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
## At a maximum only compile in this level of debugging
-default MAXIMUM_CONSOLE_LOGLEVEL=8
+default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8
##
## Select power on after power fail setting
-default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
### End Options.lb
#
diff --git a/src/mainboard/nvidia/l1_2pvv/apc_auto.c b/src/mainboard/nvidia/l1_2pvv/apc_auto.c
index 91c3b5e187..525e940776 100644
--- a/src/mainboard/nvidia/l1_2pvv/apc_auto.c
+++ b/src/mainboard/nvidia/l1_2pvv/apc_auto.c
@@ -86,8 +86,8 @@ static void post_code(uint8_t value) {
void hardwaremain(int ret_addr)
{
- struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE
- struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
+ struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE
+ struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
struct node_core_id id;
diff --git a/src/mainboard/nvidia/l1_2pvv/cache_as_ram_auto.c b/src/mainboard/nvidia/l1_2pvv/cache_as_ram_auto.c
index d2a357da3c..a6a586a1b3 100644
--- a/src/mainboard/nvidia/l1_2pvv/cache_as_ram_auto.c
+++ b/src/mainboard/nvidia/l1_2pvv/cache_as_ram_auto.c
@@ -39,7 +39,7 @@
//if we want to wait for core1 done before DQS training, set it to 0
#define K8_SET_FIDVID_CORE0_ONLY 1
-#if K8_REV_F_SUPPORT == 1
+#if CONFIG_K8_REV_F_SUPPORT == 1
#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0
#endif
@@ -56,7 +56,7 @@
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
-#if USE_FAILOVER_IMAGE==0
+#if CONFIG_USE_FAILOVER_IMAGE==0
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#if CONFIG_USBDEBUG_DIRECT
@@ -79,7 +79,7 @@
#include "superio/winbond/w83627ehg/w83627ehg_early_serial.c"
#include "superio/winbond/w83627ehg/w83627ehg_early_init.c"
-#if USE_FAILOVER_IMAGE==0
+#if CONFIG_USE_FAILOVER_IMAGE==0
#include "cpu/x86/bist.h"
@@ -152,7 +152,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#endif
-#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1))
+#if ((CONFIG_HAVE_FAILOVER_BOOT==1) && (CONFIG_USE_FAILOVER_IMAGE == 1)) || ((CONFIG_HAVE_FAILOVER_BOOT==0) && (CONFIG_USE_FALLBACK_IMAGE == 1))
#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
@@ -220,7 +220,7 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
);
fallback_image:
-#if HAVE_FAILOVER_BOOT==1
+#if CONFIG_HAVE_FAILOVER_BOOT==1
__asm__ volatile ("jmp __fallback_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
@@ -233,21 +233,21 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
-#if HAVE_FAILOVER_BOOT==1
- #if USE_FAILOVER_IMAGE==1
+#if CONFIG_HAVE_FAILOVER_BOOT==1
+ #if CONFIG_USE_FAILOVER_IMAGE==1
failover_process(bist, cpu_init_detectedx);
#else
real_main(bist, cpu_init_detectedx);
#endif
#else
- #if USE_FALLBACK_IMAGE == 1
+ #if CONFIG_USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
#endif
}
-#if USE_FAILOVER_IMAGE==0
+#if CONFIG_USE_FAILOVER_IMAGE==0
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
@@ -260,7 +260,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
#endif
};
- struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
+ struct sys_info *sysinfo = (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
int needs_reset = 0;
unsigned bsp_apicid = 0;
@@ -271,7 +271,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
pnp_enter_ext_func_mode(SERIAL_DEV);
pnp_write_config(SERIAL_DEV, 0x24, 0);
- w83627ehg_enable_dev(SERIAL_DEV, TTYS0_BASE);
+ w83627ehg_enable_dev(SERIAL_DEV, CONFIG_TTYS0_BASE);
pnp_exit_ext_func_mode(SERIAL_DEV);
setup_mb_resource_map();
@@ -291,7 +291,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
print_debug("bsp_apicid="); print_debug_hex8(bsp_apicid); print_debug("\r\n");
-#if MEM_TRAIN_SEQ == 1
+#if CONFIG_MEM_TRAIN_SEQ == 1
set_sysinfo_in_ram(0); // in BSP so could hold all ap until sysinfo is in ram
#endif
setup_coherent_ht_domain(); // routing table and start other core0