diff options
Diffstat (limited to 'src/mainboard/ocp/deltalake/bootblock.c')
-rw-r--r-- | src/mainboard/ocp/deltalake/bootblock.c | 62 |
1 files changed, 62 insertions, 0 deletions
diff --git a/src/mainboard/ocp/deltalake/bootblock.c b/src/mainboard/ocp/deltalake/bootblock.c new file mode 100644 index 0000000000..8004170a5e --- /dev/null +++ b/src/mainboard/ocp/deltalake/bootblock.c @@ -0,0 +1,62 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <bootblock_common.h> +#include <device/pci_def.h> +#include <device/pci_ops.h> +#include <device/pnp_ops.h> +#include <intelblocks/lpc_lib.h> +#include <intelblocks/pcr.h> +#include <soc/intel/common/block/lpc/lpc_def.h> +#include <soc/pci_devs.h> +#include <soc/pcr_ids.h> +#include <superio/aspeed/ast2400/ast2400.h> +#include <superio/aspeed/common/aspeed.h> + +#define ASPEED_SIO_PORT 0x2E + +static void enable_espi_lpc_io_windows(void) +{ + /* + * Set up decoding windows on PCH over PCR. The CPUs use two of AST2500 SIO ports, + * one is connected to debug header (SUART1) and another is used as SOL (SUART2). + * For that end it is wired into BMC virtual port. + */ + uint16_t lpciod = (LPC_IOD_COMB_RANGE | LPC_IOD_COMA_RANGE); + uint16_t lpcioe = (LPC_IOE_SUPERIO_2E_2F | LPC_IOE_COMB_EN | LPC_IOE_COMA_EN); + + /* Open IO windows: 0x3f8 for com1 and 02e8 for com2 */ + pcr_or32(PID_DMI, PCR_DMI_LPCIOD, lpciod); + /* LPC I/O enable: com1 and com2 */ + pcr_or32(PID_DMI, PCR_DMI_LPCIOE, lpcioe); + + /* Enable com1 (0x3f8), com2 (02f8) and superio (0x2e) */ + pci_write_config16(PCH_DEV_LPC, LPC_IO_DECODE, lpciod); + pci_write_config16(PCH_DEV_LPC, LPC_IO_ENABLES, lpcioe); +} + +static uint8_t com_to_ast_sio(uint8_t com) +{ + switch (com) { + case 0: + return AST2400_SUART1; + case 1: + return AST2400_SUART2; + case 2: + return AST2400_SUART3; + case 4: + return AST2400_SUART4; + default: + return AST2400_SUART1; + } +} + +void bootblock_mainboard_early_init(void) +{ + /* Open IO windows */ + enable_espi_lpc_io_windows(); + + /* Configure appropriate physical port of SuperIO chip off BMC */ + const pnp_devfn_t serial_dev = PNP_DEV(ASPEED_SIO_PORT, + com_to_ast_sio(CONFIG_UART_FOR_CONSOLE)); + aspeed_enable_serial(serial_dev, CONFIG_TTYS0_BASE); +} |